Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Effects of compressive strength and young modulus of gypsum-ceramic waste on autoclaved aerated concrete (GCW-AAC)
AIP Conf. Proc. 2955, 020001 (2023)
https://doi.org/10.1063/5.0182547
Evaluation of filter penetration for various types of facemask
AIP Conf. Proc. 2955, 020006 (2023)
https://doi.org/10.1063/5.0181396
Deposition of polyaniline (PANI) monolayer onto indium tin oxide using Langmuir Blodgett (LB) technique
AIP Conf. Proc. 2955, 020007 (2023)
https://doi.org/10.1063/5.0181365
Influences of tyre pyrolysis oil, plastic pyrolysis oil, crude palm oil, waste cooking oil and Jatropha oil fuel on diesel combustion
Norrizam Jaat; Muhamad Asri Azizul; Muhammad Firdaus Yaahaya; Amir Khalid; Izuan Amin Ishak; Norshuhaila Mohamed Sunar; Izzuddin Zaman
AIP Conf. Proc. 2955, 020008 (2023)
https://doi.org/10.1063/5.0184839
Development of Muar driving cycle based on real-world driving conditions
Shaiful Fadzil Zainal Abidin; Amir Khalid; Nur Syamin Ikhmal Shafiruddin; Che Wan Mohd Naim Che Haimai; Izzarief Zahari; Rifqi Irzuan Abdul Jalal; Mohd Azman Abas
AIP Conf. Proc. 2955, 020009 (2023)
https://doi.org/10.1063/5.0184840
A review on investigation of ammonia biodiesel fuel blends in micro gas turbine using simulation and modeling
AIP Conf. Proc. 2955, 020010 (2023)
https://doi.org/10.1063/5.0184837
Primary and sustainable energy scenario in Malaysia
AIP Conf. Proc. 2955, 020012 (2023)
https://doi.org/10.1063/5.0181490
Development of automation and energy monitoring system of air-conditioning & mechanical ventilation (AEMS-ACMV) for 27 years old office building at Terengganu, Malaysia
Zamri Noranai; Mohd Azahari Razali; Muhammad Adib Afham Abdullah; Ramhuzaini Abd Rahman; Maizul Ishak; Mohamad Md Som; Azli Bin Yusop; Makeen Mohd Amin; Norhadiman Abdul Hadi
AIP Conf. Proc. 2955, 020014 (2023)
https://doi.org/10.1063/5.0181514
Feasibility study of worker safety at highway emergency lane
Musfirah Mustaffa; Suhaimi Hassan; Muhammad Syahmi Mohammad Hisyammudden; Mohamad Zhairul Iqumal Jumari; Mohamad Amirul Mat Nadir; N. M. Yusof; M. S. Ikhsan; Maznan Ismon; Hanis Zakaria; Omar Mohd Faizan Marwah; M. S. Yusof; Nik Nazmi Amir Nik Aziz; Mohd Farizwan Azmil Hakim; Muhammad Fakrul Shakirin Abdul Rahman; Ahmad Faidhi Tabri; Mohd Azham Azmi
AIP Conf. Proc. 2955, 020015 (2023)
https://doi.org/10.1063/5.0181452
Case study: Relation between room temperature and WCPU control temperature for office building at Kemaman
Mohd Azahari Bin Razali; Irfan Bin Mohd Jailanee; Aslam Bin Abdullah; Jamiluddin Bin Jaafar; Makeen Bin Mohd Amin; Norhadiman Bin Abdul Hadi
AIP Conf. Proc. 2955, 020017 (2023)
https://doi.org/10.1063/5.0181516
A review of reliability tests on safety technologies
Muhammad Syahmi Bin Mohammad Hisyammuden; Suhaimi Hassan; Musfirah Binti Mustaffa; Mohamad Zhairul Iqumal Jumari; Mohamad Amirul Mat Nadir; N. M. Yusof; M. S. Ikhsan; Maznan Ismon; Hanis Zakaria; Omar Mohd Faizan Marwah; M. S. Yusof; Nik Nazmi Amir Nik Aziz; Mohd Farizwan Azmil Hakim; Muhammad Fakrul Shakirin Abdul Rahman; Ahmad Faidhi Tabri; Mohd Azham Azmi
AIP Conf. Proc. 2955, 020018 (2023)
https://doi.org/10.1063/5.0181454
Development of physiological mouse for anxiety disorder identification system
Faridah Hanim Binti Mohd Noh; Wan Mohd Amin Khalili Bin Wan Kamri; Ahmad Hawari Bin Zakaria; Nor Arina Binti Gimin; Iqbal Bin Safa'at; Muhamad Faizal Bin Yaakub; Nor Shahida Binti Mohd Shah; Sumaiya Binti Mashori
