Skip Nav Destination
Issues
SM and ND Substitutions in YBCO Films Produced through Metal Organic Deposition
AIP Conf. Proc. 824, 771–776 (2006)
https://doi.org/10.1063/1.2192422
The Force Relaxation in Levitating High Tc Superconductor
AIP Conf. Proc. 824, 820–827 (2006)
https://doi.org/10.1063/1.2192429
Spin Correlated Scattering and Metal‐Semiconductor Transition in CMR Manganites
AIP Conf. Proc. 824, 51–58 (2006)
https://doi.org/10.1063/1.2192333
New 5 K Magnetic Rare Earth Regenerator Intermetallic Compounds
AIP Conf. Proc. 824, 19–26 (2006)
https://doi.org/10.1063/1.2192329
AC Loss (50–200 Hz) in YBCO Conductors with Filaments and Cu Stabilization
AIP Conf. Proc. 824, 885–892 (2006)
https://doi.org/10.1063/1.2192437
Tensile Properties, Ferrite Contents, and Specimen Heating of Stainless Steels in Cryogenic Gas Tests
AIP Conf. Proc. 824, 122–129 (2006)
https://doi.org/10.1063/1.2192342
Comparison of Different Routes for Improving Vortex Pinning in YBa2Cu3O7 Thin Films and Coated Conductors
AIP Conf. Proc. 824, 763–770 (2006)
https://doi.org/10.1063/1.2192421
Effect of Martensitic Transformation on Serration of 304L Steel at Cryogenic Temperatures
AIP Conf. Proc. 824, 83–90 (2006)
https://doi.org/10.1063/1.2192337
MgB2 Thin Films for Radiation Detectors Operating at Microwave Frequencies
G. Ghigo; D. Botta; R. Gerbaldo; L. Gozzelino; F. Laviano; B. Minetti; D. Andreone; E. Monticone; E. Mezzetti
AIP Conf. Proc. 824, 463–470 (2006)
https://doi.org/10.1063/1.2192383
The Superconducting Properties of High Density Bulk MgB2 Obtained by Reactive Liquid Mg Infiltration
AIP Conf. Proc. 824, 813–819 (2006)
https://doi.org/10.1063/1.2192428
Critical Current Anisotropy, Pinning Properties and Relaxation Rate of “Ex‐situ” MgB2/Fe Tapes
AIP Conf. Proc. 824, 654–661 (2006)
https://doi.org/10.1063/1.2192407
Aluminum‐Stabilized Magnesium Diboride Superconductors
AIP Conf. Proc. 824, 639–645 (2006)
https://doi.org/10.1063/1.2192405
Nanostructuring of High‐TC Superconductors into Micro‐Sized Zones
E. Mezzetti; D. Botta; A. Chiodoni; R. Gerbaldo; G. Ghigo; L. Gozzelino; F. Laviano; B. Minetti; A. Rovelli; A. Amato; R. Cherubini
AIP Conf. Proc. 824, 786–793 (2006)
https://doi.org/10.1063/1.2192424
Long‐Length YBCO Coated Stainless Steel Tapes with High Critical Currents
AIP Conf. Proc. 824, 713–719 (2006)
https://doi.org/10.1063/1.2192414
Nb3Sn Conductor Development for Fusion and Particle Accelerator Applications
AIP Conf. Proc. 824, 544–549 (2006)
https://doi.org/10.1063/1.2192393
Fabrication and Characterization of YBCO Coated Conductors by Inclined Substrate Deposition
AIP Conf. Proc. 824, 743–750 (2006)
https://doi.org/10.1063/1.2192418
Activity in SRL Nagoya Coated Conductor Center for YBCO Coated Conductor by IBAD+ PLD Method ‐Long, high Ic conductor and a new bamboo‐like nanostructure for efficient pinning
