Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Issues

Volume 907, Issue 1
7 April 2007
Issue Cover
All Issues
Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel
Frederik Knauf; Gerhard Hirt; Philipp Immich; Kirsten Bobzin
AIP Conf. Proc. 907, 1173–1178 (2007) https://doi.org/10.1063/1.2729673
View articletitled, Influence Of Tool Geometry, Tool Coating And Process Parameters In Thixoextrusion Of Steel
Open the PDF for in another window
Modeling of Uniaxial Compression of Fiber Reinforcements using Finite Strains
S. Comas‐Cardona; P. Le Grognec; C. Binétruy; P. Krawczak
AIP Conf. Proc. 907, 1064–1067 (2007) https://doi.org/10.1063/1.2729655
View articletitled, Modeling of Uniaxial Compression of Fiber Reinforcements using Finite Strains
Open the PDF for in another window
Development of a Simulation Tool for 3D Braiding Architectures
N. Tolosana; S. Lomov; J. Stüve; A. Miravete
AIP Conf. Proc. 907, 1005–1010 (2007) https://doi.org/10.1063/1.2729645
View articletitled, Development of a Simulation Tool for 3D Braiding Architectures
Open the PDF for in another window
Predictive FE Modelling of Prepreg Forming to Determine Optimum Processing Conditions
Hua Lin; Andrew Long; Mike Clifford; Jin Wang; Philip Harrison
AIP Conf. Proc. 907, 1092–1097 (2007) https://doi.org/10.1063/1.2729660
View articletitled, Predictive FE Modelling of Prepreg Forming to Determine Optimum Processing Conditions
Open the PDF for in another window
Computation And Visualization Of Fatigue Behavior of Nodes Under Multi‐Axial Out‐Of‐Phase Loading In An Efficient Way
Shaurav Zobayer Alam
AIP Conf. Proc. 907, 1372–1377 (2007) https://doi.org/10.1063/1.2729706
View articletitled, Computation And Visualization Of Fatigue Behavior of Nodes Under Multi‐Axial Out‐Of‐Phase Loading In An Efficient Way
Open the PDF for in another window
Micro‐Macro approach for mechanical problems involving microstructure
D. Missoum‐Benziane; D. Ryckelynck; F. Chinesta
AIP Conf. Proc. 907, 1342–1347 (2007) https://doi.org/10.1063/1.2729701
View articletitled, Micro‐Macro approach for mechanical problems involving microstructure
Open the PDF for in another window
A natural neighbour method based on Fraeijs de Veubeke variational principle
Serge Cescotto; Xiang Li
AIP Conf. Proc. 907, 1406–1411 (2007) https://doi.org/10.1063/1.2729712
View articletitled, A natural neighbour method based on Fraeijs de Veubeke variational principle
Open the PDF for in another window
The Forming of AISI 409 sheets for fan blade manufacturing
F. D. Foroni; M. A. Menezes; L. A. Moreira Filho
AIP Conf. Proc. 907, 386–389 (2007) https://doi.org/10.1063/1.2729544
View articletitled, The Forming of AISI 409 sheets for fan blade manufacturing
Open the PDF for in another window
Use of TPIF or SPIF for Prototype Productions: an Actual Case
A. Attanasio; E. Ceretti; L. Mazzoni; C. Giardini
AIP Conf. Proc. 907, 163–168 (2007) https://doi.org/10.1063/1.2729505
View articletitled, Use of TPIF or SPIF for Prototype Productions: an Actual Case
Open the PDF for in another window
Behavior Laws And Their Influences On Numerical Prediction
Xavier Lemoine
AIP Conf. Proc. 907, 269–274 (2007) https://doi.org/10.1063/1.2729523
View articletitled, Behavior Laws And Their Influences On Numerical Prediction
Open the PDF for in another window
Experimental and Numerical Investigations to Extend the Process Limits in Self‐Pierce Riveting
J. Eckstein; E. Roos; K. Roll; M. Ruther; M. Seidenfuß
AIP Conf. Proc. 907, 279–286 (2007) https://doi.org/10.1063/1.2729525
View articletitled, Experimental and Numerical Investigations to Extend the Process Limits in Self‐Pierce Riveting
Open the PDF for in another window
A Comparison Between Geometrical and Material Imperfections in Localized Necking Prediction
Holger Aretz
AIP Conf. Proc. 907, 287–292 (2007) https://doi.org/10.1063/1.2729526
View articletitled, A Comparison Between Geometrical and Material Imperfections in Localized Necking Prediction
Open the PDF for in another window
Localisation of damage zones with respect the final part in forging process for different geometric parameters
Ibrahim Khoury; Pascal Lafon; Laurence Giraud‐Moreau; Carl Labergère
AIP Conf. Proc. 907, 439–444 (2007) https://doi.org/10.1063/1.2729552
View articletitled, Localisation of damage zones with respect the final part in forging process for different geometric parameters
Open the PDF for in another window
On The Evaluation Of The Through Thickness Residual Stresses Distribution Of Cold Formed Profiles
Barbara Rossi; Anne‐Marie Habraken; Frederic Pascon
AIP Conf. Proc. 907, 570–577 (2007) https://doi.org/10.1063/1.2729574
View articletitled, On The Evaluation Of The Through Thickness Residual Stresses Distribution Of Cold Formed Profiles
Open the PDF for in another window
Molecular Modeling at Plastic Recycling
Laura Martinelli; Sabino Sinesi; Alessio Baron Toaldo; Maurizio Fermeglia; Paola Posocco; Tomasz Szczurek; Marek Kozlowski
AIP Conf. Proc. 907, 819–823 (2007) https://doi.org/10.1063/1.2729614
View articletitled, Molecular Modeling at Plastic Recycling
Open the PDF for in another window
Manufacturing of Profiles for Lightweight Structures
Sami Chatti; Matthias Kleiner
AIP Conf. Proc. 907, 584–589 (2007) https://doi.org/10.1063/1.2729576
View articletitled, Manufacturing of Profiles for Lightweight Structures
Open the PDF for in another window
Microstructural evolution of PET under stretching and during stretch blow moulding
Martin Picard; Noëlle Billon
AIP Conf. Proc. 907, 801–806 (2007) https://doi.org/10.1063/1.2729611
View articletitled, Microstructural evolution of PET under stretching and during stretch blow moulding
Open the PDF for in another window
Front Matter for Volume 907
AIP Conf. Proc. 907, frontmatter (2007) https://doi.org/10.1063/v907.frontmatter
View articletitled, Front Matter for Volume 907
Open the PDF for in another window
Back Matter for Volume 907
AIP Conf. Proc. 907, backmatter (2007) https://doi.org/10.1063/v907.backmatter
View articletitled, Back Matter for Volume 907
Open the PDF for in another window
High Temperature Straining Behaviour Of High FeSi Electrical Steel By Torsion Tests
P. R. Calvillo; N. Lasa García; Y. Houbaert
AIP Conf. Proc. 907, 451–456 (2007) https://doi.org/10.1063/1.2729554
View articletitled, High Temperature Straining Behaviour Of High FeSi Electrical Steel By Torsion Tests
Open the PDF for in another window
Resulting material and structural properties after hydroforming processes
J. C. Gelin; S. Thibaud; C. Labergere
AIP Conf. Proc. 907, 430–438 (2007) https://doi.org/10.1063/1.2729551
View articletitled, Resulting material and structural properties after hydroforming processes
Open the PDF for in another window
Inverse Method for Identification of Material Parameters Directly from Milling Experiments
A. Maurel; G. Michel; S. Thibaud; M. Fontaine; J. C. Gelin
AIP Conf. Proc. 907, 739–744 (2007) https://doi.org/10.1063/1.2729601
View articletitled, Inverse Method for Identification of Material Parameters Directly from Milling Experiments
Open the PDF for in another window
New Forming Limits For Light Alloys By Means Of Electromagnetic Forming And Numerical Simulation Of The Process
P. Jimbert; I. Ulacia; J. I. Fernandez; I. Eguia; M. Gutiérrez; I. Hurtado
AIP Conf. Proc. 907, 1295–1300 (2007) https://doi.org/10.1063/1.2729693
View articletitled, New Forming Limits For Light Alloys By Means Of Electromagnetic Forming And Numerical Simulation Of The Process
Open the PDF for in another window
Evaluation of Friction Coefficient in Tube Drawing Processes
C. Bruni; A. Forcellese; F. Gabrielli; M. Simoncini; L. Montelatici
