Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Issues

Volume 2899, Issue 1
13 September 2023
Issue Cover
PHYSICAL MESOMECHANICS OF CONDENSED MATTER: Physical Principles of Multiscale Structure Formation and the Mechanisms of Nonlinear Behavior: MESO2022
5–8 September 2022
Tomsk, Russia
All Issues
In this Issue

PRELIMINARY

Preface: International Conference “Physical Mesomechanics of Condensed Matter: Physical Principles of Multiscale Structure Formation and the Mechanisms of Nonlinear Behavior” (MESO 2022)
AIP Conf. Proc. 2899, 010001 (2023) https://doi.org/10.1063/12.0019904
View articletitled, Preface: International Conference “Physical Mesomechanics of Condensed Matter: Physical Principles of Multiscale Structure Formation and the Mechanisms of Nonlinear Behavior” (MESO 2022)
Open the PDF for in another window

ARTICLES

Formation of zones of stable deformation localization in welded joints of structural steel, characteristics of non-destructive testing
Nikolay Ababkov; Vladimir Danilov; Alexander Smirnov; Vladimir Parhomenko
AIP Conf. Proc. 2899, 020001 (2023) https://doi.org/10.1063/5.0163404
View articletitled, Formation of zones of stable deformation localization in welded joints of structural steel, characteristics of non-destructive testing
Open the PDF for in another window
Thermodynamic simulation of Portland cement hydration with different water content
Yuri Abzaev; Sergey Korobkov; Vladimir Starenchenko
AIP Conf. Proc. 2899, 020002 (2023) https://doi.org/10.1063/5.0163688
View articletitled, Thermodynamic simulation of Portland cement hydration with different water content
Open the PDF for in another window
The adaptation of the Drucker-Prager elastic-plastic model for analysis of the stress state in the lithosphere
A. Zh. Akhmetov; I. Yu. Smolin
AIP Conf. Proc. 2899, 020003 (2023) https://doi.org/10.1063/5.0164969
View articletitled, The adaptation of the Drucker-Prager elastic-plastic model for analysis of the stress state in the lithosphere
Open the PDF for in another window
Influence of metamaterial rod length on its rotation behavior
L. R. Akhmetshin
AIP Conf. Proc. 2899, 020004 (2023) https://doi.org/10.1063/5.0163442
View articletitled, Influence of metamaterial rod length on its rotation behavior
Open the PDF for in another window
The structure of Al-10Si-2Cu alloy fractured under plastic deformation caused by tensile stressing
Krestina V. Aksenova; Dmitrii V. Zaguliaev; Yurii F. Ivanov; Anatolii A. Klopotov; Damir F. Yakupov; Anton M. Ustinov
AIP Conf. Proc. 2899, 020005 (2023) https://doi.org/10.1063/5.0163069
View articletitled, The structure of Al-10Si-2Cu alloy fractured under plastic deformation caused by tensile stressing
Open the PDF for in another window
Influence of the FeO presence in the contact space on the character of dry sliding of metals under electric current
M. I. Aleutdinova; V. V. Fadin
AIP Conf. Proc. 2899, 020006 (2023) https://doi.org/10.1063/5.0162747
View articletitled, Influence of the FeO presence in the contact space on the character of dry sliding of metals under electric current
Open the PDF for in another window
Formations of dissimilar lap weld of steel and titanium alloy by friction stir welding
A. I. Amirov; A. V. Chumaevskii; V. R. Utyaganova; А. V. Gusarova
AIP Conf. Proc. 2899, 020007 (2023) https://doi.org/10.1063/5.0169566
View articletitled, Formations of dissimilar lap weld of steel and titanium alloy by friction stir welding
Open the PDF for in another window
Numerical modeling and kinematic analysis of strike-slip faulting in the sedimentary layer
R. A. Bakeev; Yu. P. Stefanov
AIP Conf. Proc. 2899, 020008 (2023) https://doi.org/10.1063/5.0163060
View articletitled, Numerical modeling and kinematic analysis of strike-slip faulting in the sedimentary layer
Open the PDF for in another window
Oxygen absorption in doped Ti-Al alloys
Alexander V. Bakulin; Lora S. Chumakova; Ekaterina V. Matyskina; Svetlana E. Kulkova
AIP Conf. Proc. 2899, 020009 (2023) https://doi.org/10.1063/5.0162754
View articletitled, Oxygen absorption in doped Ti-Al alloys
Open the PDF for in another window
Damage analysis in a composite by X-ray tomography methods using the structure tensor
Mikhail Bannikov; Yuriy Bayandin; Oleg Naimark; Eduard Pruuel; Konstantin Kuper
AIP Conf. Proc. 2899, 020010 (2023) https://doi.org/10.1063/5.0162973
View articletitled, Damage analysis in a composite by X-ray tomography methods using the structure tensor
Open the PDF for in another window
Acoustic emission at the fatigue crack initiation and propagation in aluminum alloy 1163 with micro-arc oxidation coating
F. Bao; T. I. Bashkova; L. Lyu
AIP Conf. Proc. 2899, 020011 (2023) https://doi.org/10.1063/5.0163781
View articletitled, Acoustic emission at the fatigue crack initiation and propagation in aluminum alloy 1163 with micro-arc oxidation coating
Open the PDF for in another window
Variation of transverse strain coefficient in deformed metals
Svetlana A. Barannikova; Polina V. Iskhakova
AIP Conf. Proc. 2899, 020012 (2023) https://doi.org/10.1063/5.0162718
View articletitled, Variation of transverse strain coefficient in deformed metals
Open the PDF for in another window
Cluster analysis of the acoustic emission signals registered during bending deformation of FGRP
O. V. Bashkov; A. A. Bryansky
AIP Conf. Proc. 2899, 020013 (2023) https://doi.org/10.1063/5.0163780
View articletitled, Cluster analysis of the acoustic emission signals registered during bending deformation of FGRP
Open the PDF for in another window
Modeling of fracture of reinforced and unreinforced concrete structures under impact loads
S. P. Batuev; P. A. Radchenko; A. V. Radchenko
AIP Conf. Proc. 2899, 020014 (2023) https://doi.org/10.1063/5.0163769
View articletitled, Modeling of fracture of reinforced and unreinforced concrete structures under impact loads
Open the PDF for in another window
Numerical studies of the behavior of an orthotropic organic plastic barrier under dynamic loads
S. P. Batuev; A. V. Radchenko; P. A. Radchenko
AIP Conf. Proc. 2899, 020015 (2023) https://doi.org/10.1063/5.0163767
View articletitled, Numerical studies of the behavior of an orthotropic organic plastic barrier under dynamic loads
Open the PDF for in another window
An analogy of the sensitivity for initial conditions of natural and technical objects to ensure the properties of materials
Alexander Berman; Olga Nikolaychuk
AIP Conf. Proc. 2899, 020016 (2023) https://doi.org/10.1063/5.0162826
View articletitled, An analogy of the sensitivity for initial conditions of natural and technical objects to ensure the properties of materials
Open the PDF for in another window
Synthesis of β–SiAlON by plasma chemical sintering based on AlN and Si3N4 components
Konstantin Bezukhov; Victor Vlasov; Anatolii Klopotov; Gennadiy Volokitin; Yuriy Sarkisov; Nikolay Golobokov; Yuriy Kakushkin
AIP Conf. Proc. 2899, 020017 (2023) https://doi.org/10.1063/5.0162880
View articletitled, Synthesis of β–SiAlON by plasma chemical sintering based on AlN and Si<sub>3</sub>N<sub>4</sub> components
Open the PDF for in another window
Effect of aging temperature on structure and mechanical properties of nanocrystalline Ti-50.9 at.% Nialloy
S. M. Bitter; S. L. Girsova; T. M. Poletika; K. A. Zheronkina
AIP Conf. Proc. 2899, 020018 (2023) https://doi.org/10.1063/5.0163076
View articletitled, Effect of aging temperature on structure and mechanical properties of nanocrystalline Ti-50.9 at.% Nialloy
Open the PDF for in another window
Microstructure evolution and carbide precipitation in low alloyed 0.2-0.3C steels during tempering
S. Borisov; A. Pikina; S. Gaidar; R. Kaibyshev
AIP Conf. Proc. 2899, 020019 (2023) https://doi.org/10.1063/5.0164344
View articletitled, Microstructure evolution and carbide precipitation in low alloyed 0.2-0.3C steels during tempering
