Skip Nav Destination
Issues
Application of BEM for the Visualization of Scattered Wave Fields from Flaws
AIP Conf. Proc. 700, 43–50 (2004)
https://doi.org/10.1063/1.1711604
A Simple Method to Compute Ultrasonic Wave Propagation in Layered Anisotropic Media
AIP Conf. Proc. 700, 59–66 (2004)
https://doi.org/10.1063/1.1711606
Development of an Ultrasonic Testing Simulator Using the Mass‐Spring Lattice Model
AIP Conf. Proc. 700, 67–73 (2004)
https://doi.org/10.1063/1.1711607
Modeling of Ultrasonic Scattering by Internal Cracks in an Anisotropic Component
AIP Conf. Proc. 700, 81–86 (2004)
https://doi.org/10.1063/1.1711609
Measurement Models for Predicting the Ultrasonic Response from Side‐Drilled Holes
AIP Conf. Proc. 700, 95–102 (2004)
https://doi.org/10.1063/1.1711611
Application of Ultrasonic Modeling to the Positioning of Defects in a Cladded Component
AIP Conf. Proc. 700, 103–109 (2004)
https://doi.org/10.1063/1.1711612
A Green’s Function Boundary Element Method for SH‐Wave Scattering in an Elastic Layer
AIP Conf. Proc. 700, 118–125 (2004)
https://doi.org/10.1063/1.1711614
Three‐Dimensional Boundary Element Modeling for Guided Waves Scattering from a Defect
AIP Conf. Proc. 700, 134–141 (2004)
https://doi.org/10.1063/1.1711616
On the Scattering and Mode Conversion of the A0 Lamb Wave Mode at Circular Defects in Plates
AIP Conf. Proc. 700, 142–149 (2004)
https://doi.org/10.1063/1.1711617
Far‐Field Decay of Laser‐Generated, Axisymmetric Lamb Waves
AIP Conf. Proc. 700, 158–164 (2004)
https://doi.org/10.1063/1.1711619
Calculation of Guided Wave Scattering at a Defect in a Pipe
AIP Conf. Proc. 700, 165–172 (2004)
https://doi.org/10.1063/1.1711620
Toward Active Monitoring of Piping Using Ultrasonic Guided Waves
AIP Conf. Proc. 700, 181–186 (2004)
https://doi.org/10.1063/1.1711622
Flexural Longitudinal and Torsional Mode Natural Focusing Phenomena in a Pipe
AIP Conf. Proc. 700, 193–197 (2004)
https://doi.org/10.1063/1.1711624
Analytical Solution of Leaky Rayleigh Waves at the Interface between Elastic Solids and Ideal Fluids
AIP Conf. Proc. 700, 198–205 (2004)
https://doi.org/10.1063/1.1711625
Properties of Guided Waves in Composite Plates, and Implications for NDE
AIP Conf. Proc. 700, 214–221 (2004)
https://doi.org/10.1063/1.1711627
Fe Modeling of Lamb Waves Propagation and Diffraction in Viscoelastic Composite Material Plate
AIP Conf. Proc. 700, 230–237 (2004)
https://doi.org/10.1063/1.1711629
Transient Ultrasonic Guided Waves in Bi‐Layered Anisotropic Plates with Rectangular Cross Section
AIP Conf. Proc. 700, 238–245 (2004)
https://doi.org/10.1063/1.1711630
Numerical Analysis of the Rayleigh Wave Dispersion Due to Surface Roughness
AIP Conf. Proc. 700, 262–269 (2004)
https://doi.org/10.1063/1.1711633
Stiffness Coefficients Measurement of Cylindrical Rods by Laser Ultrasonics
AIP Conf. Proc. 700, 286–293 (2004)
https://doi.org/10.1063/1.1711636
Graded Coating Inspection Using Laser Generated Surface Acoustic Waves
AIP Conf. Proc. 700, 294–301 (2004)
https://doi.org/10.1063/1.1711637
Laser‐Ultrasonic Characterization of Fiber Reinforced Composites: Effect of the Generation Laser Transverse Modes
AIP Conf. Proc. 700, 302–309 (2004)
https://doi.org/10.1063/1.1711638
Large Array Laser Ultrasonic Detector Based on Multiplexed Two Wave Mixing Using Infrared Long Pulse Laser Source
AIP Conf. Proc. 700, 310–320 (2004)
https://doi.org/10.1063/1.1711639
Development of a 3D Electromagnetic Model for Eddy Current Tubing Inspection: Application to Steam Generator Tubing
AIP Conf. Proc. 700, 321–328 (2004)
https://doi.org/10.1063/1.1711640
Numerical and Experimental Study of Eddy Current Crack Detection around Fasteners in Multi‐Layer Structures
AIP Conf. Proc. 700, 336–343 (2004)
https://doi.org/10.1063/1.1711642
Electric Potential Based on Coulomb’s Force behind Eddy Current Testing
AIP Conf. Proc. 700, 352–359 (2004)
https://doi.org/10.1063/1.1711644
On the Apparent Loss of Eddy Current Conductivity Due to Surface Roughness
AIP Conf. Proc. 700, 360–367 (2004)
https://doi.org/10.1063/1.1711645
Inspection of Bare Printed Circuit Board Using Planar Type ECT Probe
AIP Conf. Proc. 700, 374–381 (2004)
https://doi.org/10.1063/1.1711647
High Sensitivity Eddy Current Probe for Inspection of Low Conductivity Materials
AIP Conf. Proc. 700, 382–389 (2004)
https://doi.org/10.1063/1.1711648
Massively Multiplexed Eddy Current Testing and its Comparison with Pulsed Eddy Current Testing
AIP Conf. Proc. 700, 390–397 (2004)
https://doi.org/10.1063/1.1711649
Deep Crack Detection around Fastener Holes in Airplane Multi‐Layered Structures Using GMR‐Based Eddy Current Probes
AIP Conf. Proc. 700, 398–405 (2004)
https://doi.org/10.1063/1.1711650
Wireless Eddy Current Probe for Engine Health Monitoring
M. Reid; B. Graubard; R. J. Weber; J. A. Dickerson; K. Smith; D. Raulerson; L. Brasche; G. Y. Baaklini
AIP Conf. Proc. 700, 414–420 (2004)
https://doi.org/10.1063/1.1711652
3D Finite Element Modeling for Simulating Remote Field Flaw Detection in Magnetic Steam Generator Tubes
AIP Conf. Proc. 700, 421–428 (2004)
https://doi.org/10.1063/1.1711653
Incorporation of Hysteresis Effects into Magnetc Finite Element Modeling
AIP Conf. Proc. 700, 429–436 (2004)
https://doi.org/10.1063/1.1711654
Generic Algorithm of Magnetic Particle Inspection Using Finite Element Modeling
AIP Conf. Proc. 700, 437–444 (2004)
https://doi.org/10.1063/1.1711655
Thermoelectric Background Signature Due to the Presence of Material Property Gradients
AIP Conf. Proc. 700, 445–452 (2004)
https://doi.org/10.1063/1.1711656
A 2‐D Inverse Heat Conduction Formulation for Determination of Heat Source Characteristics from Thermal Images
AIP Conf. Proc. 700, 453–460 (2004)
https://doi.org/10.1063/1.1711657
Effect of Finite Flash Duration on Thermal Diffusivity Imaging of High‐Diffusivity or Thin Materials
AIP Conf. Proc. 700, 482–487 (2004)
https://doi.org/10.1063/1.1711661
Ultrasound Excited by a Pulsed Thermal Source for Two Layers Sample
AIP Conf. Proc. 700, 488–495 (2004)
https://doi.org/10.1063/1.1711662
Importance of Acoustic Chaos in Sonic IR Imaging NDE
Xiaoyan Han; Zhi Zeng; Wei Li; Md. Sawar Islam; Jianping Lu; V. Loggins; L. D. Favro; G. M. Newaz; R. L. Thomas
AIP Conf. Proc. 700, 496–500 (2004)
https://doi.org/10.1063/1.1711663
Infrared Imaging for Detection of Defects and Real‐Time Monitoring of a Consolidation Treatment in Stone Sculpture
AIP Conf. Proc. 700, 501–506 (2004)
https://doi.org/10.1063/1.1711664
Monte Carlo Simulation or Photon Transport Coupled to CAD Object Description
AIP Conf. Proc. 700, 515–521 (2004)
https://doi.org/10.1063/1.1711666
The Effect of Lead Intensification Screens on Film: Modeling and Experiment
AIP Conf. Proc. 700, 530–537 (2004)
https://doi.org/10.1063/1.1711668
Micro X‐Ray Fluorescence Imaging for Silicide Diffusion Coating Inspection
AIP Conf. Proc. 700, 538–545 (2004)
https://doi.org/10.1063/1.1711669
Phase‐Contrast X‐Ray Imaging for Nondestructive Evaluation of Materials
AIP Conf. Proc. 700, 546–553 (2004)
https://doi.org/10.1063/1.1711670
A Deterministic Approach to Brachytherapy Dosimetry and a Benchmark Problem Implementation
AIP Conf. Proc. 700, 554–564 (2004)
https://doi.org/10.1063/1.1711671
Compression of Ultrasonic NDT Image by Wavelet Based Local Quantization
AIP Conf. Proc. 700, 581–588 (2004)
https://doi.org/10.1063/1.1711674
Wavelet Neural Network Based Data Fusion for Improved Thickness Characterization
AIP Conf. Proc. 700, 589–596 (2004)
https://doi.org/10.1063/1.1711675
Independent Component Analysis for Enhanced Feature Extraction from NDE
AIP Conf. Proc. 700, 597–604 (2004)
https://doi.org/10.1063/1.1711676
A Statistical Model for Eddy‐Current Signals from Steam Generator Tubes
AIP Conf. Proc. 700, 605–612 (2004)
https://doi.org/10.1063/1.1711677
A Novel Denoising Approach Based on Multiresolution Thresholding and Its NDT Application
AIP Conf. Proc. 700, 636–642 (2004)
https://doi.org/10.1063/1.1711681
Inverse Methodology for Eddy Current Testing Using Transmitter‐Receiver Coil Probes
AIP Conf. Proc. 700, 643–650 (2004)
https://doi.org/10.1063/1.1711682
Eddy Current Testing and Sizing of Deep Cracks in a Thick Structure
AIP Conf. Proc. 700, 659–666 (2004)
https://doi.org/10.1063/1.1711684
Fast Imaging of 3‐D Flaw Using Linearized Inverse Scattering Methods
AIP Conf. Proc. 700, 674–681 (2004)
https://doi.org/10.1063/1.1711686
High‐Sensitivity Air‐Coupled Ultrasonic Imaging with the First‐Order Symmetric Lamb Mode at Zero Group Velocity
AIP Conf. Proc. 700, 687–693 (2004)
https://doi.org/10.1063/1.1711688
Tomographic Imaging of an Ultrasonic Field in a Plane Using a Linear Array
AIP Conf. Proc. 700, 694–701 (2004)
https://doi.org/10.1063/1.1711689
Real‐Time Implementation of Motion‐Based Filtering in Magneto‐Optic Imager
AIP Conf. Proc. 700, 702–712 (2004)
https://doi.org/10.1063/1.1711690
Transducer Modules for Dry‐Coupled Ultrasonic Inspection of Aircraft Structures
AIP Conf. Proc. 700, 713–720 (2004)
https://doi.org/10.1063/1.1711691
Development of Piezoelectric Acoustic Sensors and Novel Bio‐Inspired Sensor Array Architecture
AIP Conf. Proc. 700, 737–744 (2004)
https://doi.org/10.1063/1.1711694
Modeling Ultrasonic Fields of a Transducer with a Modular Multi‐Gaussian Beam Model
AIP Conf. Proc. 700, 745–752 (2004)
https://doi.org/10.1063/1.1711695
Transferring Distance‐Amplitude Correction Curves Using Ultrasonic Modeling
AIP Conf. Proc. 700, 753–760 (2004)
https://doi.org/10.1063/1.1711696
Phased Array Ultrasonic Probe Design: From Art to Science through Optimization
AIP Conf. Proc. 700, 761–768 (2004)
https://doi.org/10.1063/1.1711697
Simulation and Application of Dynamic Inspection Modes Using Ultrasonic Phased Arrays
AIP Conf. Proc. 700, 777–784 (2004)
https://doi.org/10.1063/1.1711699
Phased Array Beam Modeling Using a Discretely Orthogonal Gaussian Aperture Basis
AIP Conf. Proc. 700, 785–792 (2004)
https://doi.org/10.1063/1.1711700
Ultrasonic Phased Array Inspection of Seeded Titanium Billet
AIP Conf. Proc. 700, 809–816 (2004)
https://doi.org/10.1063/1.1711703
Phased Array for Guided Waves and Crack Detection for Airframe Structures
AIP Conf. Proc. 700, 826–833 (2004)
https://doi.org/10.1063/1.1711705
A Focused, Two Dimensional, Air‐Coupled Ultrasonic Array for Non‐Contact Generation
AIP Conf. Proc. 700, 834–842 (2004)
https://doi.org/10.1063/1.1711706
Flaw Detection in Thin Composite Beams Using Autocorrelation Method on The FRFs
AIP Conf. Proc. 700, 843–850 (2004)
https://doi.org/10.1063/1.1711707
Application of Air‐Coupled Ultrasound in NDE of Composite Space Structures
AIP Conf. Proc. 700, 851–858 (2004)
https://doi.org/10.1063/1.1711708
Development of a Novel Vibration Sensor Using Optical Fiber and its Application to Composite Materials
AIP Conf. Proc. 700, 883–890 (2004)
https://doi.org/10.1063/1.1711712
Characteristic Evaluation of Impact Responses and Damages in Composite Shell with Various Curvatures
AIP Conf. Proc. 700, 891–897 (2004)
https://doi.org/10.1063/1.1711713
A Simulation Study to Explain the Variability of Ultrasonic Attenuation Measurement in RTM Composites
AIP Conf. Proc. 700, 898–905 (2004)
https://doi.org/10.1063/1.1711714
Microstructural and Defect Characterization in Ceramic Composites Using an Ultrasonic Guided Wave Scan System
AIP Conf. Proc. 700, 906–913 (2004)
https://doi.org/10.1063/1.1711715
Non‐Destructive Inspection of Metal Matrix Composites Using Guided Waves
AIP Conf. Proc. 700, 914–921 (2004)
https://doi.org/10.1063/1.1711716
Buckling of Aluminum Honeycomb Core and Its Effect on Ultrasonic Velocity
AIP Conf. Proc. 700, 922–929 (2004)
https://doi.org/10.1063/1.1711717
Effects of Layer Properties on the Ultrasonic Resonance of Composite Spheres
AIP Conf. Proc. 700, 930–936 (2004)
https://doi.org/10.1063/1.1711718
Some Approaches of Ultrasonic Evaluation of Metal Sheets Adhesive Bonds
AIP Conf. Proc. 700, 937–943 (2004)
https://doi.org/10.1063/1.1711719
Evaluation of Amorphous Diffusion Bonding by Nonlinear Ultrasonic Method
AIP Conf. Proc. 700, 944–951 (2004)
https://doi.org/10.1063/1.1711720
Model for Deformation, Stress and Contact at Interfaces — Implications for Ultrasonic Measurements
AIP Conf. Proc. 700, 952–959 (2004)
https://doi.org/10.1063/1.1711721
Laser‐Ultrasonic Characterization of Thermal Spray Coatings
AIP Conf. Proc. 700, 968–975 (2004)
https://doi.org/10.1063/1.1711723
Imaging Defects in Thin DLC Coatings Using High Frequency Scanning Acoustic Microscopy
AIP Conf. Proc. 700, 976–983 (2004)
https://doi.org/10.1063/1.1711724
On‐Line Measurement of Lubricant Film Thickness Using Ultrasonic Reflection Coefficients
AIP Conf. Proc. 700, 984–991 (2004)
https://doi.org/10.1063/1.1711725
A Rapid Ultrasonic Method for Nondestructive Thickness Mapping of Bronze Liner in Steel‐Backed Bearing Sleeves
AIP Conf. Proc. 700, 992–999 (2004)
https://doi.org/10.1063/1.1711726
Low Frequency Vibration Approach to Assess the Performance of Wood Structural Systems
AIP Conf. Proc. 700, 1000–1007 (2004)
https://doi.org/10.1063/1.1711727
A Rayleigh‐Wave Attenuation Method for Crack Depth Determination in Asphalt Beams
AIP Conf. Proc. 700, 1015–1021 (2004)
https://doi.org/10.1063/1.1711729
Nonlinear Ultrasonic Evaluation of Concrete Microcracking
