Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 2848, Issue 1

12 June 2023

All Issues

Cover Image

Cover Image

In this Issue

PRELIMINARY
ARTICLES

PRELIMINARY

Preface: Advances in Fracture and Damage Mechanics XX

AIP Conf. Proc. 2848, 010001 (2023) https://doi.org/10.1063/12.0017200

View articletitled, Preface: Advances in Fracture and Damage Mechanics XX

Open the PDF for in another window

ARTICLES

A phase field model for material and fracture nonlinearities using a modified Mohr-Coulomb model: Application to the prediction of fracture events in high performance concrete

M. Sáez de Tejada; A. Quintanas-Corominas; J. Reinoso

AIP Conf. Proc. 2848, 020001 (2023) https://doi.org/10.1063/5.0150949

Abstract

View articletitled, A phase field model for material and fracture nonlinearities using a modified Mohr-Coulomb model: Application to the prediction of fracture events in high performance concrete

Open the PDF for in another window

Size dependent thermoelasticity for interface crack problems with a quasicrystal layer

Jan Sladek; Vladimir Sladek; Miroslav Repka; Siegfried Schmauder

AIP Conf. Proc. 2848, 020002 (2023) https://doi.org/10.1063/5.0145119

Abstract

View articletitled, Size dependent thermoelasticity for interface crack problems with a quasicrystal layer

Open the PDF for in another window

Influence of a corrosion pit on behavior of a nearby crack

Lucie Malíková; Tereza Juhászová; Pavel Doubek; Martin Krejsa; Stanislav Seitl

AIP Conf. Proc. 2848, 020003 (2023) https://doi.org/10.1063/5.0145104

Abstract

View articletitled, Influence of a corrosion pit on behavior of a nearby crack

Open the PDF for in another window

Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches

Miroslav Hrstka; Michal Kotoul; Tomáš Profant

AIP Conf. Proc. 2848, 020004 (2023) https://doi.org/10.1063/5.0145170

Abstract

View articletitled, Analysis of effect of domain polarization switching near sharp piezoelectric bi-material notches

Open the PDF for in another window

Phase transformation and residual stresses after laser surface modification of metastable austenitic stainless steel

Mohammad Rezayat; Joan Josep Roa Rovira; Antonio Mateo García

AIP Conf. Proc. 2848, 020005 (2023) https://doi.org/10.1063/5.0145063

Abstract

View articletitled, Phase transformation and residual stresses after laser surface modification of metastable austenitic stainless steel

Open the PDF for in another window

A general model of hard and soft interfaces with damage

Frédéric Lebon; Maria Letizia Raffa; Raffaella Rizzoni

AIP Conf. Proc. 2848, 020006 (2023) https://doi.org/10.1063/5.0145013

Abstract

View articletitled, A general model of hard and soft interfaces with damage

Open the PDF for in another window

Fatigue behavior of notched Ti-6Al-4V not STOA treated in inert environment

Emanuele Vincenzo Arcieri; Sergio Baragetti

AIP Conf. Proc. 2848, 020007 (2023) https://doi.org/10.1063/5.0145014

Abstract

View articletitled, Fatigue behavior of notched Ti-6Al-4V not STOA treated in inert environment

Open the PDF for in another window

High-temperature behaviour of various limestone used in heritage buildings at material and block scales

Ayoub Daoudi; Javad Eslami; Anne-Lise Beaucour; Martin Vigroux; Albert Noumowé

AIP Conf. Proc. 2848, 020008 (2023) https://doi.org/10.1063/5.0149082

Abstract

View articletitled, High-temperature behaviour of various limestone used in heritage buildings at material and block scales

Open the PDF for in another window

Characterization and modeling of carbon black/ultra- high-molecular-weight-polyethylene nanocomposites manufactured with equal channel angular extrusion

Kateryna Miroshnichenko; Stanislav Buklovskyi; Kostiantyn Vasylevskyi; Igor Tsukrov; Hannah J. Favreau; Rebecca J. Thomson; Peder C. Solberg; Douglas W. Van Citters

AIP Conf. Proc. 2848, 020009 (2023) https://doi.org/10.1063/5.0145202

Abstract

View articletitled, Characterization and modeling of carbon black/ultra- high-molecular-weight-polyethylene nanocomposites manufactured with equal channel angular extrusion

Open the PDF for in another window

Dispersion curves for lamb waves using analytical solutions and the scaled-boundary finite element method

Carlos Andrés Galán; Jabid Eduardo Quiroga; Octavio Andrés González-Estrada; Darío Yesid Peña Ballesteros; Cesar Augusto Acosta Minoli