Open the PDF for in another window
The precipitation modelling and martensitic transformation in a medium carbon steels with 0.34-0.44%C
Yuliya Borisova; Alexander Pydrin; Sergey Gaidar; Roman Mishnev
AIP Conf. Proc. 2899, 020020 (2023) https://doi.org/10.1063/5.0163494
View articletitled, The precipitation modelling and martensitic transformation in a medium carbon steels with 0.34-0.44%C
Open the PDF for in another window
Study of the physical and mechanical characteristics of photoluminescent composite materials based on epoxy resin
T. A. Brusentseva; S. E. Lukin
AIP Conf. Proc. 2899, 020021 (2023) https://doi.org/10.1063/5.0163073
View articletitled, Study of the physical and mechanical characteristics of photoluminescent composite materials based on epoxy resin
Open the PDF for in another window
Electrical conductivity of PEEK/carbon fiber composites modified by metal and carbon microfillers
M. V. Burkov; A. V. Eremin
AIP Conf. Proc. 2899, 020022 (2023) https://doi.org/10.1063/5.0163258
View articletitled, Electrical conductivity of PEEK/carbon fiber composites modified by metal and carbon microfillers
Open the PDF for in another window
Structure and properties of multicomponent ceramics (Hf,Zr,Ti,Nb,Mo)C
Alexander G. Burlachenko; Nikolai D. Kulagin; Yuriy A. Mirovoy; Alexey A. Neiman; Elena S. Dedova; Svetlana P. Buyakova
AIP Conf. Proc. 2899, 020023 (2023) https://doi.org/10.1063/5.0169571
View articletitled, Structure and properties of multicomponent ceramics (Hf,Zr,Ti,Nb,Mo)C
Open the PDF for in another window
Kinetics of the microstructure during isothermal solid-phase sintering of porous ceramics
Ales Buyakov; Vasiliy Shmakov
AIP Conf. Proc. 2899, 020024 (2023) https://doi.org/10.1063/5.0162732
View articletitled, Kinetics of the microstructure during isothermal solid-phase sintering of porous ceramics
Open the PDF for in another window
Study of plastic deformation of wear-resistant bimetal materials
Svetlana P. Buyakova; Konstantin N. Kayurov; Svetlana A. Barannikova
AIP Conf. Proc. 2899, 020025 (2023) https://doi.org/10.1063/5.0162719
View articletitled, Study of plastic deformation of wear-resistant bimetal materials
Open the PDF for in another window
Comparison of heterogeneous material models for solving impact spall fracture problems
A. E. Buzyurkin; A. K. Kravchenko; A. E. Kraus; E. I. Kraus; I. I. Shabalin
AIP Conf. Proc. 2899, 020026 (2023) https://doi.org/10.1063/5.0162710
View articletitled, Comparison of heterogeneous material models for solving impact spall fracture problems
Open the PDF for in another window
Influence of sliding vector of long rod on ricochet from heterogeneous plates
A. E. Buzyurkin; A. K. Kravchenko; A. E. Kraus; E. I. Kraus; I. I. Shabalin
AIP Conf. Proc. 2899, 020027 (2023) https://doi.org/10.1063/5.0162711
View articletitled, Influence of sliding vector of long rod on ricochet from heterogeneous plates
Open the PDF for in another window
Characterization of electrical potential and properties of calcium phosphate coating containing zinc oxide nanoparticles
V. V. Chebodaeva; M. B. Sedelnikova; A. L. Zharin; O. V. Bakina; I. A. Khlusov; Yu. P. Sharkeev
AIP Conf. Proc. 2899, 020028 (2023) https://doi.org/10.1063/5.0162733
View articletitled, Characterization of electrical potential and properties of calcium phosphate coating containing zinc oxide nanoparticles
Open the PDF for in another window
Analysis of deformed state at the interface of an elastic body and ideal fluid
Nadezda Chertova
AIP Conf. Proc. 2899, 020029 (2023) https://doi.org/10.1063/5.0162858
View articletitled, Analysis of deformed state at the interface of an elastic body and ideal fluid
Open the PDF for in another window
Modeling of ultrasonic impact of different intensity on the knee joint
Artem O. Chirkov; Galina M. Eremina; Alexey Y. Smolin
AIP Conf. Proc. 2899, 020030 (2023) https://doi.org/10.1063/5.0163755
View articletitled, Modeling of ultrasonic impact of different intensity on the knee joint
Open the PDF for in another window
Influence of the degree of mutual solubility on the structure organization and formation of defects in obtaining metal matrix composites by electron beam wire-feed additive technology
A. V. Chumaevskii; A. V. Gusarova; K. S. Osipovich; A. P. Zykova; V. A. Beloborodov; A. O. Panfilov; S. Yu. Nikonov; D. A. Gurianov
AIP Conf. Proc. 2899, 020031 (2023) https://doi.org/10.1063/5.0163989
View articletitled, Influence of the degree of mutual solubility on the structure organization and formation of defects in obtaining metal matrix composites by electron beam wire-feed additive technology
Open the PDF for in another window
Influence of the method of feeding components into the melt pool when producing composite materials by electron beam additive technology on the inhomogeneity of the distribution of strengthening phases
A. V. Chumaevskii; A. V. Gusarova; V. R. Utyaganova; L. L. Zhukov; N. N. Shamarin; P. S. Sokolov; S. Yu. Nikonov; D. A. Gurianov
AIP Conf. Proc. 2899, 020032 (2023) https://doi.org/10.1063/5.0163990
View articletitled, Influence of the method of feeding components into the melt pool when producing composite materials by electron beam additive technology on the inhomogeneity of the distribution of strengthening phases
Open the PDF for in another window
Local modification of steel by adding Tungsten powder in electron beam additive manufacturing
A. V. Chumaevskii; N. N. Shamarin; V. A. Beloborodov; P. S. Sokolov; A. V. Gusarova; D. A. Gurianov; E. N. Moskvichev; E. O. Knyazhev
AIP Conf. Proc. 2899, 020033 (2023) https://doi.org/10.1063/5.0163988
View articletitled, Local modification of steel by adding Tungsten powder in electron beam additive manufacturing
Open the PDF for in another window
Regularities of structure formation and composition heterogeneity of composite material samples based on aluminum-manganese bronze and nickel alloy
A. V. Chumaevskii; A. P. Zykova; A. O. Panfilov; L. L. Zhukov; A. I. Amirov; V. E. Rubtsov; S. Yu. Nikonov; D. A. Gurianov
AIP Conf. Proc. 2899, 020034 (2023) https://doi.org/10.1063/5.0163983
View articletitled, Regularities of structure formation and composition heterogeneity of composite material samples based on aluminum-manganese bronze and nickel alloy
Open the PDF for in another window
Structure organization and defect formation in composite materials based on copper and aluminum alloy produced by electron beam additive manufacturing
A. V. Chumaevskii; A. V. Gusarova; A. O. Panfilov; L. L. Zhukov; A. P. Zykova; V. E. Rubtsov; S. Yu. Nikonov; D. A. Gurianov
AIP Conf. Proc. 2899, 020035 (2023) https://doi.org/10.1063/5.0163987
View articletitled, Structure organization and defect formation in composite materials based on copper and aluminum alloy produced by electron beam additive manufacturing
Open the PDF for in another window
Surface hardening of aluminum-magnesium alloy by introducing a small addition of copper powder during friction stir processing
A. V. Chumaevskii; A. V. Gusarova; L. L. Zhukov; V. A. Beloborodov; A. P. Zykova; P. S. Sokolov; D. A. Gurianov; E. O. Knyazhev
AIP Conf. Proc. 2899, 020036 (2023) https://doi.org/10.1063/5.0163986
View articletitled, Surface hardening of aluminum-magnesium alloy by introducing a small addition of copper powder during friction stir processing
Open the PDF for in another window
Using the method of two-wire melt pool feeding system to produce bimetallic elements of functionally graded structures
A. V. Chumaevskii; D. A. Gurianov; K. S. Osipovich; P. S. Sokolov; V. A. Beloborodov; V. M. Semenchuk; S. Yu. Nikonov; E. O. Knyazhev
AIP Conf. Proc. 2899, 020037 (2023) https://doi.org/10.1063/5.0163985
View articletitled, Using the method of two-wire melt pool feeding system to produce bimetallic elements of functionally graded structures
