Skip Nav Destination
Issues
30 September 2024
THE 8TH INTERNATIONAL CONFERENCE AND EXHIBITION ON SUSTAINABLE ENERGY AND ADVANCED MATERIALS (ICE-SEAM) 2022
28–29 October 2022
Bandung, Indonesia
-
Cover Image
Cover Image
PRELIMINARY
MATERIALS AND KEYNOTE SPEAKER
DESIGN AND INVITED SPEAKER
MATERIALS AND INVITED SPEAKER
Effect of fabrication methods on the magnetostriction of magnetorheological foams
Nur Azmah Nordin; Muhammad Nursyahmi Mohamad Nazri; Saiful Amri Mazlan; Izzatil Ameerah Jais; Siti Aishah Abdul Aziz; Ubaidillah; Norhiwani Mohd Hapipi
AIP Conf. Proc. 3124, 040001 (2024)
https://doi.org/10.1063/5.0227792
Adsorption thermal energy storage: The problematic of theoretical and practical adsorption materials performance
AIP Conf. Proc. 3124, 040002 (2024)
https://doi.org/10.1063/5.0228013
ENERGY AND INVITED SPEAKER
Surface temperature effect on various diameter of photo-voltaic thermal integrated with phase change material
Siti Nur Dini Noordin Saleem; Mohd Afzanizam Mohd Rosli; Nortazi Sanusi; Nurfarhana Salimen; Safarudin Gazali Herawan; Faridah Hussain; Norli Abdullah
AIP Conf. Proc. 3124, 050001 (2024)
https://doi.org/10.1063/5.0230076
DESIGN
Effect of flap deflection on single-element wing flow characteristics in wing airfoil NACA 43018
AIP Conf. Proc. 3124, 060002 (2024)
https://doi.org/10.1063/5.0227766
Analysis of the bird Strike effect on the lift and drag coefficient of NACA 2412 airfoil
AIP Conf. Proc. 3124, 060003 (2024)
https://doi.org/10.1063/5.0227840
Queue system modeling and optimization using simevents at MATLAB: Bank account mutation case
AIP Conf. Proc. 3124, 060004 (2024)
https://doi.org/10.1063/5.0228056
Design and performance evaluation of alternative home care systems for detecting SARS CoV-2 using the RT-LAMP method
Mudjijana; Nurvita Risdiana; Arya Adiningrat; Rela Adi Himarosa; Krisdiyanto; Rahmad Kuncoro Adi; Evy Yulianti; Fajar Sofyantoro; Muchamad Afif Ansori
AIP Conf. Proc. 3124, 060005 (2024)
https://doi.org/10.1063/5.0232199
Savonius water turbine performance: Study case the number of blade effects on deflector device
AIP Conf. Proc. 3124, 060007 (2024)
https://doi.org/10.1063/5.0228633
Tubular member sizing optimization of a conventional air cooler support frame structure
AIP Conf. Proc. 3124, 060008 (2024)
https://doi.org/10.1063/5.0227752
Ideal equivalence ratio analysis of three-staged gasifier for municipal solid waste (MSW)
AIP Conf. Proc. 3124, 060009 (2024)
https://doi.org/10.1063/5.0227982
Experimental investigation on shaft motor coupling misalignment impact on energy consumption
AIP Conf. Proc. 3124, 060011 (2024)
https://doi.org/10.1063/5.0228180
Characteristics of the nozzle on the water spray cooling system as a photovoltaic solar panel cooler: A review
AIP Conf. Proc. 3124, 060012 (2024)
https://doi.org/10.1063/5.0227757
Evaluation and analysis of tilting table designs for disabled patients
AIP Conf. Proc. 3124, 060014 (2024)
https://doi.org/10.1063/5.0228889
Effect of nanofluids Al2O3-Water based collector material on thermal collector photovoltaic performance: Computational fluids dynamics investigation
Zainal Arifin; Noval Fattah Alfaiz; Dominicus Danardono Dwi Prija Tjahjana; Rendy Adhi Rachmanto; Aditya Rio Prabowo; Singgih Dwi Prasetyo
AIP Conf. Proc. 3124, 060015 (2024)
https://doi.org/10.1063/5.0227756
Computational fluid dynamics investigation: The effect of phase change material addition on thermal collector system performance
