Skip Nav Destination
Issues
10 June 2024
ELECTROMECHANICAL ENGINEERING AND ITS APPLICATIONS
19–20 July 2022
Baghdad, Iraq
-
Cover Image
Cover Image
In this Issue
PRELIMINARY
Preface: The 3rd International Conference on Electromechanical Engineering & its Applications (ICEMEA-2022)
AIP Conf. Proc. 3002, 010001 (2024)
https://doi.org/10.1063/12.0025228
Committees: The 3rd International Conference on Electromechanical Engineering & its Applications (ICEMEA-2022)
AIP Conf. Proc. 3002, 010002 (2024)
https://doi.org/10.1063/12.0026154
NAVIGATION AND GUIDANCE SYSTEMS, COMPUTER AND COMMUNICATION ENGINEERING
Performance improvement of hybrid orthogonal optical signals for small enclosed environments
AIP Conf. Proc. 3002, 020001 (2024)
https://doi.org/10.1063/5.0205979
Design and analysis of a 3-Order folded hairpin line band pass filter for communication application
AIP Conf. Proc. 3002, 020003 (2024)
https://doi.org/10.1063/5.0205855
5G channel estimation for SISO-OFDM communication systems using deep learning
AIP Conf. Proc. 3002, 020004 (2024)
https://doi.org/10.1063/5.0205915
An enhanced technique for removing soft tissues and highlighting regions of interest in medical images
AIP Conf. Proc. 3002, 020005 (2024)
https://doi.org/10.1063/5.0206523
Extracting baseline wander from ECG signals using modified efficient independent component analyses
AIP Conf. Proc. 3002, 020006 (2024)
https://doi.org/10.1063/5.0206526
Multicarrier millimeter wave through wireless optical communication
AIP Conf. Proc. 3002, 020007 (2024)
https://doi.org/10.1063/5.0205791
Performance enhancement of smart antenna for 5G MIMO communication
AIP Conf. Proc. 3002, 020009 (2024)
https://doi.org/10.1063/5.0206209
Performance evaluation of channel estimation for filter bank multicarrier modulation
AIP Conf. Proc. 3002, 020010 (2024)
https://doi.org/10.1063/5.0206154
Reduction of the scintillation effects in WDM-FSO system using multibeam technique
AIP Conf. Proc. 3002, 020011 (2024)
https://doi.org/10.1063/5.0206388
Vehicle detection and tracking of moving vehicles for the surveillance videos
AIP Conf. Proc. 3002, 020012 (2024)
https://doi.org/10.1063/5.0208245
Efficient energy design of NRPC-CSS under selective Rayleigh fading channel
AIP Conf. Proc. 3002, 020013 (2024)
https://doi.org/10.1063/5.0205974
Automatically PID controller for antenna azimuth position system
AIP Conf. Proc. 3002, 020014 (2024)
https://doi.org/10.1063/5.0206149
Design of tri-band hairpin line band pass filter for S-band communication application
AIP Conf. Proc. 3002, 020015 (2024)
https://doi.org/10.1063/5.0205856
AVIONICS SYSTEMS, AIRCRAFT AND UNMANNEDAIRCRAFT ENGINEERING
Comparison analysis of vibrated inverted with cart pendulum using PID and observed based controllers
AIP Conf. Proc. 3002, 030002 (2024)
https://doi.org/10.1063/5.0205944
Kinematic modelling and trajectory planning for a 4-DOF robotic arm
AIP Conf. Proc. 3002, 030003 (2024)
https://doi.org/10.1063/5.0206143
Optimal design of thrust active magnetic bearing (TAMB) used in main rotor of gas turbine model (ME9001)
AIP Conf. Proc. 3002, 030004 (2024)
https://doi.org/10.1063/5.0206067
Preparation and characterization of copper nanoparticles as antibacterial activity
AIP Conf. Proc. 3002, 030005 (2024)
https://doi.org/10.1063/5.0206453
Design and simulation of electromechanical pulmonary resuscitation device
AIP Conf. Proc. 3002, 030006 (2024)
https://doi.org/10.1063/5.0209530
EARTH’S NATURAL RESOURCES, GAS AND PETROLEUM SYSTEMS AND EQUIPMENT
Enhancement the performance of underground cable joints by using heat pipe
AIP Conf. Proc. 3002, 040001 (2024)
https://doi.org/10.1063/5.0205968
Effect of ternary hybrid nanofluid and flow wave mechanism on PV/T heat transfer and power production performance
AIP Conf. Proc. 3002, 040002 (2024)
https://doi.org/10.1063/5.0205929
ELECTRICAL AND ELECTRONICS ENGINEERING
Design and implementation of a solar tracking system using a hydraulic system
AIP Conf. Proc. 3002, 050001 (2024)
https://doi.org/10.1063/5.0205799
Study of upper drum boiler performance for steam power plant
AIP Conf. Proc. 3002, 050002 (2024)
https://doi.org/10.1063/5.0207320
Simulation model of using ANN and PID controller for 2Ph-HSM by matlab
AIP Conf. Proc. 3002, 050004 (2024)
https://doi.org/10.1063/5.0206748
Thermal analysis of two basic bidirectional DC-DC converters
AIP Conf. Proc. 3002, 050005 (2024)
https://doi.org/10.1063/5.0206201
Response analysis of deformed vibrated thin wire under loading
AIP Conf. Proc. 3002, 050006 (2024)
https://doi.org/10.1063/5.0206585
Defect detection of rolling element bearings rotor system using vibration measurements of bearings base
AIP Conf. Proc. 3002, 050007 (2024)
https://doi.org/10.1063/5.0205829
The dynamic effect of nano-lubricant oils on the rotating machines behavior
AIP Conf. Proc. 3002, 050008 (2024)
https://doi.org/10.1063/5.0205830
Improvement the surface roughness of cylindrical shapes by magnetic abrasive finishing system
AIP Conf. Proc. 3002, 050011 (2024)
https://doi.org/10.1063/5.0205932
Optimizing the MRR in WEDM process by using Taguchi analysis and GA technique
AIP Conf. Proc. 3002, 050013 (2024)
https://doi.org/10.1063/5.0205987
Experimental study of crushing behaviour of steel thin-walled twisted prism
AIP Conf. Proc. 3002, 050015 (2024)
https://doi.org/10.1063/5.0206520
The operation and control system of the small dual wind turbine manufactured
AIP Conf. Proc. 3002, 050017 (2024)
https://doi.org/10.1063/5.0207072
Implement a water pumps intelligent controller for industrial applications
AIP Conf. Proc. 3002, 050018 (2024)
https://doi.org/10.1063/5.0205860
PID controller for speed and position of antenna system based DC servo motor
AIP Conf. Proc. 3002, 050019 (2024)
https://doi.org/10.1063/5.0206151
ELECTROMECHANICAL SYSTEM, AND MECHATRONICS ENGINEERING
The optimum vortex tube experimental designing by the support of a multi-attribute decision-making technique
AIP Conf. Proc. 3002, 060001 (2024)
https://doi.org/10.1063/5.0208021
Effect of convergent divergent channel on hydro-thermal evaluation for two outlet mini-channel heat sink model
AIP Conf. Proc. 3002, 060002 (2024)
https://doi.org/10.1063/5.0205969
Implementation and comparison of numerical and experimental analysis for subsonic wind tunnel
AIP Conf. Proc. 3002, 060003 (2024)
https://doi.org/10.1063/5.0208693
Thermal performance features of the bio-pumping unit with automatic controller based on neural network
AIP Conf. Proc. 3002, 060004 (2024)
https://doi.org/10.1063/5.0205862
Power generated by solar panel in fixed and tracker states compared using automatic and manual control
AIP Conf. Proc. 3002, 060006 (2024)
https://doi.org/10.1063/5.0206212
Design and manufacturing of 3D scanner for surface reconstruction of an object using meshlab
AIP Conf. Proc. 3002, 060008 (2024)
https://doi.org/10.1063/5.0209734
Simulation analysis of vibration and noise characteristics in gear-train box
AIP Conf. Proc. 3002, 060009 (2024)
https://doi.org/10.1063/5.0205697
Implementation of a rotating machines monitoring system based on lateral vibrations measurements
AIP Conf. Proc. 3002, 060010 (2024)
https://doi.org/10.1063/5.0206396
The effect of die and blank holder geometry on the hardness of sheet metal formed by the stamping process
AIP Conf. Proc. 3002, 060011 (2024)
https://doi.org/10.1063/5.0205992
Mechanical and structural characteristics of ZnO: Cu thin film
AIP Conf. Proc. 3002, 060013 (2024)
https://doi.org/10.1063/5.0209737
Effect of ZnO wt.% on microstructure and mechanical properties epoxy/ZnO nanocomposite
AIP Conf. Proc. 3002, 060014 (2024)
https://doi.org/10.1063/5.0208268
Microstructure and mechanical properties of a hybrid epoxy/ZnO + Gr nanocomposites
AIP Conf. Proc. 3002, 060015 (2024)
https://doi.org/10.1063/5.0208266
Octagonal shape design through the use of FEA and experimental methods are created in deep drawing
AIP Conf. Proc. 3002, 060016 (2024)
https://doi.org/10.1063/5.0205958
Experimental investigation of the rubber pad hardness and height influence on the drawing of low carbon steel cup
AIP Conf. Proc. 3002, 060017 (2024)
https://doi.org/10.1063/5.0209012
Study of electrode speed on material removal rate in electrochemical machining (ECM) process
AIP Conf. Proc. 3002, 060018 (2024)
https://doi.org/10.1063/5.0208101
Characterization the effect of hot dip galvanize on the mechanical and the fatigue properties of the steel B500B
AIP Conf. Proc. 3002, 060019 (2024)
https://doi.org/10.1063/5.0205889
Experimental investigation and optimization of surface roughness and kerf width in wire-EDM process
AIP Conf. Proc. 3002, 060020 (2024)
https://doi.org/10.1063/5.0206629
Study of the impact of holes and their distance from the middle of rotation in spur gear on vibrations
AIP Conf. Proc. 3002, 060021 (2024)
https://doi.org/10.1063/5.0206935
The effect of FSW rotation and travel speed on corrosion behaviour of 6061-T6 welded joint
AIP Conf. Proc. 3002, 060024 (2024)
https://doi.org/10.1063/5.0205976
Improve mechanical properties for epoxy composite material by enhanced it with natural fibers hybridization
AIP Conf. Proc. 3002, 060025 (2024)
https://doi.org/10.1063/5.0208085
Analysis of thickness distribution in deep drawing the brass by using friction actuated sheet metal forming
AIP Conf. Proc. 3002, 060027 (2024)
https://doi.org/10.1063/5.0209013
A new approach for designing small horizontal axis wind turbine blades
AIP Conf. Proc. 3002, 060028 (2024)
https://doi.org/10.1063/5.0206471
The influence of filler and fiber types on the tensile and flexural strengths of a composite used for body armor
AIP Conf. Proc. 3002, 060029 (2024)
https://doi.org/10.1063/5.0207469
Simulation model of FLC-PID based speed control system for DC motor drive by using matlab
AIP Conf. Proc. 3002, 060030 (2024)
https://doi.org/10.1063/5.0206580
ENERGY AND RENEWABLE ENERGIES
Experimental and numerical investigation to the aspect ratio effect on the performance of two phase thermosyphon
AIP Conf. Proc. 3002, 070001 (2024)
https://doi.org/10.1063/5.0205871
Experimental study to investigate the influence of air bubble injection on solar water collector performance
AIP Conf. Proc. 3002, 070002 (2024)
https://doi.org/10.1063/5.0206468
Optimizing the performance of the photovoltaic solar panel by using a suitable tracking system in Karbala
AIP Conf. Proc. 3002, 070003 (2024)
https://doi.org/10.1063/5.0206216
Method for modeling photovoltaic panel systems using neural networks
AIP Conf. Proc. 3002, 070004 (2024)
https://doi.org/10.1063/5.0205927
Thermal investigation of solar collector with variable solar flux using new design sun simulator
AIP Conf. Proc. 3002, 070005 (2024)
https://doi.org/10.1063/5.0209419
Exergetic and energetic experimental analysis study of solar assisted thermoelectric air-conditioning system
AIP Conf. Proc. 3002, 070006 (2024)
https://doi.org/10.1063/5.0206583
Experimental investigation of the performance of evacuated tube solar collector with finned heat pipe
AIP Conf. Proc. 3002, 070007 (2024)
https://doi.org/10.1063/5.0206949
Condition-based automatic cooling and cleaning system for performance optimization of PV modules
AIP Conf. Proc. 3002, 070008 (2024)
https://doi.org/10.1063/5.0206722
Estimation solar irradiation for holy Al-Najaf city under clear sky condition using MATLAB
AIP Conf. Proc. 3002, 070009 (2024)
https://doi.org/10.1063/5.0205908
Numerical analysis to enhance thermal stratification in a baffle storage tank
AIP Conf. Proc. 3002, 070011 (2024)
https://doi.org/10.1063/5.0206469
The design an intelligent PV panel’s faults detection system based on an improved Sugeno fuzzy inference technique
AIP Conf. Proc. 3002, 070012 (2024)
https://doi.org/10.1063/5.0206963
Comparative thermal performance between closed loop two phase and single phase thermosyphon solar heating system
AIP Conf. Proc. 3002, 070013 (2024)
https://doi.org/10.1063/5.0210136
Design and implementation of parabolic trough solar collector for water heating
AIP Conf. Proc. 3002, 070014 (2024)
https://doi.org/10.1063/5.0205989
CFD simulation of influence solar mode on artificial air vortex generation
AIP Conf. Proc. 3002, 070015 (2024)
https://doi.org/10.1063/5.0206382
Experimental investigation of new hybrid photovoltaic-thermal model performance under various operating conditions
AIP Conf. Proc. 3002, 070017 (2024)
https://doi.org/10.1063/5.0205972
Experimental investigation to enhance PV panel performance utilizing multi air cooling slot inlet
AIP Conf. Proc. 3002, 070018 (2024)
https://doi.org/10.1063/5.0205954
Adoption and implementation of IoT technology for hybrid renewable energy system
AIP Conf. Proc. 3002, 070019 (2024)
https://doi.org/10.1063/5.0205798
Intelligent modelling (NARX) of evacuated tube heat pipe solar collectors
AIP Conf. Proc. 3002, 070021 (2024)
https://doi.org/10.1063/5.0206948
Design and construction heat recovery unit using rejected heat from condenser of fridge
AIP Conf. Proc. 3002, 070022 (2024)
https://doi.org/10.1063/5.0206917
An approach for optimum under frequency based load shedding for a power system network
AIP Conf. Proc. 3002, 070023 (2024)
https://doi.org/10.1063/5.0206171
Optimal design of a permanent magnet synchronous generator for small multi-rotor wind turbine conversion systems
AIP Conf. Proc. 3002, 070024 (2024)
https://doi.org/10.1063/5.0206747
Thermal performance of the evacuated tube solar collector (ETSC) using (PCM) with different fluid flow rates
AIP Conf. Proc. 3002, 070026 (2024)
https://doi.org/10.1063/5.0207652
Thermal analysis of the evacuated tube solar collector using (PCM) with different working fluids
AIP Conf. Proc. 3002, 070027 (2024)
https://doi.org/10.1063/5.0207653
Nonlinear controllers design for wind farm generation system with power support
AIP Conf. Proc. 3002, 070029 (2024)
https://doi.org/10.1063/5.0205828
Microstructure and mechanical properties of dissimilar welding T22/T91 using different filler metals
AIP Conf. Proc. 3002, 070030 (2024)
https://doi.org/10.1063/5.0207471
Modeling of a domestic hybrid electric/solar water heating system
AIP Conf. Proc. 3002, 070031 (2024)
https://doi.org/10.1063/5.0206383
Performance characteristics a photovoltaic liquid pumping system under various operation conditions
AIP Conf. Proc. 3002, 070032 (2024)
https://doi.org/10.1063/5.0205861
Thermal performance of a smart sunflower system proposed for urban planning
AIP Conf. Proc. 3002, 070033 (2024)
https://doi.org/10.1063/5.0205978
Improving the thermal performance of transformer oil by modifying fin shapes
AIP Conf. Proc. 3002, 070034 (2024)
https://doi.org/10.1063/5.0205921
Numerical investigation on a radiant slab cooling-heating system’s effect on air-conditioned space
AIP Conf. Proc. 3002, 070035 (2024)
https://doi.org/10.1063/5.0205875
Performance of a photovoltaic module with an active cooling system and reflectors
AIP Conf. Proc. 3002, 070036 (2024)
https://doi.org/10.1063/5.0205928
Enhancement of tracking panels power generation by utilizing a smart cooling technique
AIP Conf. Proc. 3002, 070037 (2024)
https://doi.org/10.1063/5.0206588
Preparation and characterization of SiO2 nanocoating for self-cleaning solar panels
AIP Conf. Proc. 3002, 070039 (2024)
https://doi.org/10.1063/5.0208083
Thermal performance characteristics of sunflower seed oil as a renewable bio fluid
AIP Conf. Proc. 3002, 070040 (2024)
https://doi.org/10.1063/5.0205863
Experimental evaluation the effect of tilt angle on solar panel performance in Baghdad
AIP Conf. Proc. 3002, 070042 (2024)
https://doi.org/10.1063/5.0205993
The efficiency of supercritical fluid to heat transfer by using solvent modifications over mini channels
AIP Conf. Proc. 3002, 070043 (2024)
https://doi.org/10.1063/5.0205779
Investigation of heat transfer based supercritical fluid through confined flow
AIP Conf. Proc. 3002, 070044 (2024)
https://doi.org/10.1063/5.0205782
An empirical study of the electric solar refrigerator based on Iraqi’s environment
AIP Conf. Proc. 3002, 070045 (2024)
https://doi.org/10.1063/5.0205774
The effect of coated electrodes on electrode wear rate of titanium alloy (grade 1) by electric discharge machining
AIP Conf. Proc. 3002, 070046 (2024)
https://doi.org/10.1063/5.0210118
Optimization of the shot peening time (SPT) in terms of mechanical properties and fatigue life of AA2024-T4
AIP Conf. Proc. 3002, 070048 (2024)
https://doi.org/10.1063/5.0206464
MATERIAL SCIENCE AND MECHANICAL ENGINEERING
Synthesis Ni Doped-ZnO/MWCNTs hybrid by sol-gel method and studying its structural and antibacterial properties
AIP Conf. Proc. 3002, 080001 (2024)
https://doi.org/10.1063/5.0205960
Performance enhancement of evaporative cooling system using desiccant heat exchanger covered with silica gel
AIP Conf. Proc. 3002, 080002 (2024)
https://doi.org/10.1063/5.0206633
Experimental and numerical investigations of the crack angle effect on the shaft strength due to torsional loading
AIP Conf. Proc. 3002, 080003 (2024)
https://doi.org/10.1063/5.0205715
Improving the thermal performance of transformer oil by modifying fin shapes
AIP Conf. Proc. 3002, 080004 (2024)
https://doi.org/10.1063/5.0205923
Numerical investigation of the effect of fin helical pitch on the hydrothermal performance of heat exchanger
AIP Conf. Proc. 3002, 080005 (2024)
https://doi.org/10.1063/5.0206625
Numerical investigation of heat transfer characteristics and flow structure inside sudden expansion channel
AIP Conf. Proc. 3002, 080006 (2024)
https://doi.org/10.1063/5.0206525
Performance enhancement of Iraqi heavy oil flow using parabolic trough solar collector
AIP Conf. Proc. 3002, 080007 (2024)
https://doi.org/10.1063/5.0205988
Wear behaviour for aluminum matrix nanocomposites reinforced with (TiO2+SiO2)
AIP Conf. Proc. 3002, 080008 (2024)
https://doi.org/10.1063/5.0205831
Performance enhancement of the flow balancer in Al-Dora Mill
AIP Conf. Proc. 3002, 080009 (2024)
https://doi.org/10.1063/5.0207321
The effect of bending angle and radius on springback in tube bending according to geometric ratio
AIP Conf. Proc. 3002, 080011 (2024)
https://doi.org/10.1063/5.0205815
Improving the microstructure and mechanical properties of the nanocomposite’s material (Al + ZnO)
AIP Conf. Proc. 3002, 080012 (2024)
https://doi.org/10.1063/5.0208269
Optical and mechanical properties of aluminum oxide nanocoating prepared by pulse laser deposition
AIP Conf. Proc. 3002, 080013 (2024)
https://doi.org/10.1063/5.0206803
Study of effect of dwell bending time and hardness on spring back in L-with stainless steel 304
AIP Conf. Proc. 3002, 080014 (2024)
https://doi.org/10.1063/5.0208056
The effect of dwell time and thickness on springback in L-bending according rolling direction
AIP Conf. Proc. 3002, 080015 (2024)
https://doi.org/10.1063/5.0208060
The effect of working gap and rotational speed on the surface roughness by using boron carbide abrasive powder
AIP Conf. Proc. 3002, 080016 (2024)
https://doi.org/10.1063/5.0206854
Investigation and characterization for polymer matrix composite reinforced with iron filings
AIP Conf. Proc. 3002, 080017 (2024)
https://doi.org/10.1063/5.0209559
Preparation of Nano-alumina by green synthesis and study their structural properties
AIP Conf. Proc. 3002, 080018 (2024)
https://doi.org/10.1063/5.0206458
Mechanical and characterization of nanohalloysite based geopolymer bricks
AIP Conf. Proc. 3002, 080020 (2024)
https://doi.org/10.1063/5.0209689
Practical test and FEA to evaluation of the thickness distribution for octagonal cup generated by deep drawing
AIP Conf. Proc. 3002, 080022 (2024)
https://doi.org/10.1063/5.0205959
Numerical and experimental investigation of fatigue behavior of hot-dip galvanizing steel
AIP Conf. Proc. 3002, 080023 (2024)
https://doi.org/10.1063/5.0205890
The effect of input parameters on material removal rate of CK45 DIN 17200 by electric discharge machining
AIP Conf. Proc. 3002, 080024 (2024)
https://doi.org/10.1063/5.0205869
Vibration and low velocity impact behavior of hybrid and nano composite materials
AIP Conf. Proc. 3002, 080027 (2024)
https://doi.org/10.1063/5.0206340
Elimination of YSZ thermal barrier coatings degradation using an electrophoretic deposition technique
AIP Conf. Proc. 3002, 080028 (2024)
https://doi.org/10.1063/5.0205941
Characteristics and properties of bright nickel plated on aluminum substrate type AA - 1100
AIP Conf. Proc. 3002, 080030 (2024)
https://doi.org/10.1063/5.0206370
Natural filler effect on the mechanical properties behavior of unsaturated polyester composite plate
AIP Conf. Proc. 3002, 080031 (2024)
https://doi.org/10.1063/5.0207535
Case study for heat-waste recovery of the Heydariyeh gas-turbine power plant using S-CO2 brayton cycle
AIP Conf. Proc. 3002, 080032 (2024)
https://doi.org/10.1063/5.0206074
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.
Animal intrusion detection system using Mask RCNN
C. Vijayakumaran, Dakshata, et al.