Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 3243, Issue 1

23 December 2024

III INTERNATIONAL SCIENTIFIC AND PRACTICAL CONFERENCE “TECHNOLOGIES, MATERIALS SCIENCE AND ENGINEERING” (EEA-III 2024)

8–10 April 2024

Dushanbe, Republic of Tajikistan

All Issues

Cover Image

Cover Image

In this Issue

PRELIMINARY
ARTICLES

PRELIMINARY

Preface III International Scientific and Practical Conference “Technologies, Materials Science and Engineering” (EEA-III-2024)

AIP Conf. Proc. 3243, 010001 (2024) https://doi.org/10.1063/12.0034304

View articletitled, Preface III International Scientific and Practical Conference “Technologies, Materials Science and Engineering” (EEA-III-2024)

Open the PDF for in another window

ARTICLES

Precision of copper from technological solutions for copper production in the appearance of high-fuel compounds

Mastura Aripova; Zukhra Kadirova; Sirojiddin Shamatov; Olmos Boltayev; Ilkhom Rakhmanov; Sherzod Karshiboyev; Asadjon Kambarov

AIP Conf. Proc. 3243, 020001 (2024) https://doi.org/10.1063/5.0247275

Abstract

View articletitled, Precision of copper from technological solutions for copper production in the appearance of high-fuel compounds

Open the PDF for in another window

On a possible anomaly in the mass of maximon: Materiality of information?

Viacheslav S. Okunev

AIP Conf. Proc. 3243, 020002 (2024) https://doi.org/10.1063/5.0247512

Abstract

View articletitled, On a possible anomaly in the mass of maximon: Materiality of information?

Open the PDF for in another window

Influence of zirconium dioxide and carbon fibers on mechanical and tribological properties of polytetrafluoroethylene

Andrey Vasilev; Tatyana Struchkova; Nadezhda Lazareva; Aitalina Okhlopkova

AIP Conf. Proc. 3243, 020003 (2024) https://doi.org/10.1063/5.0247490

Abstract

View articletitled, Influence of zirconium dioxide and carbon fibers on mechanical and tribological properties of polytetrafluoroethylene

Open the PDF for in another window

Investigation of the effect of ultrasound on plastic deformation processes and physical and mechanical properties of materials during their static and dynamic loading

Evgeniy Kuz’min; Mikhail Korolev; Vladimir Lysak; Sergey Kuz’min

AIP Conf. Proc. 3243, 020004 (2024) https://doi.org/10.1063/5.0247258

Abstract

View articletitled, Investigation of the effect of ultrasound on plastic deformation processes and physical and mechanical properties of materials during their static and dynamic loading

Open the PDF for in another window

Conditions for the implementation of the twin nucleation mechanism as applied to martensite

Yuri Dolgachev; Viktor Pustovoit

AIP Conf. Proc. 3243, 020005 (2024) https://doi.org/10.1063/5.0247274

Abstract

View articletitled, Conditions for the implementation of the twin nucleation mechanism as applied to martensite

Open the PDF for in another window

Improvement of constructions and justification of parameters of the centering tensioner of the conveyor

Bahtiyorjon Davidbaev; Sultanali Zulpiev; Nargiza Davidbaeva; Urmataym Abdivap Kyzy

AIP Conf. Proc. 3243, 020006 (2024) https://doi.org/10.1063/5.0249608

Abstract

View articletitled, Improvement of constructions and justification of parameters of the centering tensioner of the conveyor

Open the PDF for in another window

Disc friction shock absorbers for forestry and transport vehicles

Roman Dobretsov; Andrey Krasilnikov; Andrey Karnaukhov; Sergey Voinash; Viktoriia Sokolova; Ramil Zagidullin; Adel Yakushev

AIP Conf. Proc. 3243, 020007 (2024) https://doi.org/10.1063/5.0247497

Abstract

View articletitled, Disc friction shock absorbers for forestry and transport vehicles

Open the PDF for in another window

Road markings with increased strength, durability and light emission

Rustem Sakhapov; Ramil Zagidullin; Adel Yakushev; A. Kadyrov; Sergey Voinash; Alexandra Orekhovskaya; Viktoriia Sokolova

AIP Conf. Proc. 3243, 020008 (2024) https://doi.org/10.1063/5.0247500

Abstract

View articletitled, Road markings with increased strength, durability and light emission

Open the PDF for in another window

Study of working mechanisms of a technological machine for mechanical processing of viscous-elastic materials

Gayrat Bahadirov; Ayder Nabiev; Furkat Rakhimov; Gerasim Tsoy

AIP Conf. Proc. 3243, 020009 (2024) https://doi.org/10.1063/5.0247389

Abstract

View articletitled, Study of working mechanisms of a technological machine for mechanical processing of viscous-elastic materials

Open the PDF for in another window

Optimization of the laser hardening mode of GCr15 bearing steel

Sergei Petrochenko; Qingle Hao; Xinshan Yu; Konstantin Poleshenko

AIP Conf. Proc. 3243, 020010 (2024) https://doi.org/10.1063/5.0247361

Abstract

View articletitled, Optimization of the laser hardening mode of GCr15 bearing steel

Open the PDF for in another window

Etheric field as a physical object

Archpriest Alexander I. Kruglov; Viacheslav S. Okunev

AIP Conf. Proc. 3243, 020011 (2024) https://doi.org/10.1063/5.0247511

Abstract

View articletitled, Etheric field as a physical object

Open the PDF for in another window

Diagnostics in the life cycle of railway automation and telemechanics devices

Evgeny Tarasov; Vadim Nadezhkin; Alexander Zolkin; Egor Dudukalov; Alexey Bityutskiy

AIP Conf. Proc. 3243, 020012 (2024) https://doi.org/10.1063/5.0247450

Abstract

View articletitled, Diagnostics in the life cycle of railway automation and telemechanics devices

Open the PDF for in another window

Modeling an optimal PID controller for a three-degree-of-freedom robot manipulator

Kifayat Mammadova; Yegana Aliyeva; Aytan Aliyeva

AIP Conf. Proc. 3243, 020013 (2024) https://doi.org/10.1063/5.0249384

Abstract

View articletitled, Modeling an optimal PID controller for a three-degree-of-freedom robot manipulator

Open the PDF for in another window

Principles of modeling and optimal control of a fraction purification reactor from micro impurities

Aygun Safarova; Elchin Melikov; Tamella Magerramova

AIP Conf. Proc. 3243, 020014 (2024) https://doi.org/10.1063/5.0247869

Abstract

View articletitled, Principles of modeling and optimal control of a fraction purification reactor from micro impurities

Open the PDF for in another window

Carbon-containing materials for operation in spacecraft friction units at high temperatures

M. N. Roshchin

AIP Conf. Proc. 3243, 020015 (2024) https://doi.org/10.1063/5.0247352

Abstract

View articletitled, Carbon-containing materials for operation in spacecraft friction units at high temperatures

Open the PDF for in another window

Improving the geological structure by applying sand control methods

Marat Khabibullin

AIP Conf. Proc. 3243, 020016 (2024) https://doi.org/10.1063/5.0247764

Abstract

View articletitled, Improving the geological structure by applying sand control methods