Zainal Arifin; Singgih Dwi Prasetyo; Yudin Joko Prasojo; Dominicus Danardono Dwi Prija Tjahjana; Rendy Adhi Rachmanto; Aditya Rio Prabowo; Annisa Larasati
AIP Conf. Proc. 3124, 060016 (2024)
https://doi.org/10.1063/5.0227754
ENERGY
Effective microorganisms delignification of empty fruit bunch as co-substrate in palm oil mill effluent anaerobic digestion
Muhammad Alplex Firstonda Katon; Wargiantoro Prabowo; Trisno Anggoro; Zulaicha Dwi Hastuti; Rinaldi Medali Rachman; Hasannuddin Abd Kadir; Dhani Avianto Sugeng
AIP Conf. Proc. 3124, 070001 (2024)
https://doi.org/10.1063/5.0227751
Evaluation of the response amplitude operator(s) of an integrated barge floating wind turbine-aquaculture
AIP Conf. Proc. 3124, 070002 (2024)
https://doi.org/10.1063/5.0227741
Horowitz-Metzger kinetic analysis of coconut shell waste combustion using thermogravimetric technique
Sukarni Sukarni; Agus Andika Putra; Ardianto Prasetiyo; Yahya Zakaria; Ahmad Yusril Aminullah; Avita Ayu Permanasari; Poppy Puspitasari
AIP Conf. Proc. 3124, 070003 (2024)
https://doi.org/10.1063/5.0228173
Infrared spectrum changes of Spirulina platensis and synthetic waste mixture before and after combustion in a circulating fluidized bed combustor
Mohammad Mirza Yuniar Romaz; Sukarni Sukarni; Poppy Puspitasari; Nandang Mufti; Samsudin Anis; Anwar Johari
AIP Conf. Proc. 3124, 070004 (2024)
https://doi.org/10.1063/5.0228175
Inorganic elemental composition analysis of Arthrospira platensis-Activated carbon blend at mass ratio of 10:1 for considering its thermal conversion characteristics
Ahmad Yusril Aminullah; Yahya Zakaria; Sukarni Sukarni; Avita Ayu Permanasari; Samsudin Anis; Anwar Johari
AIP Conf. Proc. 3124, 070006 (2024)
https://doi.org/10.1063/5.0228178
Water resistance characteristics of carbonized rice husk bio-briquette with Eichhornia crassipes as a binder
Bagus Ardiansyah Dharmawan; Sukarni Sukarni; Avita Ayu Permanasari; Poppy Puspitasari; Yahya Zakaria; Nandang Mufti; Samsudin Anis; Anwar Johari
AIP Conf. Proc. 3124, 070007 (2024)
https://doi.org/10.1063/5.0228181
Heat treatment of tool steel: Recent development and micro-industrial application in Indonesia
AIP Conf. Proc. 3124, 070009 (2024)
https://doi.org/10.1063/5.0227833
Wear behaviour of helical gear in a power recirculating configuration under torsional loading
AIP Conf. Proc. 3124, 070010 (2024)
https://doi.org/10.1063/5.0228176
NaOH presoaking combined with hydrothermal processing of empty fruit bunch (EFB) as co-substrate in palm oil mill effluent (POME) anaerobic digestion
Aldrin Sanova; Sri Djangkung Sumbogo; Frendy Rian Saputro; Zulaicha Dwi Hastuti; Ade Syarinaldy; Winda Wulandari; Hens Saputra; Rinaldi Medali Rachman; Irfan Bahiuddin; Dhani Avianto Sugeng
AIP Conf. Proc. 3124, 070011 (2024)
https://doi.org/10.1063/5.0227755
Anaerobic co-digestion of POME and NaOH- pretreated empty fruit bunch
Muhammad Ilham Akbar; Frendy Rian Saputro; Novi Syaftika; Zulaicha Dwi Hastuti; Arya Bhaskara Adiprabowo; Rinaldi Medali Rachman; Ahmad Muhsin Ithnin; Dhani Avianto Sugeng
AIP Conf. Proc. 3124, 070012 (2024)
https://doi.org/10.1063/5.0227759
Influence of thermoelectric cooling installation arrangement methods on cooling performance - an experimental study
AIP Conf. Proc. 3124, 070014 (2024)
https://doi.org/10.1063/5.0228270
Non-Isothermal kinetic analysis and thermal decomposition of sengon wood (Paraserianthes falcataria)