Yutaka Yamada; Akira Ibi; Hiroyuki Fukushima; Reiji Kuriki; Kazuhiro Takahashi; Hiroyoshi Kobayashi; Satoru Ishida; Masaya Konishi; Seiki Miyata; Tomonori Watanabe; Takeharu Kato; Tsukasa Hirayama; Yuh Shiohara
AIP Conf. Proc. 824, 720–728 (2006)
https://doi.org/10.1063/1.2192415
Improving YBCO Coated Conductors for Applications
AIP Conf. Proc. 824, 425–432 (2006)
https://doi.org/10.1063/1.2192378
Waveform of Loss Voltage in Ag‐Sheathed Bi2223 Superconducting Tape Carrying AC Transport Current
AIP Conf. Proc. 824, 869–876 (2006)
https://doi.org/10.1063/1.2192435
Ic Enhancement Effect in Nb3Sn Coils Fabricated by the React‐and‐Wind Method
AIP Conf. Proc. 824, 536–543 (2006)
https://doi.org/10.1063/1.2192392
Condensation Energy Density of Superconducting Bi‐2223 Single Crystals
E. S. Otabe; I. Kohno; M. Kiuchi; T. Matsushita; T. Nomura; T. Motohashi; M. Karppinen; H. Yamauchi; S. Okayasu
AIP Conf. Proc. 824, 805–812 (2006)
https://doi.org/10.1063/1.2192427
Various Methods of Reducing AC Losses and Improving Stability of Internal‐Tin Nb3Sn Superconductors
AIP Conf. Proc. 824, 843–850 (2006)
https://doi.org/10.1063/1.2192432
Superconducting Properties of In‐situ PIT MgB2 Tapes with Different Ceramic Powder
AIP Conf. Proc. 824, 631–638 (2006)
https://doi.org/10.1063/1.2192404
Solenoid and Racetrack Coils Wound from MgB2 Strand
M. D. Sumption; M. Bhatia; F. Buta; S. Bohnenstiehl; M. Tomsic; M. Rindfleisch; J. Yue; J. Phillips; S. Kawabata; E. W. Collings
AIP Conf. Proc. 824, 455–462 (2006)
https://doi.org/10.1063/1.2192382
Effect of an Aging Heat Treatment on the 4 K Fracture and Fatigue Properties of 316LN and Haynes 242
AIP Conf. Proc. 824, 107–114 (2006)
https://doi.org/10.1063/1.2192340
The Integration of YBACU3O6+X Coated Conductors into Magnets and Rotating Machinery
AIP Conf. Proc. 824, 433–439 (2006)
https://doi.org/10.1063/1.2192379
High Temperature Superconductors for High Field Superconducting Magnets
AIP Conf. Proc. 824, 416–424 (2006)
https://doi.org/10.1063/1.2192377
SiGe Technology for Military and Deep Space Cryogenic Power Electronics
AIP Conf. Proc. 824, 359–366 (2006)
https://doi.org/10.1063/1.2192372
Thermal Property Measurements on Bulk Bi‐2212 MCP Fault Current Limiter Materials
AIP Conf. Proc. 824, 794–798 (2006)
https://doi.org/10.1063/1.2192425
Thermal Conductivity and Specific Heat Measurements of Candidate Structural Materials for the JWST Optical Bench
AIP Conf. Proc. 824, 233–240 (2006)
https://doi.org/10.1063/1.2192356
SuperPower’s Second Generation HTS Conductor Design for Stability and Low AC Losses
AIP Conf. Proc. 824, 859–868 (2006)
https://doi.org/10.1063/1.2192434
14 MeV Neutron Irradiation Effect on Superconducting Magnet Materials for Fusion Device
A. Nishimura; Y. Hishinuma; K. Seo; T. Tanaka; T. Muroga; S. Nishijima; K. Katagiri; T. Takeuchi; Y. Shindo; K. Ochiai; T. Nishitani; K. Okuno
