A novel matching technique and the field enhancement at the terminals of a bowtie nanoantenna are utilized to develop compact, highly efficient, and flexible thermophotovoltaic (TPV) cells. The bowtie antenna is designed for maximum power transfer to a near infrared band (1 μm to 2.2 μm) of a TPV cell using Indium Gallium Arsenide Antimonide (InGaAsSb). A nano-meter size block of InGaAsSb with a low bandgap energy of 0.52 eV is mounted at the terminals of the antenna. Such a load presents a frequency dependent impedance with a high resistance and capacitance at the desired frequency (180 THz). For maximum power transfer, a high impedance bowtie antenna operating at the anti-resonance mode in conjunction with an inductive stub is realized. The plasmonic behavior of the metal that tends to reduce the antenna size is partially compensated by the extra length needed to achieve the anti-resonance condition. At the desired band, the proposed nanoantenna loaded with InGaAsSb block shows an electric field intensity at the antenna terminals, which is approximately 23.5 times higher than the incident electric field intensity. This feature allows for development of efficient TPV cell and sensitive IR detectors. The infinite array of the bowtie antennas backed by a metallic reflector located at a quarter-wave behind the array is shown to absorb ∼95% of the incident power, which is more than 50% higher than the bulk InGaAsSb TPV cell. A novel configuration of the bowtie nanoantenna array is also presented that allows for collection of DC currents through an almost arbitrary parallel or series configuration of TPV cells without adversely affecting the IR performance of the individual antennas. In this scheme, elements can be arranged to be polarization dependent or independent.
Skip Nav Destination
Article navigation
7 December 2013
Research Article|
December 02 2013
Design optimization of bowtie nanoantenna for high-efficiency thermophotovoltaics
Kamal Sarabandi;
Kamal Sarabandi
Department of Electrical Engineering and Computer Science, University of Michigan
, Ann Arbor, Michigan 48104, USA
Search for other works by this author on:
Sangjo Choi
Sangjo Choi
Department of Electrical Engineering and Computer Science, University of Michigan
, Ann Arbor, Michigan 48104, USA
Search for other works by this author on:
J. Appl. Phys. 114, 214303 (2013)
Article history
Received:
August 08 2013
Accepted:
November 13 2013
Citation
Kamal Sarabandi, Sangjo Choi; Design optimization of bowtie nanoantenna for high-efficiency thermophotovoltaics. J. Appl. Phys. 7 December 2013; 114 (21): 214303. https://doi.org/10.1063/1.4836915
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
A step-by-step guide to perform x-ray photoelectron spectroscopy
Grzegorz Greczynski, Lars Hultman
Efficient methods for extracting superconducting resonator loss in the single-photon regime
Cliff Chen, David Perello, et al.
Tutorial: Simulating modern magnetic material systems in mumax3
Jonas J. Joos, Pedram Bassirian, et al.
Related Content
Surface plasmon resonances in silver Bowtie nanoantennas with varied bow angles
J. Appl. Phys. (December 2010)
The quantum efficiency of InGaAsSb thermophotovoltaic diodes
AIP Conference Proceedings (January 1998)
Minority-carrier transport in InGaAsSb thermophotovoltaic diodes
AIP Conference Proceedings (March 1997)
High Performance InGaAsSb TPV Cells via Multi‐Wafer OMVPE Growth
AIP Conference Proceedings (January 2003)
Improving near-field confinement of a bowtie aperture using surface plasmon polaritons
Appl. Phys. Lett. (June 2011)