Partial shading in a solar array deteriorates the maximum power generated owing to the voltage mismatch and current mismatch of the shaded solar PV module. Also, partial shading primes to multiple peaks in the P-V characteristics of the solar PV array and it has become more complex to track the Maximum Power Point (MPP). To enhance the maximum power generated by means of reducing mismatch losses, several reconfiguration techniques were suggested earlier. The mismatch losses depend not only on the amount of the area shaded but also on the shading pattern and array arrangement. This paper proposes a new pattern of positioning the PV module using the Latin square pattern without changing the total cross tied electrical connection. The proposed pattern disperses the shading uniformly within the given PV array which reduces mismatch losses significantly and increases the generation of power. The shade dispersion using proposed pattern also eliminates multiple peaks in its PV curve which enables the use of a simple algorithm to track MPP. This Latin square pattern is studied under different partial shading conditions, and the results exhibit improved performance under partial shading conditions.
Skip Nav Destination
Article navigation
September 2018
Research Article|
October 26 2018
A shade dispersion scheme using Latin square arrangement to enhance power production in solar photovoltaic array under partial shading conditions
Gurusamy Madhusudanan;
Gurusamy Madhusudanan
1
Valliammai Engineering College
, Chennai, India
Search for other works by this author on:
Subramaniam Senthilkumar
;
Subramaniam Senthilkumar
a)
2
National Institute of Technology
, Trichy, India
a)Author to whom correspondence should be addressed: skumar@nitt.edu
Search for other works by this author on:
I. Anand;
I. Anand
2
National Institute of Technology
, Trichy, India
Search for other works by this author on:
Padmanaban Sanjeevikumar
Padmanaban Sanjeevikumar
3
Aalborg University Esbjerg
, Esbjerg, Denmark
Search for other works by this author on:
a)Author to whom correspondence should be addressed: skumar@nitt.edu
J. Renewable Sustainable Energy 10, 053506 (2018)
Article history
Received:
June 27 2018
Accepted:
October 08 2018
Citation
Gurusamy Madhusudanan, Subramaniam Senthilkumar, I. Anand, Padmanaban Sanjeevikumar; A shade dispersion scheme using Latin square arrangement to enhance power production in solar photovoltaic array under partial shading conditions. J. Renewable Sustainable Energy 1 September 2018; 10 (5): 053506. https://doi.org/10.1063/1.5046366
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
Modification of wind turbine wakes by large-scale, convective atmospheric boundary layer structures
Lawrence Cheung, Gopal Yalla, et al.
Simulation and modeling of wind farms in baroclinic atmospheric boundary layers
J. H. Kasper, A. Stieren, et al.
Machine learning for modern power distribution systems: Progress and perspectives
Marija Marković, Matthew Bossart, et al.
Related Content
Power enhancement of partially shaded PV arrays through shade dispersion using magic square configuration
J. Renewable Sustainable Energy (December 2016)
A fast maximum power point tracking method for photovoltaic arrays under partially shaded conditions
J. Renewable Sustainable Energy (March 2016)
Hot-spot reduction and shade loss minimization in crystalline-silicon solar panels
J. Renewable Sustainable Energy (June 2018)
Tracking the global maximum power point of a photovoltaic system under partial shading conditions using a modified firefly algorithm
J. Renewable Sustainable Energy (May 2016)
Optimization and techno-economic assessment of rooftop photovoltaic system
J. Renewable Sustainable Energy (May 2019)