AIP Conf. Proc. 907, 552–557 (2007) https://doi.org/10.1063/1.2729571
View articletitled, Evaluation of Friction Coefficient in Tube Drawing Processes
Open the PDF for in another window
FE Simulation of Ultrasonic Back Extrusion
Malgorzata Rosochowska; Andrzej Rosochowski
AIP Conf. Proc. 907, 564–569 (2007) https://doi.org/10.1063/1.2729573
View articletitled, FE Simulation of Ultrasonic Back Extrusion
Open the PDF for in another window
An upper bound solution for the spread extrusion of elliptical sections
K. Abrinia; M. Makaremi
AIP Conf. Proc. 907, 614–619 (2007) https://doi.org/10.1063/1.2729581
View articletitled, An upper bound solution for the spread extrusion of elliptical sections
Open the PDF for in another window
Numerical Method to Analyze Local Stiffness of the Workpiece to avoid Rebound During Electromagnetic Sheet Metal Forming
Désirée Risch; Alexander Brosius; Verena Psyk; Matthias Kleiner
AIP Conf. Proc. 907, 175–180 (2007) https://doi.org/10.1063/1.2729507
View articletitled, Numerical Method to Analyze Local Stiffness of the Workpiece to avoid Rebound During Electromagnetic Sheet Metal Forming
Open the PDF for in another window
Domain Immersion Technique And Free Surface Computations Applied To Extrusion And Mixing Processes
Rudy Valette; Bruno Vergnes; Olivier Basset; Thierry Coupez
AIP Conf. Proc. 907, 1402–1405 (2007) https://doi.org/10.1063/1.2729711
View articletitled, Domain Immersion Technique And Free Surface Computations Applied To Extrusion And Mixing Processes
Open the PDF for in another window
Computer aided testing of steel samples deformation at coexistence liquid and solid phase
M. Hojny; M. Głowacki
AIP Conf. Proc. 907, 1319–1324 (2007) https://doi.org/10.1063/1.2729697
View articletitled, Computer aided testing of steel samples deformation at coexistence liquid and solid phase
Open the PDF for in another window
Modelling and experimental determination of the replication of a cylindrical shape relief
M. Sahli; C. Millot; C. Roques‐Carmes; C. Khan Malek; J. C. Gelin
AIP Conf. Proc. 907, 927–932 (2007) https://doi.org/10.1063/1.2729632
View articletitled, Modelling and experimental determination of the replication of a cylindrical shape relief
Open the PDF for in another window
3‐D Modelling of Electromagnetic, Thermal, Mechanical and Metallurgical Couplings in Metal Forming Processes
Jean‐Loup Chenot; François Bay
AIP Conf. Proc. 907, 1460–1465 (2007) https://doi.org/10.1063/1.2729721
View articletitled, 3‐D Modelling of Electromagnetic, Thermal, Mechanical and Metallurgical Couplings in Metal Forming Processes
Open the PDF for in another window
Picture frame shear tests on woven textile composite reinforcements with controlled pretension
An Willems; Stepan V. Lomov; Ignaas Verpoest; Dirk Vandepitte
AIP Conf. Proc. 907, 999–1004 (2007) https://doi.org/10.1063/1.2729644
View articletitled, Picture frame shear tests on woven textile composite reinforcements with controlled pretension
Open the PDF for in another window
Finite Element Calculation of Local Variation in the Driving Force for Austenite to Martensite Transformation
K. Datta; J. Post; A. Dinsdale; H. J. M. Geijselaers; J. Huétink
AIP Conf. Proc. 907, 229–234 (2007) https://doi.org/10.1063/1.2729516
View articletitled, Finite Element Calculation of Local Variation in the Driving Force for Austenite to Martensite Transformation
Open the PDF for in another window
Anticipation of gears distortions caused by heat treatments
Laurent Vanoverberghe; Lucia Garcia‐Aranda; David Ryckelynck; Yvan Chastel
AIP Conf. Proc. 907, 1221–1226 (2007) https://doi.org/10.1063/1.2729681
View articletitled, Anticipation of gears distortions caused by heat treatments
Open the PDF for in another window
Experimental Study Of Thermal Sliding Contact With Friction : Application To High Speed Machining Of Metallic Materials
E. Guillot; B. Bourouga; B. Garnier; L. Dubar
AIP Conf. Proc. 907, 1263–1268 (2007) https://doi.org/10.1063/1.2729688
View articletitled, Experimental Study Of Thermal Sliding Contact With Friction : Application To High Speed Machining Of Metallic Materials
Open the PDF for in another window
Molecular Dynamics Simulations: which use or the forming processes?
Patrice Chantrenne
AIP Conf. Proc. 907, 1454–1459 (2007) https://doi.org/10.1063/1.2729720
View articletitled, Molecular Dynamics Simulations: which use or the forming processes?
Open the PDF for in another window
Modelling Flow and Heat Transfer in Co‐Rotating Twin‐Screw Extruders
C. Teixeira; R. Faria; J. A. Covas; A. Gaspar‐Cunha
AIP Conf. Proc. 907, 980–985 (2007) https://doi.org/10.1063/1.2729641
View articletitled, Modelling Flow and Heat Transfer in Co‐Rotating Twin‐Screw Extruders
Open the PDF for in another window
Modelling Flow and Heat Transfer in Co‐Rotating Twin‐Screw Extruders
C. Teixeira; R. Faria; J. A. Covas; A. Gaspar‐Cunha
AIP Conf. Proc. 907, 957–962 (2007) https://doi.org/10.1063/1.2729637
View articletitled, Modelling Flow and Heat Transfer in Co‐Rotating Twin‐Screw Extruders
Open the PDF for in another window
A New Modelling of Dynamic Recrystallization — Application to Blanking Process of Thin Sheet in Copper Alloy
Sébastien Thibaud; Abdelhamid Touache; Jérôme Chambert; Philippe Picart
AIP Conf. Proc. 907, 703–708 (2007) https://doi.org/10.1063/1.2729595
View articletitled, A New Modelling of Dynamic Recrystallization — Application to Blanking Process of Thin Sheet in Copper Alloy
Open the PDF for in another window
Lattice Boltzmann Discrete Numerical Simulation of Droplets Coalescence
Bachir Mabrouki; Kamal Mohammedi; Idir Belaidi; Djemai Merrouche
AIP Conf. Proc. 907, 70–75 (2007) https://doi.org/10.1063/1.2729490
View articletitled, Lattice Boltzmann Discrete Numerical Simulation of Droplets Coalescence
Open the PDF for in another window
Laser surface texturing of a heterogeneous material: control of the machining quality
C. Vincent; G. Monteil; T. Barrière; J. C. Gelin
AIP Conf. Proc. 907, 1205–1210 (2007) https://doi.org/10.1063/1.2729678
View articletitled, Laser surface texturing of a heterogeneous material: control of the machining quality
Open the PDF for in another window
Estimation of friction under forging conditions by means of the ring‐on‐disc test
Bernhard Buchner; Andreas Umgeher; Bruno Buchmayr
AIP Conf. Proc. 907, 505–508 (2007) https://doi.org/10.1063/1.2729563
View articletitled, Estimation of friction under forging conditions by means of the ring‐on‐disc test
Open the PDF for in another window
Mechanical Anisotropy of Stainless Steel Sheets Depending on Texture and Grain Misorientation
Yuriy Perlovich; Vladimir Fesenko; Margarita Isaenkova; Vladimir Goltcev
AIP Conf. Proc. 907, 349–353 (2007) https://doi.org/10.1063/1.2729537
View articletitled, Mechanical Anisotropy of Stainless Steel Sheets Depending on Texture and Grain Misorientation
Open the PDF for in another window
Different Approach to the Aluminium Oxide Topography Characterisation
Sanja Mahovic Poljacek; Miroslav Gojo; Pero Raos; Antun Stoic
AIP Conf. Proc. 907, 64–69 (2007) https://doi.org/10.1063/1.2729489
View articletitled, Different Approach to the Aluminium Oxide Topography Characterisation
Open the PDF for in another window
Simulations of one‐layer and multi‐layer composite forming
N. Hamila; F. Hélénon; P. Boisse; T. Mabrouki; E. De Luycker; S. Chatel
AIP Conf. Proc. 907, 1027–1032 (2007) https://doi.org/10.1063/1.2729649
View articletitled, Simulations of one‐layer and multi‐layer composite forming
Open the PDF for in another window
Experimental Investigation of Process Conditions in Injection Stretch Blow Moulding
Y. Salomeia; G. Menary; C. G. Armstrong
