Influence of solution electrical conductivity and ionic composition on the performance of a gas–liquid pulsed spark discharge reactor for water treatment Available to Purchase

The influence of solution electrical conductivity and ion composition on the performance of plasma reactors for water treatment applications is only partially understood. This study uses a point–point discharge over the surface of water in argon gas to determine the influence of solution conductivity, in the range of 0.3–45 mS/cm, on the physiochemical properties of spark discharges and the removal of two organic contaminants: perfluorooctanoic acid (PFOA) and Rhodamine B dye. The influence of various ions was also explored using chlorine and non-chlorine salts to adjust solution conductivity. The removal of PFOA increased with conductivity regardless of the salt type due to the salting out effect which increased PFOA's interfacial concentration. The removal of Rhodamine B dye depended on both salt type and solution electrical conductivity. In the presence of non-chorine salts, UV photolysis was the main mechanism for the dye degradation and its removal rate did not change with conductivity. The dye removal rate was the highest in the presence of chloride-based salts at the highest values of solution conductivities. In the presence of chorine salts, OH radicals are produced by the discharge generated hypochlorous acid, which is mixed into the bulk solution to react with the Rhodamine B dye. The generation rate of hydroxyl radicals appears to decrease with increasing solution conductivity, and these species are not directly involved in the degradation of the two compounds investigated in this study.