AIP Conf. Proc. 2848, 020010 (2023) https://doi.org/10.1063/5.0145019

Abstract

View articletitled, Dispersion curves for lamb waves using analytical solutions and the scaled-boundary finite element method

Open the PDF for in another window

Boundary element analysis of three-dimensional thermomechanical orthotropic frictional contact problems

Iván Ubero-Martínez; José Vallepuga-Espinosa; Jaime Cifuentes-Rodríguez; Luis Rodríguez-Tembleque

AIP Conf. Proc. 2848, 020011 (2023) https://doi.org/10.1063/5.0145114

Abstract

View articletitled, Boundary element analysis of three-dimensional thermomechanical orthotropic frictional contact problems

Open the PDF for in another window

Influence of the crankshaft dynamic phenomena on the fatigue behaviour of a transmission chain in a hybrid power unit

Valerio Mangeruga; Fabio Renso; Francesco Raimondi; Saverio Giulio Barbieri; Matteo Giacopini

AIP Conf. Proc. 2848, 020012 (2023) https://doi.org/10.1063/5.0145024

Abstract

View articletitled, Influence of the crankshaft dynamic phenomena on the fatigue behaviour of a transmission chain in a hybrid power unit

Open the PDF for in another window

A novel method for measurements of microstructurally small fatigue crack growth using digital image correlation

Ilari Tillikainen; Pauli Lehto; Evgenii Malitckii; Pasquale Gallo; Heikki Remes

AIP Conf. Proc. 2848, 020013 (2023) https://doi.org/10.1063/5.0145384

Abstract

View articletitled, A novel method for measurements of microstructurally small fatigue crack growth using digital image correlation

Open the PDF for in another window

Influence of a thermomechanical treatment on the lifetime of a high strength steel in very high cycle fatigue

Jan Sippel; Eberhard Kerscher

AIP Conf. Proc. 2848, 020014 (2023) https://doi.org/10.1063/5.0145133

Abstract

View articletitled, Influence of a thermomechanical treatment on the lifetime of a high strength steel in very high cycle fatigue

Open the PDF for in another window

Fe model for the validation of a damage detection method based on guided waves

Alessandro De Luca; Donato Perfetto; Antonio Polverino; Antonio Aversano; Giuseppe Lamanna; Francesco Caputo

AIP Conf. Proc. 2848, 020015 (2023) https://doi.org/10.1063/5.0145022

Abstract

View articletitled, Fe model for the validation of a damage detection method based on guided waves

Open the PDF for in another window

Fe analyses for the assessment of the coverage area of a guided waves SHM system

Donato Perfetto; Alessandro De Luca; Antonio Polverino; Antonio Aversano; Giuseppe Lamanna; Francesco Caputo

AIP Conf. Proc. 2848, 020016 (2023) https://doi.org/10.1063/5.0145017

Abstract

View articletitled, Fe analyses for the assessment of the coverage area of a guided waves SHM system

Open the PDF for in another window

Discrete crack propagation analysis of reinforced concrete beams under shear

Adrian Faron; Günter Axel Rombach

AIP Conf. Proc. 2848, 020017 (2023) https://doi.org/10.1063/5.0145044

Abstract

View articletitled, Discrete crack propagation analysis of reinforced concrete beams under shear

Open the PDF for in another window

A Ritz model for damage analysis in variable angle tow composite plates

Dario Campagna; Vincenzo Oliveri; Alberto Milazzo; Ivano Benedetti

AIP Conf. Proc. 2848, 020018 (2023) https://doi.org/10.1063/5.0145016

Abstract

View articletitled, A Ritz model for damage analysis in variable angle tow composite plates

Open the PDF for in another window

Tensile failure of bio-inspired lattices with different base topologies

Gabriele Simone; Riccardo Manno; Fabrice Barbe; Ivano Benedetti

AIP Conf. Proc. 2848, 020019 (2023) https://doi.org/10.1063/5.0145012

Abstract

View articletitled, Tensile failure of bio-inspired lattices with different base topologies

Open the PDF for in another window

Age-related changes of the traction-separation law parameters for the description of the delamination of the human aorta

Lukáš Horný; Zdeněk Petřivý; Petr Tichý; Hynek Chlup; Jakub Kronek; Tomáš Adámek; Alžběta Blanková

AIP Conf. Proc. 2848, 020020 (2023) https://doi.org/10.1063/5.0145030

Abstract

View articletitled, Age-related changes of the traction-separation law parameters for the description of the delamination of the human aorta

