Skip Nav Destination
Issues
Fracture Behavior Simulation Using Multi‐Scale Analysis Scheme under Various Thermal Conditions
AIP Conf. Proc. 973, 100–105 (2008)
https://doi.org/10.1063/1.2896759
One Dimension Analytical Model of Normal Ballistic Impact on Ceramic/Metal Gradient Armor
AIP Conf. Proc. 973, 106–114 (2008)
https://doi.org/10.1063/1.2896760
Numerical Analysis of Stress Intensity Factors in Three‐Dimensional Functionally Graded Materials
AIP Conf. Proc. 973, 115–120 (2008)
https://doi.org/10.1063/1.2896761
The effect of ceramic/metal gradient armor's components characteristic on its impact‐resistant characteristic
AIP Conf. Proc. 973, 121–128 (2008)
https://doi.org/10.1063/1.2896762
Analytical Model for Thermal Elastoplastic Stresses of Functionally Graded Materials
AIP Conf. Proc. 973, 129–134 (2008)
https://doi.org/10.1063/1.2896763
Fracture Analysis of a Functionally Graded Two‐Layer Strip with a Surface Crack Intersecting the Interface
AIP Conf. Proc. 973, 135–140 (2008)
https://doi.org/10.1063/1.2896764
Effective Thermal Conductivity of Particulate Composites with Different Particle Configurations
AIP Conf. Proc. 973, 141–146 (2008)
https://doi.org/10.1063/1.2896765
Probabilistic Fracture Analysis of Functionally Graded Materials—Part II: Implementation and Numerical Examples
AIP Conf. Proc. 973, 159–164 (2008)
https://doi.org/10.1063/1.2896769
A Hi Fidelity Asymptotic Theory For Local Field Recovery Inside Pre‐stressed Composite Media
AIP Conf. Proc. 973, 165–170 (2008)
https://doi.org/10.1063/1.2896770
Mixed‐Mode Stress Intensity Factors for an Embedded Crack in an Orthotropic FGM Coating
AIP Conf. Proc. 973, 16–21 (2008)
https://doi.org/10.1063/1.2896771
Transition between the models in multiscale simulations: Continua and granular materials
AIP Conf. Proc. 973, 171–177 (2008)
https://doi.org/10.1063/1.2896772
Microstructural Effects in Finite Periodic Multilayers with a Centered Crack
AIP Conf. Proc. 973, 184–189 (2008)
https://doi.org/10.1063/1.2896774
Multiscale Modeling of Dewetting Damage in Highly Filled Particulate Composites
AIP Conf. Proc. 973, 196–202 (2008)
https://doi.org/10.1063/1.2896776
A Locally‐Exact Homogenization Approach for Periodic Heterogeneous Materials
AIP Conf. Proc. 973, 203–208 (2008)
https://doi.org/10.1063/1.2896777
Elasto‐Mammography: Elastic Property Reconstruction in Breast Tissues
AIP Conf. Proc. 973, 209–215 (2008)
https://doi.org/10.1063/1.2896778
Computational Micromechanics of Damage Initiation and Growth in Functionally Graded Composites
AIP Conf. Proc. 973, 216–221 (2008)
https://doi.org/10.1063/1.2896779
Solutions for Optical Fibres as n‐plies FGM Cylinders and Applications
AIP Conf. Proc. 973, 222–229 (2008)
https://doi.org/10.1063/1.2896780
Sintering Stress and Viscosity of Powder Mixtures
AIP Conf. Proc. 973, 22–27 (2008)
https://doi.org/10.1063/1.2896781
Effective Elasticity of Functionally Graded Composites: A Micromechanics Framework with Particle Interactions
AIP Conf. Proc. 973, 230–235 (2008)
https://doi.org/10.1063/1.2896782
Parametric Finite‐Volume Theory for Functionally Graded Materials
