Optimum channel thickness in pentacene-based thin-film transistors Available to Purchase

We report on the influence of pentacene channel thickness on the field-effect hole mobility in pentacene-based thin-film transistors (TFTs) that employ the top-contact mode for the source/drain electrodes. Our pentacene channel layers were deposited in the thickness range of 16–90 nm by thermal evaporation on 450 nm thick $Al2O3+x$ dielectric films. The TFTs with increasingly thinner pentacene layers displayed correspondingly higher hole mobility, but an optimum thickness was determined to be about 30 nm because the TFTs with pentacene layers thinner than 30 nm exhibited high leakage current in the off-state bias regime. After a proper chemical treatment was performed onto the $Al2O3+x$ gate dielectric, our optimized TFT with a 30 nm thick pentacene channel exhibited high mobility of ∼0.2 $cm2/V s$ with an on/off current ratio of $105.$