Skip Nav Destination
Issues
Tutorial on single- and two-component two-phase flow and heat transfer: Commonality and difference
AIP Conf. Proc. 608, 3–13 (2002)
https://doi.org/10.1063/1.1449702
Propylene loop heat pipe with a lightweight, flexible, deployable radiator
AIP Conf. Proc. 608, 37–48 (2002)
https://doi.org/10.1063/1.1449706
Loop heat pipes and capillary pumped loops-an applications perspective
AIP Conf. Proc. 608, 49–56 (2002)
https://doi.org/10.1063/1.1449707
Feasibility demonstration of a mechanically pumped two-phase cooling loop for the AMS-2 tracker experiment
AIP Conf. Proc. 608, 57–64 (2002)
https://doi.org/10.1063/1.1449708
Development and testing of a planar, silicon mini-capillary pumped loop
AIP Conf. Proc. 608, 81–87 (2002)
https://doi.org/10.1063/1.1449711
Thermal performance of an annealed pyrolytic graphite solar collector
AIP Conf. Proc. 608, 88–93 (2002)
https://doi.org/10.1063/1.1449712
Secondary wick operation principle and performance mapping in LHP and FLHP evaporators
AIP Conf. Proc. 608, 94–103 (2002)
https://doi.org/10.1063/1.1449713
Single-phase natural circulation in a rectangular loop in micro-gravity condition
AIP Conf. Proc. 608, 104–111 (2002)
https://doi.org/10.1063/1.1449714
Corrections for heat flux measurements taken on launch vehicles
AIP Conf. Proc. 608, 112–118 (2002)
https://doi.org/10.1063/1.1449715
Challenges and fundamentals of modeling heat pipes’ startup from a frozen state
AIP Conf. Proc. 608, 127–138 (2002)
https://doi.org/10.1063/1.1449717
Current capabilities of “HPTAM” for modeling high-temperature heat pipes’ startup from a frozen state
AIP Conf. Proc. 608, 139–147 (2002)
https://doi.org/10.1063/1.1449718
Progress in hardware development for the SAFE heatpipe reactor system
AIP Conf. Proc. 608, 148–155 (2002)
https://doi.org/10.1063/1.1449719
Saturation pool boiling of HFE-7100 dielectric liquid in a simulated reduced gravity
AIP Conf. Proc. 608, 181–188 (2002)
https://doi.org/10.1063/1.1449723
Microgravity experiments on dual vapor bubbles of self-wetting fluid
AIP Conf. Proc. 608, 189–196 (2002)
https://doi.org/10.1063/1.1449724
Wax-actuated heat switch for Mars surface applications
AIP Conf. Proc. 608, 211–213 (2002)
https://doi.org/10.1063/1.1449727
Advanced heat transfer devices based on mass forces in coiled flows
AIP Conf. Proc. 608, 214–219 (2002)
https://doi.org/10.1063/1.1449728
MEMS loop heat pipe based on coherent porous silicon technology
Debra Cytrynowicz; Mohammed Hamdan; Praveen Medis; Ahmed Shuja; H. Thurman Henderson; Frank M. Gerner; Eric Golliher
AIP Conf. Proc. 608, 220–232 (2002)
https://doi.org/10.1063/1.1449729
An electrodynamic tether system for propulsion and power generation in a Jovian mission
AIP Conf. Proc. 608, 269–276 (2002)
https://doi.org/10.1063/1.1449734
The bridge to space: Elevator sizing & performance analysis
AIP Conf. Proc. 608, 286–290 (2002)
https://doi.org/10.1063/1.1449736
Analytical study of optimization of multi-stage spinning tether orbit transfer system
AIP Conf. Proc. 608, 291–298 (2002)
https://doi.org/10.1063/1.1449737
GeoSail: A novel solar sail mission concept for geospace
AIP Conf. Proc. 608, 305–312 (2002)
https://doi.org/10.1063/1.1449739
Wake closure characteristics and afterbody heating on a Mars sample return orbiter
AIP Conf. Proc. 608, 318–336 (2002)
https://doi.org/10.1063/1.1449741
A silicon carbide pressure sensor for harsh environment