AIP Conf. Proc. 907, 896–901 (2007) https://doi.org/10.1063/1.2729627
View articletitled, Experimental Investigation of Process Conditions in Injection Stretch Blow Moulding
Open the PDF for in another window
Influence Of Forming Machine Stiffness On Product Quality In Hot Forging Operations
M. Croin; A. Ghiotti; S. Bruschi
AIP Conf. Proc. 907, 493–498 (2007) https://doi.org/10.1063/1.2729561
View articletitled, Influence Of Forming Machine Stiffness On Product Quality In Hot Forging Operations
Open the PDF for in another window
Optical Measurement Technology For Aluminium Extrusions
Per Thomas Moe; Arnfinn Willa‐Hansen; Sigurd Støren
AIP Conf. Proc. 907, 596–601 (2007) https://doi.org/10.1063/1.2729578
View articletitled, Optical Measurement Technology For Aluminium Extrusions
Open the PDF for in another window
Plastic Behavior and Fracture of Aluminum and Copper in Torsion Tests
José Divo Bressan
AIP Conf. Proc. 907, 521–526 (2007) https://doi.org/10.1063/1.2729566
View articletitled, Plastic Behavior and Fracture of Aluminum and Copper in Torsion Tests
Open the PDF for in another window
Formations of Matter, Light and Sound described with Bernoulli’s principle
L. Strömberg
AIP Conf. Proc. 907, 53–58 (2007) https://doi.org/10.1063/1.2729487
View articletitled, Formations of Matter, Light and Sound described with Bernoulli’s principle
Open the PDF for in another window
Finite Element Analysis of Warpage in Laminated Aluminium Alloy Plates for Machining of Primary Aeronautic Parts
A. C. Reis; M. A. Menezes; L. A. Moreira Filho
AIP Conf. Proc. 907, 1360–1365 (2007) https://doi.org/10.1063/1.2729704
View articletitled, Finite Element Analysis of Warpage in Laminated Aluminium Alloy Plates for Machining of Primary Aeronautic Parts
Open the PDF for in another window
Experimentally Verified Numerical Model of Thixoforming Process
Andrzej Białobrzeski; Monika Kotynia; Jerzy Petera
AIP Conf. Proc. 907, 1130–1135 (2007) https://doi.org/10.1063/1.2729666
View articletitled, Experimentally Verified Numerical Model of Thixoforming Process
Open the PDF for in another window
Improving Quality in Machined Automotive Parts with the Finite Element Method
Unai Segurajauregui; Luc Masset; Pedro José Arrazola
AIP Conf. Proc. 907, 769–774 (2007) https://doi.org/10.1063/1.2729606
View articletitled, Improving Quality in Machined Automotive Parts with the Finite Element Method
Open the PDF for in another window
Anisotropic and Mechanical Behavior of 22MnB5 in Hot Stamping Operations
A. Turetta; S. Bruschi; A. Ghiotti
AIP Conf. Proc. 907, 217–222 (2007) https://doi.org/10.1063/1.2729514
View articletitled, Anisotropic and Mechanical Behavior of 22MnB5 in Hot Stamping Operations
Open the PDF for in another window
Measurement Of Thermal Contact Resistance Between The Mold And The Polymer For The Stretch‐blow Molding Process
M. Bordival; F. M. Schmidt; Y. Le Maoult; E. Coment
AIP Conf. Proc. 907, 1245–1250 (2007) https://doi.org/10.1063/1.2729685
View articletitled, Measurement Of Thermal Contact Resistance Between The Mold And The Polymer For The Stretch‐blow Molding Process
Open the PDF for in another window
Advances in Thermal Spray Deposition of Billets for Particle Reinforced Light Metals
Martin Wenzelburger; Christian Zimmermann; Rainer Gadow
AIP Conf. Proc. 907, 1124–1129 (2007) https://doi.org/10.1063/1.2729665
View articletitled, Advances in Thermal Spray Deposition of Billets for Particle Reinforced Light Metals
Open the PDF for in another window
Flow Kinematics and Particle Orientations during Composite Processing
Kunji Chiba
AIP Conf. Proc. 907, 1331–1335 (2007) https://doi.org/10.1063/1.2729699
View articletitled, Flow Kinematics and Particle Orientations during Composite Processing
Open the PDF for in another window
Numerical Simulations and Optimisation in Forming of Advanced Materials
J. Huétink
AIP Conf. Proc. 907, 1500–1505 (2007) https://doi.org/10.1063/1.2729728
View articletitled, Numerical Simulations and Optimisation in Forming of Advanced Materials
Open the PDF for in another window
Resin Flow Analysis in the Injection Cycle of a Resin Transfer Molded Radome
Hossein Golestanian; Mehrdad Poursina
AIP Conf. Proc. 907, 951–956 (2007) https://doi.org/10.1063/1.2729636
View articletitled, Resin Flow Analysis in the Injection Cycle of a Resin Transfer Molded Radome
Open the PDF for in another window
Corrosion Behaviour of A380 Aluminiun Alloy by Semi‐Solid Rheocasting
A. Forn; E. Rupérez; M. T. Baile; M. Campillo; S. Menargues; I. Espinosa
AIP Conf. Proc. 907, 1161–1166 (2007) https://doi.org/10.1063/1.2729671
View articletitled, Corrosion Behaviour of A380 Aluminiun Alloy by Semi‐Solid Rheocasting
Open the PDF for in another window
On The Hyperbolic Flow Manifested During The Irreversible Deformation Processes In Spatially Extended Crystalline Systems
Juan Daniel Muñoz‐Andrade
AIP Conf. Proc. 907, 1283–1288 (2007) https://doi.org/10.1063/1.2729691
View articletitled, On The Hyperbolic Flow Manifested During The Irreversible Deformation Processes In Spatially Extended Crystalline Systems
Open the PDF for in another window
Accurate hardening modeling as basis for the realistic simulation of sheet forming processes with complex strain‐path changes
Vladislav Levkovitch; Bob Svendsen
AIP Conf. Proc. 907, 358–363 (2007) https://doi.org/10.1063/1.2729539
View articletitled, Accurate hardening modeling as basis for the realistic simulation of sheet forming processes with complex strain‐path changes
Open the PDF for in another window
Morphology and mechanical properties relationships in non‐conventional melt manipulation injection moulding techniques
Anton D. Kouyumdzhiev; Júlio C. Viana
AIP Conf. Proc. 907, 884–889 (2007) https://doi.org/10.1063/1.2729625
View articletitled, Morphology and mechanical properties relationships in non‐conventional melt manipulation injection moulding techniques
Open the PDF for in another window
Determination of Material Properties in the Semi‐Solid State Using Gleeble Simulator
Krzysztof Sołek; Roman Kuziak; Plato Kapranos
AIP Conf. Proc. 907, 1179–1184 (2007) https://doi.org/10.1063/1.2729674
View articletitled, Determination of Material Properties in the Semi‐Solid State Using Gleeble Simulator
Open the PDF for in another window
3D Numerical Modelling Of A Dip‐Coating Process: A Multidomain Approach At The Macroscopic Scale
J. Bikard; E. Relot; T. Budtova
AIP Conf. Proc. 907, 1227–1232 (2007) https://doi.org/10.1063/1.2729682
View articletitled, 3D Numerical Modelling Of A Dip‐Coating Process: A Multidomain Approach At The Macroscopic Scale
Open the PDF for in another window
Modeling of residual stress appearance in the process of on‐line consolidation of thermoplastic composites
François Lemarchand; Pierre Beauchene; Fabrice Boust; Francisco Chinesta
AIP Conf. Proc. 907, 1313–1318 (2007) https://doi.org/10.1063/1.2729696
View articletitled, Modeling of residual stress appearance in the process of on‐line consolidation of thermoplastic composites
Open the PDF for in another window
Modelling of Viscoplastic Behaviour of IN718 Under Hot Forging Conditions
Y. P. Lin; J. Lin; T. A. Dean; P. D. Brown
AIP Conf. Proc. 907, 1199–1204 (2007) https://doi.org/10.1063/1.2729677
View articletitled, Modelling of Viscoplastic Behaviour of IN718 Under Hot Forging Conditions
Open the PDF for in another window
The Results Of The Investigation Of Thermomechanical Processing Of PM Steel
Stefan Szczepanik; Bartosz Wiśniewski; Jerzy Krawiarz
AIP Conf. Proc. 907, 445–450 (2007) https://doi.org/10.1063/1.2729553
View articletitled, The Results Of The Investigation Of Thermomechanical Processing Of PM Steel