Open the PDF for in another window

On the need for differentiated choice of well spacing in carbonate reservoirs

Lyubov Kuleshova; Ruslan Gilyazetdinov; Vyacheslav V. Mukhametshin

AIP Conf. Proc. 3243, 020017 (2024) https://doi.org/10.1063/5.0247706

Abstract

View articletitled, On the need for differentiated choice of well spacing in carbonate reservoirs

Open the PDF for in another window

Sand control technology for oil wells

Ramzis Kadyrov; Rif Vafin; Vyacheslav V. Mukhametshin; Lyubov Kuleshova; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020018 (2024) https://doi.org/10.1063/5.0247711

Abstract

View articletitled, Sand control technology for oil wells

Open the PDF for in another window

Using the grouping procedure to improve the efficiency of field development

Vyacheslav Sh. Mukhametshin; Rif Vafin; Dina Kobishcha; Lyubov Kuleshova

AIP Conf. Proc. 3243, 020019 (2024) https://doi.org/10.1063/5.0247753

Abstract

View articletitled, Using the grouping procedure to improve the efficiency of field development

Open the PDF for in another window

Optimization of production well performance by reducing the wellhead pressure to line pressure and selecting the optimal tubing diameter at Urengoiskoe field

Elvira Almukhametova; Guzel Gazizullina

AIP Conf. Proc. 3243, 020020 (2024) https://doi.org/10.1063/5.0247782

Abstract

View articletitled, Optimization of production well performance by reducing the wellhead pressure to line pressure and selecting the optimal tubing diameter at Urengoiskoe field

Open the PDF for in another window

Prerequisites for new technologies in repair and insulation works

Ramzis Kadyrov; Lyubov Kuleshova; Vyacheslav V. Mukhametshin

AIP Conf. Proc. 3243, 020021 (2024) https://doi.org/10.1063/5.0247755

Abstract

View articletitled, Prerequisites for new technologies in repair and insulation works

Open the PDF for in another window

Application of strengthening compositions in floral printing on mixed fiber

Gulrukh Eshdavlatova; Khalavat Ismailova; Oktyabr Rakhimov

AIP Conf. Proc. 3243, 020022 (2024) https://doi.org/10.1063/5.0247303

Abstract

View articletitled, Application of strengthening compositions in floral printing on mixed fiber

Open the PDF for in another window

Experimental verification of internal friction model, based on the Boltzmann superposition principle, applied to the temperature influence on different wood types and species

Aleksandr Russu; Vladimir Shamaev; Oksana Garkusha

AIP Conf. Proc. 3243, 020023 (2024) https://doi.org/10.1063/5.0247264

Abstract

View articletitled, Experimental verification of internal friction model, based on the Boltzmann superposition principle, applied to the temperature influence on different wood types and species

Open the PDF for in another window

Studying the rheological properties of thickening compositions for fabric padding based on mixed fibers

G. E. Eshdavlatova; A. Kh. Panjiyev

AIP Conf. Proc. 3243, 020024 (2024) https://doi.org/10.1063/5.0247308

Abstract

View articletitled, Studying the rheological properties of thickening compositions for fabric padding based on mixed fibers

Open the PDF for in another window

Accident tolerant materials for light water reactor

Viacheslav S. Okunev

AIP Conf. Proc. 3243, 020025 (2024) https://doi.org/10.1063/5.0247509

Abstract

View articletitled, Accident tolerant materials for light water reactor

Open the PDF for in another window

Dynamics of a flexible rotor on magnetorheological squeeze dampers

Alexander Fetisov; Yuri Kazakov; Maksim Litovchenko

AIP Conf. Proc. 3243, 020026 (2024) https://doi.org/10.1063/5.0247454

Abstract

View articletitled, Dynamics of a flexible rotor on magnetorheological squeeze dampers

Open the PDF for in another window

Forecasting the productivity coefficient of oil wells based on the use of indirect and adjacent geological and field information

Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020027 (2024) https://doi.org/10.1063/5.0247705

Abstract

View articletitled, Forecasting the productivity coefficient of oil wells based on the use of indirect and adjacent geological and field information

Open the PDF for in another window

Improving the efficiency of solving problems of evaluating the effectiveness of the use of reservoir opening technologies in conditions of noisy information

Lyubov Kuleshova; Vyacheslav V. Mukhametshin; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020028 (2024) https://doi.org/10.1063/5.0247757

Abstract

View articletitled, Improving the efficiency of solving problems of evaluating the effectiveness of the use of reservoir opening technologies in conditions of noisy information

Open the PDF for in another window

Complex geological and statistical modeling of productivity of deposits of the coal system of the Ural-Volga region, composed of carbonate reservoirs

Lyubov Kuleshova

AIP Conf. Proc. 3243, 020029 (2024) https://doi.org/10.1063/5.0247710

Abstract

View articletitled, Complex geological and statistical modeling of productivity of deposits of the coal system of the Ural-Volga region, composed of carbonate reservoirs

Open the PDF for in another window

Selection of optimal frequency range of bending waves for inspection of building

Fan Chung Duc; Savin Sergey; Khegai Aleksey; Le Van Trong

AIP Conf. Proc. 3243, 020030 (2024) https://doi.org/10.1063/5.0247283

Abstract

View articletitled, Selection of optimal frequency range of bending waves for inspection of building

Open the PDF for in another window

Forced vibrations of the feeding cylinder of pneumomechanical spinning machines, having an elastic shell

Otabek Mirzayev; Zair Uzakov; Zafar Uzakov; Zafar Boyirov; Dildora Kilicheva

AIP Conf. Proc. 3243, 020031 (2024) https://doi.org/10.1063/5.0247386

Abstract

View articletitled, Forced vibrations of the feeding cylinder of pneumomechanical spinning machines, having an elastic shell

Open the PDF for in another window

Increasing the energy efficiency of electric locomotives by determining the residual life of traction motors under operating conditions

Evgeny Tretyakov; Ilya Denisov; Anton Solovyov; Dmitriy Solovyov; Andrey Shilyakov

AIP Conf. Proc. 3243, 020032 (2024) https://doi.org/10.1063/5.0247288

Abstract

View articletitled, Increasing the energy efficiency of electric locomotives by determining the residual life of traction motors under operating conditions

Open the PDF for in another window

Properties of multi-material samples from nickel and copper alloys: Computer simulation and experimental results

Alexey Orlov; Arseniy Repnin; Eduard Farber; Evgenii Borisov; Anatoly Popovich

AIP Conf. Proc. 3243, 020033 (2024) https://doi.org/10.1063/5.0247255

Abstract

View articletitled, Properties of multi-material samples from nickel and copper alloys: Computer simulation and experimental results

Open the PDF for in another window

Investigation of photodestruction of flame-retardant intumescentecoatings modified with carbon nanostructures

Marina Simonova; Aleksey Ivanov; Nikolai Romanov

AIP Conf. Proc. 3243, 020034 (2024) https://doi.org/10.1063/5.0247345

Abstract

View articletitled, Investigation of photodestruction of flame-retardant intumescentecoatings modified with carbon nanostructures