AIP Conf. Proc. 608, 353–356 (2002)
https://doi.org/10.1063/1.1449744
Advanced spacecraft designs in support of human missions to earth’s neighborhood
AIP Conf. Proc. 608, 357–364 (2002)
https://doi.org/10.1063/1.1449745
An examination of emerging in-space propulsion concepts for one-year crewed mars missions
AIP Conf. Proc. 608, 365–373 (2002)
https://doi.org/10.1063/1.1449746
Field emission cathodes for electrodynamic tethers: Identifying compatible cathode materials
AIP Conf. Proc. 608, 381–384 (2002)
https://doi.org/10.1063/1.1449748
UV rigidized carbon-reinforced isogrid boom for Gossamer applications
AIP Conf. Proc. 608, 406–413 (2002)
https://doi.org/10.1063/1.1449752
Potential use of photovolatile polymers in solar sails
AIP Conf. Proc. 608, 418–424 (2002)
https://doi.org/10.1063/1.1449754
Dynamic and optical characterization of dusty plasmas for use as solar sails
AIP Conf. Proc. 608, 425–432 (2002)
https://doi.org/10.1063/1.1449755
Magnetic inflation produced by the Mini-Magnetospheric Plasma Propulsion (M2P2) prototype
AIP Conf. Proc. 608, 433–440 (2002)
https://doi.org/10.1063/1.1449756
Development of a 3-D hybrid code and its application to M2P2
AIP Conf. Proc. 608, 441–446 (2002)
https://doi.org/10.1063/1.1449757
Sail deployment by microwave beam—experiments and simulations
Gregory Benford; Olga Goronostavea; Alan Prichard; James Benford; Lisa Nakodym; David Vaughan; Henry Harris
AIP Conf. Proc. 608, 447–451 (2002)
https://doi.org/10.1063/1.1449758
Control of microwave-propelled sails using delayed measurements
AIP Conf. Proc. 608, 452–456 (2002)
https://doi.org/10.1063/1.1449759
Experimental tests of beam-riding sail dynamics
James Benford; Gregory Benford; Olga Gornostaeva; Eusebio Garate; Michael Anderson; Alan Prichard; Henry Harris
AIP Conf. Proc. 608, 457–461 (2002)
https://doi.org/10.1063/1.1449760
Solar thermal vacuum testing of an integrated membrane concentrator system at the NASA GRC tank 6
AIP Conf. Proc. 608, 470–477 (2002)
https://doi.org/10.1063/1.1449762
Optical and thermal characterization of membrane reflector materials for solar orbit transfer vehicles
AIP Conf. Proc. 608, 478–485 (2002)
https://doi.org/10.1063/1.1449763
High temperature solar vacuum testing of a sapphire refractive secondary concentrator
AIP Conf. Proc. 608, 494–501 (2002)
https://doi.org/10.1063/1.1449765
Development and design of a zero-G liquid quantity gauge for a solar thermal vehicle
AIP Conf. Proc. 608, 502–509 (2002)
https://doi.org/10.1063/1.1449766
Kinetic modeling of the electron current collection to a moving bare electrodynamic tether
AIP Conf. Proc. 608, 526–533 (2002)
https://doi.org/10.1063/1.1449769
Current-produced magnetic field effects on current collection
AIP Conf. Proc. 608, 534–536 (2002)
https://doi.org/10.1063/1.1449770
A preliminary assessment of grid spheres used as end-body electrodes for electrodynamic tethers
AIP Conf. Proc. 608, 537–547 (2002)
https://doi.org/10.1063/1.1449771
Design and analysis of the SAFE-400 space fission reactor
AIP Conf. Proc. 608, 578–588 (2002)
https://doi.org/10.1063/1.1449775
Phase 1 space fission propulsion system design considerations
Mike Houts; Melissa Van Dyke; Tom Godfroy; Kevin Pedersen; James Martin; Ricky Dickens; Pat Salvail; Ivana Hrbud; Robert Carter
AIP Conf. Proc. 608, 589–595 (2002)
https://doi.org/10.1063/1.1449776