Open the PDF for in another window
Modelling of Viscoplastic Behaviour of IN718 Under Hot Forging Conditions
Y. P. Lin; J. Lin; T. A. Dean; P. D. Brown
AIP Conf. Proc. 907, 469–474 (2007) https://doi.org/10.1063/1.2729557
View articletitled, Modelling of Viscoplastic Behaviour of IN718 Under Hot Forging Conditions
Open the PDF for in another window
Analytical and Finite Element Approaches for the Drilling Modelling
Mohamad Jrad; Arnaud Devillez; Daniel Dudzinski
AIP Conf. Proc. 907, 757–762 (2007) https://doi.org/10.1063/1.2729604
View articletitled, Analytical and Finite Element Approaches for the Drilling Modelling
Open the PDF for in another window
Reconstruction of the Deformation Process by Loading Curves for Uniaxial Compression of Zr‐based Alloys at Increased Temperatures
Yuriy Perlovich; Margarita Isaenkova; Olga Krymskaya; Vladimir Filippov; Sergey Kropachev; Mikhail Shtutca
AIP Conf. Proc. 907, 475–480 (2007) https://doi.org/10.1063/1.2729558
View articletitled, Reconstruction of the Deformation Process by Loading Curves for Uniaxial Compression of Zr‐based Alloys at Increased Temperatures
Open the PDF for in another window
Formulation of anisotropic Hill criteria for the description of an aluminium alloy behaviour during the channel die compression test
A. Gavrus; H. Francillette
AIP Conf. Proc. 907, 321–326 (2007) https://doi.org/10.1063/1.2729532
View articletitled, Formulation of anisotropic Hill criteria for the description of an aluminium alloy behaviour during the channel die compression test
Open the PDF for in another window
Adaptiv modeling and simulation of shear banding and high speed cutting
Christian Hortig; Bob Svendsen
AIP Conf. Proc. 907, 721–726 (2007) https://doi.org/10.1063/1.2729598
View articletitled, Adaptiv modeling and simulation of shear banding and high speed cutting
Open the PDF for in another window
Wear Properties of Thixoformed and High Pressure Die Cast Aluminium Alloys for Connecting Rod Applications in Compressors
Yücel Birol; Feriha Birol
AIP Conf. Proc. 907, 1167–1172 (2007) https://doi.org/10.1063/1.2729672
View articletitled, Wear Properties of Thixoformed and High Pressure Die Cast Aluminium Alloys for Connecting Rod Applications in Compressors
Open the PDF for in another window
Thixoforming of Stellite Powder Compacts
S. C. Hogg; H. V. Atkinson; P. Kapranos
AIP Conf. Proc. 907, 1191–1198 (2007) https://doi.org/10.1063/1.2729676
View articletitled, Thixoforming of Stellite Powder Compacts
Open the PDF for in another window
Phenomenological Analysis of the Kinematic Hardening of HSLA and IF Steels Using Reverse Simple Shear Tests
A. Aouafi; S. Bouvier; M. Gaspérini; X. Lemoine; O. Bouaziz
AIP Conf. Proc. 907, 100–105 (2007) https://doi.org/10.1063/1.2729495
View articletitled, Phenomenological Analysis of the Kinematic Hardening of HSLA and IF Steels Using Reverse Simple Shear Tests
Open the PDF for in another window
Finite Element Modelling of the Sawing of DC Cast AA2024 Aluminium Alloy Slabs
J.‐M. Drezet; O. Ludwig; B. Heinrich
AIP Conf. Proc. 907, 1257–1262 (2007) https://doi.org/10.1063/1.2729687
View articletitled, Finite Element Modelling of the Sawing of DC Cast AA2024 Aluminium Alloy Slabs
Open the PDF for in another window
An Experimental Study on the Stability of Superplastic Deformation of AZ31 Mg Alloy
F. K. Abu‐Farha; M. A. Nazzal; M. K. Khraisheh
AIP Conf. Proc. 907, 1289–1294 (2007) https://doi.org/10.1063/1.2729692
View articletitled, An Experimental Study on the Stability of Superplastic Deformation of AZ31 Mg Alloy
Open the PDF for in another window
Influence of Anisotropy Properties in Finite Element Optimization of Blank Shape Using NURBS Surfaces
R. Padmanabhan; M. C. Oliveira; A. J. Baptista; J. L. Alves; L. F. Menezes
AIP Conf. Proc. 907, 205–210 (2007) https://doi.org/10.1063/1.2729512
View articletitled, Influence of Anisotropy Properties in Finite Element Optimization of Blank Shape Using NURBS Surfaces
Open the PDF for in another window
Comparisons of FEM Approaches Modelling the Metal Plastic Behaviour
A. M. Habraken; A. F. Gerday; B. Diouf; L. Duchêne
AIP Conf. Proc. 907, 1478–1483 (2007) https://doi.org/10.1063/1.2729724
View articletitled, Comparisons of FEM Approaches Modelling the Metal Plastic Behaviour
Open the PDF for in another window
The Influence of Strain Rate Variations on the Appearance of Serrated Yielding in 2024‐T3 Al‐Clad Aluminium Alloy
Alan G. Leacock; Robert J. McMurray; D. Brown; Ken Poston
AIP Conf. Proc. 907, 390–395 (2007) https://doi.org/10.1063/1.2729545
View articletitled, The Influence of Strain Rate Variations on the Appearance of Serrated Yielding in 2024‐T3 Al‐Clad Aluminium Alloy
Open the PDF for in another window
A Modified Split Sleeve For The Cold Expansion Process And Application To 7085 Plate
F. Barlat; M. E. Karabin; R. W. Schultz
AIP Conf. Proc. 907, 343–348 (2007) https://doi.org/10.1063/1.2729536
View articletitled, A Modified Split Sleeve For The Cold Expansion Process And Application To 7085 Plate
Open the PDF for in another window
Magnesium Tube Hydroforming
M. Liewald; R. Pop; S. Wagner
AIP Conf. Proc. 907, 417–423 (2007) https://doi.org/10.1063/1.2729549
View articletitled, Magnesium Tube Hydroforming
Open the PDF for in another window
Research on Softening of A95456 Alloy Deformed Under Elevated Temperatures
Pavel A. Petrov; Victor I. Perfilov
AIP Conf. Proc. 907, 27–32 (2007) https://doi.org/10.1063/1.2729483
View articletitled, Research on Softening of A95456 Alloy Deformed Under Elevated Temperatures
Open the PDF for in another window
Liquid State Forging: Novel Potentiality to Produce High Performance Components, Process, Plant and Tooling
M. Rosso; A. Zago; P. Claus; P. Motoiu
AIP Conf. Proc. 907, 509–514 (2007) https://doi.org/10.1063/1.2729564
View articletitled, Liquid State Forging: Novel Potentiality to Produce High Performance Components, Process, Plant and Tooling
Open the PDF for in another window
Experimental Investigation and Numerical Simulation During Backward Extrusion of a Semi‐Solid Al‐Si Hypoeutectic Alloy
Adriana Neag; Véronique Favier; Regis Bigot; Traian Canta; Dan Frunza
AIP Conf. Proc. 907, 620–628 (2007) https://doi.org/10.1063/1.2729582
View articletitled, Experimental Investigation and Numerical Simulation During Backward Extrusion of a Semi‐Solid Al‐Si Hypoeutectic Alloy
Open the PDF for in another window
Solid State Bonding Mechanics In Extrusion And FSW: Experimental Tests And Numerical Analyses
G. Buffa; L. Donati; L. Fratini; L. Tomesani
AIP Conf. Proc. 907, 590–595 (2007) https://doi.org/10.1063/1.2729577
View articletitled, Solid State Bonding Mechanics In Extrusion And FSW: Experimental Tests And Numerical Analyses
Open the PDF for in another window
New Materials Design Through Friction Stir Processing Techniques
G. Buffa; L. Fratini; R. Shivpuri
AIP Conf. Proc. 907, 751–756 (2007) https://doi.org/10.1063/1.2729603
View articletitled, New Materials Design Through Friction Stir Processing Techniques
Open the PDF for in another window
Modelling of Damage Reduction and Microstructure Evolution by Annealing
H. Li; J. Lin; T. A. Dean; S. W. Wen; A. C. Bannister
AIP Conf. Proc. 907, 303–308 (2007) https://doi.org/10.1063/1.2729529
View articletitled, Modelling of Damage Reduction and Microstructure Evolution by Annealing
Open the PDF for in another window
Tool Design and Manufacturing for Bulk Forming of Micro Components
R. S. Eriksen; M. Arentoft; N. A. Paldan
AIP Conf. Proc. 907, 457–462 (2007) https://doi.org/10.1063/1.2729555
View articletitled, Tool Design and Manufacturing for Bulk Forming of Micro Components
Open the PDF for in another window