AIP Conf. Proc. 700, 1022–1026 (2004)
https://doi.org/10.1063/1.1711730
Shape Reconstruction of Three‐Dimensional Flaw by the Measurement from the Side of Cylindrical Specimen
AIP Conf. Proc. 700, 1027–1034 (2004)
https://doi.org/10.1063/1.1711731
Nondestructive Evaluation of Reactive Powder Concrete
AIP Conf. Proc. 700, 1035–1041 (2004)
https://doi.org/10.1063/1.1711732
Heat Transfer Fundamentals Applicable to Infrared Thermography of Concrete Structures
AIP Conf. Proc. 700, 1042–1049 (2004)
https://doi.org/10.1063/1.1711733
Estimation of Single‐Crystal Elastic Constants from Ultrasonic Measurements on Polycrystalline Specimens
AIP Conf. Proc. 700, 1061–1068 (2004)
https://doi.org/10.1063/1.1711735
Elasticity Imaging of Ferroelectric Domain Structure in PZT by Ultrasonic Atomic Force Microscopy
AIP Conf. Proc. 700, 1069–1075 (2004)
https://doi.org/10.1063/1.1711736
Role of Pore Size Distribution in Ultrasonic Characterization of Microporosity in Aluminum Castings
AIP Conf. Proc. 700, 1076–1082 (2004)
https://doi.org/10.1063/1.1711737
Experimental and Theoretical Investigation of Ultrasound Propagation in Materials Containing Void Inclusions
AIP Conf. Proc. 700, 1083–1090 (2004)
https://doi.org/10.1063/1.1711738
Compensating for Attenuation Differences in Ultrasonic Inspections of Titanium‐Alloy Billets
AIP Conf. Proc. 700, 1091–1098 (2004)
https://doi.org/10.1063/1.1711739
Ultrasonic Sensitivity Studies for Titanium Inspections
AIP Conf. Proc. 700, 1099–1106 (2004)
https://doi.org/10.1063/1.1711740
Rapid Low Frequency Measurement of the Acoustic Properties of Solid Viscoelastic Materials
AIP Conf. Proc. 700, 1107–1114 (2004)
https://doi.org/10.1063/1.1711741
Characterization of Retrogression and Re‐Aging Heat Treatment of AA7075‐T6 Using Nonlinear Acoustics and Eddy Current
AIP Conf. Proc. 700, 1115–1121 (2004)
https://doi.org/10.1063/1.1711742
Impedance Spectroscopy of Liquid‐Phase Sintered Silicon Carbide
AIP Conf. Proc. 700, 1122–1128 (2004)
https://doi.org/10.1063/1.1711743
Epoxy Thermosets: The Detection of Adverse Stoichiometry Using Ultrasonic, Dielectric and NMR Techniques
AIP Conf. Proc. 700, 1129–1134 (2004)
https://doi.org/10.1063/1.1711744
A Study on Annealing Effects of P‐CdIn2Te4 Single Crystal Obtained from Photoluminescence Measurement
AIP Conf. Proc. 700, 1140–1147 (2004)
https://doi.org/10.1063/1.1711746
A Study on the Splitting of the Valance Band for a CdIn2te4 Single Crystal Using Photocurrent Measurement
AIP Conf. Proc. 700, 1148–1154 (2004)
https://doi.org/10.1063/1.1711747
Characterization of Effluents Given off by Wiring Insulation
AIP Conf. Proc. 700, 1155–1161 (2004)
https://doi.org/10.1063/1.1711748
A Monte‐Carlo Model for Microstructure‐Induced Ultrasonic Signal Fluctuations in Titanium Alloy Inspections
AIP Conf. Proc. 700, 1170–1177 (2004)
https://doi.org/10.1063/1.1711750
A 2‐D Numerical Simulation Study of Microstructure‐Induced Ultrasonic Beam Distortions
AIP Conf. Proc. 700, 1178–1186 (2004)
https://doi.org/10.1063/1.1711751
The Measurement of Applied Stresses Using the Polarization of Rayleigh Surface Waves
AIP Conf. Proc. 700, 1187–1191 (2004)
https://doi.org/10.1063/1.1711752
Investigation of local rayleigh wave velocity dispersion due to surface residual stress
AIP Conf. Proc. 700, 1192–1199 (2004)
