Skip Nav Destination
Issues
29 November 2023
2021 5TH INTERNATIONAL CONFERENCE ON ENGINEERING AND APPLIED TECHNOLOGY (ICEAT)
27 October 2021
Banjarmasin, Indonesia
-
Cover Image
Cover Image
In this Issue
PRELIMINARY
CIVIL
The effect of faunus ater shell as filler in asphalt concrete wearing course (AC-WC) mixtures
AIP Conf. Proc. 2702, 020003 (2023)
https://doi.org/10.1063/5.0154763
Analysis of concrete mixture with marble waste material as a sand filler and bagasse ash as cement filler
AIP Conf. Proc. 2702, 020004 (2023)
https://doi.org/10.1063/5.0154438
Study on river morphology in Pabelan river after the Merapi eruption in 2010
AIP Conf. Proc. 2702, 020007 (2023)
https://doi.org/10.1063/5.0154924
Sustainable construction concepts on the contractor in Banda Aceh: A comprehension and application analysis
AIP Conf. Proc. 2702, 020010 (2023)
https://doi.org/10.1063/5.0155033
Review of infiltration rate in tropical coastal areas (a preliminary study in Papua)
AIP Conf. Proc. 2702, 020011 (2023)
https://doi.org/10.1063/5.0154925
Effect of adding steel fiber and viscocrete 8670-Mn tensile on the strength test of concrete
AIP Conf. Proc. 2702, 020012 (2023)
https://doi.org/10.1063/5.0154525
The effect of NaOH molarity on the performance of geopolymer concrete using fly ash from North Sumatera and Aceh
AIP Conf. Proc. 2702, 020013 (2023)
https://doi.org/10.1063/5.0185802
Potential of waste tire rubber and rice husk ash in self compacting concrete
AIP Conf. Proc. 2702, 020014 (2023)
https://doi.org/10.1063/5.0155314
Calcium oxide utilization analysis on chloride ion penetration of fly ash concrete
AIP Conf. Proc. 2702, 020015 (2023)
https://doi.org/10.1063/5.0155471
INDUSTRIAL
Factor analysis that affects work productivity (case study: Employee PDAM Pamekasan district)
AIP Conf. Proc. 2702, 030002 (2023)
https://doi.org/10.1063/5.0154377
Proposed material requirement planning on slippers products with the lot for lot approach
AIP Conf. Proc. 2702, 030003 (2023)
https://doi.org/10.1063/5.0154953
Hospital performance measurement based on intangible assets using Skandia navigator model: A case study
AIP Conf. Proc. 2702, 030006 (2023)
https://doi.org/10.1063/5.0185030
Reduction losses rate in filling process of stick ice product using the six sigma approach
AIP Conf. Proc. 2702, 030012 (2023)
https://doi.org/10.1063/5.0154297
Evaluating the service quality of third party logistics service provider using importance-performance analysis
AIP Conf. Proc. 2702, 030013 (2023)
https://doi.org/10.1063/5.0185485
Microplastics in the Indonesian small screen-printing industries: Environment and human possible risks
AIP Conf. Proc. 2702, 030015 (2023)
https://doi.org/10.1063/5.0156148
MECHANICAL
The influence of cutting parameters of the conventional lathe on the dimension precision of door hinge product
AIP Conf. Proc. 2702, 040001 (2023)
https://doi.org/10.1063/5.0154359
Flow numerical analysis in the process of pouring resin on pelton turbine blade molds using solidworks software
Sudirman Lubis; Munawar Alfansury Siregar; Wawan Septiawan Damanik; Edi Sarman Hasibuan; R. Pane; R. Astuti; M. Firza Alpi
AIP Conf. Proc. 2702, 040002 (2023)
https://doi.org/10.1063/5.0185486
Effect of soluble oil emulsion (SOE) oil coolant on surface roughness material steel ST37 in lathe grinding machine
AIP Conf. Proc. 2702, 040005 (2023)
https://doi.org/10.1063/5.0185768
Hydrogen gas generation through water electrolysis with Fragaria catalyst
AIP Conf. Proc. 2702, 040006 (2023)
https://doi.org/10.1063/5.0154964
Manufacturing processes: Skateboard from oil palm empty fruit bunch fiber composite
AIP Conf. Proc. 2702, 040007 (2023)
https://doi.org/10.1063/5.0154929
An experimental study of a sawdust machine feeder performance on a roof tile furnace
AIP Conf. Proc. 2702, 040010 (2023)
https://doi.org/10.1063/5.0158101
The effect of the tempering process on the hardness and impact strength on NS 4340 steel
AIP Conf. Proc. 2702, 040011 (2023)
https://doi.org/10.1063/5.0156743
Study of the utilization of thermoelectric generator and thermocline for improvement of solar still performance
AIP Conf. Proc. 2702, 040012 (2023)
https://doi.org/10.1063/5.0154948
Optimization of the type-L savonius wind turbine design
AIP Conf. Proc. 2702, 040013 (2023)
https://doi.org/10.1063/5.0154270
Engineering of multicore type cable isolation machine with the DMAIC method to reduce product scrap
AIP Conf. Proc. 2702, 040014 (2023)
https://doi.org/10.1063/5.0154296
Failure bushing small end connecting rod diesel engine 3500 series
AIP Conf. Proc. 2702, 040015 (2023)
https://doi.org/10.1063/5.0154252
Effect of baffle distance on heat exchanger performance
AIP Conf. Proc. 2702, 040016 (2023)
https://doi.org/10.1063/5.0155089
ELECTRICAL
Three phase radial generator knockdown
AIP Conf. Proc. 2702, 050001 (2023)
https://doi.org/10.1063/5.0156152
Experimental study of tilt angles on the performance of solar panels in medan’s
AIP Conf. Proc. 2702, 050003 (2023)
https://doi.org/10.1063/5.0154921
Thermoelectric utilization uses parabolic reflectors as an energy source
AIP Conf. Proc. 2702, 050004 (2023)
https://doi.org/10.1063/5.0180109
The using of ATmega 2560 micro-controller for LPG leakage detection
AIP Conf. Proc. 2702, 050005 (2023)
https://doi.org/10.1063/5.0154957
The design of automatic clothes drying device using an Arduino Uno
AIP Conf. Proc. 2702, 050008 (2023)
https://doi.org/10.1063/5.0154962
IoT based railroad portal security system prototype design
AIP Conf. Proc. 2702, 050009 (2023)
https://doi.org/10.1063/5.0180113
Optimizing the thermal energy consumption in heating systems of residential buildings: A case study
AIP Conf. Proc. 2702, 050010 (2023)
https://doi.org/10.1063/5.0185758
INFORMATICS
Literature review of regression testing technique as one of the ways of treatment software
AIP Conf. Proc. 2702, 060001 (2023)
https://doi.org/10.1063/5.0154345
Improving sustainability performance metrics using usability framework and WCAG 2.0 standard
AIP Conf. Proc. 2702, 060002 (2023)
https://doi.org/10.1063/5.0154327
A digital forensic analysis on mozilla firefox browser in Android operating system
AIP Conf. Proc. 2702, 060003 (2023)
https://doi.org/10.1063/5.0185760
Three dimensional Salah guide application based on augmented reality
AIP Conf. Proc. 2702, 060004 (2023)
https://doi.org/10.1063/5.0155060
Implementation of the multi-factor process evaluation method to determine mustahik priorities
AIP Conf. Proc. 2702, 060005 (2023)
https://doi.org/10.1063/5.0155030
Implementation of GPS for tracking of street vendor
Irvan Nauval; R. Arri Widyanto; Agus Setiawan; Nuryanto Nuryanto; Nugroho Agung Prabowo; Tuessi Ari Purnomo
AIP Conf. Proc. 2702, 060006 (2023)
https://doi.org/10.1063/5.0154610
Implementation of Hajj and Umrah Q&A system using case-based reasoning (CBR)
AIP Conf. Proc. 2702, 060007 (2023)
https://doi.org/10.1063/5.0185777
IT-based education online learning in the middle of Covid-19 pandemic
AIP Conf. Proc. 2702, 060008 (2023)
https://doi.org/10.1063/5.0154439
IMU-based joystick: Usage and interaction schemes in simulation game
AIP Conf. Proc. 2702, 060009 (2023)
https://doi.org/10.1063/5.0154940
Deep learning hyperparameter optimization on power transformers lifetime prediction
Ayu Ahadi Ningrum; Rudy Ansari; Ichwan Setiawan; Ihdalhubbi Maulida; Finki Dona Marleny; Nahdi Saubari; Muhammad Syahid Pebriadi; Windarsyah Windarsyah; Kamarudin Kamarudin; Mukhaimy Gazali
AIP Conf. Proc. 2702, 060010 (2023)
https://doi.org/10.1063/5.0154959
Image classification with support vector machine to identify Indonesian traditional building types
AIP Conf. Proc. 2702, 060012 (2023)
https://doi.org/10.1063/5.0181055
CHEMICAL
The effect of acrylic acid on the characteristics of chitosan-based superabsorbent hydrogen
AIP Conf. Proc. 2702, 070002 (2023)
https://doi.org/10.1063/5.0154952
The effect of clay and SiO2 composition on the physical properties of wall tile ceramic body
AIP Conf. Proc. 2702, 070003 (2023)
https://doi.org/10.1063/5.0181074
Carbon intensity-based approach for analyzing the environmental performance of nickel production in Indonesia
AIP Conf. Proc. 2702, 070005 (2023)
https://doi.org/10.1063/5.0154807
Effect of temperature on brackish water adsorption in Kemudi village using activated zeolite
AIP Conf. Proc. 2702, 070006 (2023)
https://doi.org/10.1063/5.0154683
GC-MS analysis of chemical compounds of coconut oil extract from dried coconut with low-temperature process
AIP Conf. Proc. 2702, 070008 (2023)
https://doi.org/10.1063/5.0155139
Mini review: Study of the synthesis of dimethyl carbonate and methyl carbamate through urea methanolysis route
AIP Conf. Proc. 2702, 070009 (2023)
https://doi.org/10.1063/5.0154545
Effectiveness of polyamide membrane from durian peel charcoal for fried chicken cooking oil purification
AIP Conf. Proc. 2702, 070010 (2023)
https://doi.org/10.1063/5.0180634
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.