Open the PDF for in another window
Study of corrosion behaviour of TiNi alloy with high Ni content with different microstructure in acid solutions
Anna Churakova; Elina Kayumova
AIP Conf. Proc. 2899, 020038 (2023) https://doi.org/10.1063/5.0163193
View articletitled, Study of corrosion behaviour of TiNi alloy with high Ni content with different microstructure in acid solutions
Open the PDF for in another window
The temperature effect on the Lüders deformation in ARMCO-iron
Vladimir Danilov; Vadim Gorbatenko; Dina Orlova; Lidiya Danilova
AIP Conf. Proc. 2899, 020039 (2023) https://doi.org/10.1063/5.0163093
View articletitled, The temperature effect on the Lüders deformation in ARMCO-iron
Open the PDF for in another window
Surface relief deformation and microstructure changes during Luders band propagation in ARMCO iron at elevated and room temperatures
L. V. Danilova; V. V. Gorbatenko; A. V. Bochkareva
AIP Conf. Proc. 2899, 020040 (2023) https://doi.org/10.1063/5.0163096
View articletitled, Surface relief deformation and microstructure changes during Luders band propagation in ARMCO iron at elevated and room temperatures
Open the PDF for in another window
Oxidation behavior of multicomponent carbide (Ti,Zr,Hf)C at temperatures 25-1200 °C
Elena S. Dedova; Nikolai D. Kulagin; Alexander G. Burlachenko; Yuriy A. Mirovoy; Alexey A. Neiman; Svetlana P. Buyakova
AIP Conf. Proc. 2899, 020041 (2023) https://doi.org/10.1063/5.0163063
View articletitled, Oxidation behavior of multicomponent carbide (Ti,Zr,Hf)C at temperatures 25-1200 °C
Open the PDF for in another window
Molecular dynamics study of the strength properties of TixAl1-xN coatings
A. I. Dmitriev; A. Yu. Nikonov; A. R. Shugurov
AIP Conf. Proc. 2899, 020042 (2023) https://doi.org/10.1063/5.0163587
View articletitled, Molecular dynamics study of the strength properties of Ti<sub>x</sub>Al<sub>1-x</sub>N coatings
Open the PDF for in another window
Micro-and macrostructure of AA ER4043/nickel alloy Udimet-500 walls fabricated by wire-feed electron-beam additive manufacturing
A. R. Dobrovolsky; A. V. Chumaevskii; S. Yu. Nikonov; E. N. Moskvichev; A. P. Zykova; S. Yu. Tarasov
AIP Conf. Proc. 2899, 020043 (2023) https://doi.org/10.1063/5.0164482
View articletitled, Micro-and macrostructure of AA ER4043/nickel alloy Udimet-500 walls fabricated by wire-feed electron-beam additive manufacturing
Open the PDF for in another window
Modification of pipeline steels surface structure by vacuum methods to improve corrosion resistance
T. Dorofeeva; M. Fedorishcheva; T. Gubaidulina; O. Sergeev; A. Sungatulin; M. Dorofeeva; M. Kalashnikov; V. Sergeev
AIP Conf. Proc. 2899, 020044 (2023) https://doi.org/10.1063/5.0163678
View articletitled, Modification of pipeline steels surface structure by vacuum methods to improve corrosion resistance
Open the PDF for in another window
Morphology, topographical parameters, and deformation behavior of the Ti-Ni-Nb and Ti-Ni-Nb-Si surface alloys synthesized on the NiTi-substrate
Filipp D’Yachenko; Ludmila Meisner; Evgeniy Yakovlev; Asiya Atovullaeva
AIP Conf. Proc. 2899, 020045 (2023) https://doi.org/10.1063/5.0163695
View articletitled, Morphology, topographical parameters, and deformation behavior of the Ti-Ni-Nb and Ti-Ni-Nb-Si surface alloys synthesized on the NiTi-substrate
Open the PDF for in another window
Fabrication of porous composites from Ti3AlC2 and Al2O3 for potential separation membrane supports
A. K. Dyussambayev; M. G. Krinitsyn; D. G. Krotkevich; M. O. Koptsev; E. B. Kashkarov
AIP Conf. Proc. 2899, 020046 (2023) https://doi.org/10.1063/5.0169591
View articletitled, Fabrication of porous composites from Ti<sub>3</sub>AlC<sub>2</sub> and Al<sub>2</sub>O<sub>3</sub> for potential separation membrane supports
Open the PDF for in another window
Friction stir welding of steel-aluminum bimetals using a nickel-based superalloy tool
A. A. Eliseev; A. I. Amirov
AIP Conf. Proc. 2899, 020047 (2023) https://doi.org/10.1063/5.0162756
View articletitled, Friction stir welding of steel-aluminum bimetals using a nickel-based superalloy tool
Open the PDF for in another window
Numerical approach to pillars stability assessment in longwall mining of inclined seams
Mikhail Eremin; Alexey Peryshkin; Artyom Chirkov; Albert Pazhin; Valentina Zimina; Ayan Akhmetov
AIP Conf. Proc. 2899, 020048 (2023) https://doi.org/10.1063/5.0162734
View articletitled, Numerical approach to pillars stability assessment in longwall mining of inclined seams
Open the PDF for in another window
Underground coal mining: Brief overview of some related problems, solutions
M. O. Eremin; A. A. Pazhin; A. O. Chirkov; A. Yu. Peryshkin; V. A. Zimina; A. Zh. Akhmetov
AIP Conf. Proc. 2899, 020049 (2023) https://doi.org/10.1063/5.0163686
View articletitled, Underground coal mining: Brief overview of some related problems, solutions
Open the PDF for in another window
Development of a numerical model of the hip joint
Galina M. Eremina; Alexey Y. Smolin
AIP Conf. Proc. 2899, 020050 (2023) https://doi.org/10.1063/5.0163701
View articletitled, Development of a numerical model of the hip joint
Open the PDF for in another window
Development of a numerical model of the lumbar spine
Galina M. Eremina; Alexey Y. Smolin
AIP Conf. Proc. 2899, 020051 (2023) https://doi.org/10.1063/5.0163702
View articletitled, Development of a numerical model of the lumbar spine
Open the PDF for in another window
Investigation of the effect of deposition conditions of CrN/ZrN coatings on their mechanical properties and internal stress
A. Filippov; N. Shamarin; A. Vorontsov; O. Novitskaya
AIP Conf. Proc. 2899, 020052 (2023) https://doi.org/10.1063/5.0162728
View articletitled, Investigation of the effect of deposition conditions of CrN/ZrN coatings on their mechanical properties and internal stress
Open the PDF for in another window
The structure of harderian glands after the polymer films implantation
Ekaterina O. Filippova; Anna D. Zhuravleva
AIP Conf. Proc. 2899, 020053 (2023) https://doi.org/10.1063/5.0169592
View articletitled, The structure of harderian glands after the polymer films implantation
Open the PDF for in another window
Influence of electron beam additive manufacturing process features on the fine material structure of a nickel-based superalloy products
S. V. Fortuna; D. A. Gurianov; S. Yu. Nikonov
AIP Conf. Proc. 2899, 020054 (2023) https://doi.org/10.1063/5.0169589
View articletitled, Influence of electron beam additive manufacturing process features on the fine material structure of a nickel-based superalloy products
Open the PDF for in another window
Abnormal R-phase transformation behavior in aged nanocrystalline Ti-50.9 at. % Ni alloy
S. L. Girsova; S. M. Bitter; T. M. Poletika; K. A. Zheronkina
AIP Conf. Proc. 2899, 020055 (2023) https://doi.org/10.1063/5.0163079
View articletitled, Abnormal R-phase transformation behavior in aged nanocrystalline Ti-50.9 at. % Ni alloy
Open the PDF for in another window
Influence of SiC ceramic fiber reinforcement on wear resistance of metal-matrix composite formed by laser surface cladding
А. А. Golyshev
AIP Conf. Proc. 2899, 020056 (2023) https://doi.org/10.1063/5.0163735
View articletitled, Influence of SiC ceramic fiber reinforcement on wear resistance of metal-matrix composite formed by laser surface cladding
Open the PDF for in another window
Physical and mechanical foundations of the theory of inelastic deformation of solids
Yu. V. Grinyaev
AIP Conf. Proc. 2899, 020057 (2023) https://doi.org/10.1063/5.0163925
View articletitled, Physical and mechanical foundations of the theory of inelastic deformation of solids
Open the PDF for in another window
Gradients of structural-phase state of rail head after ultra long-term operation