Open the PDF for in another window

Enhancing predictive maintenance in the industrial sector: A comparative analysis of machine learning models

Semen Levin

AIP Conf. Proc. 3243, 020035 (2024) https://doi.org/10.1063/5.0247617

Abstract

View articletitled, Enhancing predictive maintenance in the industrial sector: A comparative analysis of machine learning models

Open the PDF for in another window

The effect of heat treatment on the structure and phase composition of 70S-6 - 309LSI bimetal obtained by the WAAM method

Dmitry Shatagin; Dmitry Ryabov; Mikhail Chernigin; Natalya Klochkova; Alexey Davydov

AIP Conf. Proc. 3243, 020036 (2024) https://doi.org/10.1063/5.0247353

Abstract

View articletitled, The effect of heat treatment on the structure and phase composition of 70S-6 - 309LSI bimetal obtained by the WAAM method

Open the PDF for in another window

The use of industrial waste in the production of building materials

Natella Jabbarova; Maya Abdullayeva

AIP Conf. Proc. 3243, 020037 (2024) https://doi.org/10.1063/5.0247338

Abstract

View articletitled, The use of industrial waste in the production of building materials

Open the PDF for in another window

Vortex rectification stages with low hydraulic resistance

A. V. Kustov; M. M. Bayandina; Ya. S. Goncharova

AIP Conf. Proc. 3243, 020038 (2024) https://doi.org/10.1063/5.0247384

Abstract

View articletitled, Vortex rectification stages with low hydraulic resistance

Open the PDF for in another window

Use of heavy traffic and reduction of intertrain interval to form a network of alternative railway routes along the North-South transport corridor

Evgeniia Chebotareva; Ekaterina Ryazanova; Sabir Nauruzbaev

AIP Conf. Proc. 3243, 020039 (2024) https://doi.org/10.1063/5.0247337

Abstract

View articletitled, Use of heavy traffic and reduction of intertrain interval to form a network of alternative railway routes along the North-South transport corridor

Open the PDF for in another window

Manufacturing technology of a part with a cellular structure made of bimetallic composite ER70S-6-ER309LSI by the WAAM method

Dmitry Shatagin; Maxim Zhelonkin; Natalya Klochkova; Andrey Bashkov; Alexey Davydov

AIP Conf. Proc. 3243, 020040 (2024) https://doi.org/10.1063/5.0247354

Abstract

View articletitled, Manufacturing technology of a part with a cellular structure made of bimetallic composite ER70S-6-ER309LSI by the WAAM method

Open the PDF for in another window

Electrochemical recovery of lithium hydroxide in the production of synthetic fibers and polymers

Alfiya Oserbaeva; Rashid Kurbaniyazov; Ilkhom Rakhmanov; Djonon Alimdjanova; Shokirjon Abdusattarov; Sirojiddin Shamatov

AIP Conf. Proc. 3243, 020041 (2024) https://doi.org/10.1063/5.0247280

Abstract

View articletitled, Electrochemical recovery of lithium hydroxide in the production of synthetic fibers and polymers

Open the PDF for in another window

Physico-chemical properties of polypropylene modification

Nayima Bazarova; Gavhar Karimova; Erkin Turaev; Javlon Asomov; Azizbek Ergashov; Asadjon Kambarov

AIP Conf. Proc. 3243, 020042 (2024) https://doi.org/10.1063/5.0247277

Abstract

View articletitled, Physico-chemical properties of polypropylene modification

Open the PDF for in another window

Analyzing the influence of technological parameters on desulfurization of sintering charges

Sergey Nezamaev; Vladimir Bobkov; Daria Shutova; Vladimir Orekhov

AIP Conf. Proc. 3243, 020043 (2024) https://doi.org/10.1063/5.0247284

Abstract

View articletitled, Analyzing the influence of technological parameters on desulfurization of sintering charges

Open the PDF for in another window

Method for calculating the nonlinear characteristics of sealing gaskets by interpolation on parametric Bezier surfaces

Vladimir Volgin; Pavel Kalish; Artem Malakho

AIP Conf. Proc. 3243, 020044 (2024) https://doi.org/10.1063/5.0247272

Abstract

View articletitled, Method for calculating the nonlinear characteristics of sealing gaskets by interpolation on parametric Bezier surfaces

Open the PDF for in another window

Influence of thermoelectric characteristics of high-speed steels on their tribotechnical properties

Evgeniy Fominov; Elena Fisunova; Victoria Kurochkina

AIP Conf. Proc. 3243, 020045 (2024) https://doi.org/10.1063/5.0247447

Abstract

View articletitled, Influence of thermoelectric characteristics of high-speed steels on their tribotechnical properties

Open the PDF for in another window

Changing the characteristics of cement stone with the calcium stearate additive under the influence of fungal microorganisms

Varvara Rumyantseva; Viktoriya Konovalova; Boris Narmaniya; Konstantin Strokin; Aleksey Gal`tsev

AIP Conf. Proc. 3243, 020046 (2024) https://doi.org/10.1063/5.0247348

Abstract

View articletitled, Changing the characteristics of cement stone with the calcium stearate additive under the influence of fungal microorganisms

Open the PDF for in another window

Designing Grover’s quantum searching algorithm for 2-qubit and 3-qubit states of quantum systems

Sh. A. Toirov; U. X. Mingboyev; A. A. Parmonov; R. B. Kudratov

AIP Conf. Proc. 3243, 020047 (2024) https://doi.org/10.1063/5.0247564

Abstract

View articletitled, Designing Grover’s quantum searching algorithm for 2-qubit and 3-qubit states of quantum systems

Open the PDF for in another window

Influence of technological factors on magnesia-ash binder’s hardening and operational resistance

Olga Miryuk

AIP Conf. Proc. 3243, 020048 (2024) https://doi.org/10.1063/5.0247273

Abstract

View articletitled, Influence of technological factors on magnesia-ash binder’s hardening and operational resistance

Open the PDF for in another window

Behavior of wood during photo-oxidation

Artem Girfanov; Ruslan Safin

AIP Conf. Proc. 3243, 020049 (2024) https://doi.org/10.1063/5.0247470

Abstract

View articletitled, Behavior of wood during photo-oxidation

Open the PDF for in another window

Study of localized plasticity bands in rolled steel sheets via speckle photography

Svetlana A. Barannikova; Polina V. Iskhakova

AIP Conf. Proc. 3243, 020050 (2024) https://doi.org/10.1063/5.0247295

Abstract

View articletitled, Study of localized plasticity bands in rolled steel sheets via speckle photography

Open the PDF for in another window

Assessment of tribological indicators of the turning process vessel steel 20 MnMoNi 5-5

Evgeniy Fominov; Elena Fisunova; Tatiana Lavrenova; Victoria Kurochkina

AIP Conf. Proc. 3243, 020051 (2024) https://doi.org/10.1063/5.0247444

Abstract

View articletitled, Assessment of tribological indicators of the turning process vessel steel 20 MnMoNi 5-5

Open the PDF for in another window

Internal normal stress during uniaxial compression of dough in the process of forming flat blanks by stamping