AIP Conf. Proc. 973, 236–241 (2008)
https://doi.org/10.1063/1.2896783
FVDAM Analysis of Multi‐Inclusion Unit Cells with Locally Graded Architectures
AIP Conf. Proc. 973, 242–247 (2008)
https://doi.org/10.1063/1.2896784
Crack Initiation Angles in Functionally Graded Materials under Mixed Mode Loading
AIP Conf. Proc. 973, 248–253 (2008)
https://doi.org/10.1063/1.2896785
Investigation of Dynamic Fracture Behavior in Functionally Graded Materials Using the Interaction Integral Method
AIP Conf. Proc. 973, 254–260 (2008)
https://doi.org/10.1063/1.2896786
Scattering of Stress Wave by a Crack in Functionally Graded Orthotropic Materials
AIP Conf. Proc. 973, 261–266 (2008)
https://doi.org/10.1063/1.2896787
Thermoelectromechanical Response of a Parallel Crack in a Functionally Graded Piezoelectric Strip
AIP Conf. Proc. 973, 267–272 (2008)
https://doi.org/10.1063/1.2896788
Fabrication and Mechanical Characterization of Layered Composites with Graded Microstructure
AIP Conf. Proc. 973, 273–278 (2008)
https://doi.org/10.1063/1.2896789
Computer Based Porosity Design by Multi Phase Topology Optimization
AIP Conf. Proc. 973, 285–290 (2008)
https://doi.org/10.1063/1.2896791
Thermoelastic Response of Functionally Graded Barriers Subjected to Shocks
AIP Conf. Proc. 973, 28–32 (2008)
https://doi.org/10.1063/1.2896792
Topology Optimization Applied to the Design of Functionally Graded Piezoelectric Bimorph
AIP Conf. Proc. 973, 291–296 (2008)
https://doi.org/10.1063/1.2896793
Thermal Stress Simulation and Optimum Design of Thermoelectric Unicouples with Graded Interlayers
AIP Conf. Proc. 973, 297–302 (2008)
https://doi.org/10.1063/1.2896794
Topology Optimization with Stress Constraints: Reduction of Stress Concentration in Functionally Graded Structures
AIP Conf. Proc. 973, 303–308 (2008)
https://doi.org/10.1063/1.2896795
Topology Optimization Using Wachspress‐Type Interpolation with Hexagonal Elements
AIP Conf. Proc. 973, 309–314 (2008)
https://doi.org/10.1063/1.2896796
Effective Thermal Conductivity of Graded Nanocomposites with Interfacial Thermal Resistance
AIP Conf. Proc. 973, 321–326 (2008)
https://doi.org/10.1063/1.2896798
Effect of a Diffusion Zone on Fatigue Crack Propagation in Layered FGMs
AIP Conf. Proc. 973, 333–338 (2008)
https://doi.org/10.1063/1.2896800
Effect of Two‐Dimensional Grading on the Thermomechanical Response of the Panel
AIP Conf. Proc. 973, 339–345 (2008)
https://doi.org/10.1063/1.2896801
Stress Recovery and Dynamic Analysis of Functionally Graded Materials
AIP Conf. Proc. 973, 33–38 (2008)
https://doi.org/10.1063/1.2896802
Test Method for the Fatigue Life of Layered TiB/Ti Functionally Graded Beams Subjected to Fully Reversed Bending
AIP Conf. Proc. 973, 391–396 (2008)
https://doi.org/10.1063/1.2896809
Thermoelastic Analysis of a Vibrating TiB/Ti Cantilever Beam Using Differential Thermography
AIP Conf. Proc. 973, 397–402 (2008)
https://doi.org/10.1063/1.2896810
Hp Generalized Finite Elements for Three‐Dimensional Branched Cracks and Polycrystals
AIP Conf. Proc. 973, 39–44 (2008)
https://doi.org/10.1063/1.2896811