Strategy of Material Parameters Identification for Non Linear Mechanical Behavior: Sensitivity of FE Computation
S. Bouvier; L. Alves; A. M. Habraken
AIP Conf. Proc. 907, 94–99 (2007) https://doi.org/10.1063/1.2729494
View articletitled, Strategy of Material Parameters Identification for Non Linear Mechanical Behavior: Sensitivity of FE Computation
Open the PDF for in another window
Modeling of the flow stress for AISI H13 Tool Steel during Hard Machining Processes
Domenico Umbrello; Stefania Rizzuti; José C. Outeiro; Rajiv Shivpuri
AIP Conf. Proc. 907, 775–780 (2007) https://doi.org/10.1063/1.2729607
View articletitled, Modeling of the flow stress for AISI H13 Tool Steel during Hard Machining Processes
Open the PDF for in another window
Numerical Prediction of the Dimensioning of Tools for the Extrusion Process of Rubber Profiles
Herbert W. Müllner; André Wieczorek; Josef Eberhardsteiner
AIP Conf. Proc. 907, 986–994 (2007) https://doi.org/10.1063/1.2729642
View articletitled, Numerical Prediction of the Dimensioning of Tools for the Extrusion Process of Rubber Profiles
Open the PDF for in another window
Braiding Simulation and Slip Evaluation for Arbitrary Mandrels
Remko Akkerman; Blasimir Hadir Villa Rodríguez
AIP Conf. Proc. 907, 1074–1079 (2007) https://doi.org/10.1063/1.2729657
View articletitled, Braiding Simulation and Slip Evaluation for Arbitrary Mandrels
Open the PDF for in another window
Tool‐Ply Friction In Composite Forming
R. Akkerman; M. P. Ubbink; M. B. de Rooij; R. H. W. ten Thije
AIP Conf. Proc. 907, 1080–1085 (2007) https://doi.org/10.1063/1.2729658
View articletitled, Tool‐Ply Friction In Composite Forming
Open the PDF for in another window
Theoretical Prediction of the Forming Limit Band
D. Banabic; M. Vos; L. Paraianu; P. Jurco
AIP Conf. Proc. 907, 368–373 (2007) https://doi.org/10.1063/1.2729541
View articletitled, Theoretical Prediction of the Forming Limit Band
Open the PDF for in another window
Approaches To Modelling Of Elastic Modulus Degradation In Sheet Metal Forming
Marko Vrh; Miroslav Halilovič; Boris Štok
AIP Conf. Proc. 907, 239–244 (2007) https://doi.org/10.1063/1.2729518
View articletitled, Approaches To Modelling Of Elastic Modulus Degradation In Sheet Metal Forming
Open the PDF for in another window
Orthotropic Model For Metallic Sheets In Finite Elasto‐Plasticity
Sanda Cleja‐Tigoiu
AIP Conf. Proc. 907, 364–367 (2007) https://doi.org/10.1063/1.2729540
View articletitled, Orthotropic Model For Metallic Sheets In Finite Elasto‐Plasticity
Open the PDF for in another window
Prediction of Limit Strains in Limiting Dome Height Formability Test
Amir A. Zadpoor; Jos Sinke; Rinze Benedictus
AIP Conf. Proc. 907, 258–263 (2007) https://doi.org/10.1063/1.2729521
View articletitled, Prediction of Limit Strains in Limiting Dome Height Formability Test
Open the PDF for in another window
Modelling Material Failure on Large Deformation Processes
J. M. A. César de Sá; A. D. Santos; P. Teixeira; C. Zheng
AIP Conf. Proc. 907, 1472–1477 (2007) https://doi.org/10.1063/1.2729723
View articletitled, Modelling Material Failure on Large Deformation Processes
Open the PDF for in another window
Impact of the Parameter Identification of Plastic Potentials on the Finite Element Simulation of Sheet Metal Forming
M. Rabahallah; S. Bouvier; T. Balan; B. Bacroix; C. Teodosiu
AIP Conf. Proc. 907, 327–330 (2007) https://doi.org/10.1063/1.2729533
View articletitled, Impact of the Parameter Identification of Plastic Potentials on the Finite Element Simulation of Sheet Metal Forming
Open the PDF for in another window
Some considerations on force trends in Incremental Forming of different materials
G. Ambrogio; J. Duflou; L. Filice; R. Aerens
AIP Conf. Proc. 907, 193–198 (2007) https://doi.org/10.1063/1.2729510
View articletitled, Some considerations on force trends in Incremental Forming of different materials
Open the PDF for in another window
Measurement of material properties of 6000 Al‐sheet for car body application using thermal imaging
Ralf Schleich; Alexander Dillenz; Manfred Sindel; Mathias Liewald
AIP Conf. Proc. 907, 181–186 (2007) https://doi.org/10.1063/1.2729508
View articletitled, Measurement of material properties of 6000 Al‐sheet for car body application using thermal imaging
Open the PDF for in another window
Experimental and Numerical Investigations in Single Point Incremental Sheet Forming For Micro parts
S. Dejardin; S. Thibaud; J. C. Gelin
AIP Conf. Proc. 907, 145–150 (2007) https://doi.org/10.1063/1.2729502
View articletitled, Experimental and Numerical Investigations in Single Point Incremental Sheet Forming For Micro parts
Open the PDF for in another window
Numerical Analysis Of The Resistance To Pullout Test Of Clinched Assemblies Of Thin Metal Sheets
Moez Jomaa; René Billardon
AIP Conf. Proc. 907, 169–174 (2007) https://doi.org/10.1063/1.2729506
View articletitled, Numerical Analysis Of The Resistance To Pullout Test Of Clinched Assemblies Of Thin Metal Sheets
Open the PDF for in another window
Two Prediction Methods For Ductile Sheet Metal Failure
Michel Brunet; Patrice Clerc
AIP Conf. Proc. 907, 297–302 (2007) https://doi.org/10.1063/1.2729528
View articletitled, Two Prediction Methods For Ductile Sheet Metal Failure
Open the PDF for in another window
A depth dependent analytical approach to determine material breaking in SPIF
G. Ambrogio; L. Filice; L. Manco; F. Micari
AIP Conf. Proc. 907, 331–336 (2007) https://doi.org/10.1063/1.2729534
View articletitled, A depth dependent analytical approach to determine material breaking in SPIF
Open the PDF for in another window
Finite difference computation of the permeability of textile reinforcements with a fast stokes solver and new validation examples
B. Verleye; R. Croce; M. Griebel; M. Klitz; S. V. Lomov; I. Verpoest; D. Roose
AIP Conf. Proc. 907, 945–950 (2007) https://doi.org/10.1063/1.2729635
View articletitled, Finite difference computation of the permeability of textile reinforcements with a fast stokes solver and new validation examples
Open the PDF for in another window
Numerical Simulation of Injection Stretch Blow Moulding: Comparison with Experimental Free Blow Trials
G. H. Menary; C. W. Tan; M. Picard; N. Billon; C. G. Armstrong; E. M. A. Harkin‐Jones
AIP Conf. Proc. 907, 939–944 (2007) https://doi.org/10.1063/1.2729634
View articletitled, Numerical Simulation of Injection Stretch Blow Moulding: Comparison with Experimental Free Blow Trials
Open the PDF for in another window
Fine Coining of Bulk Metal Formed Parts in Digital Environment
T. Pepelnjak; V. Krušič; K. Kuzman
AIP Conf. Proc. 907, 578–583 (2007) https://doi.org/10.1063/1.2729575
View articletitled, Fine Coining of Bulk Metal Formed Parts in Digital Environment
Open the PDF for in another window
Morphology and Mechanical Properties of Poly(Ethylene Terephthalate) Stretched Above the Glass Transition Temperature
Lyudmil V. Todorov; Júlio C. Viana
AIP Conf. Proc. 907, 795–800 (2007) https://doi.org/10.1063/1.2729610
View articletitled, Morphology and Mechanical Properties of Poly(Ethylene Terephthalate) Stretched Above the Glass Transition Temperature
Open the PDF for in another window
Advanced Prediction of Tool Wear by Taking the Load History into Consideration
K. Ersoy; G. Nuernberg; G. Herrmann; H. Hoffmann
AIP Conf. Proc. 907, 697–702 (2007) https://doi.org/10.1063/1.2729594
View articletitled, Advanced Prediction of Tool Wear by Taking the Load History into Consideration
Open the PDF for in another window
Influence of Mold Surface Treatments on Flow of Polymer in Injection Moulding. Application to Weldlines
M. Chailly; J.‐Y. Charmeau; Y. Bereaux; B. Monasse