AIP Conf. Proc. 3124, 070015 (2024)
https://doi.org/10.1063/5.0228063
The effect of fin height on the adsorption refrigeration system with activated carbon-ethanol working pairs
Indri Yaningsih; Dominicus Danardono Dwi Prija Tjahjana; Hanna Nursya’bani; Afifah Nur Chairinissa; Dody Ariawan; Nasruddin Nasruddin; Edy Hartulistiyo; Takahiko Miyazaki
AIP Conf. Proc. 3124, 070016 (2024)
https://doi.org/10.1063/5.0228413
Power modeling in rotary vacuum evaporator for Meniran extraction process
AIP Conf. Proc. 3124, 070018 (2024)
https://doi.org/10.1063/5.0230793
Thermal behavior and combustion kinetics of arthrospira platensis-activated carbon mixture at mass ratio of 10:3
Rakhmat Aji Romadinullah; Sukarni Sukarni; Yahya Zakaria; Ahmad Yusril Aminullah; Avita Ayu Permanasari; Samsudin Anis; Anwar Johari
AIP Conf. Proc. 3124, 070019 (2024)
https://doi.org/10.1063/5.0228182
Electricity generation and stability of dye-sensitized solar cells (DSSCs) employing indigofera as sensitizers
AIP Conf. Proc. 3124, 070020 (2024)
https://doi.org/10.1063/5.0227991
MATERIALS
Effect of weathering test on physical and mechanical properties of wood plastic composite
AIP Conf. Proc. 3124, 080001 (2024)
https://doi.org/10.1063/5.0228202
Angular frequency effects and shear band formation in a magnetorheological elastomer under stress relaxation
Mohd Aidy Faizal Johari; Huzaini Mohd Noor; Saiful Amri Mazlan; Nur Azmah Nordin; Muntaz Hana Ahmad Khairi; Siti Aishah Abdul Aziz; Ubaidillah Ubaidillah
AIP Conf. Proc. 3124, 080002 (2024)
https://doi.org/10.1063/5.0227970
Investigation into the magnetic disturbance phenomenon in magnetorheological elastomer tensile testing
Siti Fatimah Mohd Shahar; Norhasnidawani Johari; Saiful Amri Mazlan; Mohd Aidy Faizal Johari; Siti Aishah Abdul Aziz; Nurul Liyana Burhannuddin; Ubaidillah Ubaidillah
AIP Conf. Proc. 3124, 080003 (2024)
https://doi.org/10.1063/5.0227977
Enhancement of magnetorheological elastomer properties by incorporating silicon carbide through plasticization
Muntaz Hana Ahmad Khairi; Saiful Amri Mazlan; Nur Azmah Nordin; Mohd Aidy Faizal Johari; Siti Maisarah Ahmad Tarmizi; Norhiwani Mohd Hapipi; Ubaidillah Ubaidillah
AIP Conf. Proc. 3124, 080004 (2024)
https://doi.org/10.1063/5.0227975
Thermal stability enhancement of magnetorheological grease with cobalt-ferrite particles as additive
Siti Maisarah Ahmad Tarmizi; Nur Azmah Nordin; Saiful Amri Mazlan; Shaokath Al Hafiz Savukkath Ali; Siti Aishah Abdul Aziz; Norzilawati Mohamad; Muntaz Hana Ahmad Khairi
AIP Conf. Proc. 3124, 080005 (2024)
https://doi.org/10.1063/5.0227794
Effect of constraint volume of mould system towards the rheological properties of magnetorheological foam
Ainaa Amirah Marzuki; Nur Azmah Nordin; Saiful Amri Mazlan; Siti Asma’ Nikmat Leong; Ubaidillah Ubaidillah; Rahayu Emilia Mohamed Khaidir; Norhiwani Mohd Hapipi; Nurul Azhani Yunus
AIP Conf. Proc. 3124, 080006 (2024)
https://doi.org/10.1063/5.0227796
Effect of nozzle temperatures on the densification of 316L SS alloy fabricated by fused filament fabrication metal 3D printing technique
Nur Hidayah Musa; Shahir Mohd Yusuf; Farah Liana Mohd Redzuan; Nur Azmah Nordin; Saiful Amri Mazlan; Ubaidillah Ubaidillah; Nurainaa Natasya Mazlan
AIP Conf. Proc. 3124, 080008 (2024)
https://doi.org/10.1063/5.0228722
A simple approach for additive manufacturing of inconel 718 with high densification level by fused filament fabrication