Fabrication of Silicon Nitride Ceramics with Pore Gradient Structure
AIP Conf. Proc. 973, 3–8 (2008)
https://doi.org/10.1063/1.2896812
Dynamic Response of Layered TiB/Ti Functionally Graded Material Specimens
AIP Conf. Proc. 973, 403–409 (2008)
https://doi.org/10.1063/1.2896813
Prediction of Dynamic Response for Ti/TiB Functionally Graded Beams
AIP Conf. Proc. 973, 416–422 (2008)
https://doi.org/10.1063/1.2896815
Fatigue Crack Growth Analysis Models for Functionally Graded Materials
AIP Conf. Proc. 973, 423–428 (2008)
https://doi.org/10.1063/1.2896816
A Fracture Mechanics Approach to Thermal Shock Investigation in Alumina‐Based Refractory
AIP Conf. Proc. 973, 443–448 (2008)
https://doi.org/10.1063/1.2896819
New Diamond Deposition Methods and Perspective in High Gravity Process
AIP Conf. Proc. 973, 460–466 (2008)
https://doi.org/10.1063/1.2896823
Mesoporous Titanium Oxide‐Carbon Nanotubes Soot Films Dried under Gravity and Supergravity Conditions
AIP Conf. Proc. 973, 467–475 (2008)
https://doi.org/10.1063/1.2896824
Ultracentrifuge Experiment on an Mg‐Cd Order‐Disorder Alloy
Masao Ono; Yusuke Iguchi; Rabaya Bagum; Kimio Fujii; Satoru Okayasu; Fumitaka Esaka; Tsutomu Mashimo
AIP Conf. Proc. 973, 476–481 (2008)
https://doi.org/10.1063/1.2896825
EFFECTS OF GRAVITY VARIATIONS ON INTERFACIAL FREE ENERGY OF METALS AND TRANSPARENT ORGANIC MATERIALS
AIP Conf. Proc. 973, 488–492 (2008)
https://doi.org/10.1063/1.2896827
On Physical Vapor Deposition of CuPc Organic Thin Films in High Gravity
AIP Conf. Proc. 973, 493–501 (2008)
https://doi.org/10.1063/1.2896828
Formation of Multi‐Layer Structures in Intermetallic Compounds under an Ultra‐High Gravitational Field
AIP Conf. Proc. 973, 502–505 (2008)
https://doi.org/10.1063/1.2896829
Simulations of Fiber Distribution Effects in Fiber‐Reinforced Cement Composites
AIP Conf. Proc. 973, 507–512 (2008)
https://doi.org/10.1063/1.2896830
Fracture Behavior and Properties of Functionally Graded Fiber‐Reinforced Concrete
AIP Conf. Proc. 973, 513–518 (2008)
https://doi.org/10.1063/1.2896831
Manufacturing and Mechanical Testing of a New Functionally Graded Fiber Reinforced Cement Composite
AIP Conf. Proc. 973, 519–524 (2008)
https://doi.org/10.1063/1.2896832
Dynamic Mixed‐Mode Crack Growth in a Particulate Polymer Composite FGM
AIP Conf. Proc. 973, 51–56 (2008)
https://doi.org/10.1063/1.2896833
The FGM Concept in the Development of Fiber Cement Components
AIP Conf. Proc. 973, 525–531 (2008)
https://doi.org/10.1063/1.2896834
Fabrication of Functionally Graded‐cellular Structures of Cement‐based Materials by Co‐extrusion
AIP Conf. Proc. 973, 532–537 (2008)
https://doi.org/10.1063/1.2896835
Effects of Particle Size on the Piezoelectric Properties of 0–3 PZT/Cement Composites
AIP Conf. Proc. 973, 538–543 (2008)
https://doi.org/10.1063/1.2896836
Imaging Based Discrete Element Modeling of Granular Assemblies
AIP Conf. Proc. 973, 544–549 (2008)
https://doi.org/10.1063/1.2896837
On Deformation, Degradation and Solute Diffusion in Solids
AIP Conf. Proc. 973, 550–555 (2008)
https://doi.org/10.1063/1.2896838