Open the PDF for in another window

Analysis of the effect of the seismic gap on the response of buildings experiencing pounding during earthquakes

Mahmoud Miari; Robert Jankowski

AIP Conf. Proc. 2848, 020021 (2023) https://doi.org/10.1063/5.0145034

Abstract

View articletitled, Analysis of the effect of the seismic gap on the response of buildings experiencing pounding during earthquakes

Open the PDF for in another window

Assessment of codes recommendations for the evaluation of the seismic gap of buildings founded on different soil types

Mahmoud Miari; Robert Jankowski

AIP Conf. Proc. 2848, 020022 (2023) https://doi.org/10.1063/5.0145073

Abstract

View articletitled, Assessment of codes recommendations for the evaluation of the seismic gap of buildings founded on different soil types

Open the PDF for in another window

Multifunctional composites for self-powered SHM applications

Lampros Koutsotolis; Angelos Voudouris Itskaras; George Karalis; Alkiviadis S. Paipetis

AIP Conf. Proc. 2848, 020023 (2023) https://doi.org/10.1063/5.0145054

Abstract

View articletitled, Multifunctional composites for self-powered SHM applications

Open the PDF for in another window

DIC based crack tip tracking system for multiaxial fatigue

Ondrej Kovarik; Katerina Jirouskova; Rami Bouaziz; Guruprasad Thimmappa Shetty; Hynek Lauschmann; Miroslav Karlik

AIP Conf. Proc. 2848, 020024 (2023) https://doi.org/10.1063/5.0145020

Abstract

View articletitled, DIC based crack tip tracking system for multiaxial fatigue

Open the PDF for in another window

Capitalized creep fracture mechanisms and ductility of nickel-based B1914 and INC738LC superalloys

Marie Kvapilová; Petr Král; Jiří Dvořák; Květa Kuchařová; Pavel Hutař; Václav Sklenička

AIP Conf. Proc. 2848, 020025 (2023) https://doi.org/10.1063/5.0145021

Abstract

View articletitled, Capitalized creep fracture mechanisms and ductility of nickel-based B1914 and INC738LC superalloys

Open the PDF for in another window

Self-healing capacity of differently cured concretes – Fracture characteristic development

Vlastimil Bilek; Lukas Prochazka; Filip Khestl; David Bujdos; Stanislav Seitl

AIP Conf. Proc. 2848, 020026 (2023) https://doi.org/10.1063/5.0145025

Abstract

View articletitled, Self-healing capacity of differently cured concretes – Fracture characteristic development

Open the PDF for in another window

Bottom-up manufacturing cost optimisation of composite aircraft structures: Manual layup vs. automated layup

Llewellyn Morse; Vincenzo Mallardo

AIP Conf. Proc. 2848, 020027 (2023) https://doi.org/10.1063/5.0145177

Abstract

View articletitled, Bottom-up manufacturing cost optimisation of composite aircraft structures: Manual layup vs. automated layup

Open the PDF for in another window

Short-to long-term deformation behavior of glassy polymers under cyclic uniaxial, torsional, and multiaxial loads

Sami Holopainen; Thierry Barriere; Xavier Gabrion; Abel Cherouat

AIP Conf. Proc. 2848, 020028 (2023) https://doi.org/10.1063/5.0145488

Abstract

View articletitled, Short-to long-term deformation behavior of glassy polymers under cyclic uniaxial, torsional, and multiaxial loads

Open the PDF for in another window

S-N curve and fatigue limit of CZ121 brass and BS 970 230M07 mild steel alloys using a thermographic method

Konstantinos Rousou; Andreas Kyprianou

AIP Conf. Proc. 2848, 020029 (2023) https://doi.org/10.1063/5.0145023

Abstract

View articletitled, S-N curve and fatigue limit of CZ121 brass and BS 970 230M07 mild steel alloys using a thermographic method

Open the PDF for in another window

Numerical studies of the elastic properties of ceramic foam by creation of the artificial microstructures after processing of computed tomographic images

Romana Piat; Vinit Vijay Deshpande

AIP Conf. Proc. 2848, 020030 (2023) https://doi.org/10.1063/5.0145033

Abstract

View articletitled, Numerical studies of the elastic properties of ceramic foam by creation of the artificial microstructures after processing of computed tomographic images

Open the PDF for in another window

Numerical modelling of thermal weakening effect on compressive strength of concrete

