This letter provides the theory and mathematical analysis in support of a recently proposed frequency modulated thermal wave imaging for nondestructive subsurface defect detection in solids. The authors illustrate how the technique simultaneously combines the advantages of both conventional pulse based thermography as well as modulated lock-in thermography. A specimen is heated for launching thermal waves into the sample, not at a single frequency (lock-in) or at all frequencies (pulse), but in a desired range of frequencies. While peak power requirement is reduced, phase images obtained retain known advantages. Experimental results from a carbon fiber reinforced plastic sample are presented in support.
REFERENCES
1.
X. P. V.
Maldague
, Theory and Practice of Infrared Thermography for Nondestructive Testing
(Wiley
, Hoboken, NJ, 2001
).2.
J. R.
Lhota
, S. M.
Shepard
, B. A.
Rubadeux
, and T.
Ahmed
, Rev. Prog. Quant. Nondestr. Eval.
20A
, 492
(2000
).3.
X.
Maldague
and S.
Marinetti
, J. Appl. Phys.
79
, 2694
(1996
).4.
D.
Wu
and G.
Busse
, Rev. Gen. Therm.
37
, 693
(1998
).5.
6.
7.
S.
Tuli
and R.
Mulaveesala
, 7th International Conference on Quantitative Infrared Thermography (QIRT) Proceedings
, 2004
(unpublished), Paper H.6.1.8.
S.
Tuli
and R.
Mulaveesala
, Journal of Quantitative Infrared Thermography
2
, 41
(2005
).9.
H. S.
Carlslaw
and J. C.
Jaeger
, Conduction of Heat in Solids
(Oxford University Press
, London, 1959
).10.
© 2006 American Institute of Physics.
2006
American Institute of Physics
You do not currently have access to this content.