Skip Nav Destination
Issues
PRELIMINARY
G01 - INJECTION MOLDING
Analysis of the blowing behavior of semi-crystalline plastics in the two-stage GIT blow process
AIP Conf. Proc. 2884, 020002 (2023)
https://doi.org/10.1063/5.0170336
Verification of fiber orientation mechanism by resin flow behavior in the flow front confluence region
AIP Conf. Proc. 2884, 020003 (2023)
https://doi.org/10.1063/5.0168443
G01 - INJECTION MOLDING - POSTER
Design of control system for automobile lampshade production line
AIP Conf. Proc. 2884, 030001 (2023)
https://doi.org/10.1063/5.0168900
Design alternative for automobile door trim strip production line
AIP Conf. Proc. 2884, 030002 (2023)
https://doi.org/10.1063/5.0168903
Development of selection software based on medium-sized injection molding machine
AIP Conf. Proc. 2884, 030003 (2023)
https://doi.org/10.1063/5.0168893
Automotive skylight frame injection molding automation system design
AIP Conf. Proc. 2884, 030004 (2023)
https://doi.org/10.1063/5.0168901
G02 - EXTRUSION AND COATING
Influence of raw material shape on single screw extruder performance
AIP Conf. Proc. 2884, 040001 (2023)
https://doi.org/10.1063/5.0168760
Simulation-driven mold geometry optimization for corrugated pipes – Maximum strength with minimum material input
AIP Conf. Proc. 2884, 040004 (2023)
https://doi.org/10.1063/5.0168244
G06 - POLYMER COMPOSITES
Biocomposites based on olive pruning fibers for industrial applications: Automobile and furniture
Juan P. Ferrer-Rodríguez; Manuela Cano-Galey; Francisco J. Navas-Martos; Sofía Jurado-Contreras; M. Dolores La Rubia; Soledad Mateo; Alberto Moya; Sebastián Sánchez; Thomas Baranowski; Inga Wehemeyer; Javier Peña-Moraga; Francisco Peña-Moraga; Pascal Metenier; Carmen Capiscol
AIP Conf. Proc. 2884, 050001 (2023)
https://doi.org/10.1063/5.0168835
Study on the fiber orientation variation due to bubble effect in fiber reinforced microcellular injection molding
AIP Conf. Proc. 2884, 050003 (2023)
https://doi.org/10.1063/5.0168401
Optical coherence tomography - A new method for evaluating the quality of thermoplastic glass-fiber-reinforced unidirectional tapes
Michael Wenninger; Christian Marschik; Karoline Felbermayer; Bettina Heise; Gerald Berger-Weber; Georg Steinbichler
AIP Conf. Proc. 2884, 050008 (2023)
https://doi.org/10.1063/5.0168192
Investigation of long-term stability of an atmospheric pressure plasma treatment of plastic melts
AIP Conf. Proc. 2884, 050009 (2023)
https://doi.org/10.1063/5.0168542
Process simulation and mechanical testing of sheet molding compound products
AIP Conf. Proc. 2884, 050010 (2023)
https://doi.org/10.1063/5.0168232
G06 - POLYMER COMPOSITES - POSTER
Flexural properties of recycled ABS/recycled carbon fiber fabric composites
AIP Conf. Proc. 2884, 060001 (2023)
https://doi.org/10.1063/5.0168558
G07 - NANOCOMPOSITES AND NANOTECHNOLOGY
Preparation of cellulose nanofiber from cassava pulp by high-pressure homogenizer
AIP Conf. Proc. 2884, 070001 (2023)
https://doi.org/10.1063/5.0168501
G08 - FILMS AND FIBERS
The relation between reversible thermal shrinkage and orientation change of polyamide fibers
AIP Conf. Proc. 2884, 080001 (2023)
https://doi.org/10.1063/5.0169287
Co-extruded polymer fibers for concrete reinforcement
AIP Conf. Proc. 2884, 080002 (2023)
https://doi.org/10.1063/5.0168511
G09 - MIXING AND COMPOUNDING
Modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder
AIP Conf. Proc. 2884, 090001 (2023)
https://doi.org/10.1063/5.0168426
Impact of processing method on the stability of polylactic acid
AIP Conf. Proc. 2884, 090002 (2023)
https://doi.org/10.1063/5.0168335
Study on the behavior of carbon fibers in the kneading process using twin-screw extruders
AIP Conf. Proc. 2884, 090004 (2023)
https://doi.org/10.1063/5.0168305
G09 - MIXING AND COMPOUNDING - POSTER
Design and numerical simulation of screw configuration of reactive co-rotating twin screw extruder for TPV
AIP Conf. Proc. 2884, 100001 (2023)
https://doi.org/10.1063/5.0168904
G10 - MODELING AND SIMULATION
Modelling of rheological and thermal properties for thermoset injection molding simulation process
AIP Conf. Proc. 2884, 110001 (2023)
https://doi.org/10.1063/5.0168277
Evaluating distributive mixing potential by mean distance of streamlines and a passive scalar