Preparation and Fatigue Properties of Functionally Graded Cemented Carbides
AIP Conf. Proc. 973, 556–561 (2008)
https://doi.org/10.1063/1.2896839
Cohesive Modeling of Dynamic Crack Growth in Homogeneous and Functionally Graded Materials
AIP Conf. Proc. 973, 562–567 (2008)
https://doi.org/10.1063/1.2896840
Joining of Ni‐TiC FGM and Ni‐Al Intermetallics by Centrifugal Combustion Synthesis
AIP Conf. Proc. 973, 568–573 (2008)
https://doi.org/10.1063/1.2896841
Corrosion Behavior of and Functionally Graded Materials Fabricated by a Centrifugal Method
AIP Conf. Proc. 973, 574–578 (2008)
https://doi.org/10.1063/1.2896842
Simulating Solid‐Solid Phase Transition in Shape‐Memory Alloy Microstructure by Face‐Offsetting Method
AIP Conf. Proc. 973, 57–62 (2008)
https://doi.org/10.1063/1.2896844
Dense and Homogeneous Compaction of Fine Ceramic and Metallic Powders: High‐Speed Centrifugal Compaction Process
AIP Conf. Proc. 973, 586–591 (2008)
https://doi.org/10.1063/1.2896845
Mechanical Properties of a Graded Alumina‐Zirconia Composite Prepared by Centrifugal Slip Casting
AIP Conf. Proc. 973, 592–597 (2008)
https://doi.org/10.1063/1.2896846
Centrifugal Casting Features/Metallurgical Characterization of Aluminum Alloys
AIP Conf. Proc. 973, 598–603 (2008)
https://doi.org/10.1063/1.2896847
Multi‐objective Optimization of Geometric Dimensions and Material Composition of Functionally Graded Components
AIP Conf. Proc. 973, 610–615 (2008)
https://doi.org/10.1063/1.2896849
Fabrication and Characterization of Functionally Graded Cathodes for Solid Oxide Fuel Cells
AIP Conf. Proc. 973, 616–621 (2008)
https://doi.org/10.1063/1.2896850
Incremental Melting and Solidification Process—Metallurgical Characterization
AIP Conf. Proc. 973, 622–627 (2008)
https://doi.org/10.1063/1.2896851
Effect of synthetic conditions on the thermoelectric properties of polythiophene by electrolytic polymerization
AIP Conf. Proc. 973, 628–633 (2008)
https://doi.org/10.1063/1.2896852
Thermal Analysis of Porous Functionally Graded Thermal Protection Materials
AIP Conf. Proc. 973, 63–68 (2008)
https://doi.org/10.1063/1.2896854
Multiphase Model of Heat and Mass Transport during Laser Alloying of Iron with Electrodeposited Chromium Layer
AIP Conf. Proc. 973, 640–645 (2008)
https://doi.org/10.1063/1.2896855
Boundary‐Integral Algorithm for Drop Squeezing through a Granular Material
AIP Conf. Proc. 973, 652–657 (2008)
https://doi.org/10.1063/1.2896857
Linear Algebra Aspects in the Equilibrium‐Based Implementation of Finite/Boundary Element Methods for FGMs
AIP Conf. Proc. 973, 658–663 (2008)
https://doi.org/10.1063/1.2896858
Thermoelastic Problem in the Functionally Graded Plate with the Slanting Boundary to the Functional Gradation
AIP Conf. Proc. 973, 670–675 (2008)
https://doi.org/10.1063/1.2896861
Three Dimensional Analysis of Periodic Cracking in FGM Coatings under Thermal Stresses
AIP Conf. Proc. 973, 676–681 (2008)
https://doi.org/10.1063/1.2896862
One‐Dimensional Solutions for Transient Thermal Stresses in Functionally Graded Hollow Cylinders and Hollow Spheres
AIP Conf. Proc. 973, 682–687 (2008)
https://doi.org/10.1063/1.2896863