AIP Conf. Proc. 824, 208–215 (2006)
https://doi.org/10.1063/1.2192353
Introduction of Artificial Pinning Center into PLD‐YBCO Coated Conductor on IBAD and Self‐Epitaxial CeO2 Buffered Metal Substrate
H. Kobayashi; Y. Yamada; S. Ishida; K. Takahashi; M. Konishi; A. Ibi; S. Miyata; T. Kato; T. Hirayama; Y. Shiohara
AIP Conf. Proc. 824, 729–734 (2006)
https://doi.org/10.1063/1.2192416
The Effect of Alumina Additions on the Processing of Bi‐2212 Conductors
AIP Conf. Proc. 824, 683–687 (2006)
https://doi.org/10.1063/1.2192410
A Low Hysteresis NiTiFe Shape Memory Alloy Based Thermal Conduction Switch
AIP Conf. Proc. 824, 3–10 (2006)
https://doi.org/10.1063/1.2192327
Degradation Behavior of the HTS Bulk Magnet in Cryocooler System with Cyclic Temperature Variation
AIP Conf. Proc. 824, 799–804 (2006)
https://doi.org/10.1063/1.2192426
Effect of Test Frequency on Fatigue Crack Growth Rates of Ti‐6Al‐4V ELI Alloy at Cryogenic Temperature
AIP Conf. Proc. 824, 153–160 (2006)
https://doi.org/10.1063/1.2192346
Result of International Round Robin Test on Young’s Modulus Measurement of 304L and 316L Steels at Cryogenic Temperatures
K. Shibata; T. Ogata; A. Nyilas; R. P. Walsh; M. F. Millet; Y. Shindo; H. Fujii; K. Ishio; H. Nakajima; H. Mitterbacher; V. J. Toplosky; S. Ohmiya; K. Takano; P. Gigante
AIP Conf. Proc. 824, 91–98 (2006)
https://doi.org/10.1063/1.2192338
Novel SiGe Semiconductor Devices for Cryogenic Power Electronics
R. R. Ward; W. J. Dawson; L. Zhu; R. K. Kirschman; G. Niu; R. M. Nelms; O. Mueller; M. J. Hennessy; E. K. Mueller
AIP Conf. Proc. 824, 351–358 (2006)
https://doi.org/10.1063/1.2192371
Problems Which Must Be Solved in Using Superconducting Coated Conductors in Aircraft Generators
AIP Conf. Proc. 824, 440–447 (2006)
https://doi.org/10.1063/1.2192380
Evaluating the Resistance to Microcrack Formation of Composites at Cryogenic Temperatures
AIP Conf. Proc. 824, 257–263 (2006)
https://doi.org/10.1063/1.2192359
Characterization of Mode II Fracture Properties of Fiber Reinforced Insulation Systems for Superconducting Cables
AIP Conf. Proc. 824, 283–290 (2006)
https://doi.org/10.1063/1.2192362
Mechanical Properties of Organic Materials Used in Superconducting Magnets Irradiated by Gamma Rays at Liquid Nitrogen Temperature
T. Nakamoto; A. Idesaki; N. Morishita; H. Itoh; T. Kamiya; N. Kimura; Y. Makida; T. Ogitsu; H. Ohhata; A. Yamamoto
AIP Conf. Proc. 824, 225–232 (2006)
https://doi.org/10.1063/1.2192355
Static and Dynamic Performance of Newly Developed ITER Relevant Insulation Systems after Neutron Irradiation
AIP Conf. Proc. 824, 342–348 (2006)
https://doi.org/10.1063/1.2192370
Evolved Gases from Organic Materials Used in the Superconducting Magnets Irradiated by Gamma Rays at Liquid Nitrogen Temperature
A. Idesaki; N. Morishita; H. Itoh; T. Kamiya; T. Nakamoto; N. Kimura; Y. Makida; T. Ogitsu; H. Ohhata; A. Yamamoto
AIP Conf. Proc. 824, 330–334 (2006)
https://doi.org/10.1063/1.2192368
Optimization of Peltier Current Leads for 5T Cryogen‐Free Superconducting Magnets
A. Sasaki; T. Kasukabe; M. Oue; M. Hamabe; K. Nakamura; S. Yamaguchi; A. Ninomiya; H. Okumura; K. Kawamura; I. Aoki
AIP Conf. Proc. 824, 384–391 (2006)
https://doi.org/10.1063/1.2192375
Irradiation Effect of 14 MeV Neutron on Interlaminar Shear Strength of Glass Fiber Reinforced Plastics
A. Nishimura; Y. Hishinuma; K. Seo; T. Tanaka; T. Muroga; S. Nishijima; K. Katagiri; T. Takeuchi; Y. Shindo; K. Ochiai; T. Nishitani; K. Okuno
AIP Conf. Proc. 824, 241–248 (2006)
https://doi.org/10.1063/1.2192357
77 K Fatigue Crack Growth Rate of Modified CF8M Stainless Steel Castings
AIP Conf. Proc. 824, 138–144 (2006)
https://doi.org/10.1063/1.2192344
Development of 2T‐Class MgB2 Solenoid Coil
AIP Conf. Proc. 824, 662–669 (2006)
https://doi.org/10.1063/1.2192408
High‐Cycle Fatigue Properties at Cryogenic Temperatures in INCONEL 718
AIP Conf. Proc. 824, 184–191 (2006)
https://doi.org/10.1063/1.2192350
Electrodeposited Biaxially Textured CeO2 and CeO2:Sm Buffer Layer for YBCO Superconductor Oxide Films
AIP Conf. Proc. 824, 751–757 (2006)
https://doi.org/10.1063/1.2192419
Dual Ion Assist Beam Deposition of Magnesium Oxide for Coated Conductors
J. R. Groves; P. N. Arendt; T. G. Holesinger; R. H. Hammond; S. R. Foltyn; R. F. DePaula; L. Stan; I. O. Usov
AIP Conf. Proc. 824, 735–742 (2006)
https://doi.org/10.1063/1.2192417
Mechanical Properties of Low Density Alloys at Cryogenic Temperatures
AIP Conf. Proc. 824, 69–76 (2006)
https://doi.org/10.1063/1.2192335
Oxidized Hastelloy Cloth Insulation for a Wind‐and‐React Processed Ag/Bi2Sr2CaCu2O8 Superconducting Magnet
AIP Conf. Proc. 824, 704–709 (2006)
https://doi.org/10.1063/1.2192413
Studies of Precursor Composition Effect on Jc in Bi‐2212/Ag Wires and Tapes
AIP Conf. Proc. 824, 673–682 (2006)
https://doi.org/10.1063/1.2192409
Microstructure and Cryogenic Mechanical Properties of a 316L Plate and Its Weldments
AIP Conf. Proc. 824, 99–106 (2006)
https://doi.org/10.1063/1.2192339
Tensile Property of Al‐Mg‐Sc‐Zr Alloy at Cryogenic Temperature
AIP Conf. Proc. 824, 169–175 (2006)
https://doi.org/10.1063/1.2192348
Structure and High‐Field Performance of (Nb,Ta)3Sn Wires Prepared from Sn‐Ta Sheets with Ti Addition
AIP Conf. Proc. 824, 481–488 (2006)
https://doi.org/10.1063/1.2192385
Properties of Cyanate‐Ester‐Based Composite Insulation for Magnet Applications
AIP Conf. Proc. 824, 275–282 (2006)
https://doi.org/10.1063/1.2192361
Gas Evolution Measurements on Reactor Irradiated Advanced Fusion Magnet Insulation Systems
AIP Conf. Proc. 824, 335–341 (2006)
https://doi.org/10.1063/1.2192369
Strain and Field Scaling Laws for Internal Sn and Bronze Route Nb3Sn Wires up to 21T