V. E. Gromov; Yu. F. Ivanov; M. O. Efimov; A. A. Yuriev; R. V. Kuznetsov; Yu. A. Shliarova; I. A. Panchenko; V. E. Kormyshev
AIP Conf. Proc. 2899, 020058 (2023) https://doi.org/10.1063/5.0163398
View articletitled, Gradients of structural-phase state of rail head after ultra long-term operation
Open the PDF for in another window
Direct metal deposition of a nickel-based composite material with substrate preheat for obtaining a wear-resistant coating
M. Gulov; S. Konstantinov
AIP Conf. Proc. 2899, 020059 (2023) https://doi.org/10.1063/5.0162906
View articletitled, Direct metal deposition of a nickel-based composite material with substrate preheat for obtaining a wear-resistant coating
Open the PDF for in another window
The role of solid-lubricant fillers on enhancing antifriction properties of polyethersulphone-based composites
Ch. He; D. G. Buslovich; L. A. Kornienko; S. V. Panin
AIP Conf. Proc. 2899, 020060 (2023) https://doi.org/10.1063/5.0162775
View articletitled, The role of solid-lubricant fillers on enhancing antifriction properties of polyethersulphone-based composites
Open the PDF for in another window
An AFM study of the mechanical properties and structural characteristics of a carbonized nanolayer produced by ion-plasma treatment of a polyurethane surface at different ion-beam incidence angles
Y. N. Ivanov; V. S. Chudinov; I. N. Shardakov; A. Yu. Belyaev; I. A. Morozov
AIP Conf. Proc. 2899, 020061 (2023) https://doi.org/10.1063/5.0163085
View articletitled, An AFM study of the mechanical properties and structural characteristics of a carbonized nanolayer produced by ion-plasma treatment of a polyurethane surface at different ion-beam incidence angles
Open the PDF for in another window
Issues with tensile testing of additively manufactured coarse-grained titanium alloy components
K. N. Kalashnikov
AIP Conf. Proc. 2899, 020062 (2023) https://doi.org/10.1063/5.0169804
View articletitled, Issues with tensile testing of additively manufactured coarse-grained titanium alloy components
Open the PDF for in another window
Mechanical testing of spherical tank workpiece made from Ti-6Al-4V by wire-based additive manufacturing
K. N. Kalashnikov; T. A. Kalashnikova
AIP Conf. Proc. 2899, 020063 (2023) https://doi.org/10.1063/5.0169805
View articletitled, Mechanical testing of spherical tank workpiece made from Ti-6Al-4V by wire-based additive manufacturing
Open the PDF for in another window
Features of the material structure in the tool effect area during friction stir processing of additively manufactured Ti-6Al-4V alloy workpieces
T. A. Kalashnikova; A. M. Cheremnov; A. A. Eliseev; D. A. Gurianov; K. N. Kalashnikov
AIP Conf. Proc. 2899, 020064 (2023) https://doi.org/10.1063/5.0169803
View articletitled, Features of the material structure in the tool effect area during friction stir processing of additively manufactured Ti-6Al-4V alloy workpieces
Open the PDF for in another window
Microstructure, phase and elemental compositions of MAO Zn-Si-containing calcium phosphate coatings
E. A. Kazantseva; E. G. Komarova; M. A. Khimich; I. A. Glukhov
AIP Conf. Proc. 2899, 020065 (2023) https://doi.org/10.1063/5.0162722
View articletitled, Microstructure, phase and elemental compositions of MAO Zn-Si-containing calcium phosphate coatings
Open the PDF for in another window
Calculations of the diffusion coefficients in two phase vapor – Liquid system by the molecular dynamics method
Georgii V. Kharlamov
AIP Conf. Proc. 2899, 020066 (2023) https://doi.org/10.1063/5.0163087
View articletitled, Calculations of the diffusion coefficients in two phase vapor – Liquid system by the molecular dynamics method
Open the PDF for in another window
Thermal activation of dry sliding friction at the nano-scale
Rasoul Kheiri; Alexey A. Tsukanov
AIP Conf. Proc. 2899, 020067 (2023) https://doi.org/10.1063/5.0163220
View articletitled, Thermal activation of dry sliding friction at the nano-scale
Open the PDF for in another window
The velocity dependence of dry sliding friction at the nano-scale
Rasoul Kheiri; Alexey A. Tsukanov; Nikolai V. Brilliantov
AIP Conf. Proc. 2899, 020068 (2023) https://doi.org/10.1063/5.0163223
View articletitled, The velocity dependence of dry sliding friction at the nano-scale
Open the PDF for in another window
Influence of scanning velocity on porosity, microstructure, elemental and phase composition of Ti-Fe and Ti-Fe-Cu samples formed by laser powder bed fusion
Margarita A. Khimich; Egor A. Ibragimov; Alexey A. Saprykin
AIP Conf. Proc. 2899, 020069 (2023) https://doi.org/10.1063/5.0163023
View articletitled, Influence of scanning velocity on porosity, microstructure, elemental and phase composition of Ti-Fe and Ti-Fe-Cu samples formed by laser powder bed fusion
Open the PDF for in another window
Powder feedstock from raw materials for laser powder bed fusion
Margarita A. Khimich; Egor A. Ibragimov; Alexey A. Saprykin
AIP Conf. Proc. 2899, 020070 (2023) https://doi.org/10.1063/5.0163025
View articletitled, Powder feedstock from raw materials for laser powder bed fusion
Open the PDF for in another window
Evolution of the grain structure and dislocation substructure of austenitic steel EK-164 as a result of thermomechanical treatments
A. V. Kim; S. A. Akkuzin; I. Yu. Litovchenko
AIP Conf. Proc. 2899, 020071 (2023) https://doi.org/10.1063/5.0163091
View articletitled, Evolution of the grain structure and dislocation substructure of austenitic steel EK-164 as a result of thermomechanical treatments
Open the PDF for in another window
Towards optimization of dissimilar friction stir welding of aluminum and titanium
Alexander Kalinenko; Pavel Dolzhenko; Sergey Malopheyev; Sergey Mironov
AIP Conf. Proc. 2899, 020072 (2023) https://doi.org/10.1063/5.0162744
View articletitled, Towards optimization of dissimilar friction stir welding of aluminum and titanium
Open the PDF for in another window
Analysis of the structure and mechanism of destruction of implants manufactured by the additive method
Y. N. Koemets; V. P. Kuznetsov; N. V. Kazantseva; M. S. Karabanalov; O. A. Koemets; А. А. Yemanov
AIP Conf. Proc. 2899, 020073 (2023) https://doi.org/10.1063/5.0163737
View articletitled, Analysis of the structure and mechanism of destruction of implants manufactured by the additive method
Open the PDF for in another window
Influence of temperature and plastic deformation on structural phase transformations in 12Kh18N9T steel
S. V. Kolosov; S. A. Barannikova; G. V. Shlaykhova
AIP Conf. Proc. 2899, 020074 (2023) https://doi.org/10.1063/5.0163075
View articletitled, Influence of temperature and plastic deformation on structural phase transformations in 12Kh18N9T steel
Open the PDF for in another window
Influence of temperature on macroscopic parameters of plastic deformation of polycrystalline aluminum
S. V. Kolosov; S. A. Barannikova; P. V. Iskhakova
AIP Conf. Proc. 2899, 020075 (2023) https://doi.org/10.1063/5.0163077
View articletitled, Influence of temperature on macroscopic parameters of plastic deformation of polycrystalline aluminum
Open the PDF for in another window
Structure, morphology and composition of composite PLGA/CaP/Ti scaffolds for drug delivery
E. G. Komarova; E. A. Kazantseva; K. A. Prosolov; S. O. Kazantsev; A. S. Lozhkomoev
AIP Conf. Proc. 2899, 020076 (2023) https://doi.org/10.1063/5.0163058
View articletitled, Structure, morphology and composition of composite PLGA/CaP/Ti scaffolds for drug delivery
Open the PDF for in another window
Numerical research of mechanical integrity of ice structures considering phase change
Denis S. Konov; Maksim V. Muratov; Evgenija K. Guseva; Igor B. Petrov
AIP Conf. Proc. 2899, 020077 (2023) https://doi.org/10.1063/5.0163175
View articletitled, Numerical research of mechanical integrity of ice structures considering phase change
Open the PDF for in another window
