Porous carbons have attracted substantial interest within the realm of energy storage applications. However, their traditional production methods often involve the use of elevated temperatures. In this study, we introduce a simple technique to transform titanium silicon carbide (Ti3SiC2) MAX phases into porous carbons, known as carbide-derived carbons (CDCs), at room temperature by selective etching of the metal atoms (Ti and Si). We investigate how temperature affects the activation of CDCs so formed with potassium hydroxide to enhance their electrochemical properties. Our results unveil the remarkable potential of CDCs activated at 700 °C, demonstrating superior electrochemical performance with a specific capacitance of 198 F g−1 at a scan rate of 20 mV s−1 in a three-electrode configuration. The symmetric supercapacitor based on CDC-700 maintains a respectable specific capacitance of 98 F g−1 at 1 A g−1 and an energy density of 13.7 Wh kg−1 at a power density of 1 kW kg−1. This cost-effective approach offers a pathway for large-scale CDC production, with excellent specific supercapacitor characteristics, promising advancements in energy storage technology.
Skip Nav Destination
Article navigation
8 January 2024
Research Article|
January 11 2024
Carbide-derived carbon by room temperature chemical etching of MAX phase for supercapacitor application
Special Collection:
Carbon-based Materials for Energy Conversion and Storage
Sophy Mariam Varghese
;
Sophy Mariam Varghese
(Data curation, Formal analysis, Investigation, Methodology, Writing – original draft)
1
Centre for Sustainable Energy Technologies (C-SET), CSIR-National Institute of Interdisciplinary Science and Technology (CSIR-NIIST)
, Thiruvananthapuram, Kerala 695019, India
2
Academy of Scientific and Innovative Research (AcSIR)
, Ghaziabad 201002, India
Search for other works by this author on:
S. R. Sarath Kumar
;
S. R. Sarath Kumar
a)
(Conceptualization, Project administration, Resources, Supervision, Validation, Writing – original draft, Writing – review & editing)
3
Department of Nanoscience and Nanotechnology, University of Kerala
, Kariavattom, Thiruvananthapuram 695581, India
a)Authors to whom correspondence should be addressed: sarath.sr.nair@gmail.com; srsarathkumar@keralauniversity.ac.in; rakhisarath@gmail.com; and rakhiraghavanbaby@niist.res.in
Search for other works by this author on:
R. B. Rakhi
R. B. Rakhi
a)
(Conceptualization, Formal analysis, Funding acquisition, Investigation, Methodology, Project administration, Supervision, Validation, Writing – original draft, Writing – review & editing)
1
Centre for Sustainable Energy Technologies (C-SET), CSIR-National Institute of Interdisciplinary Science and Technology (CSIR-NIIST)
, Thiruvananthapuram, Kerala 695019, India
2
Academy of Scientific and Innovative Research (AcSIR)
, Ghaziabad 201002, India
a)Authors to whom correspondence should be addressed: sarath.sr.nair@gmail.com; srsarathkumar@keralauniversity.ac.in; rakhisarath@gmail.com; and rakhiraghavanbaby@niist.res.in
Search for other works by this author on:
a)Authors to whom correspondence should be addressed: sarath.sr.nair@gmail.com; srsarathkumar@keralauniversity.ac.in; rakhisarath@gmail.com; and rakhiraghavanbaby@niist.res.in
Appl. Phys. Lett. 124, 023905 (2024)
Article history
Received:
September 28 2023
Accepted:
December 29 2023
Citation
Sophy Mariam Varghese, S. R. Sarath Kumar, R. B. Rakhi; Carbide-derived carbon by room temperature chemical etching of MAX phase for supercapacitor application. Appl. Phys. Lett. 8 January 2024; 124 (2): 023905. https://doi.org/10.1063/5.0178716
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
392
Views
Citing articles via
Roadmap on photonic metasurfaces
Sebastian A. Schulz, Rupert. F. Oulton, et al.
Feedback cooling of an insulating high-Q diamagnetically levitated plate
S. Tian, K. Jadeja, et al.
Low contact resistivity at the 10−4 Ω cm2 level fabricated directly on n-type AlN
Haicheng Cao, Mingtao Nong, et al.