AIP Conf. Proc. 2884, 110004 (2023)
https://doi.org/10.1063/5.0168327
Process-oriented simulation of bubble formation for enhanced prediction of blown film properties
AIP Conf. Proc. 2884, 110007 (2023)
https://doi.org/10.1063/5.0168492
Detection of concept drift for quality prediction and process control in injection molding
AIP Conf. Proc. 2884, 110008 (2023)
https://doi.org/10.1063/5.0168491
Development of an injection molding simulation methodology for mineral-filled polyamide
AIP Conf. Proc. 2884, 110009 (2023)
https://doi.org/10.1063/5.0168735
G10 - MODELING AND SIMULATION - POSTER
Research on numerical simulation of injection molding process of thermoplastic PMMA micro-fluidic chip
AIP Conf. Proc. 2884, 120001 (2023)
https://doi.org/10.1063/5.0168902
G11 - MONITORING AND CHARACTERIZATION
Correlation of crosslinking degree and dynamic mechanical properties of rubber parts
AIP Conf. Proc. 2884, 130001 (2023)
https://doi.org/10.1063/5.0169330
G13 - POLYMER FOAMS
Quantification of the resistance against deformation under thermal load of different polymeric foams by a novel measuring approach
Tobias Standau; Andreas Himmelsbach; Catharina Stierle; Johannes Meuchelböck; Volker Altstädt; Holger Ruckdäschel
AIP Conf. Proc. 2884, 140001 (2023)
https://doi.org/10.1063/5.0168326
Development of a PGSS system for the production of powder for selective laser sintering
AIP Conf. Proc. 2884, 140004 (2023)
https://doi.org/10.1063/5.0173586
G15 - RUBBER AND ELASTOMERS
Hybrid materials for powertrain components – Elastomeric interlayers in fiber reinforced composites
AIP Conf. Proc. 2884, 150003 (2023)
https://doi.org/10.1063/5.0168199
G16 - REACTIVE PROCESSING
How the molecular weight of a polyester could influence the reactivity of Joncryl chain extender?
AIP Conf. Proc. 2884, 160001 (2023)
https://doi.org/10.1063/5.0168245
G17 - ADDITIVE MANUFACTURING (3D PRINTING)
Conformal mold heating and cooling using a CNT film heater and 3D-printed cellular structures
AIP Conf. Proc. 2884, 170002 (2023)
https://doi.org/10.1063/5.0168302
Qualification of different carbon fiber reinforced polyether ether ketone materials for the FFF process
AIP Conf. Proc. 2884, 170003 (2023)
https://doi.org/10.1063/5.0169018
Producing metallic parts using 3D printing of low-viscosity powder-binder feedstock: A feasibility study
AIP Conf. Proc. 2884, 170005 (2023)
https://doi.org/10.1063/5.0168410
S01 - BIOPOLYMERS,ECO-FRIENDLY POLYMERS AND RECYCLING
An experimental method for determining the diffusion coefficient of volatile components in polymeric materials
C. N. Chung; M. H. Akhras; C. Marschik; J. Fischer; J. Klimosek; J. Kosek; S. Pachner; G. Berger-Weber; G. Steinbichler
AIP Conf. Proc. 2884, 180003 (2023)
https://doi.org/10.1063/5.0169167
Separation of multi-component parts for mechanical recycling – Study about basic approaches using a heating process
AIP Conf. Proc. 2884, 180004 (2023)
https://doi.org/10.1063/5.0169604
S01 - BIOPOLYMERS,ECO-FRIENDLY POLYMERS AND RECYCLING - POSTER
Reinforced polymer blends composed of coffee capsules/thermoplastic starch
AIP Conf. Proc. 2884, 190001 (2023)
https://doi.org/10.1063/5.0168591
S03 - MOLDS
Optimized heat transfer in injection molds and its influence on demolding temperature and part quality
AIP Conf. Proc. 2884, 200001 (2023)
https://doi.org/10.1063/5.0168284
S04 - POLYMER FOR MEDICAL APPLICATION
Injectable hydrogel from glycidyl methacrylate grafted Poly (vinyl alcohol) for meniscus tissue engineering
AIP Conf. Proc. 2884, 210001 (2023)
https://doi.org/10.1063/5.0168694
S05 - POLYMER FOR AUTOMOBILE
Modeling and simulation of an alternative microcellular injection molding process Ku-FizzTM
AIP Conf. Proc. 2884, 220001 (2023)
https://doi.org/10.1063/5.0178484
S07 - POLYMER FOR HIGH PRESSURE HYDEROGEN
The encapsulation of metal boss components within rotomoulded liners for type IV H2 tanks
AIP Conf. Proc. 2884, 230001 (2023)
https://doi.org/10.1063/5.0169046
Network stability of FKM rubber compounds under hydrogen pressure
AIP Conf. Proc. 2884, 230002 (2023)
https://doi.org/10.1063/5.0168418
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Classification data mining with Laplacian Smoothing on Naïve Bayes method
Ananda P. Noto, Dewi R. S. Saputro
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.