Modeling the dynamic behavior of inconel 625 - TiB2 composites
M. V. Korobenkov; V. V. Promakhov
AIP Conf. Proc. 2899, 020078 (2023) https://doi.org/10.1063/5.0163435
View articletitled, Modeling the dynamic behavior of inconel 625 - TiB2 composites
Open the PDF for in another window
The resistance of amorphous metals to thermal effects. Molecular dynamics modeling
Sergei Yu. Korostelev; Eugenii E. Slyadnikov; Igor Yu. Turchanovsky
AIP Conf. Proc. 2899, 020079 (2023) https://doi.org/10.1063/5.0162918
View articletitled, The resistance of amorphous metals to thermal effects. Molecular dynamics modeling
Open the PDF for in another window
Silicon adsorption on the (111) surface of TiN, AlN and TaN compounds
Yury Koroteev; Leonid Svyatkin; Sergey Ognev
AIP Conf. Proc. 2899, 020080 (2023) https://doi.org/10.1063/5.0162851
View articletitled, Silicon adsorption on the (111) surface of TiN, AlN and TaN compounds
Open the PDF for in another window
Temperature dependence of grain boundary energy in yttria-doped zirconia
Tanzilya Kozlova; Pavel Kuznetsov
AIP Conf. Proc. 2899, 020081 (2023) https://doi.org/10.1063/5.0163677
View articletitled, Temperature dependence of grain boundary energy in yttria-doped zirconia
Open the PDF for in another window
High-temperature mechanical properties of MAX-phase based functionally graded laminated composites fabricated from preceramic papers
D. G. Krotkevich; E. B. Kashkarov; M. G. Krinitsyn; N. Travitzky
AIP Conf. Proc. 2899, 020082 (2023) https://doi.org/10.1063/5.0169590
View articletitled, High-temperature mechanical properties of MAX-phase based functionally graded laminated composites fabricated from preceramic papers
Open the PDF for in another window
Improving the properties of metal-hydrides hydrogen storage systems
N. E. Kurdyumov; V. N. Kudiiarov; N. S. Pushilina; R. R. Elman
AIP Conf. Proc. 2899, 020083 (2023) https://doi.org/10.1063/5.0162924
View articletitled, Improving the properties of metal-hydrides hydrogen storage systems
Open the PDF for in another window
Viscoelastoplastic model of titanium alloys with the influence of pile-up dislocation on the crack nucleation
Kseniia A. Kurmoiartseva; Nikita A. Knyazev; Natalya V. Kotelnikova; Peter V. Trusov
AIP Conf. Proc. 2899, 020084 (2023) https://doi.org/10.1063/5.0163227
View articletitled, Viscoelastoplastic model of titanium alloys with the influence of pile-up dislocation on the crack nucleation
Open the PDF for in another window
Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing
Viktor P. Kuznetsov; Vladimir G. Gorgots; Igor A. Vorontsov; Andrey S. Skorobogatov; Anna V. Kosareva
AIP Conf. Proc. 2899, 020085 (2023) https://doi.org/10.1063/5.0162889
View articletitled, Surface hardening of medical parts made of AISI 304 austenitic stainless steel by nanostructuring burnishing
Open the PDF for in another window
Numerical study of the influence of the sample size ratio on the measured mechanical characteristics of bone tissue samples under three-point bending
A. A. Lapshina; G. M. Eremina; E. V. Shilko
AIP Conf. Proc. 2899, 020086 (2023) https://doi.org/10.1063/5.0163977
View articletitled, Numerical study of the influence of the sample size ratio on the measured mechanical characteristics of bone tissue samples under three-point bending
Open the PDF for in another window
Formation of (ultra)fine-grained structure in an Al-Mg-Sc alloy subjected to high temperature multidirectional isothermal forging
Oksana Latypova; Oleg Sitdikov; Elena Avtokratova; Mikhail Markushev
AIP Conf. Proc. 2899, 020087 (2023) https://doi.org/10.1063/5.0163225
View articletitled, Formation of (ultra)fine-grained structure in an Al-Mg-Sc alloy subjected to high temperature multidirectional isothermal forging
Open the PDF for in another window
Stress concentration analysis in rock mass with regard to elastoplastic shears and local bends
S. V. Lavrikov; O. A. Mikenina
AIP Conf. Proc. 2899, 020088 (2023) https://doi.org/10.1063/5.0164366
View articletitled, Stress concentration analysis in rock mass with regard to elastoplastic shears and local bends
Open the PDF for in another window
On the example of validation of FIDESYS package using the analytical solution to the problem of radially symmetric deformation of a hollow sphere made of elastoplastic material
Vladimir A. Levin; Konstantin M. Zingerman; Anatoly V. Vershinin; Yury Yu. Podladchikov
AIP Conf. Proc. 2899, 020089 (2023) https://doi.org/10.1063/5.0163433
View articletitled, On the example of validation of FIDESYS package using the analytical solution to the problem of radially symmetric deformation of a hollow sphere made of elastoplastic material
Open the PDF for in another window
Determination of the maximum time step for DEM simulation
Denis Lobovikov; Аleksei Kharchenko; Еlena Matygullina
AIP Conf. Proc. 2899, 020090 (2023) https://doi.org/10.1063/5.0163719
View articletitled, Determination of the maximum time step for DEM simulation
Open the PDF for in another window
Tribological properties of three-component solid-lubricant PEI-based composites under point and line contact conditions
J. Luo; D. G. Buslovich; L. A. Kornienko; V. O. Alexenko; S. V. Panin
AIP Conf. Proc. 2899, 020091 (2023) https://doi.org/10.1063/5.0162777
View articletitled, Tribological properties of three-component solid-lubricant PEI-based composites under point and line contact conditions
Open the PDF for in another window
Characterizing two-phase structures using correlation functions
P. V. Maksimov; A. Yu. Smolin
AIP Conf. Proc. 2899, 020092 (2023) https://doi.org/10.1063/5.0169586
View articletitled, Characterizing two-phase structures using correlation functions
Open the PDF for in another window
Effect of volume content of the hardening phase on the hardness of dual ceramic composites
I. P. Martyshina; G. M. Eremina; A. Yu. Smolin
AIP Conf. Proc. 2899, 020093 (2023) https://doi.org/10.1063/5.0163785
View articletitled, Effect of volume content of the hardening phase on the hardness of dual ceramic composites
Open the PDF for in another window
Study of the Al86Ni6Co4Gd2Tb2 liquid alloys crystallization under high pressure of 10 GPa
Svetlana Menshikova; Vadim Brazhkin; Anastasiya Danilova
AIP Conf. Proc. 2899, 020094 (2023) https://doi.org/10.1063/5.0163213
View articletitled, Study of the Al<sub>86</sub>Ni<sub>6</sub>Co<sub>4</sub>Gd<sub>2</sub>Tb<sub>2</sub> liquid alloys crystallization under high pressure of 10 GPa
Open the PDF for in another window
Development of numerical models of materials of endoprosthesis of the lumbar spine
Dmitriy A. Mileykin; Irina P. Martishina; Galina M. Eremina; Alexey Y. Smolin
AIP Conf. Proc. 2899, 020095 (2023) https://doi.org/10.1063/5.0169724
View articletitled, Development of numerical models of materials of endoprosthesis of the lumbar spine
Open the PDF for in another window
Phase composition of surface layers of Ti49.4Ni50.6(at.%) samples after hydrogenation in normal saline and subsequent aging at room temperature
Yuri Mironov; Victor Grishkov; Dorzhima Zhapova; Dmitrii Bobrov
AIP Conf. Proc. 2899, 020096 (2023) https://doi.org/10.1063/5.0163687
View articletitled, Phase composition of surface layers of Ti<sub>49.4</sub>Ni<sub>50.6</sub>(at.%) samples after hydrogenation in normal saline and subsequent aging at room temperature
Open the PDF for in another window
Effect of tempering on mechanical properties of a new advanced high-strength steel with 0.34% C
Roman Mishnev; Yuliya Borisova; Olga Vagina; Otari Didmanidze; Marina Tikhonova
AIP Conf. Proc. 2899, 020097 (2023) https://doi.org/10.1063/5.0163108
View articletitled, Effect of tempering on mechanical properties of a new advanced high-strength steel with 0.34% C
Open the PDF for in another window
Rheology of self-assembled highly viscoelastic network based on wormlike surfactant micelles with movable hydrophobic junctions
