Skip Nav Destination
Issues
25 April 2023
PROCEEDING OF INTERNATIONAL CONFERENCE ON ENERGY, MANUFACTURE, ADVANCED MATERIAL AND MECHATRONICS 2021
21 November 2021
Gowa, Indonesia
-
Cover Image
Cover Image
In this Issue
PRELIMINARY
ENERGY
Potential of seawater as a source of electrical energy based on electrochemical - Voltaic cells
AIP Conf. Proc. 2630, 020001 (2023)
https://doi.org/10.1063/5.0126051
Impact of the Covid 19 pandemic on electricity consumption in universities
AIP Conf. Proc. 2630, 020003 (2023)
https://doi.org/10.1063/5.0127867
20 kV submarine cable network as an alternative for electrical energy supply on Selayar Island
AIP Conf. Proc. 2630, 020004 (2023)
https://doi.org/10.1063/5.0127866
Design and development of kinetic energy conversion equipment from foot step into electrical energy
AIP Conf. Proc. 2630, 020005 (2023)
https://doi.org/10.1063/5.0126266
Evaluation of electricity consumption and electricity cost of one phase electromechanical and electronic kWh meter
AIP Conf. Proc. 2630, 020006 (2023)
https://doi.org/10.1063/5.0126482
The uses of lorentzian peak function for solar energy projection at Badung Regency, Bali Province
Anak Agung Ngurah Gde Sapteka; Anak Agung Ngurah Made Narottama; Kadek Amerta Yasa; I. Made Purbhawa; I. Ketut Suryawan; I. Gusti Agung Gede Wiadnyana
AIP Conf. Proc. 2630, 020007 (2023)
https://doi.org/10.1063/5.0126171
Experimental study of thermoelectric cooler box using phase change material for thermal energy storage
AIP Conf. Proc. 2630, 020008 (2023)
https://doi.org/10.1063/5.0127076
Performance analysis of curved blade breastshot water wheel with various types of blade material
AIP Conf. Proc. 2630, 020009 (2023)
https://doi.org/10.1063/5.0126084
Effect of blade material variation on electrical power produced by crooked blade water wheel
AIP Conf. Proc. 2630, 020010 (2023)
https://doi.org/10.1063/5.0126085
Temperature distribution in a single slope solar still using radial basis function method
AIP Conf. Proc. 2630, 020013 (2023)
https://doi.org/10.1063/5.0141956
Experimental investigation of stage modification on Savonius rotor
AIP Conf. Proc. 2630, 020015 (2023)
https://doi.org/10.1063/5.0125824
Heat transfer analysis in conventional single solar still solved by thermal resistance network model
AIP Conf. Proc. 2630, 020016 (2023)
https://doi.org/10.1063/5.0141953
Effect of dissolving ozone in biodiesel fuel on diesel engine performance
AIP Conf. Proc. 2630, 020018 (2023)
https://doi.org/10.1063/5.0126568
Effects of the additions of fin and suction on aerodynamic drags of vehicle model
AIP Conf. Proc. 2630, 020020 (2023)
https://doi.org/10.1063/5.0126979
Optimizing the role of new renewable energy (including nuclear power plant) on the expansion planning of power generation in West Kalimantan
Pramudya; Dian Galuh Cendrawati; Arief Heru Kuncoro; Suparman; Elok Satiti Amitayani; Slamet; Lazuwardi Imani
AIP Conf. Proc. 2630, 020021 (2023)
https://doi.org/10.1063/5.0126502
The effect of weight, speed, and mileage on the use of electric bicycle batteries
AIP Conf. Proc. 2630, 020024 (2023)
https://doi.org/10.1063/5.0125972
The experimental study of adsorption and evaporation temperature variation using zeolite as adsorber
AIP Conf. Proc. 2630, 020026 (2023)
https://doi.org/10.1063/5.0127305
Analysis of the effect of rear-window tilt on aerodynamic drags of sedan vehicle model
AIP Conf. Proc. 2630, 020027 (2023)
https://doi.org/10.1063/5.0126980
MANUFACTURE
Optimization parameter resistance spot welding dissimilar material-a review
AIP Conf. Proc. 2630, 030002 (2023)
https://doi.org/10.1063/5.0126219
Material preparation with sanding machine against welding nugget diameter, penetration and surface roughness on spot welding resistance connections
Enni Sulfiana; Muhammad Luthfi Sonjaya; Ariyanto; Muhammad Aqdar Fitrah; Iman Pradana A. Assagaf; A. Velahyati Baharuddin; Abdul Nasser Arifin
AIP Conf. Proc. 2630, 030003 (2023)
https://doi.org/10.1063/5.0142307
Ramie fiber woven composite: Effect of drilling time and number of plies on thrust force
AIP Conf. Proc. 2630, 030004 (2023)
https://doi.org/10.1063/5.0126400
Optimization of fabric cutting using three axis CNC laser cutting machine low power capacity
AIP Conf. Proc. 2630, 030011 (2023)
https://doi.org/10.1063/5.0126816
ADVANCED MATERIAL/MECHATRONIC
Construction strength evaluation of boiler economizer tube materials based on hardness value
AIP Conf. Proc. 2630, 040001 (2023)
https://doi.org/10.1063/5.0125978
Effect of hot rolling on structure and hardness of α/β Ti-6Al-6Nb alloy for orthopedic application
AIP Conf. Proc. 2630, 040002 (2023)
https://doi.org/10.1063/5.0128641
Effect of copper addition on aluminum matrix composite by powder metallurgy method
AIP Conf. Proc. 2630, 040003 (2023)
https://doi.org/10.1063/5.0126201
Ramie fiber woven composite: Effect of drill bit diameter and number of plies on delamination factor
AIP Conf. Proc. 2630, 040004 (2023)
https://doi.org/10.1063/5.0126401
Crashworthiness behavior of foam filled circular tubes for high speed train structures
AIP Conf. Proc. 2630, 040005 (2023)
https://doi.org/10.1063/5.0126738
Improving surface hardness and wear resistance of commercially pure titanium by plasma nitriding process
Agung Setyo Darmawan; Pramuko Ilmu Purboputro; Bibit Sugito; Bambang Waluyo Febriantoko; Agus Yulianto; Suprapto; Tjipto Sujitno
AIP Conf. Proc. 2630, 040006 (2023)
https://doi.org/10.1063/5.0125860
Effect of plasma nitrocarburizing process on surface hardness and surface roughness of commercially pure titanium
Agung Setyo Darmawan; Pramuko Ilmu Purboputro; Bibit Sugito; Bambang Waluyo Febriantoko; Agus Yulianto; Suprapto; Tjipto Sujitno
AIP Conf. Proc. 2630, 040007 (2023)
https://doi.org/10.1063/5.0125861
Biosilica forming by sol-gel extraction method of rice husk ash
AIP Conf. Proc. 2630, 040008 (2023)
https://doi.org/10.1063/5.0125764
Design of an arduino nano-based overvoltage protection system case study: “polytechnic STMI Jakarta”
AIP Conf. Proc. 2630, 040009 (2023)
https://doi.org/10.1063/5.0125990
Characteristics of sinusoidal vibration for liquefaction systems
AIP Conf. Proc. 2630, 040010 (2023)
https://doi.org/10.1063/5.0126186
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
With synthetic data towards part recognition generalized beyond the training instances
Paul Koch, Marian Schlüter, et al.