Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 3130, Issue 1

28 March 2024

XIV INTERNATIONAL CONFERENCE ELECTROMACHINING 2023

9–11 October 2023

Bydgoszcz, Poland

All Issues

Cover Image

Cover Image

In this Issue

PRELIMINARY
EROSION AND UNCONVENTIONAL MACHINING

PRELIMINARY

Preface: XIV International Conference Electromachining 2023

AIP Conf. Proc. 3130, 010001 (2024) https://doi.org/10.1063/12.0025009

View articletitled, Preface: XIV International Conference Electromachining 2023

Open the PDF for in another window

EROSION AND UNCONVENTIONAL MACHINING

Application of the recatest test technique to assess the structural and mechanical quality of nitrided layers produced on S355 and 40HM steels, using the ReCalo2 test stand

Marek Betiuk; Piotr Domanowski; Sławomir Bujnowski; Aleksandra Mirońska; Weronika Goluch

AIP Conf. Proc. 3130, 020001 (2024) https://doi.org/10.1063/5.0204031

Abstract

View articletitled, Application of the recatest test technique to assess the structural and mechanical quality of nitrided layers produced on S355 and 40HM steels, using the ReCalo2 test stand

Open the PDF for in another window

Assessment of structural and mechanical quality of nitrided layers on structural steels with the use of precision metallographic spherical polished microsection in the HRC indentation mark

Marek Betiuk; Piotr Domanowski; Aleksandra Mirońska; Weronika Goluch

AIP Conf. Proc. 3130, 020002 (2024) https://doi.org/10.1063/5.0204033

Abstract

View articletitled, Assessment of structural and mechanical quality of nitrided layers on structural steels with the use of precision metallographic spherical polished microsection in the HRC indentation mark

Open the PDF for in another window

Comparative study of DC and pulse-DC I-V characteristics curves of cylindrical magnetron in open and confined space

Marek Betiuk; Aleksandra Mirońska; Anna W. Oniszczuk; Wojciech Trzewiczyński; Wojciech Gajewski; Piotr Domanowski

AIP Conf. Proc. 3130, 020003 (2024) https://doi.org/10.1063/5.0204549

Abstract

View articletitled, Comparative study of DC and pulse-DC I-V characteristics curves of cylindrical magnetron in open and confined space

Open the PDF for in another window

Influence of electrical discharge machining of the molding cavity on the surface condition of filled polymer moldings

Marek Bieliński; Joanna Chrapkowska; Piotr Czyżewski; Bartosz Nowinka

AIP Conf. Proc. 3130, 020004 (2024) https://doi.org/10.1063/5.0203487

Abstract

View articletitled, Influence of electrical discharge machining of the molding cavity on the surface condition of filled polymer moldings

Open the PDF for in another window

Study on the influence of the pattern angle on the functional properties of products printed from porous PLA filament

Piotr Czyżewski; Dawid Marciniak; Marek Bieliński; Yevhen Bevz

AIP Conf. Proc. 3130, 020005 (2024) https://doi.org/10.1063/5.0205031

Abstract

View articletitled, Study on the influence of the pattern angle on the functional properties of products printed from porous PLA filament

Open the PDF for in another window

Influence of forming cavity various surfaces parameters on the effects of laser processing on the polymer moldings

Piotr Czyżewski; Mateusz Rojewski; Bartosz Nowinka; Piotr Szewczykowski; Karolina Detmer

AIP Conf. Proc. 3130, 020006 (2024) https://doi.org/10.1063/5.0205032

Abstract

View articletitled, Influence of forming cavity various surfaces parameters on the effects of laser processing on the polymer moldings

Open the PDF for in another window

Influence of the EDM process parameters on the surface roughness of the elements made of cast steel L35GSM

Dominik Dudek; Sławomir Spadło; Kinga Pawłowska; Krzysztof Łakomiec

AIP Conf. Proc. 3130, 020007 (2024) https://doi.org/10.1063/5.0206758

Abstract

View articletitled, Influence of the EDM process parameters on the surface roughness of the elements made of cast steel L35GSM

Open the PDF for in another window

Comparative investigations of the abrasive blasting of cast steel G20Mn5 using different blast media

Dominik Dudek; Sławomir Spadło; Piotr Przybysz; Krzysztof Łakomiec

AIP Conf. Proc. 3130, 020008 (2024) https://doi.org/10.1063/5.0206757

Abstract

View articletitled, Comparative investigations of the abrasive blasting of cast steel G20Mn5 using different blast media

Open the PDF for in another window

Study of electrochemical dressing and electrodischarge profiling of superhard grinding wheels

Marcin Gołąbczak; Andrzej Gołąbczak; Jerzy Kozak

AIP Conf. Proc. 3130, 020009 (2024) https://doi.org/10.1063/5.0203554

Abstract

View articletitled, Study of electrochemical dressing and electrodischarge profiling of superhard grinding wheels

Open the PDF for in another window

Study on electrochemical micro-turning process

Marcin Grabowski; Sebastian Skoczypiec; Adam Ruszaj; Karolina Furyk-Grabowska

AIP Conf. Proc. 3130, 020010 (2024) https://doi.org/10.1063/5.0203450

Abstract

View articletitled, Study on electrochemical micro-turning process

Open the PDF for in another window

Optimal feed temperature for an immobilized enzyme fixed-bed reactor: A case study on hydrolysis of sucrose by invertase

Ireneusz Grubecki; Anna Zalewska

AIP Conf. Proc. 3130, 020011 (2024) https://doi.org/10.1063/5.0203922

Abstract

View articletitled, Optimal feed temperature for an immobilized enzyme fixed-bed reactor: A case study on hydrolysis of sucrose by invertase

Open the PDF for in another window

Appliance of tungsten heavy alloys for EDM tool electrodes

Zbigniew Gulbinowicz; Dorota Oniszczuk-Świercz; Olgierd Goroch; Paweł Skoczylas

AIP Conf. Proc. 3130, 020012 (2024) https://doi.org/10.1063/5.0203452

Abstract

View articletitled, Appliance of tungsten heavy alloys for EDM tool electrodes

Open the PDF for in another window

Nanostructure formation during electrospark alloying

Oksana P. Haponova; Viacheslav B. Tarelnyk; Bogdan Antoszewski; Nataliia V. Tarelnyk

AIP Conf. Proc. 3130, 020013 (2024) https://doi.org/10.1063/5.0203521

Abstract

View articletitled, Nanostructure formation during electrospark alloying

Open the PDF for in another window

The effect of laser infrared radiation on the surface modification of DLC coatings

Artur Kalinowski; Norbert Radek; Piotr Sęk; Jacek Pietraszek

AIP Conf. Proc. 3130, 020014 (2024) https://doi.org/10.1063/5.0204985

Abstract

View articletitled, The effect of laser infrared radiation on the surface modification of DLC coatings

Open the PDF for in another window

The use of metaheuristic optimization algorithm in abrasive water jet machining of white marble

Elżbieta Kawecka

AIP Conf. Proc. 3130, 020015 (2024) https://doi.org/10.1063/5.0203448

Abstract

View articletitled, The use of metaheuristic optimization algorithm in abrasive water jet machining of white marble

Open the PDF for in another window

Grinding with multigranular wheel

Adrian Kopytowski; Rafał Świercz; Dorota Oniszczuk-Świercz; Rafał Nowicki

AIP Conf. Proc. 3130, 020016 (2024) https://doi.org/10.1063/5.0203501

Abstract

View articletitled, Grinding with multigranular wheel

Open the PDF for in another window

Influence of reinforcing elements on the structure, properties and dimensional accuracy of 3D printing models

Artur Kościuszko; Dawid Marciniak; Mateusz Rojewski; Natalia Konczal

AIP Conf. Proc. 3130, 020017 (2024) https://doi.org/10.1063/5.0203502

Abstract

View articletitled, Influence of reinforcing elements on the structure, properties and dimensional accuracy of 3D printing models

Open the PDF for in another window

The effect of operating parameters of SLM on product dimensional deviations

Jerzy Kozak; Tomasz Zakrzewski

AIP Conf. Proc. 3130, 020018 (2024) https://doi.org/10.1063/5.0203447

Abstract

View articletitled, The effect of operating parameters of SLM on product dimensional deviations

Open the PDF for in another window

Influence of water jet cutting parameters on the surface quality of AlSi 316L thick plates

Tomasz Lipiński

AIP Conf. Proc. 3130, 020019 (2024) https://doi.org/10.1063/5.0203493

Abstract

View articletitled, Influence of water jet cutting parameters on the surface quality of AlSi 316L thick plates

Open the PDF for in another window

Investigating the effect of filling the filament with rubber powder in the additive manufacturing process

Kinga Majewska-Laks; Dawid Marciniak; Dariusz Sykutera

AIP Conf. Proc. 3130, 020020 (2024) https://doi.org/10.1063/5.0204624

Abstract

View articletitled, Investigating the effect of filling the filament with rubber powder in the additive manufacturing process

Open the PDF for in another window

Review of possible application of artificial intelligence in magnetic-abrasive machining research

Michał Marczak; Rafał Nowicki; Maciej Lato

AIP Conf. Proc. 3130, 020021 (2024) https://doi.org/10.1063/5.0204007

Abstract

View articletitled, Review of possible application of artificial intelligence in magnetic-abrasive machining research

Open the PDF for in another window

Influence of the type of graphite electrode on the EDM process

Rafał Nowicki; Rafał Świercz; Adrian Kopytowski; Michał Marczak

AIP Conf. Proc. 3130, 020022 (2024) https://doi.org/10.1063/5.0204279

Abstract

View articletitled, Influence of the type of graphite electrode on the EDM process

Open the PDF for in another window

Influence of discharge energy on surface roughness of SLM part after wire electrical discharge finishing

Dorota Oniszczuk-Świercz; Rafał Świercz; Adrian Kopytowski; Rafał Nowicki

AIP Conf. Proc. 3130, 020023 (2024) https://doi.org/10.1063/5.0204298

Abstract

View articletitled, Influence of discharge energy on surface roughness of SLM part after wire electrical discharge finishing

Open the PDF for in another window

Research on offset printing performed with a matrix with interchangeable pins

Radosław Owsiński; Tomasz Paczkowski; Piotr Domanowski; Jarosław Zdrojewski

AIP Conf. Proc. 3130, 020024 (2024) https://doi.org/10.1063/5.0204023

Abstract

View articletitled, Research on offset printing performed with a matrix with interchangeable pins

Open the PDF for in another window

Selected surface roughness parameters comparison of elements made by electromachining and milling

Tomasz Paczkowski; Robert Polasik

AIP Conf. Proc. 3130, 020025 (2024) https://doi.org/10.1063/5.0203668

Abstract

View articletitled, Selected surface roughness parameters comparison of elements made by electromachining and milling

Open the PDF for in another window

Multiple-criteria optimization of abrasive water jet (AWJ) cutting using TODIM approach

Andrzej Perec

AIP Conf. Proc. 3130, 020026 (2024) https://doi.org/10.1063/5.0203449

Abstract

View articletitled, Multiple-criteria optimization of abrasive water jet (AWJ) cutting using TODIM approach

Open the PDF for in another window

The influence of lunar regolith simulant selected functional properties of polymeric materials used in FFF technology

Damian Pietrusiak; Piotr Czyżewski; Dawid Marciniak; Mateusz Józefowicz; Marek Macko; Jakub Ciążela

AIP Conf. Proc. 3130, 020027 (2024) https://doi.org/10.1063/5.0203516

Abstract

View articletitled, The influence of lunar regolith simulant selected functional properties of polymeric materials used in FFF technology

Open the PDF for in another window

Comparison of mass and piece feeders working in a rolling-screw system

Wojciech Poćwiardowski

AIP Conf. Proc. 3130, 020028 (2024) https://doi.org/10.1063/5.0203651

Abstract

View articletitled, Comparison of mass and piece feeders working in a rolling-screw system

Open the PDF for in another window

GFRP composite drilling in the aspect of process energetical indicators

Robert Polasik; Jonatan Olszewski

AIP Conf. Proc. 3130, 020029 (2024) https://doi.org/10.1063/5.0203669

Abstract

View articletitled, GFRP composite drilling in the aspect of process energetical indicators

Open the PDF for in another window

Multi-criteria methods in the optimization of the abrasive waterjet cutting process

Aleksandra Radomska-Zalas

AIP Conf. Proc. 3130, 020030 (2024) https://doi.org/10.1063/5.0203525

Abstract

View articletitled, Multi-criteria methods in the optimization of the abrasive waterjet cutting process

Open the PDF for in another window

Influence of post-processing on surface texture of additive manufacturing micro-elements

Joanna Radziejewska; Michał Marczak; Piotr Maj; Anna Głowacka

AIP Conf. Proc. 3130, 020031 (2024) https://doi.org/10.1063/5.0204163

Abstract

View articletitled, Influence of post-processing on surface texture of additive manufacturing micro-elements

Open the PDF for in another window

Investigation on selected meta-heuristic algorithms for optimization the abrasive water jet cutting process - Preliminary results

Stanisław Rawicki; Jerzy Podhajecki

AIP Conf. Proc. 3130, 020032 (2024) https://doi.org/10.1063/5.0207626

Abstract

View articletitled, Investigation on selected meta-heuristic algorithms for optimization the abrasive water jet cutting process - Preliminary results

Open the PDF for in another window

Optimization methods and procedures for DMLM parameters development process with digital tools assisted evaluation of the alloy metallography structure. based on the project RPMA.01.02.00-14-B479/18 from regionalny program Operacyjny Województwa Mazowieckiego

Damian Rączkowski; Tomasz Pokoniewski; Michał Bujak; Łukasz Ocypa; Dorota Szcześniak; Sebastian Szurlej; Paweł Żuk

AIP Conf. Proc. 3130, 020033 (2024) https://doi.org/10.1063/5.0203808

Abstract

View articletitled, Optimization methods and procedures for DMLM parameters development process with digital tools assisted evaluation of the alloy metallography structure. based on the project RPMA.01.02.00-14-B479/18 from regionalny program Operacyjny Województwa Mazowieckiego

Open the PDF for in another window

The influence of injection mold cavity type finished with the EDM process on the polymer moldings surface condition

Mateusz Rojewski; Piotr Czyżewski; Dawid Marciniak; Dariusz Sykutera

AIP Conf. Proc. 3130, 020034 (2024) https://doi.org/10.1063/5.0203503

Abstract

View articletitled, The influence of injection mold cavity type finished with the EDM process on the polymer moldings surface condition

Open the PDF for in another window

Effect of different coolant lubricant supply methods on surface roughness of NC10 steel after conventional and AEDG grinding

Rosik Radosław; Święcik Robert

AIP Conf. Proc. 3130, 020035 (2024) https://doi.org/10.1063/5.0205619

Abstract

View articletitled, Effect of different coolant lubricant supply methods on surface roughness of NC10 steel after conventional and AEDG grinding

Open the PDF for in another window

Effect of hipims discharge in metal oxide nanocoatings for resistive random access memory application

Piotr Różański; Robert Mroczyński; Wojciech Gajewski

AIP Conf. Proc. 3130, 020036 (2024) https://doi.org/10.1063/5.0203485

Abstract

View articletitled, Effect of hipims discharge in metal oxide nanocoatings for resistive random access memory application

Open the PDF for in another window

Importance of industry 4.0 technologies for development of electrical discharge machining

Sebastian Skoczypiec; Waldemar Małopolski

AIP Conf. Proc. 3130, 020037 (2024) https://doi.org/10.1063/5.0203495

Abstract

View articletitled, Importance of industry 4.0 technologies for development of electrical discharge machining

Open the PDF for in another window

Selective laser melting of CP-Ti based bio-compatible powder mixtures and metal matrix composites

Grzegorz Skrabalak; Andrzej Stwora; Yulia Rumiantseva; Aleksandra Bętkowska; Karolina Chat-Wilk

AIP Conf. Proc. 3130, 020038 (2024) https://doi.org/10.1063/5.0204032

Abstract

View articletitled, Selective laser melting of CP-Ti based bio-compatible powder mixtures and metal matrix composites

Open the PDF for in another window

Metal additive manufacturing – AFM postprocessing technology

Rafał Świercz; Dorota Oniszczuk-Świercz

AIP Conf. Proc. 3130, 020039 (2024) https://doi.org/10.1063/5.0204297

Abstract

View articletitled, Metal additive manufacturing – AFM postprocessing technology

Open the PDF for in another window

Analysis of electro-spark alloying methods using one-component special technological environments

Viacheslav B. Tarelnyk; Oksana P. Haponova; Nataliia V. Tarelnyk; Czesław Kundera; Andriy V. Zahorulko

AIP Conf. Proc. 3130, 020040 (2024) https://doi.org/10.1063/5.0203522

Abstract

View articletitled, Analysis of electro-spark alloying methods using one-component special technological environments

Open the PDF for in another window

Gas as a medium in electro-erosion

Tadeusz Zaborowski

AIP Conf. Proc. 3130, 020041 (2024) https://doi.org/10.1063/5.0205273

Abstract

View articletitled, Gas as a medium in electro-erosion

Open the PDF for in another window

Investigation the effect of silver nanoparticles and ionic surfactant contents on the stability and thermo-mechanical properties of acrylic dispersion

Anna Zalewska; Ireneusz Grubecki

AIP Conf. Proc. 3130, 020042 (2024) https://doi.org/10.1063/5.0203626

Abstract

View articletitled, Investigation the effect of silver nanoparticles and ionic surfactant contents on the stability and thermo-mechanical properties of acrylic dispersion

Open the PDF for in another window

Recent developments in dry electro discharge machining

Agnieszka Żyra; Sebastian Skoczypiec

AIP Conf. Proc. 3130, 020043 (2024) https://doi.org/10.1063/5.0203889

Abstract

View articletitled, Recent developments in dry electro discharge machining

Open the PDF for in another window

Sign up for alerts

RSS

Current Issue RSS Feed

Open Issues RSS Feed

Most Read
Most Cited

Design of a 100 MW solar power plant on wetland in Bangladesh

Apu Kowsar, Sumon Chandra Debnath, et al.

Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts

Zohreh Kiaee, Andreas Lösel, et al.

The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill

Lala Nurlatifah, Pupung Purnawarman, et al.

Issues

Cover Image

PRELIMINARY

EROSION AND UNCONVENTIONAL MACHINING

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only