Evaluation of high-performance space nuclear electric generators for electric propulsion application
AIP Conf. Proc. 608, 617–626 (2002)
https://doi.org/10.1063/1.1449780
A probability analysis of space radiator segmenting for increased reliability and reduced mass
AIP Conf. Proc. 608, 658–665 (2002)
https://doi.org/10.1063/1.1449785
Thermal stress calculations for heatpipe-cooled reactor power systems
AIP Conf. Proc. 608, 666–672 (2002)
https://doi.org/10.1063/1.1449786
Thermal expansion and reactivity feedback analysis for the HOMER-15 and SAFE-300 reactors
AIP Conf. Proc. 608, 673–680 (2002)
https://doi.org/10.1063/1.1449787
Old myths and new realities: A 21st century space reactor cost estimate
AIP Conf. Proc. 608, 686–691 (2002)
https://doi.org/10.1063/1.1449789
Phase 1 space fission propulsion system testing and development progress
Melissa Van Dyke; Mike Houts; Tom Godfroy; Ricky Dickens; David Poston; Rick Kapernick; Bob Reid; Pat Salvail; Peter Ring
AIP Conf. Proc. 608, 692–697 (2002)
https://doi.org/10.1063/1.1449790
Potential operating orbits for fission electric propulsion systems driven by the SAFE-400
AIP Conf. Proc. 608, 717–721 (2002)
https://doi.org/10.1063/1.1449793
Solid rocket motor fire tests: Phases 1 and 2
AIP Conf. Proc. 608, 740–747 (2002)
https://doi.org/10.1063/1.1449797
Antimatter-initiated microfusion: Direct energy conversion for propulsion applications
AIP Conf. Proc. 608, 787–788 (2002)
https://doi.org/10.1063/1.1449802
Ion storage tests with the high performance antiproton trap (HiPAT)
AIP Conf. Proc. 608, 793–800 (2002)
https://doi.org/10.1063/1.1449804
High performance manned interplanetary space vehicle using Inertial Electrostatic Fusion
AIP Conf. Proc. 608, 819–827 (2002)
https://doi.org/10.1063/1.1449807
Review of experimental research with models of two-circuit liquid-metal power installation for space application
AIP Conf. Proc. 608, 845–851 (2002)
https://doi.org/10.1063/1.1449810
Status of Brayton cycle power conversion development at NASA GRC
AIP Conf. Proc. 608, 865–871 (2002)
https://doi.org/10.1063/1.1449813
Structural analyses of Stirling power-convertor heater head for long-term reliability, durability, and performance
AIP Conf. Proc. 608, 880–887 (2002)
https://doi.org/10.1063/1.1449815
Impact testing of a Stirling convertor’s linear alternator
AIP Conf. Proc. 608, 888–897 (2002)
https://doi.org/10.1063/1.1449816
Stirling convertor performance mapping test results
Songgang Qiu; Allen A. Peterson; Maurice A. White; Franklyn Faultersack; Darin L. Redinger; Stephen L. Petersen
AIP Conf. Proc. 608, 898–905 (2002)
https://doi.org/10.1063/1.1449817
End-to-End demonstrator of the Safe Affordable Fission Engine (SAFE) 30: Power conversion and ion engine operation
AIP Conf. Proc. 608, 906–911 (2002)
https://doi.org/10.1063/1.1449818
Effect of structural mount dynamics on a pair of operating Stirling Convertors
AIP Conf. Proc. 608, 918–928 (2002)
https://doi.org/10.1063/1.1449820
Miniature turbo-Brayton technologies for space-borne thermal-to-electric power converters
AIP Conf. Proc. 608, 929–938 (2002)
https://doi.org/10.1063/1.1449821
Property comparisons of commercially available silica-based microporous insulations I. Machinability and thermal dimensional stability
Daniel P. Kramer; Dennis C. McNeil; Joseph D. Ruhkamp; Donna J. Wells; Robert L. Stringer; Edwin I. Howell
AIP Conf. Proc. 608, 956–962 (2002)