AIP Conf. Proc. 907, 915–920 (2007) https://doi.org/10.1063/1.2729630
View articletitled, Influence of Mold Surface Treatments on Flow of Polymer in Injection Moulding. Application to Weldlines
Open the PDF for in another window
Polymer Injection Forming (PIF) Of Thin‐Walled Sheet Metal Parts — Preliminary Experimental Results
Giovanni Lucchetta; Ruggero Baesso
AIP Conf. Proc. 907, 1046–1051 (2007) https://doi.org/10.1063/1.2729652
View articletitled, Polymer Injection Forming (PIF) Of Thin‐Walled Sheet Metal Parts — Preliminary Experimental Results
Open the PDF for in another window
Numerical Simulation of Multi‐Axial Tensile Tests and Free Blowing of a PET Bottle Near Tg by the C‐NEM
B. Cosson; L. Chevalier; J. Yvonnet
AIP Conf. Proc. 907, 1418–1423 (2007) https://doi.org/10.1063/1.2729714
View articletitled, Numerical Simulation of Multi‐Axial Tensile Tests and Free Blowing of a PET Bottle Near Tg by the C‐NEM
Open the PDF for in another window
Assessment Of Mold‐Design Dependent Textures In CIM‐Components By Polarized Light Optical Texture Analysis (PLOTA)
Frank Kern; Johannes Rauch; Rainer Gadow
AIP Conf. Proc. 907, 354–357 (2007) https://doi.org/10.1063/1.2729538
View articletitled, Assessment Of Mold‐Design Dependent Textures In CIM‐Components By Polarized Light Optical Texture Analysis (PLOTA)
Open the PDF for in another window
Optimal Design of Material and Process Parameters in Powder Injection Molding
G. Ayad; T. Barriere; J. C. Gelin; J. Song; B. Liu
AIP Conf. Proc. 907, 1518–1523 (2007) https://doi.org/10.1063/1.2729731
View articletitled, Optimal Design of Material and Process Parameters in Powder Injection Molding
Open the PDF for in another window
Application of Artificial Vision in flow redirection during filling of Liquid Composite Molding processes
N. Montés; F. Sanchez; J. A. García; A. Falcó; J. Tornero; F. Chinesta
AIP Conf. Proc. 907, 902–907 (2007) https://doi.org/10.1063/1.2729628
View articletitled, Application of Artificial Vision in flow redirection during filling of Liquid Composite Molding processes
Open the PDF for in another window
Injection moulding of micro‐parts: applications to micro‐gears
T. Barriere; J. C. Gelin; G. Michel; M. Sahli; C. Quinard
AIP Conf. Proc. 907, 671–676 (2007) https://doi.org/10.1063/1.2729590
View articletitled, Injection moulding of micro‐parts: applications to micro‐gears
Open the PDF for in another window
New Schemes of ECAP Processes for Producing Nanostructured Bulk Metallic Materials
Georgy I. Raab; Alexander V. Botkin; Arsentiy G. Raab; Ruslan Z. Valiev
AIP Conf. Proc. 907, 641–646 (2007) https://doi.org/10.1063/1.2729585
View articletitled, New Schemes of ECAP Processes for Producing Nanostructured Bulk Metallic Materials
Open the PDF for in another window
Mechanical Properties and Fracture Surfaces of Thixoformed HP9/4/30 Steel
M. Z. Omar; H. V. Atkinson; P. Kapranos; A. G. Jaharah
AIP Conf. Proc. 907, 1185–1190 (2007) https://doi.org/10.1063/1.2729675
View articletitled, Mechanical Properties and Fracture Surfaces of Thixoformed HP9/4/30 Steel
Open the PDF for in another window
Influences Of Size Effects On The Rolling Of Micro Strip
Koos van Putten; Reiner Kopp; Gerhard Hirt
AIP Conf. Proc. 907, 629–634 (2007) https://doi.org/10.1063/1.2729583
View articletitled, Influences Of Size Effects On The Rolling Of Micro Strip
Open the PDF for in another window
Proposal And Use Of A Void Model For The Simulation Of Ductile Fracture Behavior In Material Forming
Kazutake Komori
AIP Conf. Proc. 907, 1436–1441 (2007) https://doi.org/10.1063/1.2729717
View articletitled, Proposal And Use Of A Void Model For The Simulation Of Ductile Fracture Behavior In Material Forming
Open the PDF for in another window
Ductile Damage Evolution and Strain Path Dependency
C. C. Tasan; J. M. P. Hoefnagels; R. H. J. Peerlings; M. G. D. Geers; C. H. L. J. ten Horn; H. Vegter
AIP Conf. Proc. 907, 187–192 (2007) https://doi.org/10.1063/1.2729509
View articletitled, Ductile Damage Evolution and Strain Path Dependency
Open the PDF for in another window
Process parameters calibration in 3D tube hydroforming processes
R. Di Lorenzo; G. Ingarao; F. Micari
AIP Conf. Proc. 907, 411–416 (2007) https://doi.org/10.1063/1.2729548
View articletitled, Process parameters calibration in 3D tube hydroforming processes
Open the PDF for in another window
Proposal and Use of a Void Model for the Simulation of Shearing
Kazutake Komori
AIP Conf. Proc. 907, 763–768 (2007) https://doi.org/10.1063/1.2729605
View articletitled, Proposal and Use of a Void Model for the Simulation of Shearing
Open the PDF for in another window
Analysis of metal forming processes by using physical modeling and new plastic similarity condition
Z. Gronostajski; M. Hawryluk
AIP Conf. Proc. 907, 608–613 (2007) https://doi.org/10.1063/1.2729580
View articletitled, Analysis of metal forming processes by using physical modeling and new plastic similarity condition
Open the PDF for in another window
Processing Ultra Fine Grained Net‐Shaped MEMS Parts Using Severe Plastic Deformation
Ruslan Z. Valiev; Yuri Estrin; Georgy I. Raab; Milos Janecek; Aikaterini Zi
AIP Conf. Proc. 907, 635–640 (2007) https://doi.org/10.1063/1.2729584
View articletitled, Processing Ultra Fine Grained Net‐Shaped MEMS Parts Using Severe Plastic Deformation
Open the PDF for in another window
Orthotropic Yield Criteria for modeling the combined effects of anisotropy and strength differential effects in sheet metals
B. Plunkett; O. Cazacu; F. Barlat
AIP Conf. Proc. 907, 396–404 (2007) https://doi.org/10.1063/1.2729546
View articletitled, Orthotropic Yield Criteria for modeling the combined effects of anisotropy and strength differential effects in sheet metals
Open the PDF for in another window
Consistent Parameters for Plastic Anisotropy of Sheet Metal (Part 2‐ Plane‐strain and Compression Tests)
K. Pöhlandt; K. Lange; D. Banabic; J. Schöck
AIP Conf. Proc. 907, 380–385 (2007) https://doi.org/10.1063/1.2729543
View articletitled, Consistent Parameters for Plastic Anisotropy of Sheet Metal (Part 2‐ Plane‐strain and Compression Tests)
Open the PDF for in another window
Measurement of local deformations on thermoformed composite parts under different process conditions
K. Vanclooster; S. V. Lomov; A. Willems; I. Verpoest
AIP Conf. Proc. 907, 1058–1063 (2007) https://doi.org/10.1063/1.2729654
View articletitled, Measurement of local deformations on thermoformed composite parts under different process conditions
Open the PDF for in another window
Effect of the crystallization on the surface temperature of a polymer during injection moulding
Ronan Le Goff; Didier Delaunay
AIP Conf. Proc. 907, 1239–1244 (2007) https://doi.org/10.1063/1.2729684
View articletitled, Effect of the crystallization on the surface temperature of a polymer during injection moulding
Open the PDF for in another window
Dynamic‐Mechanical and Impact Properties of Conductive Polymer Blends Based on Polypropylene
Domenico Acierno; Pietro Russo
AIP Conf. Proc. 907, 841–846 (2007) https://doi.org/10.1063/1.2729618
View articletitled, Dynamic‐Mechanical and Impact Properties of Conductive Polymer Blends Based on Polypropylene
Open the PDF for in another window
Development of Metal/Polymer Mixtures for Micro Powder Injection Moulding
C. Quinard; T. Barriere; J. C. Gelin
AIP Conf. Proc. 907, 933–938 (2007) https://doi.org/10.1063/1.2729633
View articletitled, Development of Metal/Polymer Mixtures for Micro Powder Injection Moulding
Open the PDF for in another window
Sintering Of Polymers: Comprehension, Modeling And Application To Rotomolding Process
Jean‐Damien Muller; Abderrahim Maazouz