AIP Conf. Proc. 2955, 020019 (2023)
https://doi.org/10.1063/5.0181478
Development of internet of things (IoT) system for food supply data in small-medium enterprise (SME)
AIP Conf. Proc. 2955, 020020 (2023)
https://doi.org/10.1063/5.0183454
Renewable energy challenges in Somalia: A case study of wind-solar production
AIP Conf. Proc. 2955, 020022 (2023)
https://doi.org/10.1063/5.0181399
Optimization machining parameters in pocket milling using genetic algorithm and mastercam
AIP Conf. Proc. 2955, 020024 (2023)
https://doi.org/10.1063/5.0181742
In-place analysis and load formulation of BAJT-H fixed offshore jacket platform
AIP Conf. Proc. 2955, 020026 (2023)
https://doi.org/10.1063/5.0181518
Mechanical properties of rice husk silica/alumina reinforced aluminium alloy matrix composite produced by cold compaction process
Nor Asmalinda Kamaruddin; Nurul Fitriah Nasir; Noradila Abdul Latif; Mohd Fikrey Roslan; Nurul Farahin Mohd Joharuddin
AIP Conf. Proc. 2955, 020027 (2023)
https://doi.org/10.1063/5.0181400
Investigation on rice husk and bamboo leaf ashes reinforcement on mechanical and physical properties for aluminium matrix composites (AMC)
Farah Nur Dini Ahmad Sharainon; Noradila Abdul Latif; Nurul Farahin Mohd Joharudin; Nurul Fitriah Nasir; Mohammad Sukri Mustapa
AIP Conf. Proc. 2955, 020028 (2023)
https://doi.org/10.1063/5.0181374
Effect of optimizing FSW parameters on tensile strength of welded joint using milling machine
AIP Conf. Proc. 2955, 020029 (2023)
https://doi.org/10.1063/5.0181678
Biocompatibility and strength tests of PLA/SS316L composite material for orthopedic implant applications utilizing the 3D printing technique
Shazarel Shamsudin; Abdulaziz Ali; Khairu Kamarudin; Sami Al-Alimi; Yahya M. Altharan; Mustafa Ibrahim
AIP Conf. Proc. 2955, 020030 (2023)
https://doi.org/10.1063/5.0183829
Prediction of heat distribution on brain malignant tumor using hyperthermia therapy
Saddam Kamarudin; Ishkrizat Taib; Maliki Adnan; Fitriah Nasir; Ahmad Mubarak Tajul Ariffin; Nor Adrian Nor Salim; Nofrizal Idris Darlis; Mohd Noor Abdullah; Ali Kamil
AIP Conf. Proc. 2955, 020031 (2023)
https://doi.org/10.1063/5.0183646
Moisture-induced deformation of 3D printed hygro-responsive bi-material actuators
AIP Conf. Proc. 2955, 020033 (2023)
https://doi.org/10.1063/5.0182130
Numerical modelling of sustainable bumper beam system in automotive crash management system application
AIP Conf. Proc. 2955, 020034 (2023)
https://doi.org/10.1063/5.0181470
Predicting corrosion under insulation (CUI) by characterized of corrosion product
AIP Conf. Proc. 2955, 020036 (2023)
https://doi.org/10.1063/5.0188903
Identifying discontinuities of 6״carbon steel pipe using advanced ultrasonic techniques
AIP Conf. Proc. 2955, 020037 (2023)
https://doi.org/10.1063/5.0186588
Visibility of corrosion cracking properties by replication method
AIP Conf. Proc. 2955, 020039 (2023)
https://doi.org/10.1063/5.0186590
Potential use of sandwich structure for biomedical applications: A review
AIP Conf. Proc. 2955, 020040 (2023)
https://doi.org/10.1063/5.0182436
A method for calibration of a particle concentration measurement system with artificial intelligence
AIP Conf. Proc. 2955, 020041 (2023)
https://doi.org/10.1063/5.0185050
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
With synthetic data towards part recognition generalized beyond the training instances
Paul Koch, Marian Schlüter, et al.