Elastic Instability of Functionally Graded Film–Substrate System due to Residual Thermal Stresses
AIP Conf. Proc. 973, 700–705 (2008)
https://doi.org/10.1063/1.2896867
Investigation of Asphalt Mixture Creep Behavior Using Thin Beam Specimens
AIP Conf. Proc. 973, 718–723 (2008)
https://doi.org/10.1063/1.2896870
Concrete Fracture Prediction Using Virtual Internal Bond Model with Modified Morse Functional Potential
AIP Conf. Proc. 973, 724–729 (2008)
https://doi.org/10.1063/1.2896871
Influence of the Cohesive Zone Model Shape Parameter on Asphalt Concrete Fracture Behavior
AIP Conf. Proc. 973, 730–735 (2008)
https://doi.org/10.1063/1.2896872
Graded Viscoelastic Approach for Modeling Asphalt Concrete Pavements
AIP Conf. Proc. 973, 736–741 (2008)
https://doi.org/10.1063/1.2896873
Multiscale Structured and Functionally Graded Gas Diffusion Electrodes for PEM‐Fuel Cells and Electrodialysis
AIP Conf. Proc. 973, 742–747 (2008)
https://doi.org/10.1063/1.2896874
Material Development and Processing of Multiscale Structured Ceramics for SOFC‐Electrodes
AIP Conf. Proc. 973, 748–753 (2008)
https://doi.org/10.1063/1.2896875
Titanium Carbides Coatings for Wear Resistant Biomedical Devices: Manufacturing and Modeling
AIP Conf. Proc. 973, 760–765 (2008)
https://doi.org/10.1063/1.2896877
Simulation of Crack Growth in Functionally Graded Solid Oxide Fuel Cells under Thermal Loads
AIP Conf. Proc. 973, 76–81 (2008)
https://doi.org/10.1063/1.2896879
The Frictional Contact Problem of Sliding Rigid Parabolic Stamps on Graded Materials
AIP Conf. Proc. 973, 784–789 (2008)
https://doi.org/10.1063/1.2896881
Modeling of Thin Films and Cover Plates Bonded to Graded Substrates
AIP Conf. Proc. 973, 790–795 (2008)
https://doi.org/10.1063/1.2896882
Effect of Ply Orientation and Crack Location on SIFs in Finite Multilayers with Aligned Cracks
AIP Conf. Proc. 973, 796–801 (2008)
https://doi.org/10.1063/1.2896883
Micromechanics‐Based Interfacial Debonding Model of Functionally Graded Materials
AIP Conf. Proc. 973, 802–807 (2008)
https://doi.org/10.1063/1.2896884
Stress Intensity Formulas for Three Dimensional Crack in the Vicinity of an Interface
AIP Conf. Proc. 973, 808–813 (2008)
https://doi.org/10.1063/1.2896885
Contact Mechanics of Graded Materials: Analyses Using Singular Integral Equations
AIP Conf. Proc. 973, 820–825 (2008)
https://doi.org/10.1063/1.2896887
Analysis of Bonded Elastic Wedges with Angular Moduli Variation
AIP Conf. Proc. 973, 826–831 (2008)
https://doi.org/10.1063/1.2896888
On the calibration of elastic‐plastic models for metal‐ceramic functionally graded materials
AIP Conf. Proc. 973, 82–87 (2008)
https://doi.org/10.1063/1.2896889
Design of Layered Metal‐Ceramic FGMs Produced by Spark Plasma Sintering
AIP Conf. Proc. 973, 832–837 (2008)
https://doi.org/10.1063/1.2896890
Thermal Stress Calculation and Fabrication of 6063 Al/60SiC‐35Al‐5Si Graded Materials by Spark Plasma Sintering
AIP Conf. Proc. 973, 844–849 (2008)
https://doi.org/10.1063/1.2896892
Generating Quasi‐Isentropic Loading to Targets via Flier‐Plate Technique
AIP Conf. Proc. 973, 850–855 (2008)