Nurainaa Mazlan; Shahir Mohd Yusuf; Nur Azmah Nordin; Saiful Amri Mazlan; Ubaidillah Ubaidillah; Nur Hidayah Musa
AIP Conf. Proc. 3124, 080009 (2024)
https://doi.org/10.1063/5.0228721
Comparative study on the machine learning-based techniques for magnetorheological elastomer dynamic properties prediction
Kasma Diana Saharuddin; Mohd Hatta Mohammed Ariff; Irfan Bahiuddin; Saiful Amri Mazlan; Nurhazimah Nazmi; Ubaidillah Ubaidillah
AIP Conf. Proc. 3124, 080010 (2024)
https://doi.org/10.1063/5.0229967
Approach of artificial neural network to predict field-dependent rheological properties of magnetorheological plastomer
Dahlia Murni Mohamad Noor; Nur Azmah Nordin; Saiful Amri Mazlan; Nurhazimah Nazmi; Irfan Bahiuddin; Norhiwani Mohd Hapipi; Kasma Diana Saharuddin; Muhamad Amirul Sunni Rohim
AIP Conf. Proc. 3124, 080011 (2024)
https://doi.org/10.1063/5.0227797
Effect of frequency sweep towards the stiffness of magnetorheological foam with silica nanoparticles additive
Rahayu Emilia Mohamed Khaidir; Nur Azmah Nordin; Saiful Amri Mazlan; Ubaidillah Ubaidillah; Siti Asma’ Nikmat Leong; Hamimah Abd Rahman; Ainaa Amirah Marzuki
AIP Conf. Proc. 3124, 080016 (2024)
https://doi.org/10.1063/5.0227798
Effect of Cu-Water nanofluid concentration on thermal collector system performance: Computational fluids dynamics investigation
Singgih Dwi Prasetyo; Zainal Arifin; Dominicus Danardono Dwi Prija Tjahjana; Rendy Adhi Rachmanto; Aditya Rio Prabowo; Noval Fattah Alfaiz
AIP Conf. Proc. 3124, 080017 (2024)
https://doi.org/10.1063/5.0227753
Effect of austempering temperatures on impact toughness of steel grade 42CrMo4
AIP Conf. Proc. 3124, 080018 (2024)
https://doi.org/10.1063/5.0227740
Prediction of field dependent damping force as a function of magnetorheological damper design parameters using a machine learning method
Khulil Jannata Fadhlillah; Irfan Bahiuddin; Nico Pratama; Fitrian Imaduddin; Ubaidillah; Saiful Amri Mazlan; Nurhazimah Nazmi
AIP Conf. Proc. 3124, 080020 (2024)
https://doi.org/10.1063/5.0228150
Inverse model identification of magnetorheological damper using extreme learning machine method
Nico Pratama; Irfan Bahiuddin; Khulil Jannata Fadhlillah; Muhammad Rizal Ramli; Fitrian Imaduddin; Saiful Amri Mazlan; Nurhazimah Nazmi; Mohd. H. M. Ariff
AIP Conf. Proc. 3124, 080021 (2024)
https://doi.org/10.1063/5.0228151
Effect of recycled powder mixture on mechanical properties of PA12 SLS lattice structure
AIP Conf. Proc. 3124, 080022 (2024)
https://doi.org/10.1063/5.0227749
Modified flame retardant active filler particle of pumice, aluminum trihydrate and boric acid on glass fiber reinforced polymer composites based on unsaturated polyester resin
Andry Rakhman; Kuncoro Diharjo; Wijang Wisnu Raharjo; Venty Suryanti; Sunarto Kaleg; Burhanudin Yusuf
AIP Conf. Proc. 3124, 080023 (2024)
https://doi.org/10.1063/5.0229043
The effect of glycerol on the properties of bioplastic from cellulose of oil palm empty fruit bunches (OPEFB)
AIP Conf. Proc. 3124, 080024 (2024)
https://doi.org/10.1063/5.0227832
Effect of operating temperatures towards the magnetostriction of magnetorheological foams
Nurul Nadia Senin; Nur Azmah Nordin; Saiful Amri Mazlan; Siti Asma’ Nikmat Leong; Izzatil Ameerah Jais; Norhiwani Mohd Hapipi; Shahir Yasin Mohd Yusuf
AIP Conf. Proc. 3124, 080027 (2024)
https://doi.org/10.1063/5.0227801
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.