Timo Saksala; Reijo Kouhia

AIP Conf. Proc. 2848, 020031 (2023) https://doi.org/10.1063/5.0145015

Abstract

View articletitled, Numerical modelling of thermal weakening effect on compressive strength of concrete

Open the PDF for in another window

Separated phase-field algorithm for modelling of brittle fracture

Tomislav Lesičar; Tomislav Polančec; Karlo Seleš; Zdenko Tonković

AIP Conf. Proc. 2848, 020032 (2023) https://doi.org/10.1063/5.0145039

Abstract

View articletitled, Separated phase-field algorithm for modelling of brittle fracture

Open the PDF for in another window

Influence of the pressure gradient during combustion on the fatigue behaviour of an internal combustion engine piston

Luigi Bianco; Saverio Giulio Barbieri; Valerio Mangeruga; Matteo Giacopini; Fabrizio Fontana Perez

AIP Conf. Proc. 2848, 020033 (2023) https://doi.org/10.1063/5.0145319

Abstract

View articletitled, Influence of the pressure gradient during combustion on the fatigue behaviour of an internal combustion engine piston

Open the PDF for in another window

Analysis of the crack resistance of layered composite using the model of quasi-static crack growth

Vitalijs Pavelko

AIP Conf. Proc. 2848, 020034 (2023) https://doi.org/10.1063/5.0145134

Abstract

View articletitled, Analysis of the crack resistance of layered composite using the model of quasi-static crack growth

Open the PDF for in another window

Applications of a computational approach of interface and phase-field fracture to materials with inclusions

Roman Vodička

AIP Conf. Proc. 2848, 020035 (2023) https://doi.org/10.1063/5.0145049

Abstract

View articletitled, Applications of a computational approach of interface and phase-field fracture to materials with inclusions

Open the PDF for in another window

Augmented reality and decision making for structural health monitoring application

Kin Pui Tam; Francisco de Sá Rodrigues; Ilias Giannakeas; Zahra Sharif Khodaei

AIP Conf. Proc. 2848, 020036 (2023) https://doi.org/10.1063/5.0145059

Abstract

View articletitled, Augmented reality and decision making for structural health monitoring application

Open the PDF for in another window

Key features on the numerical modelling of T-nT and T-nC transverse tests of unidirectional carbon/epoxy cruciform specimens

P. L. Zumaquero; E. Correa; J. Justo; F. París

AIP Conf. Proc. 2848, 020037 (2023) https://doi.org/10.1063/5.0145037

Abstract

View articletitled, Key features on the numerical modelling of T-nT and T-nC transverse tests of unidirectional carbon/epoxy cruciform specimens

Open the PDF for in another window

A baseline free methodology for crack detection in metallic bolted joints

Sina Asadi; Zahra Sharif Khodaei; M. H. Aliabadi; A. Tesch

AIP Conf. Proc. 2848, 020038 (2023) https://doi.org/10.1063/5.0145046

Abstract

View articletitled, A baseline free methodology for crack detection in metallic bolted joints

Open the PDF for in another window

Microstructural identification of poly-crystalline materials using the Laplace domain DBEM formulation for SHM purposes

Massimiliano Marrazzo; Zahra Sharif Khodaei; M. H. Ferri Aliabadi

AIP Conf. Proc. 2848, 020039 (2023) https://doi.org/10.1063/5.0145028

Abstract

View articletitled, Microstructural identification of poly-crystalline materials using the Laplace domain DBEM formulation for SHM purposes

Open the PDF for in another window

Application of the digital clone framework for SHM systems through the building block scales

Ilias N. Giannakeas; Zahra Sharif Khodaei; Ferri M. H. Aliabadi

AIP Conf. Proc. 2848, 020040 (2023) https://doi.org/10.1063/5.0145674

Abstract

View articletitled, Application of the digital clone framework for SHM systems through the building block scales

Open the PDF for in another window

Structural health monitoring platform for industrial scale composite structures

Francisco de Sá Rodrigues; Aldyandra Hami Seno; Zahra Sharif Khodaei; Ferri Aliabadi

AIP Conf. Proc. 2848, 020041 (2023) https://doi.org/10.1063/5.0145027

Abstract

View articletitled, Structural health monitoring platform for industrial scale composite structures

Open the PDF for in another window

Flexural behaviour after tension-tension fatigue testing of cross-ply laminates made of carbon/epoxy ultra-thin plies

Serafín Sánchez-Carmona; Alberto Barroso; Elena Correa; Federico París

AIP Conf. Proc. 2848, 020042 (2023) https://doi.org/10.1063/5.0145041

Abstract

View articletitled, Flexural behaviour after tension-tension fatigue testing of cross-ply laminates made of carbon/epoxy ultra-thin plies