V. S. Molchanov; V. A. Pletneva; O. E. Philippova
AIP Conf. Proc. 2899, 020098 (2023) https://doi.org/10.1063/5.0163103
View articletitled, Rheology of self-assembled highly viscoelastic network based on wormlike surfactant micelles with movable hydrophobic junctions
Open the PDF for in another window
Application of criteria by Pettifor, Pugh and Frantsevich in the plasticity and brittleness analysis of the TiNi-TiFe alloys with and without martensitic transformations
S. A. Muslov; A. A. Pivovarov; P. Y. Sukhochev; N. V. Zaitseva
AIP Conf. Proc. 2899, 020099 (2023) https://doi.org/10.1063/5.0162901
View articletitled, Application of criteria by Pettifor, Pugh and Frantsevich in the plasticity and brittleness analysis of the TiNi-TiFe alloys with and without martensitic transformations
Open the PDF for in another window
Effect of temperature on the stages and localization of plastic deformation in a copper-nickel alloy
M. V. Nadezhkin; S. A. Barannikova
AIP Conf. Proc. 2899, 020100 (2023) https://doi.org/10.1063/5.0162750
View articletitled, Effect of temperature on the stages and localization of plastic deformation in a copper-nickel alloy
Open the PDF for in another window
Plastic strain macrolocalization parameters of aluminum in low-temperature creep
M. V. Nadezhkin; S. A. Barannikova; L. B. Zuev
AIP Conf. Proc. 2899, 020101 (2023) https://doi.org/10.1063/5.0162755
View articletitled, Plastic strain macrolocalization parameters of aluminum in low-temperature creep
Open the PDF for in another window
The oxidation effect on mechanical properties and fracture of β titanium alloy
E. V. Naydenkin; I. P. Mishin; O. V. Zabudchenko; O. N. Lykova; A. I. Manisheva
AIP Conf. Proc. 2899, 020102 (2023) https://doi.org/10.1063/5.0162855
View articletitled, The oxidation effect on mechanical properties and fracture of β titanium alloy
Open the PDF for in another window
Biphase model of electroplastic deformation metals
Sergey A. Nevskii; Vladimir D. Sarychev; Elena Martusevich; Sergey V. Konovalov; Victor E. Gromov; Alexei Granovskii
AIP Conf. Proc. 2899, 020103 (2023) https://doi.org/10.1063/5.0163399
View articletitled, Biphase model of electroplastic deformation metals
Open the PDF for in another window
Grain structure and mechanical properties management for titanium alloy in electron beam additive manufacturing
A. V. Nikolaeva; A. P. Zykova; A. V. Chumaevskii; A. V. Vorontsov; D. A. Gurianov; A. A. Gusarenko
AIP Conf. Proc. 2899, 020104 (2023) https://doi.org/10.1063/5.0162753
View articletitled, Grain structure and mechanical properties management for titanium alloy in electron beam additive manufacturing
Open the PDF for in another window
Molecular dynamic simulation of uniaxial constrained conditions deformation of [001]-single crystals of aluminum bronze
A. Yu. Nikonov; D. V. Lychagin; A. A. Bibko; O. S. Novitskaya
AIP Conf. Proc. 2899, 020105 (2023) https://doi.org/10.1063/5.0163105
View articletitled, Molecular dynamic simulation of uniaxial constrained conditions deformation of [001]-single crystals of aluminum bronze
Open the PDF for in another window
Molecular-dynamic calculation of the interaction parameters of meso-scale particles of dissimilar metals
A. Yu. Nikonov; A. I. Dmitriev
AIP Conf. Proc. 2899, 020106 (2023) https://doi.org/10.1063/5.0163106
View articletitled, Molecular-dynamic calculation of the interaction parameters of meso-scale particles of dissimilar metals
Open the PDF for in another window
Obtaining functionally graded materials based on AISI 321 and C11000 with sharp and smooth interfaces using wire-feed electron beam additive technology
K. S. Osipovich; K. N. Kalashnikov; A. V. Chumaevskii; A. V. Vorontsov
AIP Conf. Proc. 2899, 020107 (2023) https://doi.org/10.1063/5.0163061
View articletitled, Obtaining functionally graded materials based on AISI 321 and C11000 with sharp and smooth interfaces using wire-feed electron beam additive technology
Open the PDF for in another window
Production of heterogeneous polymetallic based on Cu-Fe by multi-wire electron beam additive manufacturing
K. S. Osipovich; A. V. Chumaevskii; S. Yu. Nikonov
AIP Conf. Proc. 2899, 020108 (2023) https://doi.org/10.1063/5.0163062
View articletitled, Production of heterogeneous polymetallic based on Cu-Fe by multi-wire electron beam additive manufacturing
Open the PDF for in another window
Microstructure and tensile properties of TiNbZr alloy-based metal-matrix composites, reinforced with borides
M. Ozerov; V. Sokolovsky; N. Stepanov; S. Zherebtsov
AIP Conf. Proc. 2899, 020109 (2023) https://doi.org/10.1063/5.0164036
View articletitled, Microstructure and tensile properties of TiNbZr alloy-based metal-matrix composites, reinforced with borides
Open the PDF for in another window
Ultrasonic welding of “PEEK–CF–fabric prepreg–PEEK” laminated composites
S. V. Panin; V. O. Alexenko; D. Tian; D. G. Buslovich; A. V. Byakov
AIP Conf. Proc. 2899, 020110 (2023) https://doi.org/10.1063/5.0162779
View articletitled, Ultrasonic welding of “PEEK–CF–fabric prepreg–PEEK” laminated composites
Open the PDF for in another window
Effect of cold rotary swaging on texture of a metastable austenitic stainless steel
D. O. Panov; E. A. Kudryavtsev; S. V. Naumov; R. S. Chernichenko; V. V. Mirontsov; A. S. Pertcev; S. V. Zherebtsov; G. A. Salishchev
AIP Conf. Proc. 2899, 020111 (2023) https://doi.org/10.1063/5.0163196
View articletitled, Effect of cold rotary swaging on texture of a metastable austenitic stainless steel
Open the PDF for in another window
A comprehensive structural study of copper-nickel alloys after recrystallization annealing
M. V. Perovskaya; S. A. Barannikova; G. V. Shlaykhova
AIP Conf. Proc. 2899, 020112 (2023) https://doi.org/10.1063/5.0163692
View articletitled, A comprehensive structural study of copper-nickel alloys after recrystallization annealing
Open the PDF for in another window
Combined high-speed method for hardening of steel with borides of refractory metals
Elizaveta Petrikova; Yurii Ivanov; Vladimir Shugurov; Anton Teresov; Oleg Tolkachev; Mariya Petyukevich
AIP Conf. Proc. 2899, 020113 (2023) https://doi.org/10.1063/5.0163147
View articletitled, Combined high-speed method for hardening of steel with borides of refractory metals
Open the PDF for in another window
Structure and properties of multilayer nanocrystalline ceramics based on a high-entropy alloy
Elizaveta Petrikova; Yurii Ivanov; Vladimir Shugurov; Nikita Prokopenko; Oleg Tolkachev
AIP Conf. Proc. 2899, 020114 (2023) https://doi.org/10.1063/5.0163126
View articletitled, Structure and properties of multilayer nanocrystalline ceramics based on a high-entropy alloy
Open the PDF for in another window
Statistical characterization of deformation-induced surface roughness in commercially pure titanium
M. Pisarev; E. Emelianova; V. Romanova
AIP Conf. Proc. 2899, 020115 (2023) https://doi.org/10.1063/5.0163693
View articletitled, Statistical characterization of deformation-induced surface roughness in commercially pure titanium
Open the PDF for in another window
Effect of long-term aging on the features of plastic deformation and fracture of ferritic-martensitic steel EP-823
N. A. Polekhina; V. V. Linnik; I. Yu. Litovchenko; K. V. Almaeva; S. A. Akkuzin
AIP Conf. Proc. 2899, 020116 (2023) https://doi.org/10.1063/5.0163696
View articletitled, Effect of long-term aging on the features of plastic deformation and fracture of ferritic-martensitic steel EP-823
Open the PDF for in another window
Contact mechanics of an unstable viscoelastic medium with retardation as a model for mechanical activation and synchronization of cardiac spheroids
Valentin L. Popov; Ken Nakano
AIP Conf. Proc. 2899, 020117 (2023) https://doi.org/10.1063/5.0162896