https://doi.org/10.1063/1.1449825
Production and properties of Mo-41%Re for AMTEC cell construction
AIP Conf. Proc. 608, 963–971 (2002)
https://doi.org/10.1063/1.1449826
Outgassing and vaporization considerations in milliwatt generators designed for 20-year missions
AIP Conf. Proc. 608, 989–997 (2002)
https://doi.org/10.1063/1.1449829
A three-dimensional, performance model of segmented thermoelectric converters
AIP Conf. Proc. 608, 998–1006 (2002)
https://doi.org/10.1063/1.1449830
A performance comparison of SiGe and skutterudite based segmented thermoelectric devices
AIP Conf. Proc. 608, 1007–1015 (2002)
https://doi.org/10.1063/1.1449831
Development of parallel circuitry in milliwatt generators for space applications
AIP Conf. Proc. 608, 1016–1021 (2002)
https://doi.org/10.1063/1.1449832
Conceptual design of high power advanced low mass (HPALM) solar thermionic power system
AIP Conf. Proc. 608, 1028–1036 (2002)
https://doi.org/10.1063/1.1449834
Small fission power systems for Mars
Ronald J. Lipinski; Steven A. Wright; Martin P. Sherman; Roger X. Lenard; Regina A. Talandis; David I. Poston; Richard Kapernick; Ray Guffee; Robert Reid; Jay Elson; James Lee
AIP Conf. Proc. 608, 1043–1053 (2002)
https://doi.org/10.1063/1.1449836
Small fission power systems for NEP
Ronald J. Lipinski; Steven A. Wright; Martin P. Sherman; Roger X. Lenard; Albert C. Marshall; Regina A. Talandis; David I. Poston; Richard Kapernick; Ray Guffee; Robert Reid; Jay Elson; James Lee
AIP Conf. Proc. 608, 1054–1062 (2002)
https://doi.org/10.1063/1.1449837
Overview of materials technologies for space nuclear power and propulsion
AIP Conf. Proc. 608, 1063–1073 (2002)
https://doi.org/10.1063/1.1449838
Preliminary study of impact of fuel options on performance of Nuclear Thermal Propulsion (NTP) concepts
AIP Conf. Proc. 608, 1084–1095 (2002)
https://doi.org/10.1063/1.1449840
Design of a heatpipe-cooled Mars-surface fission reactor
David I. Poston; Richard J. Kapernick; Ray M. Guffee; Robert S. Reid; Ronald J. Lipinski; Steven A. Wright; Regina A. Talandis
AIP Conf. Proc. 608, 1096–1106 (2002)
https://doi.org/10.1063/1.1449841
Accelerating the introduction of HTS products for a broad range of electric power and industrial applications
AIP Conf. Proc. 608, 1107–1116 (2002)
https://doi.org/10.1063/1.1449842
Operating experience of the southwire high-temperature superconducting cable project
AIP Conf. Proc. 608, 1117–1123 (2002)
https://doi.org/10.1063/1.1449843
Stability and protection issues for high-temperature superconducting systems
AIP Conf. Proc. 608, 1124–1131 (2002)
https://doi.org/10.1063/1.1449844
Reliable commercial high temperature superconductor wire for space missions
AIP Conf. Proc. 608, 1132–1138 (2002)
https://doi.org/10.1063/1.1449845
Coated conductor scale-up program at IGC-SuperPower
AIP Conf. Proc. 608, 1163–1167 (2002)
https://doi.org/10.1063/1.1449849
Potential use of high temperature superconductors in satellite power transmission and distribution systems
AIP Conf. Proc. 608, 1168–1177 (2002)
https://doi.org/10.1063/1.1449850
A strategy for achieving high reliability for reusable launch vehicles (RLVs)
AIP Conf. Proc. 608, 1188–1191 (2002)
https://doi.org/10.1063/1.1449853
Remote leak detection: The Rayleigh Intensity technique
AIP Conf. Proc. 608, 1213–1222 (2002)
https://doi.org/10.1063/1.1449857
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.