Open the PDF for in another window

Experimental study of the damage appearance and failure in cross-ply laminates manufactured with ultra-thin plies as a function of their stacking sequence

M. L. Velasco; E. Correa; F. París

AIP Conf. Proc. 2848, 020043 (2023) https://doi.org/10.1063/5.0145018

Abstract

View articletitled, Experimental study of the damage appearance and failure in cross-ply laminates manufactured with ultra-thin plies as a function of their stacking sequence

Open the PDF for in another window

Investigation into autoregressive model signal compression for damage localisation

Hongmin Zhu; Zahra Sharif Khodaei; M. H. Aliabadi

AIP Conf. Proc. 2848, 020044 (2023) https://doi.org/10.1063/5.0145029

Abstract

View articletitled, Investigation into autoregressive model signal compression for damage localisation

Open the PDF for in another window

Vibration-based damage detection of offshore wind turbine

Qiying Deng; Zahra Sharif Khodaei

AIP Conf. Proc. 2848, 020045 (2023) https://doi.org/10.1063/5.0145060

Abstract

View articletitled, Vibration-based damage detection of offshore wind turbine

Open the PDF for in another window

Development of 3D-printed flexible devices for strain sensing and damage detection

Valentin Buchinger; Zahra Sharif Khodaei; M. H. Aliabadi

AIP Conf. Proc. 2848, 020046 (2023) https://doi.org/10.1063/5.0145324

Abstract

View articletitled, Development of 3D-printed flexible devices for strain sensing and damage detection

Open the PDF for in another window

Multiscale modelling of the degradation and fracture of plain woven composites

L.I. Haolin; Zahra Sharif Khodaei; M. H. Ferri Aliabadi

AIP Conf. Proc. 2848, 020047 (2023) https://doi.org/10.1063/5.0145112

Abstract

View articletitled, Multiscale modelling of the degradation and fracture of plain woven composites

Open the PDF for in another window

Development of a cyber-physical SHM system for composite structures

Fatih Dagsever; Zahra Sharif Khodaei; M. H. Aliabadi

AIP Conf. Proc. 2848, 020048 (2023) https://doi.org/10.1063/5.0145026

Abstract

View articletitled, Development of a cyber-physical SHM system for composite structures

Open the PDF for in another window

The influence of temperature on barely visible impact damage detection

Feifei Ren; Ilias N. Giannakeas; Zahra Sharif Khodaei; Ferri M. H. Aliabadi

AIP Conf. Proc. 2848, 020049 (2023) https://doi.org/10.1063/5.0150876

Abstract

View articletitled, The influence of temperature on barely visible impact damage detection

Open the PDF for in another window

2D strain field reconstruction of composite plates based on distributed fibre optic sensors

Yingwu Li; Zahra Sharif Khodaei

AIP Conf. Proc. 2848, 020050 (2023) https://doi.org/10.1063/5.0145347

Abstract

View articletitled, 2D strain field reconstruction of composite plates based on distributed fibre optic sensors

Open the PDF for in another window

Damage analysis of two-way reinforced concrete slab subjected to blast loads

Sreenitya Singamsetty; Vasant Matsagar

AIP Conf. Proc. 2848, 020051 (2023) https://doi.org/10.1063/5.0145655

Abstract

View articletitled, Damage analysis of two-way reinforced concrete slab subjected to blast loads

Open the PDF for in another window

The 2D microcrack phase-field modelling of sintered steel

Zoran Tomić; Karlo Seleš; Zdenko Tonković; Tamara Aleksandrov Fabijanić; Tomislav Jarak; Nenad Gubeljak

AIP Conf. Proc. 2848, 020052 (2023) https://doi.org/10.1063/5.0145040

Abstract

View articletitled, The 2D microcrack phase-field modelling of sintered steel

Open the PDF for in another window

Sign up for alerts

RSS

Current Issue RSS Feed

Open Issues RSS Feed

Most Read
Most Cited

Social mediated crisis communication model: A solution for social media crisis?

S. N. A. Hamid, N. Ahmad, et al.

The effect of a balanced diet on improving the quality of life in malignant neoplasms

Yu. N. Melikova, A. S. Kuryndina, et al.

Design of a 100 MW solar power plant on wetland in Bangladesh

Apu Kowsar, Sumon Chandra Debnath, et al.

Issues

Cover Image

PRELIMINARY

ARTICLES

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only