AIP Conf. Proc. 907, 824–829 (2007) https://doi.org/10.1063/1.2729615
View articletitled, Sintering Of Polymers: Comprehension, Modeling And Application To Rotomolding Process
Open the PDF for in another window
Transient state impregnation simulation of dual scale porosity fibrous mediums
Bertrand Laine; Pierre Beauchene; Fabrice Boust; Philippe Boisse; Fransisco Chinesta
AIP Conf. Proc. 907, 995–998 (2007) https://doi.org/10.1063/1.2729643
View articletitled, Transient state impregnation simulation of dual scale porosity fibrous mediums
Open the PDF for in another window
Thermomechanical Deformation Analysis of Shape Memory Polymers Using Viscoelasticity
Seok Jin Hong; Woong‐Ryeol Yu; Ji Ho Youk
AIP Conf. Proc. 907, 853–860 (2007) https://doi.org/10.1063/1.2729620
View articletitled, Thermomechanical Deformation Analysis of Shape Memory Polymers Using Viscoelasticity
Open the PDF for in another window
Evaluation of Fracture Initiation in the Mannesmann Piercing Process
S. Fanini; A. Ghiotti; S. Bruschi
AIP Conf. Proc. 907, 709–714 (2007) https://doi.org/10.1063/1.2729596
View articletitled, Evaluation of Fracture Initiation in the Mannesmann Piercing Process
Open the PDF for in another window
Rheological Model and Mechanical Properties of Hard Nanocoatings in Numerical Nanoindentation Test
M. Kopernik; M. Pietrzyk
AIP Conf. Proc. 907, 659–664 (2007) https://doi.org/10.1063/1.2729588
View articletitled, Rheological Model and Mechanical Properties of Hard Nanocoatings in Numerical Nanoindentation Test
Open the PDF for in another window
A finite strain isotropic/kinematic hardening model for springback simulation of sheet metals
Ivaylo N. Vladimirov; Stefanie Reese
AIP Conf. Proc. 907, 139–144 (2007) https://doi.org/10.1063/1.2729501
View articletitled, A finite strain isotropic/kinematic hardening model for springback simulation of sheet metals
Open the PDF for in another window
A New Methodology to Select the Preferred Solutions from the Pareto‐optimal Set: Application to Polymer Extrusion
José C. Ferreira; Carlos M. Fonseca; António Gaspar‐Cunha
AIP Conf. Proc. 907, 861–866 (2007) https://doi.org/10.1063/1.2729621
View articletitled, A New Methodology to Select the Preferred Solutions from the Pareto‐optimal Set: Application to Polymer Extrusion
Open the PDF for in another window
The Compaction Behavior of Fibrous Preform Materials during the VARTM Infusion
Jeffrey M. Lawrence; Pavel Simacek; Pierre Frey; Prabhas Bhat; Timo Gebauer; Suresh G. Advani
AIP Conf. Proc. 907, 1039–1045 (2007) https://doi.org/10.1063/1.2729651
View articletitled, The Compaction Behavior of Fibrous Preform Materials during the VARTM Infusion
Open the PDF for in another window
Description of microstructural intragranular heterogeneities in a Ti‐IF steel using a micromechanical approach
A. Wauthier; R. Brenner; H. Réglé; B. Bacroix
AIP Conf. Proc. 907, 112–117 (2007) https://doi.org/10.1063/1.2729497
View articletitled, Description of microstructural intragranular heterogeneities in a Ti‐IF steel using a micromechanical approach
Open the PDF for in another window
Finite element simulations of thixoforging by using a micro‐macro constitutive equation and comparison with experiments
P. Cézard; V. Favier; R. Bigot
AIP Conf. Proc. 907, 1149–1154 (2007) https://doi.org/10.1063/1.2729669
View articletitled, Finite element simulations of thixoforging by using a micro‐macro constitutive equation and comparison with experiments
Open the PDF for in another window
The Influence of the Welding Line Placement on Springback Effect in Case of a U‐shape Part Made from Tailor Welded Stripes
Albut Aurelian
AIP Conf. Proc. 907, 133–138 (2007) https://doi.org/10.1063/1.2729500
View articletitled, The Influence of the Welding Line Placement on Springback Effect in Case of a U‐shape Part Made from Tailor Welded Stripes
Open the PDF for in another window
Crash Performance Evaluation of Hydro‐formed DP‐steel Tubes Considering Welding Heat Effects, Formability and Spring‐back
Kyung‐Hwan Chung; Junehyung Kim; Wonoh Lee; Ji‐Ho Lim; Chongmin Kim; Michael. L. Wenner; Kwansoo Chung
AIP Conf. Proc. 907, 424–429 (2007) https://doi.org/10.1063/1.2729550
View articletitled, Crash Performance Evaluation of Hydro‐formed DP‐steel Tubes Considering Welding Heat Effects, Formability and Spring‐back
Open the PDF for in another window
Effect Of Die Design On Strength And Deformability Of Hollow Extruded Profiles
L. Donati; L. Tomesani
AIP Conf. Proc. 907, 558–563 (2007) https://doi.org/10.1063/1.2729572
View articletitled, Effect Of Die Design On Strength And Deformability Of Hollow Extruded Profiles
Open the PDF for in another window
Bulk Forming of Industrial Micro Components in Conventional Metals and Bulk Metallic Glasses
M. Arentoft; N. A. Paldan; R. S. Eriksen; T. Gastaldi; J. A. Wert; M. Eldrup
AIP Conf. Proc. 907, 665–670 (2007) https://doi.org/10.1063/1.2729589
View articletitled, Bulk Forming of Industrial Micro Components in Conventional Metals and Bulk Metallic Glasses
Open the PDF for in another window
Deterioration Process of Sintered Material by Impact Repetition
Takahiro Shirakashi
AIP Conf. Proc. 907, 781–788 (2007) https://doi.org/10.1063/1.2729608
View articletitled, Deterioration Process of Sintered Material by Impact Repetition
Open the PDF for in another window
Numerical modelling of concrete flow with rigid fibers
P. Laure; L. Silva; T. Coupez; F. Toussaint
AIP Conf. Proc. 907, 1390–1395 (2007) https://doi.org/10.1063/1.2729709
View articletitled, Numerical modelling of concrete flow with rigid fibers
Open the PDF for in another window
Experimental and Numerical Investigation of Kinematic Hardening Behavior in Sheet Metals
Hang Shawn Cheng; Wonoh Lee; Jian Cao; Mark Seniw; Hui‐ping Wang; Kwansoo Chung
AIP Conf. Proc. 907, 337–342 (2007) https://doi.org/10.1063/1.2729535
View articletitled, Experimental and Numerical Investigation of Kinematic Hardening Behavior in Sheet Metals
Open the PDF for in another window
Sheet Metal Stamping Analysis and Process Design based on the Inverse Approach
Jean‐Louis Batoz; Hakim Naceur; Ying‐Qiao Guo
AIP Conf. Proc. 907, 1448–1453 (2007) https://doi.org/10.1063/1.2729719
View articletitled, Sheet Metal Stamping Analysis and Process Design based on the Inverse Approach
Open the PDF for in another window
Meta‐Model Based Optimisation Algorithms for Robust Optimization of 3D Forging Sequences
Lionel Fourment
AIP Conf. Proc. 907, 21–26 (2007) https://doi.org/10.1063/1.2729482
View articletitled, Meta‐Model Based Optimisation Algorithms for Robust Optimization of 3D Forging Sequences
Open the PDF for in another window
Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes
M. H. A. Bonte; A. H. van den Boogaard; E. Veldman
AIP Conf. Proc. 907, 3–8 (2007) https://doi.org/10.1063/1.2729479
View articletitled, Modelling, screening, and solving of optimisation problems: Application to industrial metal forming processes
Open the PDF for in another window
Numerical simulation of the hydroforming manufacturing process of dissimilar tailor‐welded tubular parts using innovative solid finite elements
R. A. F. Valente; R. M. Natal Jorge; A. P. Roque; M. P. L. Parente; A. A. Fernandes
AIP Conf. Proc. 907, 1354–1359 (2007) https://doi.org/10.1063/1.2729703
View articletitled, Numerical simulation of the hydroforming manufacturing process of dissimilar tailor‐welded tubular parts using innovative solid finite elements
Open the PDF for in another window
A Critical Analysis on the Friction Modeling in Orthogonal Cutting of Steel
L. Filice; F. Micari; S. Rizzuti; D. Umbrello
AIP Conf. Proc. 907, 745–750 (2007) https://doi.org/10.1063/1.2729602
View articletitled, A Critical Analysis on the Friction Modeling in Orthogonal Cutting of Steel
Open the PDF for in another window
Thermally sprayed prepregs for thixoforging of UD fiber reinforced light metal MMCs
Martin Silber; Martin Wenzelburger; Rainer Gadow
AIP Conf. Proc. 907, 1118–1123 (2007) https://doi.org/10.1063/1.2729664
View articletitled, Thermally sprayed prepregs for thixoforging of UD fiber reinforced light metal MMCs
Open the PDF for in another window
Meshless methods with application to Resin Transfer Molding simulation
J. A. García; Ll. Gascón; E. Cueto; F. Sánchez; F. Chinesta
AIP Conf. Proc. 907, 1378–1383 (2007) https://doi.org/10.1063/1.2729707
View articletitled, Meshless methods with application to Resin Transfer Molding simulation
Open the PDF for in another window
Forming Limit Predictions for Single‐Point Incremental Sheet Metal Forming
A. Van Bael; P. Eyckens; S. He; C. Bouffioux; C. Henrard; A. M. Habraken; J. Duflou; P. Van Houtte
AIP Conf. Proc. 907, 309–314 (2007) https://doi.org/10.1063/1.2729530
View articletitled, Forming Limit Predictions for Single‐Point Incremental Sheet Metal Forming
Open the PDF for in another window
Possibilities of Particle Finite Element Methods in Industrial Forming Processes
J. Oliver; J. C. Cante; R. Weyler; J. Hernandez
AIP Conf. Proc. 907, 1484–1489 (2007) https://doi.org/10.1063/1.2729725
View articletitled, Possibilities of Particle Finite Element Methods in Industrial Forming Processes
Open the PDF for in another window
Numerical Simulations and Experimental Researches for Determining the Forces of Incremental Sheet Forming Process
Valentin Oleksik; Octavian Bologa; Gabriel Racz; Radu Breaz
AIP Conf. Proc. 907, 245–251 (2007) https://doi.org/10.1063/1.2729519
View articletitled, Numerical Simulations and Experimental Researches for Determining the Forces of Incremental Sheet Forming Process
Open the PDF for in another window
The Extended Finite Element Method for Time Dependent Problems with Evolving Discontinuities
Anthony Gravouil
AIP Conf. Proc. 907, 1442–1447 (2007) https://doi.org/10.1063/1.2729718
View articletitled, The Extended Finite Element Method for Time Dependent Problems with Evolving Discontinuities
Open the PDF for in another window
A New Definition of Shape Complexity Factor in Forging
R. Hosseini Ara; M. Poursina; H. Golastanian
AIP Conf. Proc. 907, 487–492 (2007) https://doi.org/10.1063/1.2729560
View articletitled, A New Definition of Shape Complexity Factor in Forging
Open the PDF for in another window
Tube Bulge Process : Theoretical Analysis And Finite Element Simulations
Raphaël Velasco; Nathalie Boudeau
AIP Conf. Proc. 907, 405–410 (2007) https://doi.org/10.1063/1.2729547
View articletitled, Tube Bulge Process : Theoretical Analysis And Finite Element Simulations
Open the PDF for in another window
FEM Simulation of Incremental Shear
Andrzej Rosochowski; Lech Olejnik
AIP Conf. Proc. 907, 653–658 (2007) https://doi.org/10.1063/1.2729587
View articletitled, FEM Simulation of Incremental Shear
Open the PDF for in another window
Adaptive remeshing method in 2D based on refinement and coarsening techniques
L. Giraud‐Moreau; H. Borouchaki; A. Cherouat
AIP Conf. Proc. 907, 515–520 (2007) https://doi.org/10.1063/1.2729565
View articletitled, Adaptive remeshing method in 2D based on refinement and coarsening techniques
Open the PDF for in another window
The Modulus of Rupture from a Mathematical Point of View
P. Quintela; M. T. Sánchez
AIP Conf. Proc. 907, 1466–1471 (2007) https://doi.org/10.1063/1.2729722
View articletitled, The Modulus of Rupture from a Mathematical Point of View
Open the PDF for in another window
A Multiscale Model Based On Intragranular Microstructure — Prediction Of Dislocation Patterns At The Microscopic Scale
Gérald Franz; Farid Abed‐Meraim; Tarak Ben Zineb; Xavier Lemoine; Marcel Berveiller
AIP Conf. Proc. 907, 47–52 (2007) https://doi.org/10.1063/1.2729486
View articletitled, A Multiscale Model Based On Intragranular Microstructure — Prediction Of Dislocation Patterns At The Microscopic Scale
Open the PDF for in another window
An Advanced Numerical Differentiation Scheme for Plastic Strain‐Rate Computation
Holger Aretz
AIP Conf. Proc. 907, 151–156 (2007) https://doi.org/10.1063/1.2729503
View articletitled, An Advanced Numerical Differentiation Scheme for Plastic Strain‐Rate Computation
Open the PDF for in another window
Moving least squares for consistent field transfer strategy in non linear inelastic analysis
D. Brancherie; P. Villon
AIP Conf. Proc. 907, 1424–1429 (2007) https://doi.org/10.1063/1.2729715
View articletitled, Moving least squares for consistent field transfer strategy in non linear inelastic analysis
Open the PDF for in another window
Hermite MLS approximation for discretizing fourth order partial differential equations encountered in beam and plate models
P. Joyot; F. Chinesta; P. Villon; B. Khoshnoudirad
AIP Conf. Proc. 907, 1384–1389 (2007) https://doi.org/10.1063/1.2729708
View articletitled, Hermite MLS approximation for discretizing fourth order partial differential equations encountered in beam and plate models
Open the PDF for in another window
Simulation of Ball End Milling Process with Cutter Axis Inclination
Takashi Matsumura; Takahiro Shirakashi; Eiji Usui
AIP Conf. Proc. 907, 727–732 (2007) https://doi.org/10.1063/1.2729599
View articletitled, Simulation of Ball End Milling Process with Cutter Axis Inclination
Open the PDF for in another window
Thermal and thermo‐mechanical simulation of laser assisted machining
G. Germain; P. Dal Santo; J. L. Lebrun; D. Bellett; P. Robert
AIP Conf. Proc. 907, 1251–1256 (2007) https://doi.org/10.1063/1.2729686
View articletitled, Thermal and thermo‐mechanical simulation of laser assisted machining
Open the PDF for in another window
Temperature Evolution During Plane Strain Compression Of Tertiary Oxide Scale On Steel
L. Suarez; X. Vanden Eynde; M. Lamberigts; Y. Houbaert
AIP Conf. Proc. 907, 1233–1238 (2007) https://doi.org/10.1063/1.2729683
View articletitled, Temperature Evolution During Plane Strain Compression Of Tertiary Oxide Scale On Steel
Open the PDF for in another window
Reactive Functionalized Multilayer Polymers in Coextrusion Process
Khalid Lamnawar; Abderrahim Maazouz
AIP Conf. Proc. 907, 908–914 (2007) https://doi.org/10.1063/1.2729629
View articletitled, Reactive Functionalized Multilayer Polymers in Coextrusion Process
Open the PDF for in another window
Friction and wear in hot forging of steels
E. Daouben; L. Dubar; M. Dubar; R. Deltombe; A. Dubois; N. Truong‐Dinh; L. Lazzarotto
AIP Conf. Proc. 907, 527–534 (2007) https://doi.org/10.1063/1.2729567
View articletitled, Friction and wear in hot forging of steels
Open the PDF for in another window
A Practical Approach To Preform Design For Different Materials
Otto Harrer; Christof Sommitsch; Guntram Rüf; Bruno Buchmayr
AIP Conf. Proc. 907, 15–20 (2007) https://doi.org/10.1063/1.2729481
View articletitled, A Practical Approach To Preform Design For Different Materials
Open the PDF for in another window
Research Concerning The Mechanical And Structural Properties Of Warm Rolled Construction Carbon Steels
C. Medrea; G. Negrea; S. Domsa
AIP Conf. Proc. 907, 118–126 (2007) https://doi.org/10.1063/1.2729498
View articletitled, Research Concerning The Mechanical And Structural Properties Of Warm Rolled Construction Carbon Steels
Open the PDF for in another window
Forming of Magnesium — Crystal Plasticity and Plastic Potentials
Dirk Steglich; Stéphane Graff; Wolfgang Brocks
AIP Conf. Proc. 907, 1277–1282 (2007) https://doi.org/10.1063/1.2729690