The interpretation of certain phenomena occuring at nominally flat surfaces in stationary or sliding contact is dependent on the assumed distribution of the real area of contact between the surfaces. Since there is little direct evidence on which to base an estimate of this distribution, the approach used is to set up a simple model and compare the deduced theory (e.g., the deduced dependence of the experimental observables on the load) with the experimental evidence. The main conclusions are as follows. (a) The electrical contact resistance depends on the model used to represent the surfaces; the most realistic model is one in which increasing the load increases both the number and size of the contact areas. (b) In general, mechanical wear should also depend on the model. However, in wear experiments showing the simplest behavior, the wear rate is proportional to the load, and these results can be explained by assuming removal of lumps at contact areas formed by plastic deformation; moreover, this particular deduction is independent of the assumed model. This suggests that a basic assumption of previous theories, that increasing the load increases the number of contacts without affecting their average size, is redundant.
Skip Nav Destination
Article navigation
August 1953
Research Article|
August 01 1953
Contact and Rubbing of Flat Surfaces
J. F. Archard
J. F. Archard
Research Laboratory, Associated Electrical Industries Limited, Aldermaston, Berkshire, England
Search for other works by this author on:
J. Appl. Phys. 24, 981–988 (1953)
Article history
Received:
January 08 1953
Citation
J. F. Archard; Contact and Rubbing of Flat Surfaces. J. Appl. Phys. 1 August 1953; 24 (8): 981–988. https://doi.org/10.1063/1.1721448
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
Citing articles via
A step-by-step guide to perform x-ray photoelectron spectroscopy
Grzegorz Greczynski, Lars Hultman
Celebrating notable advances in compound semiconductors: A tribute to Dr. Wladyslaw Walukiewicz
Kirstin Alberi, Junqiao Wu, et al.
GaN-based power devices: Physics, reliability, and perspectives
Matteo Meneghini, Carlo De Santi, et al.