U. T. Safarov; A. M. Nurmukhamedov; S. O. Kazakova; A. Yu. Khudayberdiev

AIP Conf. Proc. 3243, 020052 (2024) https://doi.org/10.1063/5.0247668

Abstract

View articletitled, Internal normal stress during uniaxial compression of dough in the process of forming flat blanks by stamping

Open the PDF for in another window

Mathematical modeling and numerical investigation of thermal heating of a composite under microwave radiation

Dmitry Kondratov; Marina Barulina; Nikolay Bekrenev; Irina Zlobina; Ivan Ulitin

AIP Conf. Proc. 3243, 020053 (2024) https://doi.org/10.1063/5.0247312

Abstract

View articletitled, Mathematical modeling and numerical investigation of thermal heating of a composite under microwave radiation

Open the PDF for in another window

Principles of constructing a mathematical model of microwave heating of multilayer composite

Dmitry Kondratov; Marina Barulina; Nikolay Bekrenev; Irina Zlobina; Ivan Ulitin

AIP Conf. Proc. 3243, 020054 (2024) https://doi.org/10.1063/5.0247314

Abstract

View articletitled, Principles of constructing a mathematical model of microwave heating of multilayer composite

Open the PDF for in another window

Effect of rice husk biochar additive on concrete properties

Roza Narmanova; Indira Yespanova; Saken Kanzhar; Lena Yusupova; Nurlan Abildaev

AIP Conf. Proc. 3243, 020055 (2024) https://doi.org/10.1063/5.0247632

Abstract

View articletitled, Effect of rice husk biochar additive on concrete properties

Open the PDF for in another window

Investigation of the properties of plywood made from wood veneer that has undergone two-stage processing

Ksenia Saerova; Ruslan Safin; Shamil Mukhametzyanov

AIP Conf. Proc. 3243, 020056 (2024) https://doi.org/10.1063/5.0247306

Abstract

View articletitled, Investigation of the properties of plywood made from wood veneer that has undergone two-stage processing

Open the PDF for in another window

Increasing the durability in the context of green construction in regions with Arctic and Alpine climate

Ekaterina Potapova; Ivan Korchunov; Dmitriy Mikhailidi; Victor Rudomazin

AIP Conf. Proc. 3243, 020057 (2024) https://doi.org/10.1063/5.0247505

Abstract

View articletitled, Increasing the durability in the context of green construction in regions with Arctic and Alpine climate

Open the PDF for in another window

Simulation of the operation of electric power storage systems on single-track sections of electric railways

Vladislav Nezevak

AIP Conf. Proc. 3243, 020058 (2024) https://doi.org/10.1063/5.0247457

Abstract

View articletitled, Simulation of the operation of electric power storage systems on single-track sections of electric railways

Open the PDF for in another window

Influence of the gases enthalpy in the diesel engine exhaust manifold on the boost pressure

Andrey Malozemov; Dmitry Kozminykh; Kirill Gundarev; Georgiy Malozemov

AIP Conf. Proc. 3243, 020059 (2024) https://doi.org/10.1063/5.0247495

Abstract

View articletitled, Influence of the gases enthalpy in the diesel engine exhaust manifold on the boost pressure

Open the PDF for in another window

Analysis of physicochemical processes for sulfur removal during ore raw material sintering

Sergey Nezamaev; Vladimir Bobkov; Daria Shutova; Vladimir Orekhov

AIP Conf. Proc. 3243, 020060 (2024) https://doi.org/10.1063/5.0247282

Abstract

View articletitled, Analysis of physicochemical processes for sulfur removal during ore raw material sintering

Open the PDF for in another window

Secondary technogenic materials for dense concrete packaging

Mikhail Abramov; Svetlana Samchenko; Artem Osmanov

AIP Conf. Proc. 3243, 020061 (2024) https://doi.org/10.1063/5.0247438

Abstract

View articletitled, Secondary technogenic materials for dense concrete packaging

Open the PDF for in another window

Thermal post-treatment of FDM-printing ABS-plastic specimens in a vacuum bag

Andrey A. Potapov; Artem P. Malakho; Inna V. Gnidina

AIP Conf. Proc. 3243, 020062 (2024) https://doi.org/10.1063/5.0247449

Abstract

View articletitled, Thermal post-treatment of FDM-printing ABS-plastic specimens in a vacuum bag

Open the PDF for in another window

Phase composition of diffusion layers in iron and steel after nitriding in thermo-cyclic mode

Larisa Petrova; Irina Belashova; Mikhail Frolov

AIP Conf. Proc. 3243, 020063 (2024) https://doi.org/10.1063/5.0247464

Abstract

View articletitled, Phase composition of diffusion layers in iron and steel after nitriding in thermo-cyclic mode

Open the PDF for in another window

Effect of nitriding on toughness and cold brittleness of alloyed steels

Larisa Petrova; Irina Belashova; Mikhail Frolov; Petr Bibikov

AIP Conf. Proc. 3243, 020064 (2024) https://doi.org/10.1063/5.0247468

Abstract

View articletitled, Effect of nitriding on toughness and cold brittleness of alloyed steels

Open the PDF for in another window

The calculation and selection of high-nitrogen-containing HEAs systems

Ekaterina Volokitina; Artem Kim; Ludmila Razumova; Anatoliy Popovich

AIP Conf. Proc. 3243, 020065 (2024) https://doi.org/10.1063/5.0247458

Abstract

View articletitled, The calculation and selection of high-nitrogen-containing HEAs systems

Open the PDF for in another window

Influence of electrical conductivity of polluted waters on the efficiency of photocatalytic oxidation of organic dyes

Aleksey Zaitsev

AIP Conf. Proc. 3243, 020066 (2024) https://doi.org/10.1063/5.0247368

Abstract

View articletitled, Influence of electrical conductivity of polluted waters on the efficiency of photocatalytic oxidation of organic dyes

Open the PDF for in another window

Physical and chemical properties of calcium nitrate solution – A by-product of nitric acid processing of mineralized phosphatides

Mukhsina Umaraliyeva; Zulfikahar Dehkanov; Mukhayyo Khoshimkhanova; Khayrullakhan Aripov; Ismoiljon G’anijonov

AIP Conf. Proc. 3243, 020067 (2024) https://doi.org/10.1063/5.0247398

Abstract

View articletitled, Physical and chemical properties of calcium nitrate solution – A by-product of nitric acid processing of mineralized phosphatides

Open the PDF for in another window

Oxidizing effect of non-thermal Argon microwave plasma depending on time, distance from the source and gas flow rate

Vladimir Kharlamov; Ibragim Medzhidov; Daria Basyrova; Pavel Tsygvintsev; Sergey Gorbatov; Daria Petrukhina; Nikolay Glushchenko

AIP Conf. Proc. 3243, 020068 (2024) https://doi.org/10.1063/5.0247639

Abstract

View articletitled, Oxidizing effect of non-thermal Argon microwave plasma depending on time, distance from the source and gas flow rate