https://doi.org/10.1063/1.1711753
Residual Stress Assessment in Surface‐Treated Metals by Laser‐Ultrasonic Spectroscopy
AIP Conf. Proc. 700, 1208–1215 (2004)
https://doi.org/10.1063/1.1711755
Effect of Thermal Stresses Along Crack Surface on Ultrasonic Response
AIP Conf. Proc. 700, 1224–1231 (2004)
https://doi.org/10.1063/1.1711757
Recovery of Through‐Thickness Texture Profiles in Sheet Metals by Resonance Spectroscopy
AIP Conf. Proc. 700, 1232–1239 (2004)
https://doi.org/10.1063/1.1711758
On the Detection of Creep Damage in a Directionally Solidified Nickel Base Superalloy Using Nonlinear Ultrasound
AIP Conf. Proc. 700, 1248–1255 (2004)
https://doi.org/10.1063/1.1711760
Fatigue Crack Closure Analysis Using Nonlinear Ultrasound
AIP Conf. Proc. 700, 1256–1263 (2004)
https://doi.org/10.1063/1.1711761
Characterization of Surface‐Breaking Tight Cracks Using Laser‐Ultrasonic Shadowing
AIP Conf. Proc. 700, 1264–1271 (2004)
https://doi.org/10.1063/1.1711762
Magnetic Barkhausen Noise and Neutron Diffraction Techniques for the Study of Intergranular Residual Strains in Mild Steel
AIP Conf. Proc. 700, 1288–1295 (2004)
https://doi.org/10.1063/1.1711765
Evaluation of Stress Loaded Steel Samples Using Selected Electromagnetic Methods
AIP Conf. Proc. 700, 1296–1303 (2004)
https://doi.org/10.1063/1.1711766
Electromagnetic Detection of Stress Gradients at the Surfaces of Metals
AIP Conf. Proc. 700, 1304–1311 (2004)
https://doi.org/10.1063/1.1711767
Magnetic Nondestructive Investigation of Ferromagnetic Alloys Subjected to Stress and Fatigue
AIP Conf. Proc. 700, 1312–1319 (2004)
https://doi.org/10.1063/1.1711768
Evaluation of Stress Distribution in Magnetic Materials Using a Magnetic Imaging System
AIP Conf. Proc. 700, 1320–1327 (2004)
https://doi.org/10.1063/1.1711769
Barkhausen Effect and Acoustic Emission in a Metallic Glass—Preliminary Results
AIP Conf. Proc. 700, 1328–1335 (2004)
https://doi.org/10.1063/1.1711770
Automated Measurement of Corrosion Damage Using Edge of Light Technique
AIP Conf. Proc. 700, 1347–1354 (2004)
https://doi.org/10.1063/1.1711772
Quantifying Aircraft Hidden Corrosion by Using Multi‐Modal NDI Techniques
AIP Conf. Proc. 700, 1355–1362 (2004)
https://doi.org/10.1063/1.1711773
Development of a Fieldable Air‐Coupled Ultrasonic Inspection System
AIP Conf. Proc. 700, 1368–1375 (2004)
https://doi.org/10.1063/1.1711775
Quantitative Air‐Coupled Ultrasonic Materials Characterization with Highly Focussed Acoustic Beams
AIP Conf. Proc. 700, 1376–1381 (2004)
https://doi.org/10.1063/1.1711776
V(X) Ultrasonic Material Characterization Systems Employing Pairs of Line‐Line and Line‐Point Focused Transducers
AIP Conf. Proc. 700, 1382–1389 (2004)
https://doi.org/10.1063/1.1711777
Expert System Development for Use in Theoretical Ultrasonic NDT Simulations
AIP Conf. Proc. 700, 1390–1397 (2004)
https://doi.org/10.1063/1.1711778
Leak Location in Plates: Compensation for Multi‐Mode dispersion
AIP Conf. Proc. 700, 1398–1405 (2004)
https://doi.org/10.1063/1.1711779
Optoacoustic Systems for Subsurface Materials Characterization
AIP Conf. Proc. 700, 1406–1413 (2004)
https://doi.org/10.1063/1.1711780
N‐Scan®: New Vibro‐Modulation System for Crack Detection, Monitoring and Characterization
AIP Conf. Proc. 700, 1414–1421 (2004)
https://doi.org/10.1063/1.1711781