AIP Conf. Proc. 824, 528–535 (2006)
https://doi.org/10.1063/1.2192391
Trapezoidal Wire for the Hollow Superconducting Cable Designed for Fast Cycling Synchrotron Magnets
L. V. Potanina; G. P. Vedernikov; A. K. Shikov; I. N. Gubkin; N. I. Salunin; V. Yu. Korpusov; E. I. Plashkin; H. Khodzhibagiyan; A. Kovalenko; S. I. Novikov; M. S. Novikov
AIP Conf. Proc. 824, 448–454 (2006)
https://doi.org/10.1063/1.2192381
Interfacial Coatings for Inorganic Composite Insulation Systems
AIP Conf. Proc. 824, 314–321 (2006)
https://doi.org/10.1063/1.2192366
Tantalum Sheet for Superconductor Diffusion Barrier Applications
AIP Conf. Proc. 824, 590–598 (2006)
https://doi.org/10.1063/1.2192399
Titanium Diffusion and Phase Formation in Tube‐Type Rod‐In‐Tube and Internal‐Tin Nb3Sn Strands
AIP Conf. Proc. 824, 504–512 (2006)
https://doi.org/10.1063/1.2192388
Controlled Overpressure Processed Bi2223 Wires for Power Applications
S. Kobayashi; T. Kato; K. Yamazaki; K. Ohkura; K. Fujino; J. Fujikami; E. Ueno; N. Ayai; M. Kikuchi; K. Hayashi; K. Sato; R. Hata
AIP Conf. Proc. 824, 688–695 (2006)
https://doi.org/10.1063/1.2192411
Cryogenic Power Converter Module Performance
AIP Conf. Proc. 824, 367–374 (2006)
https://doi.org/10.1063/1.2192373
Deformation Behavior of AZ80 Wrought Magnesium Alloy at Cryogenic Temperatures
AIP Conf. Proc. 824, 176–183 (2006)
https://doi.org/10.1063/1.2192349
Investigation of Bonding Generation during the Drawing of Multifilamentary Wires
AIP Conf. Proc. 824, 599–606 (2006)
https://doi.org/10.1063/1.2192400
High‐Cycle Fatigue Properties of Notched Specimens for Ti‐6Al‐4V ELI Alloy at Cryogenic Temperatures
AIP Conf. Proc. 824, 161–168 (2006)
https://doi.org/10.1063/1.2192347
Superconducting and Mechanical Properties of Bi‐2223/Metal Alloy Wires Composite Bulk
AIP Conf. Proc. 824, 834–839 (2006)
https://doi.org/10.1063/1.2192431
Effect of Temperature and Deformation on Nb3Sn Strands Instabilities
AIP Conf. Proc. 824, 566–574 (2006)
https://doi.org/10.1063/1.2192396
Transverse Load Degradation in Nb3Sn Cable‐in‐Conduit Conductors with Different Cable Pattern
AIP Conf. Proc. 824, 558–565 (2006)
https://doi.org/10.1063/1.2192395
Tensile, Fracture, and Fatigue Crack Growth Rate Behavior of High Manganese Steels
AIP Conf. Proc. 824, 130–137 (2006)
https://doi.org/10.1063/1.2192343
A Simple Test Method to Compare the Tensile Strengths of Metallic Substrates Used in YBa2Cu3O7−x Coated Conductors
AIP Conf. Proc. 824, 758–762 (2006)
https://doi.org/10.1063/1.2192420
Shear Strengths of Copper/Insulation Interfaces for Fusion Magnet Applications
AIP Conf. Proc. 824, 306–313 (2006)
https://doi.org/10.1063/1.2192365
Thermal and Mechanical Properties of Poly‐Dicyclopentadiene (DCPD) at Cryogenic Temperatures
AIP Conf. Proc. 824, 219–224 (2006)
https://doi.org/10.1063/1.2192354
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.