View articletitled, Contact mechanics of an unstable viscoelastic medium with retardation as a model for mechanical activation and synchronization of cardiac spheroids
Open the PDF for in another window
Calculation of the bending capacity of steel sheets with a yield strength gradient
Yulia Pronina; Alexander Maksimov; Maria Peglivanova; Sergey Kabrits
AIP Conf. Proc. 2899, 020118 (2023) https://doi.org/10.1063/5.0163805
View articletitled, Calculation of the bending capacity of steel sheets with a yield strength gradient
Open the PDF for in another window
Fracture of an orthotropic composite in compression and unloading waves
Andrey V. Radchenko; Pavel A. Radchenko; Stanislav P. Batuev; Kseniya V. Vik
AIP Conf. Proc. 2899, 020119 (2023) https://doi.org/10.1063/5.0162814
View articletitled, Fracture of an orthotropic composite in compression and unloading waves
Open the PDF for in another window
Stress-strain state of an anodic block of electrolyzer with aluminum conductive rods
A. V. Radchenko; P. A. Radchenko; S. P. Batuev; K. V. Vik
AIP Conf. Proc. 2899, 020120 (2023) https://doi.org/10.1063/5.0162816
View articletitled, Stress-strain state of an anodic block of electrolyzer with aluminum conductive rods
Open the PDF for in another window
The influence of the shape of the head part of a cylindrical heavy alloy striker on the process of its interaction with an aluminum barrier
Pavel A. Radchenko; Andrey V. Radchenko; Stanislav P. Batuev
AIP Conf. Proc. 2899, 020121 (2023) https://doi.org/10.1063/5.0162809
View articletitled, The influence of the shape of the head part of a cylindrical heavy alloy striker on the process of its interaction with an aluminum barrier
Open the PDF for in another window
Towards the distribution of a class of polycrystalline materials with an equilibrium defect structure by grain diameters: Temperature behavior of the yield strength
A. A. Reshetnyak; V. V. Shamshutdinova
AIP Conf. Proc. 2899, 020122 (2023) https://doi.org/10.1063/5.0162982
View articletitled, Towards the distribution of a class of polycrystalline materials with an equilibrium defect structure by grain diameters: Temperature behavior of the yield strength
Open the PDF for in another window
Full-wave simulation in media with mesoscopic fractures by the matrix-free finite element method on GPU
Grigory Sabinin; Arseniy Mokin; Anatoly Vershinin; Tatiana Chichinina
AIP Conf. Proc. 2899, 020123 (2023) https://doi.org/10.1063/5.0163700
View articletitled, Full-wave simulation in media with mesoscopic fractures by the matrix-free finite element method on GPU
Open the PDF for in another window
3D printing of aluminum-manganese bronze by wire-arc additive manufacturing
V. M. Semenchuk; A. V. Chumaevskii; V. E. Rubtsov; N. V. Teryukalova; A. S. Nepomnyaschiy; V. A. Beloborodov
AIP Conf. Proc. 2899, 020124 (2023) https://doi.org/10.1063/5.0162760
View articletitled, 3D printing of aluminum-manganese bronze by wire-arc additive manufacturing
Open the PDF for in another window
High-temperature synthesis of anorthite phase in glass ceramic material
M. A. Semenovykh; N. K. Skripnikova; V. V. Shekhovtsov
AIP Conf. Proc. 2899, 020125 (2023) https://doi.org/10.1063/5.0162714
View articletitled, High-temperature synthesis of anorthite phase in glass ceramic material
Open the PDF for in another window
Accurate analysis of the nonlinearity of hysteresis loops in the areas of active and passive deformation of CFRP laminate under repeated quasi-static loading
P. B. Severov
AIP Conf. Proc. 2899, 020126 (2023) https://doi.org/10.1063/5.0165177
View articletitled, Accurate analysis of the nonlinearity of hysteresis loops in the areas of active and passive deformation of CFRP laminate under repeated quasi-static loading
Open the PDF for in another window
Wave process of plastic deformation in titanium alloys determining the fracture mechanisms of compressor and fan disks on different scale levels
Andrey Shanyavskiy; Aleksandr Nikitin; Aleksey Soldatenkov
AIP Conf. Proc. 2899, 020127 (2023) https://doi.org/10.1063/5.0163149
View articletitled, Wave process of plastic deformation in titanium alloys determining the fracture mechanisms of compressor and fan disks on different scale levels
Open the PDF for in another window
Plasma chemical synthesis of magnesium aluminate spinel
Valentin Shekhovtsov; Nelly Skripnikova
AIP Conf. Proc. 2899, 020128 (2023) https://doi.org/10.1063/5.0162716
View articletitled, Plasma chemical synthesis of magnesium aluminate spinel
Open the PDF for in another window
Effect of heat treatment on properties of cold sprayed Al-B4C composite coatings
Vladislav S. Shikalov; Vladimir F. Kosarev; Tomila M. Vidyuk; Sergei V. Klinkov
AIP Conf. Proc. 2899, 020129 (2023) https://doi.org/10.1063/5.0163698
View articletitled, Effect of heat treatment on properties of cold sprayed Al-B<sub>4</sub>C composite coatings
Open the PDF for in another window
Development of a mesoscale mechanical model of ceramic materials with multiscale porosity. Silica refractory case study
E. V. Shilko; A. S. Grigoriev; A. A. Lapshina; A. S. Buyakov; V. V. Shmakov; A. I. Dmitriev; A. V. Zabolotskiy; K. Andreev
AIP Conf. Proc. 2899, 020130 (2023) https://doi.org/10.1063/5.0162808
View articletitled, Development of a mesoscale mechanical model of ceramic materials with multiscale porosity. Silica refractory case study
Open the PDF for in another window
Experimental - Numerical study of the influence of radial air gapes in explosive charges on fragmentation in the working of rock
I. E. Shipovskii; V. A. Trofimov; N. N. Efremovtsev
AIP Conf. Proc. 2899, 020131 (2023) https://doi.org/10.1063/5.0163104
View articletitled, Experimental - Numerical study of the influence of radial air gapes in explosive charges on fragmentation in the working of rock
Open the PDF for in another window
Smoothed particle hydrodynamics simulation of rock slope stability
I. E. Shipovskii; V. A. Trofimov
AIP Conf. Proc. 2899, 020132 (2023) https://doi.org/10.1063/5.0163111
View articletitled, Smoothed particle hydrodynamics simulation of rock slope stability
Open the PDF for in another window
Fatigue failure of VT1-0 and A5M alloys under a constant magnetic field
V. V. Shlyarov; K. V. Aksenova; D. V. Zaguliaev; K. A. Osintsev; Yu. F. Ivanov
AIP Conf. Proc. 2899, 020133 (2023) https://doi.org/10.1063/5.0163623
View articletitled, Fatigue failure of VT1-0 and A5M alloys under a constant magnetic field
Open the PDF for in another window
Structure and mechanical properties of Ti-Al-N, Ti-Al-Ta-N, Ti-Al-Si-N and Ti-Al-Ta-Si-N coatings
A. R. Shugurov; E. D. Kuzminov; Yu. A. Garanin
AIP Conf. Proc. 2899, 020134 (2023) https://doi.org/10.1063/5.0162823
View articletitled, Structure and mechanical properties of Ti-Al-N, Ti-Al-Ta-N, Ti-Al-Si-N and Ti-Al-Ta-Si-N coatings
Open the PDF for in another window
Determination of mechanical characteristics of wooden composite at three-point bending with different ratio of balsa and lime wood
P. A. Shupik; A. A. Filippov
AIP Conf. Proc. 2899, 020135 (2023) https://doi.org/10.1063/5.0165547
View articletitled, Determination of mechanical characteristics of wooden composite at three-point bending with different ratio of balsa and lime wood
Open the PDF for in another window
Numerical study of the influence of hardening inclusions in the surface layer of bronze on the features of sliding friction
A. Yu. Smolin; G. M. Eremina; U. V. Smirnova
AIP Conf. Proc. 2899, 020136 (2023) https://doi.org/10.1063/5.0163012
View articletitled, Numerical study of the influence of hardening inclusions in the surface layer of bronze on the features of sliding friction
Open the PDF for in another window
Towards the analytical calculation of thermal residual stress in layered and graded composites
Igor Yu. Smolin; Valentina A. Zimina