https://doi.org/10.1063/1.2896893
Fabrication of a Three‐Dimensional Terahertz Photonics Crystal Using Monosized Spherical Particles
AIP Conf. Proc. 973, 856–861 (2008)
https://doi.org/10.1063/1.2896894
Research on Mo/Cu Functionally Graded Materials by Resistance Sintering Under Ultra‐High Pressure
AIP Conf. Proc. 973, 862–867 (2008)
https://doi.org/10.1063/1.2896895
Combustion Synthesis of TiC Particle Dispersed Metal Matrix FGM Composites
AIP Conf. Proc. 973, 868–873 (2008)
https://doi.org/10.1063/1.2896896
Research on Recent Processing Technologies for Functionally Graded Materials in China
AIP Conf. Proc. 973, 874–882 (2008)
https://doi.org/10.1063/1.2896897
Fabrication of Artificial Crystal Architectures by Micro‐Manipulation of Spherical Particles
AIP Conf. Proc. 973, 883–888 (2008)
https://doi.org/10.1063/1.2896898
Preparation of Silicon Nitride Multilayer Ceramic Radome Material and Optimal Design of the Wall Structure
AIP Conf. Proc. 973, 889–894 (2008)
https://doi.org/10.1063/1.2896899
Numerical and Analytical Design of Functionally Graded Piezoelectric Transducers
AIP Conf. Proc. 973, 88–93 (2008)
https://doi.org/10.1063/1.2896900
Nanostructured Diclofenac Sodium Releasing Material
AIP Conf. Proc. 973, 901–906 (2008)
https://doi.org/10.1063/1.2896902
Shear Flow on Super‐Hydrophobic Surfaces
AIP Conf. Proc. 973, 912–918 (2008)
https://doi.org/10.1063/1.2896904
On the Interplay between Hydrodynamic and Solvation Interactions
AIP Conf. Proc. 973, 919–924 (2008)
https://doi.org/10.1063/1.2896905
Effect of Ti Additions on Structure of In‐situ Al/Si FGMs by Electromagnetic Separation Method
AIP Conf. Proc. 973, 925–930 (2008)
https://doi.org/10.1063/1.2896906
Microstructural Evolution of Al2O3‐ZrO2 (Y2O3) Composites and its Correlation with Toughness
AIP Conf. Proc. 973, 931–937 (2008)
https://doi.org/10.1063/1.2896907
The Network of Excellence “Knowledge‐based Multicomponent Materials for Durable and Safe Performance”
AIP Conf. Proc. 973, 944–950 (2008)
https://doi.org/10.1063/1.2896909
Corrosion Resistance Evaluation of a Functionally Graded Material Using an Electrochemical Sensor
AIP Conf. Proc. 973, 965–970 (2008)
https://doi.org/10.1063/1.2896913
Electrospun Starch‐Polycaprolactone Nanofiber‐Based Constructs for Tissue Engineering
AIP Conf. Proc. 973, 971–974 (2008)
https://doi.org/10.1063/1.2896914
Diclofenac sodium (DS) loaded bioerodible polymer based constructs
AIP Conf. Proc. 973, 975–979 (2008)
https://doi.org/10.1063/1.2896915
Influence of Property Gradient on the Behavior of Cellular Materials Subjected to Impact Loading
AIP Conf. Proc. 973, 9–15 (2008)
https://doi.org/10.1063/1.2896917
Back Matter for Volume 973
AIP Conf. Proc. 973, backmatter (2008)
https://doi.org/10.1063/v973.backmatter
Front Matter for Volume 973
AIP Conf. Proc. 973, frontmatter (2008)
https://doi.org/10.1063/v973.frontmatter
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Social mediated crisis communication model: A solution for social media crisis?
S. N. A. Hamid, N. Ahmad, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.