Open the PDF for in another window

Surface treatment of FDM printing samples

Ivan S. Govorov; Pavel N. Osipov; Inna V. Gnidina; Artem P. Malakho

AIP Conf. Proc. 3243, 020069 (2024) https://doi.org/10.1063/5.0247446

Abstract

View articletitled, Surface treatment of FDM printing samples

Open the PDF for in another window

Suggestions for describing the kinetics of autogenous shrinkage of concrete in the early hardening period

Ta Van Phan; G. V. Nesvetaev; Yu. I. Koryanova

AIP Conf. Proc. 3243, 020070 (2024) https://doi.org/10.1063/5.0247355

Abstract

View articletitled, Suggestions for describing the kinetics of autogenous shrinkage of concrete in the early hardening period

Open the PDF for in another window

Methods for evaluating surface characteristics using a non-destructive method based on the skin effect

Tarek Abu Fadda; Alexandra Remsheva; Gregory Afimiyn; Andrey Karnaukhov; Sergey Voinash; Ramil Zagidullin; Adel Yakushev

AIP Conf. Proc. 3243, 020071 (2024) https://doi.org/10.1063/5.0247538

Abstract

View articletitled, Methods for evaluating surface characteristics using a non-destructive method based on the skin effect

Open the PDF for in another window

Workability and microgeometry of nitride oxide diffusion coating on structural steels

Kholikul Eshkabilov

AIP Conf. Proc. 3243, 020072 (2024) https://doi.org/10.1063/5.0247629

Abstract

View articletitled, Workability and microgeometry of nitride oxide diffusion coating on structural steels

Open the PDF for in another window

Development of metal-polymer paste for extrusion-type 3D-printing of Co₃₇Ni₃₆Al₂₇ products

Alina Mazeeva; Gleb Konov; Elizaveta Vasilieva; Marina Baykova; Dmitriy Masaylo

AIP Conf. Proc. 3243, 020073 (2024) https://doi.org/10.1063/5.0247260

Abstract

View articletitled, Development of metal-polymer paste for extrusion-type 3D-printing of Co37Ni36Al27 products

Open the PDF for in another window

Die tooling hardening technological process development aiming to tool life increase

Aleksandr Vladimirov; Vitalii Sklyar; Amankeldy Akhmetov; Aleksandr Kudryashov; Anna Titova

AIP Conf. Proc. 3243, 020074 (2024) https://doi.org/10.1063/5.0247517

Abstract

View articletitled, Die tooling hardening technological process development aiming to tool life increase

Open the PDF for in another window

Effect of die geometry on fiber impregnation in pultrusion process

Irina Fomicheva; Artem Malakho; Vladimir Volgin

AIP Conf. Proc. 3243, 020075 (2024) https://doi.org/10.1063/5.0247429

Abstract

View articletitled, Effect of die geometry on fiber impregnation in pultrusion process

Open the PDF for in another window

Optimization of the layered airfoil design

Vladislav Krasilnikov

AIP Conf. Proc. 3243, 020076 (2024) https://doi.org/10.1063/5.0247293

Abstract

View articletitled, Optimization of the layered airfoil design

Open the PDF for in another window

Implementation of composite shell finite elements for modeling surface hardened tooth gear

Maria Alekseeva; Mark Kuzmin; Aleksandr Tamm

AIP Conf. Proc. 3243, 020077 (2024) https://doi.org/10.1063/5.0247261

Abstract

View articletitled, Implementation of composite shell finite elements for modeling surface hardened tooth gear

Open the PDF for in another window

Scientific and technical justification for the development of the optimal value of transmitted active power in high-voltage transmission lines

Merdan Akmuhammedov; Aman Hojaliyev; Arslan Janmyradov; Eziz Torumov; Kerven Berdiliyev

AIP Conf. Proc. 3243, 020078 (2024) https://doi.org/10.1063/5.0247262

Abstract

View articletitled, Scientific and technical justification for the development of the optimal value of transmitted active power in high-voltage transmission lines

Open the PDF for in another window

Invariance of the laws of projective transformations of specific parameters for an ideal one-component gas

Aleksandr Ivanovich Kanareykin

AIP Conf. Proc. 3243, 020079 (2024) https://doi.org/10.1063/5.0247300

Abstract

View articletitled, Invariance of the laws of projective transformations of specific parameters for an ideal one-component gas

Open the PDF for in another window

Application of titanium based getter alloys for hydrogen storage in transport systems

Vsevolod Malkov; Larisa Petrova; Artem Kosachev

AIP Conf. Proc. 3243, 020080 (2024) https://doi.org/10.1063/5.0247469

Abstract

View articletitled, Application of titanium based getter alloys for hydrogen storage in transport systems

Open the PDF for in another window

Evaluation of weakened areas to determine actual rock properties

Daulet Takhanov; Merey Balpanova; Aigul Kenetayeva; Muhammedrakhim Rabatuly; Gulnazira Shaikhova; Sheishenaly Usupayev

AIP Conf. Proc. 3243, 020081 (2024) https://doi.org/10.1063/5.0248142

Abstract

View articletitled, Evaluation of weakened areas to determine actual rock properties

Open the PDF for in another window

Internal friction during oscillations of rectilinear screw dislocation in dissipative medium, taking into account interaction with point defects

Viktor V. Dezhin

AIP Conf. Proc. 3243, 020082 (2024) https://doi.org/10.1063/5.0247344

Abstract

View articletitled, Internal friction during oscillations of rectilinear screw dislocation in dissipative medium, taking into account interaction with point defects

Open the PDF for in another window

Implementation of a system for monitoring and managing traffic safety at railway crossings

Bobomurod Rakhmonov; Natalya Yaronova; Janibek Kurbanov

AIP Conf. Proc. 3243, 020083 (2024) https://doi.org/10.1063/5.0247320

Abstract

View articletitled, Implementation of a system for monitoring and managing traffic safety at railway crossings

Open the PDF for in another window

Assessing the quality of speech transmission using the e-model

Orifjon Mirsagdiev; Natalya Yaronova; Oybek Achilov

AIP Conf. Proc. 3243, 020084 (2024) https://doi.org/10.1063/5.0247328

Abstract

View articletitled, Assessing the quality of speech transmission using the e-model

Open the PDF for in another window

Production of stable red phosphorus in industry

Noila Kuchkarova; Alexey Nimchik; Madraim Sarikulov; Zilola Pattayeva; Gulzoda Khudoyberdieva; Samarbek Eronov; Sevinch Darkhanova; Anjana Anandan Vannathan

AIP Conf. Proc. 3243, 020085 (2024) https://doi.org/10.1063/5.0247387

Abstract

View articletitled, Production of stable red phosphorus in industry

Open the PDF for in another window

Corrosion studies of martensitic alloy in different microstructural states by the gravimetry

Anna Churakova

AIP Conf. Proc. 3243, 020086 (2024) https://doi.org/10.1063/5.0248191

Abstract

View articletitled, Corrosion studies of martensitic alloy in different microstructural states by the gravimetry

Open the PDF for in another window

Recognition of slightly blurred images of planets by a convolutional neural network

Dina Tuliabaeva; Dmitrii Tumakov; Anton Egorchev

AIP Conf. Proc. 3243, 020087 (2024) https://doi.org/10.1063/5.0247350

Abstract

View articletitled, Recognition of slightly blurred images of planets by a convolutional neural network

Open the PDF for in another window

Study of the process of radical polymerization of 6-bromine boma and the effect of initiator concentration and characteristic viscosity on polymer solutions

Khusen Mustafoyev; Boboxon Mavlonov; Ilkhom Sharipov; Bakhmal Komilova

AIP Conf. Proc. 3243, 020088 (2024) https://doi.org/10.1063/5.0247279

Abstract

View articletitled, Study of the process of radical polymerization of 6-bromine boma and the effect of initiator concentration and characteristic viscosity on polymer solutions

Open the PDF for in another window

Research on the influence of completeness of hydrogen-oxygen mixture combustion on the safety of the hydrogen energy complex equipment at nuclear power plants

Aleksandr Egorov; Valeriy Yurin; Daniil Makarov

AIP Conf. Proc. 3243, 020089 (2024) https://doi.org/10.1063/5.0247442

Abstract

View articletitled, Research on the influence of completeness of hydrogen-oxygen mixture combustion on the safety of the hydrogen energy complex equipment at nuclear power plants

Open the PDF for in another window

Features of unsteady gas-dynamic and heat exchange processes in the exhaust manifold of a Piston engine

Leonid Plotnikov; Nikita Grigoriev; Konstantin Desyatov; Leonid Osipov; Alexander Parfenov

AIP Conf. Proc. 3243, 020090 (2024) https://doi.org/10.1063/5.0247249

Abstract

View articletitled, Features of unsteady gas-dynamic and heat exchange processes in the exhaust manifold of a Piston engine

Open the PDF for in another window

Development of property research models conductive polymer nanocomposites, nanotubes, graphenes and fullerenes

Oleg Chernov

AIP Conf. Proc. 3243, 020091 (2024) https://doi.org/10.1063/5.0247335

Abstract

View articletitled, Development of property research models conductive polymer nanocomposites, nanotubes, graphenes and fullerenes

Open the PDF for in another window

The influence of humidity and temperature factors on the formation of the concrete structure

Askar Aimenov; Dzhambul Aimenov; Linar Sabitov; Sergey Voinash; Alexandra Orekhovskaya; Ramil Zagidullin; Ilgam Kiyamov

AIP Conf. Proc. 3243, 020092 (2024) https://doi.org/10.1063/5.0247250

Abstract

View articletitled, The influence of humidity and temperature factors on the formation of the concrete structure

Open the PDF for in another window

Comprehensive algorithm for evaluating the reliability of oil recovery forecasting models for deposits in the ural-volga region

Vyacheslav Sh. Mukhametshin; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020093 (2024) https://doi.org/10.1063/5.0247708

Abstract

View articletitled, Comprehensive algorithm for evaluating the reliability of oil recovery forecasting models for deposits in the ural-volga region

Open the PDF for in another window

Increasing the efficiency of Drilling geological exploration wells with air cleaning

Khasan Iriskulov; Rustam Djurayev

AIP Conf. Proc. 3243, 020094 (2024) https://doi.org/10.1063/5.0249501

Abstract

View articletitled, Increasing the efficiency of Drilling geological exploration wells with air cleaning

Open the PDF for in another window

Research of gap sealing in hydraulic units

Grigory Nesterenko; Irina Nesterenko; Evgeny Lysenko; Andrey Karnaukhov; Gulnar Sibagatova; Svetlana Kenzhegaliyeva; Ramil Zagidullin

AIP Conf. Proc. 3243, 020095 (2024) https://doi.org/10.1063/5.0247263

Abstract

View articletitled, Research of gap sealing in hydraulic units

Open the PDF for in another window

Methodology for calculating the absorbing panel of a film solar collector based on strength conditions

Shakhzoda Sultanova; Yusuf Rashidov

AIP Conf. Proc. 3243, 020096 (2024) https://doi.org/10.1063/5.0247491

Abstract

View articletitled, Methodology for calculating the absorbing panel of a film solar collector based on strength conditions

Open the PDF for in another window

Methodology of calculation of the absorbing panel of a solar film collector from the conditions of thermal efficiency

Yusuf Rashidov; Shakhzoda Sultanova

AIP Conf. Proc. 3243, 020097 (2024) https://doi.org/10.1063/5.0247493

Abstract

View articletitled, Methodology of calculation of the absorbing panel of a solar film collector from the conditions of thermal efficiency

Open the PDF for in another window

Study of photo- and thermal stabilization of (co) polymers based on 6-bromo-benzoxazolonyl methyl methacrylate, acrylamide, and methyl methacrylate

Ikrom Choriev; Khusen Mustafoev; Sitorabonu Murodova; Bobokhon Mavlonov

AIP Conf. Proc. 3243, 020098 (2024) https://doi.org/10.1063/5.0247285

Abstract

View articletitled, Study of photo- and thermal stabilization of (co) polymers based on 6-bromo-benzoxazolonyl methyl methacrylate, acrylamide, and methyl methacrylate

Open the PDF for in another window

Scientific and technical justification for compiling a wind energy cadastre for the regions of Turkmenistan (using the example of the city of Dashoguz)

Nurmuhammet Allanazarov; Tirkesh Jumadurdyyev; Yslamberdi Tyllanurov; Komek Komekov; Shatlyk Akmyradov

AIP Conf. Proc. 3243, 020099 (2024) https://doi.org/10.1063/5.0247763

Abstract

View articletitled, Scientific and technical justification for compiling a wind energy cadastre for the regions of Turkmenistan (using the example of the city of Dashoguz)

Open the PDF for in another window

Application prospects high-temperature brick finishing

Julia Shchepochkina; Sergey Voinash; Linar Sabitov; Ilgam Kiyamov; Ramil Zagidullin; Viktoriia Sokolova

AIP Conf. Proc. 3243, 020100 (2024) https://doi.org/10.1063/5.0247499

Abstract

View articletitled, Application prospects high-temperature brick finishing

Open the PDF for in another window

Dissociation of SF₆ hydrate at different air flow rates

N. V. Marasanov

AIP Conf. Proc. 3243, 020101 (2024) https://doi.org/10.1063/5.0247507

Abstract

View articletitled, Dissociation of SF6 hydrate at different air flow rates

Open the PDF for in another window

Dissociation of SF₆ hydrate synthesized in an aqueous salt solution at different air flow rates

N. V. Marasanov; E. E. Shemeleva; V. A. Knyazkov

AIP Conf. Proc. 3243, 020102 (2024) https://doi.org/10.1063/5.0247508

Abstract

View articletitled, Dissociation of SF6 hydrate synthesized in an aqueous salt solution at different air flow rates

Open the PDF for in another window

Advanced technology and equipment for finishing cylinder block liners of internal combustion engines

Alexander Andilakhai; Vladimir Andilakhai; Ilya Chekurov

AIP Conf. Proc. 3243, 020103 (2024) https://doi.org/10.1063/5.0247650

Abstract

View articletitled, Advanced technology and equipment for finishing cylinder block liners of internal combustion engines

Open the PDF for in another window

Additive manufacturing aluminum-oxide ceramics: A microstructural characterization study

Maxim Korobenkov; Anton Narikovich; Ivan Lyatun; Vladimir Promakhov

AIP Conf. Proc. 3243, 020104 (2024) https://doi.org/10.1063/5.0247467

Abstract

View articletitled, Additive manufacturing aluminum-oxide ceramics: A microstructural characterization study

Open the PDF for in another window

Development of a block diagram of the final link for the KUKA KR AGILUS robotic arm

S. S. Akimov

AIP Conf. Proc. 3243, 020105 (2024) https://doi.org/10.1063/5.0247326

Abstract

View articletitled, Development of a block diagram of the final link for the KUKA KR AGILUS robotic arm

Open the PDF for in another window

Marine motor oils refractometry

Irina Korneva; Nikolay Sinyavsky; Natalia Kostrikova

AIP Conf. Proc. 3243, 020106 (2024) https://doi.org/10.1063/5.0247383

Abstract

View articletitled, Marine motor oils refractometry

Open the PDF for in another window

To the cellular automata modeling of liquid percolation in a porous medium

Sergey Rubtsov; Alla Pavlova; Ilya Telyatnikov

AIP Conf. Proc. 3243, 020107 (2024) https://doi.org/10.1063/5.0247278

Abstract

View articletitled, To the cellular automata modeling of liquid percolation in a porous medium

Open the PDF for in another window

Evaluation of the resistance of reversing switches to salt fog

Nikolay Limarenko; Dmitriy Savenkov; Alexey Shcherbakov; Dmitriy Gladckih

AIP Conf. Proc. 3243, 020108 (2024) https://doi.org/10.1063/5.0247440

Abstract

View articletitled, Evaluation of the resistance of reversing switches to salt fog

Open the PDF for in another window

He and H bottom hypernuclei with two lamda bottom hyperons

E. Matskevich

AIP Conf. Proc. 3243, 020109 (2024) https://doi.org/10.1063/5.0247414

Abstract

View articletitled, He and H bottom hypernuclei with two lamda bottom hyperons

Open the PDF for in another window

Technology for developing oil and gas fields with low permeability reservoirs on the basis of geomechanical treatment and non-intensive multi-stage mini-hydraulic fracturing

Dmitry Klimov

AIP Conf. Proc. 3243, 020110 (2024) https://doi.org/10.1063/5.0247332

Abstract

View articletitled, Technology for developing oil and gas fields with low permeability reservoirs on the basis of geomechanical treatment and non-intensive multi-stage mini-hydraulic fracturing

Open the PDF for in another window

The method of assembly an equal number of parts of eponymous intermediate and extreme dimensional groups

Nadezhda Chigrik

AIP Conf. Proc. 3243, 020111 (2024) https://doi.org/10.1063/5.0247484

Abstract

View articletitled, The method of assembly an equal number of parts of eponymous intermediate and extreme dimensional groups

Open the PDF for in another window

Automation of technical and technological processes and modern digital technologies for assessing the success of discovering a field

D. T. Mukhamedieva; L. U. Safarova

AIP Conf. Proc. 3243, 020112 (2024) https://doi.org/10.1063/5.0248019

Abstract

View articletitled, Automation of technical and technological processes and modern digital technologies for assessing the success of discovering a field

Open the PDF for in another window

The application of electronic tachymeters in the measurement of errors in angular and non-linear modes

Shukhrat Tukhtamishev; Anvar Mirzayev; Olim Urokov; Dinora Hamdamova

AIP Conf. Proc. 3243, 020113 (2024) https://doi.org/10.1063/5.0247837

Abstract

View articletitled, The application of electronic tachymeters in the measurement of errors in angular and non-linear modes

Open the PDF for in another window

Method for calculation of a combined dryer

Kh. Nuriddinov; A. A. Juraev; J. U. Ruzikulov; T. F. Murodov; Sh. N. Safarov

AIP Conf. Proc. 3243, 020114 (2024) https://doi.org/10.1063/5.0249813

Abstract

View articletitled, Method for calculation of a combined dryer

Open the PDF for in another window

Modeling thermal phenomena of shallow ribbon foundations with an insulated cover

Anastasia Soboleva; Sergey Dolmatov; Sergey Voinash; Linar Sabitov; Ilgam Kiyamov; Leisan Kiiamova

AIP Conf. Proc. 3243, 020115 (2024) https://doi.org/10.1063/5.0247276

Abstract

View articletitled, Modeling thermal phenomena of shallow ribbon foundations with an insulated cover

Open the PDF for in another window

Efficiency in using geothermal energy sources in the heat supply system

Sh. Y. Samatova; M. T. Abdirova; Z. O. Boikhonov; Sh. G. Hamrayev

AIP Conf. Proc. 3243, 020116 (2024) https://doi.org/10.1063/5.0248297

Abstract

View articletitled, Efficiency in using geothermal energy sources in the heat supply system

Open the PDF for in another window

Technological aspects of the effective operation of wells of a complicated fund

Nurfayaz Gabdrakhmanov; Elvira Almukhametova; Alexander Gutorov; Arina Maximova; Ranil Rafikov; Alexander Smagin

AIP Conf. Proc. 3243, 020117 (2024) https://doi.org/10.1063/5.0247780

Abstract

View articletitled, Technological aspects of the effective operation of wells of a complicated fund

Open the PDF for in another window

Mathematical modeling of thermal effects on hard-to-recover oil reserves using horizontal well systems

Alina Gizzatullina; Lyubov Kuleshova; Ilgizar Khakimzyanov; Timur Minnivaleev; Gulnaz Garifullina; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020118 (2024) https://doi.org/10.1063/5.0247784

Abstract

View articletitled, Mathematical modeling of thermal effects on hard-to-recover oil reserves using horizontal well systems

Open the PDF for in another window

Technical features of the selection of temperature sensors and their calibration

Oleg Filimonov; Irida Galiullina; Yana Musina; Alan Kudoyarov; Eduard Mukhamadeev

AIP Conf. Proc. 3243, 020119 (2024) https://doi.org/10.1063/5.0247774

Abstract

View articletitled, Technical features of the selection of temperature sensors and their calibration

Open the PDF for in another window

Use of numerical methods to solve the problem of fluid filtration under the action of various forces in a porous medium in the implementation of thermal impact technology on the formation

Alina Gizzatullina; Lyubov Kuleshova; Timur Minnivaleev; Gulnaz Garifullina; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020120 (2024) https://doi.org/10.1063/5.0247785

Abstract

View articletitled, Use of numerical methods to solve the problem of fluid filtration under the action of various forces in a porous medium in the implementation of thermal impact technology on the formation

Open the PDF for in another window

Theoretical model for describing the process of heating a productive reservoir using the technology of paired horizontal wells

Alina Gizzatullina; Lyubov Kuleshova; Rustem Suleimanov; Timur Minnivaleev; Ruslan Gilyazetdinov; Lilia Gimaeva

AIP Conf. Proc. 3243, 020121 (2024) https://doi.org/10.1063/5.0247767

Abstract

View articletitled, Theoretical model for describing the process of heating a productive reservoir using the technology of paired horizontal wells

Open the PDF for in another window

Modeling the dependence of the radius and tortuosity of the pore channels of terrigenous reservoirs in Western Siberia to improve the efficiency of oil extraction technologies

Rasul Akhmetov; Lyubov Kuleshova; Maksim Mikhailov

AIP Conf. Proc. 3243, 020122 (2024) https://doi.org/10.1063/5.0247803

Abstract

View articletitled, Modeling the dependence of the radius and tortuosity of the pore channels of terrigenous reservoirs in Western Siberia to improve the efficiency of oil extraction technologies

Open the PDF for in another window

Investigation of the geological conditions of the occurrence of operational facilities during the extraction of reservoir fluids

Marat Khabibullin; Rustem Suleimanov; Arsen Khabibullin

AIP Conf. Proc. 3243, 020123 (2024) https://doi.org/10.1063/5.0247765

Abstract

View articletitled, Investigation of the geological conditions of the occurrence of operational facilities during the extraction of reservoir fluids

Open the PDF for in another window

Two-stage electromagnetic acoustic heating of an oil reservoir taking into account thermal diffusion

Gulnara Izmailova

AIP Conf. Proc. 3243, 020124 (2024) https://doi.org/10.1063/5.0247789

Abstract

View articletitled, Two-stage electromagnetic acoustic heating of an oil reservoir taking into account thermal diffusion

Open the PDF for in another window

Selection of the failure criterion of pumping units based on the results of measurement of vibration spectra (frequency response)

Rais Suleymanov

AIP Conf. Proc. 3243, 020125 (2024) https://doi.org/10.1063/5.0247772

Abstract

View articletitled, Selection of the failure criterion of pumping units based on the results of measurement of vibration spectra (frequency response)

Open the PDF for in another window

Technology of oil production intensification

Gulnaz Garifullina; Alexander Malov; Aigul Khasanova; Vladimir Imaev

AIP Conf. Proc. 3243, 020126 (2024) https://doi.org/10.1063/5.0247792

Abstract

View articletitled, Technology of oil production intensification

Open the PDF for in another window

Comprehensive analysis of the results of the application of hydraulic fracturing techniques and technologies in the fields of Western Siberia

Regina Sharifullina; Elmira Sadykova; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020127 (2024) https://doi.org/10.1063/5.0247802

Abstract

View articletitled, Comprehensive analysis of the results of the application of hydraulic fracturing techniques and technologies in the fields of Western Siberia

Open the PDF for in another window

Use of scientific and methodological foundations of a comprehensive analysis of geological and field data for the development of measures to increase well productivity with advanced technologies

Faniya Ikhsanova; Farit Sharipov; Elizaveta Voblikova; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020128 (2024) https://doi.org/10.1063/5.0247707

Abstract

View articletitled, Use of scientific and methodological foundations of a comprehensive analysis of geological and field data for the development of measures to increase well productivity with advanced technologies

Open the PDF for in another window

Assessment of the influence of geological and technological parameters of the Tournaisian layer deposits on the oil recovery process

Lyubov Kuleshova; Vyacheslav V. Mukhametshin; Ruslan Gilyazetdinov

AIP Conf. Proc. 3243, 020129 (2024) https://doi.org/10.1063/5.0247713

Abstract

View articletitled, Assessment of the influence of geological and technological parameters of the Tournaisian layer deposits on the oil recovery process

Open the PDF for in another window

On the effect of the well grid density on the efficiency of the technology for the implementation of oil extraction from the verey horizon deposits in carbonate reservoirs

Lyubov Kuleshova

AIP Conf. Proc. 3243, 020130 (2024) https://doi.org/10.1063/5.0247718

Abstract

View articletitled, On the effect of the well grid density on the efficiency of the technology for the implementation of oil extraction from the verey horizon deposits in carbonate reservoirs

Open the PDF for in another window

Method of calculating the mass flow rate of crude oil and the volume flow rate of free gas during measurements according to the technological scheme with an individual flow meter

Oksana Davydova

AIP Conf. Proc. 3243, 020131 (2024) https://doi.org/10.1063/5.0247771

Abstract

View articletitled, Method of calculating the mass flow rate of crude oil and the volume flow rate of free gas during measurements according to the technological scheme with an individual flow meter

Open the PDF for in another window

Use of thermal effects on the reservoir to increase oil recovery with modern technologies

Alina Gizzatullina; Gulnaz Garifullina; Vladimir Imaev

AIP Conf. Proc. 3243, 020132 (2024) https://doi.org/10.1063/5.0247793

Abstract

View articletitled, Use of thermal effects on the reservoir to increase oil recovery with modern technologies

Open the PDF for in another window

Comparative assessment of fatigue and corrosion-fatigue durability of oil trunk pipelines using physical modeling systems

Gulnaz Garifullina; Rafael Azigamov; Aigul Khasanova

AIP Conf. Proc. 3243, 020133 (2024) https://doi.org/10.1063/5.0247790

Abstract

View articletitled, Comparative assessment of fatigue and corrosion-fatigue durability of oil trunk pipelines using physical modeling systems

Open the PDF for in another window

Assessment of the effectiveness of oil production technology

Liliya Yusupova; Regina Khusnutdinova; Bulat Zelyaev

AIP Conf. Proc. 3243, 020134 (2024) https://doi.org/10.1063/5.0247796

Abstract

View articletitled, Assessment of the effectiveness of oil production technology

Open the PDF for in another window

Problems of using technologies for enhanced oil recovery

Liliya Yusupova; Regina Khusnutdinova; Bulat Zelyaev

AIP Conf. Proc. 3243, 020135 (2024) https://doi.org/10.1063/5.0247797

Abstract

View articletitled, Problems of using technologies for enhanced oil recovery

Open the PDF for in another window

Use of integral calculus to solve problems in the implementation of technologies for the development of hard-to-recover oil reserves

Flura Usmanova; Polina Mitichkina

AIP Conf. Proc. 3243, 020136 (2024) https://doi.org/10.1063/5.0247794

Abstract

View articletitled, Use of integral calculus to solve problems in the implementation of technologies for the development of hard-to-recover oil reserves

Open the PDF for in another window

Systematic approach to the selection of facilities for multistage hydraulic fracturing technology in the conditions of multi-layer deposits in Western Siberia

Eugenia Voronova; Larisa Petrova

AIP Conf. Proc. 3243, 020137 (2024) https://doi.org/10.1063/5.0247801

Abstract

View articletitled, Systematic approach to the selection of facilities for multistage hydraulic fracturing technology in the conditions of multi-layer deposits in Western Siberia

Open the PDF for in another window

Sign up for alerts

RSS

Current Issue RSS Feed

Open Issues RSS Feed

Most Read
Most Cited

Design of a 100 MW solar power plant on wetland in Bangladesh

Apu Kowsar, Sumon Chandra Debnath, et al.

Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts

Zohreh Kiaee, Andreas Lösel, et al.

Production and characterization of corncob biochar for agricultural use

Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.

Issues

Cover Image

PRELIMINARY

ARTICLES

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only