AIP Conf. Proc. 2899, 020137 (2023) https://doi.org/10.1063/5.0162736
View articletitled, Towards the analytical calculation of thermal residual stress in layered and graded composites
Open the PDF for in another window
Irreversible deformation and residual stresses in a cyclically loaded rock sample with a crack
Yu. P. Stefanov; R. A. Bakeev
AIP Conf. Proc. 2899, 020138 (2023) https://doi.org/10.1063/5.0163657
View articletitled, Irreversible deformation and residual stresses in a cyclically loaded rock sample with a crack
Open the PDF for in another window
Interstitial high entropy alloys with FCC structure for cryogenic applications
Nikita Stepanov; Anastasiia Semenyuk
AIP Conf. Proc. 2899, 020139 (2023) https://doi.org/10.1063/5.0163026
View articletitled, Interstitial high entropy alloys with FCC structure for cryogenic applications
Open the PDF for in another window
Microstructural peculiarities in 316L-type steel subjected to primary recrystallization following small deformation
M. Tikhonova; P. Dolzhenko; A. Belyakov
AIP Conf. Proc. 2899, 020140 (2023) https://doi.org/10.1063/5.0163820
View articletitled, Microstructural peculiarities in 316L-type steel subjected to primary recrystallization following small deformation
Open the PDF for in another window
Thermal- and stress-induced martensitic transformations in single-phase and heterophase Ni42Fe19Ga27Co12 single crystals
E. E. Timofeeva; E. Yu. Panchenko; M. V. Zherdeva; I. Karaman; Yu. I. Chumlyakov
AIP Conf. Proc. 2899, 020141 (2023) https://doi.org/10.1063/5.0164695
View articletitled, Thermal- and stress-induced martensitic transformations in single-phase and heterophase Ni<sub>42</sub>Fe<sub>19</sub>Ga<sub>27</sub>Co<sub>12</sub> single crystals
Open the PDF for in another window
Effect of cold rolling on microstructure and mechanical properties of a low-alloyed Cu-Mg alloy with a coarse or ultrafine grained structure
M. Tkachev; A. Pilipenko; A. Bodyakova
AIP Conf. Proc. 2899, 020142 (2023) https://doi.org/10.1063/5.0162954
View articletitled, Effect of cold rolling on microstructure and mechanical properties of a low-alloyed Cu-Mg alloy with a coarse or ultrafine grained structure
Open the PDF for in another window
Mechanical properties and microstructure of a 9%Cr B-bearing martensitic steel after thermo-mechanical treatment
E. Tkachev; A. Belyakov
AIP Conf. Proc. 2899, 020143 (2023) https://doi.org/10.1063/5.0163489
View articletitled, Mechanical properties and microstructure of a 9%Cr B-bearing martensitic steel after thermo-mechanical treatment
Open the PDF for in another window
Effect of quenching and tempering on the mechanical properties and fracture behavior of a low-alloyed 0.2-0.3C steels
E. Tkachev; S. Borisov; A. Pikina; S. Gaidar; R. Kaibyshev
AIP Conf. Proc. 2899, 020144 (2023) https://doi.org/10.1063/5.0163490
View articletitled, Effect of quenching and tempering on the mechanical properties and fracture behavior of a low-alloyed 0.2-0.3C steels
Open the PDF for in another window
Tempered microstructures and hardening of a 0.4%C-13%Cr steel
Vladimir Torganchuk; Pavel Dolzhenko; Lilia Polovneva; Rustam Kaibyshev
AIP Conf. Proc. 2899, 020145 (2023) https://doi.org/10.1063/5.0164166
View articletitled, Tempered microstructures and hardening of a 0.4%C-13%Cr steel
Open the PDF for in another window
Modeling discontinuous plasticity using a three-level dislocation-oriented model
Peter V. Trusov; Evgeniia A. Chechulina; Dmitriy S. Gribov; Roman M. Gerasimov
AIP Conf. Proc. 2899, 020146 (2023) https://doi.org/10.1063/5.0163643
View articletitled, Modeling discontinuous plasticity using a three-level dislocation-oriented model
Open the PDF for in another window
The formation of nanocomposite In-Sn-O coatings on glass to decrease local surface damage under the impact of hyper-velocity particles
R. B. Tursunkhanova; V. P. Sergeev; M. P. Kalashnikov; O. V. Sergeev; V. V. Stuzhuk; V. V. Neufeld
AIP Conf. Proc. 2899, 020147 (2023) https://doi.org/10.1063/5.0163709
View articletitled, The formation of nanocomposite In-Sn-O coatings on glass to decrease local surface damage under the impact of hyper-velocity particles
Open the PDF for in another window
Microstructure and properties of composite materials with aluminum bronze matrix produced by wire electron-beam additive manufacturing
V. R. Utyaganova; N. N. Shamarin; A. V. Chumaevskii; V. A. Beloborodov; L. L. Zhukov; S. Yu. Nikonov; A. V. Gusarova
AIP Conf. Proc. 2899, 020148 (2023) https://doi.org/10.1063/5.0169587
View articletitled, Microstructure and properties of composite materials with aluminum bronze matrix produced by wire electron-beam additive manufacturing
Open the PDF for in another window
Application of a Ti2CuAl5 powder mixture as a filler material in Ti/Al dissimilar laser welding
I. Vitoshkin; A. Malikov
AIP Conf. Proc. 2899, 020149 (2023) https://doi.org/10.1063/5.0163710
View articletitled, Application of a Ti<sub>2</sub>CuAl<sub>5</sub> powder mixture as a filler material in Ti/Al dissimilar laser welding
Open the PDF for in another window
Structure and properties of composites based on multicomponent solid solution with inclusions hexagonal boron nitride
Dakun Wang; Elena S. Dedova; Svetlana P. Buyakova
AIP Conf. Proc. 2899, 020150 (2023) https://doi.org/10.1063/5.0169578
View articletitled, Structure and properties of composites based on multicomponent solid solution with inclusions hexagonal boron nitride
Open the PDF for in another window
Numerical simulation of the effective mechanical properties of the core samples by GPU computing
Maxim Yakovlev; Leonid Nikitin; Vladimir Levin
AIP Conf. Proc. 2899, 020151 (2023) https://doi.org/10.1063/5.0163107
View articletitled, Numerical simulation of the effective mechanical properties of the core samples by GPU computing
Open the PDF for in another window
Effect of tempering on microstructure and mechanical properties of novel low-alloy high strength steel
Diana Y. Yuzbekova; Sergey M. Gaidar; Sofia M. Vetrova; Valeriy A. Dudko
AIP Conf. Proc. 2899, 020152 (2023) https://doi.org/10.1063/5.0163088
View articletitled, Effect of tempering on microstructure and mechanical properties of novel low-alloy high strength steel
Open the PDF for in another window
Simulation of crack nucleation in homogeneous material containing regularly spaced pores under the action of uniaxial compression
A. V. Zabolotskiy; M. Y. Turchin; V. T. Khadyev; A. O. Migashkin
AIP Conf. Proc. 2899, 020153 (2023) https://doi.org/10.1063/5.0163020
View articletitled, Simulation of crack nucleation in homogeneous material containing regularly spaced pores under the action of uniaxial compression
Open the PDF for in another window
Features of the cured polymer composite materials delamination surface after exposure to a microwave electromagnetic field
Irina Zlobina; Nikolay Bekrenev; Dmitry Kuznetsov
AIP Conf. Proc. 2899, 020154 (2023) https://doi.org/10.1063/5.0163217
View articletitled, Features of the cured polymer composite materials delamination surface after exposure to a microwave electromagnetic field
Open the PDF for in another window
Plastic flow macro-scale localization process: Pattern and autowaves
Lev B. Zuev
AIP Conf. Proc. 2899, 020155 (2023) https://doi.org/10.1063/5.0163214
View articletitled, Plastic flow macro-scale localization process: Pattern and autowaves
Open the PDF for in another window
Phytochemical analysis of bioactive compounds in ethanolic extract of Sterculia quadrifida R.Br.
MRI image processing method on brain tumors: A review
The design and optimization process of ball mill to reduce particle size of calcium carbonate materials
  • Online ISSN 1551-7616
  • Print ISSN 0094-243X

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

  • © Copyright AIP
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal