Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 2607, Issue 1

23 May 2023

All Issues

Cover Image

Cover Image

In this Issue

PRELIMINARY
SYMPOSIUM 01: EXTRUSION AND COATING
SYMPOSIUM 02: FILMS AND FIBERS
SYMPOSIUM 03: INJECTION MOLDING AND MICROMOLDING
SYMPOSIUM 04: POLYMER BLENDS AND COMPOUNDS
SYMPOSIUM 05: MODELING AND SIMULATION
SYMPOSIUM 06: POLYMER NANOCOMPOSITES
SYMPOSIUM 07: POLYMER FOAMS
SYMPOSIUM 08: RUBBERS AND ELASTOMERS
SYMPOSIUM 09: THERMOFORMING, BLOW MOLDING AND ROTOMOLDING
SYMPOSIUM 10: REACTIVE PROCESSING
SYMPOSIUM 11: ADDITIVE MANUFACTURING
SYMPOSIUM 12: BIOPOLYMERS AND PROCESSESS/BIOMEDICAL
SYMPOSIUM 14: RECYCLING AND SUSTAINABLE POLYMERS
SYMPOSIUM 15: FLEXIBLE ELECTRONICS POLYMERS AND PROCESSES
SYMPOSIUM 16: HONORARY SYMPOSIUM FOR PROFS CARREAU, KAMAL AND VLACHOPOULOS

PRELIMINARY

Preface: 36th International Conference of the Polymer Processing Society (PPS)

AIP Conf. Proc. 2607, 010001 (2023) https://doi.org/10.1063/12.0015377

View articletitled, Preface: 36th International Conference of the Polymer Processing Society (PPS)

Open the PDF for in another window

SYMPOSIUM 01: EXTRUSION AND COATING

Melt blended PEEK/Fe composites

Sean Duffy; Mozaffar Mokhtari; Edward Archer; Alistair McIlhagger

AIP Conf. Proc. 2607, 020001 (2023) https://doi.org/10.1063/5.0136251

Abstract

View articletitled, Melt blended PEEK/Fe composites

Open the PDF for in another window

Predicting the pumping capability of single-screw extruders: A comparison of two- and three-dimensional modeling approaches

Christian Marschik; Wolfgang Roland

AIP Conf. Proc. 2607, 020002 (2023) https://doi.org/10.1063/5.0136774

Abstract

View articletitled, Predicting the pumping capability of single-screw extruders: A comparison of two- and three-dimensional modeling approaches

Open the PDF for in another window

Predicting the rotation speed of mixing sleeves in single-screw extrusion by means of CFD-simulation

Mirco Janßen; Reinhard Schiffers

AIP Conf. Proc. 2607, 020003 (2023) https://doi.org/10.1063/5.0135977

Abstract

View articletitled, Predicting the rotation speed of mixing sleeves in single-screw extrusion by means of CFD-simulation

Open the PDF for in another window

Characterization of the rheological behavior of thermotropic liquid crystal polymers related to extrusion processes

C. Kneidinger; A. Selinger; G. Zitzenbacher

AIP Conf. Proc. 2607, 020004 (2023) https://doi.org/10.1063/5.0135842

Abstract

View articletitled, Characterization of the rheological behavior of thermotropic liquid crystal polymers related to extrusion processes

Open the PDF for in another window

Sensor-based process monitoring by inline bubble detection in blown film extrusion

Christoph Dohm; Reinhard Schiffers

AIP Conf. Proc. 2607, 020005 (2023) https://doi.org/10.1063/5.0137076

Abstract

View articletitled, Sensor-based process monitoring by inline bubble detection in blown film extrusion

Open the PDF for in another window

Calibration of a contact model for DEM simulations of grooved feed sections of single screw extruders

Florian Brüning; Volker Schöppner

AIP Conf. Proc. 2607, 020006 (2023) https://doi.org/10.1063/5.0135858

Abstract

View articletitled, Calibration of a contact model for DEM simulations of grooved feed sections of single screw extruders

Open the PDF for in another window

Compounding of glass-fiber-filled polymers using a quad screw extruder

Thamer Aldhafeeri; Carol Forance Barry

AIP Conf. Proc. 2607, 020007 (2023) https://doi.org/10.1063/5.0135878

Abstract

View articletitled, Compounding of glass-fiber-filled polymers using a quad screw extruder

Open the PDF for in another window

Experimental determination of the residence time distribution in blown film extrusion using colorimetry

Christoph Dohm; Reinhard Schiffers

AIP Conf. Proc. 2607, 020008 (2023) https://doi.org/10.1063/5.0137075

Abstract

View articletitled, Experimental determination of the residence time distribution in blown film extrusion using colorimetry

Open the PDF for in another window

Investigations of an atmospheric pressure plasma treatment of plastic melts

Pia Burandt; Reinhard Schiffers

AIP Conf. Proc. 2607, 020009 (2023) https://doi.org/10.1063/5.0142765

Abstract

View articletitled, Investigations of an atmospheric pressure plasma treatment of plastic melts

Open the PDF for in another window

Reusing simulation data: A systematic approach to speed-up extrusion die design

J. Kummerow; R. Schiffers

AIP Conf. Proc. 2607, 020010 (2023) https://doi.org/10.1063/5.0136922

Abstract

View articletitled, Reusing simulation data: A systematic approach to speed-up extrusion die design

Open the PDF for in another window

Characterization of interdiffusion between different co-extruded polymers via confocal Raman microscopy

Claudia Leimhofer; Alexander Hammer; Wolfgang Roland; Sabine Hild

AIP Conf. Proc. 2607, 020011 (2023) https://doi.org/10.1063/5.0137361

Abstract

View articletitled, Characterization of interdiffusion between different co-extruded polymers via confocal Raman microscopy

Open the PDF for in another window

SYMPOSIUM 02: FILMS AND FIBERS

Tensile and rheological characterizations of biaxially stretched polypropylene/multi-walled carbon nanotube composite

Gulstan S. Ezat; Adrian L. Kelly; Mansour Youseffi; Phil D. Coates

AIP Conf. Proc. 2607, 030001 (2023) https://doi.org/10.1063/5.0136348

Abstract

View articletitled, Tensile and rheological characterizations of biaxially stretched polypropylene/multi-walled carbon nanotube composite

Open the PDF for in another window

SYMPOSIUM 03: INJECTION MOLDING AND MICROMOLDING

Influence of pigments on crystallisation, shrinkage, and mechanical properties of LDPE, HDPE, and PP

Jawad Ullah; Dorian Dixon; Eileen Harkin-Jones; Ciaran Magee

AIP Conf. Proc. 2607, 040001 (2023) https://doi.org/10.1063/5.0135936

Abstract

View articletitled, Influence of pigments on crystallisation, shrinkage, and mechanical properties of LDPE, HDPE, and PP

Open the PDF for in another window

Micro-assembly injection molding

Matthieu Fischer; Ines Kuehnert

AIP Conf. Proc. 2607, 040002 (2023) https://doi.org/10.1063/5.0136789

Abstract

View articletitled, Micro-assembly injection molding

Open the PDF for in another window

Wear phenomenon in injection molding

Zidar David; Friesenbichler Walter; Blutmager Andreas

AIP Conf. Proc. 2607, 040003 (2023) https://doi.org/10.1063/5.0135808

Abstract

View articletitled, Wear phenomenon in injection molding

Open the PDF for in another window

Interest of an annular geometry compared to cylindrical one in the thermo-rheological analysis of a polymer flow

Qiao Lin; Nadine Allanic; Rémi Deterre; Pierre Mousseau; Yves Béreaux; Manuel Girault

AIP Conf. Proc. 2607, 040004 (2023) https://doi.org/10.1063/5.0135827

Abstract

View articletitled, Interest of an annular geometry compared to cylindrical one in the thermo-rheological analysis of a polymer flow

Open the PDF for in another window

In-process visualization of kinetic and thermal behaviors of high thermal conductivity PPS

Akifumi Kurita; Yohei Yoshimura; Makoto Suzuki; Hidetoshi Yokoi; Yusuke Kajihara

AIP Conf. Proc. 2607, 040005 (2023) https://doi.org/10.1063/5.0135767

Abstract

View articletitled, In-process visualization of kinetic and thermal behaviors of high thermal conductivity PPS

Open the PDF for in another window

Benefit of fused-filament-fabricated (FFF) mold inserts made of plastics for injection molding of glass fiber reinforced technical thermoplastics

Fabian Kurz; Simone Lake; Michael Stricker; Fabian Jasser

AIP Conf. Proc. 2607, 040006 (2023) https://doi.org/10.1063/5.0135815

Abstract

View articletitled, Benefit of fused-filament-fabricated (FFF) mold inserts made of plastics for injection molding of glass fiber reinforced technical thermoplastics

Open the PDF for in another window

Improved heat transfer for fluid-based dynamic temperature controlled injection molds

Fabian Jasser; Michael Stricker; Simone Lake; Fabian Kurz

AIP Conf. Proc. 2607, 040007 (2023) https://doi.org/10.1063/5.0135816

Abstract

View articletitled, Improved heat transfer for fluid-based dynamic temperature controlled injection molds

Open the PDF for in another window

SYMPOSIUM 04: POLYMER BLENDS AND COMPOUNDS

Processing of polymer blends by twin-screw extrusion and reactive blending: A route towards the valorization of plastic food packaging waste

Geraldine Cabrera; Michel Bouquey; Rigoberto Ibarra-Gomez; François Lefort; Skander Mani; Thierry Falher

AIP Conf. Proc. 2607, 050001 (2023) https://doi.org/10.1063/5.0136834

Abstract

View articletitled, Processing of polymer blends by twin-screw extrusion and reactive blending: A route towards the valorization of plastic food packaging waste

Open the PDF for in another window

Designing efficient characterization technology of TGA and FTIR for compounding grade: Properties and design color selection

Jamal Al Sadi

AIP Conf. Proc. 2607, 050002 (2023) https://doi.org/10.1063/5.0135789

Abstract

View articletitled, Designing efficient characterization technology of TGA and FTIR for compounding grade: Properties and design color selection

Open the PDF for in another window

Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder

Matthias Altepeter; Sven Wanke; Volker Schöppner

AIP Conf. Proc. 2607, 050003 (2023) https://doi.org/10.1063/5.0135824

Abstract

View articletitled, Analysis and modelling of the material degradation of polypropylene on the co-rotating twin-screw extruder

Open the PDF for in another window

Influence of fiber geometry and sizing on glass fiber breakage

Franziska Bürenhaus; Elmar Moritzer

AIP Conf. Proc. 2607, 050004 (2023) https://doi.org/10.1063/5.0135843

Abstract

View articletitled, Influence of fiber geometry and sizing on glass fiber breakage

Open the PDF for in another window

Sigma blade mixing with a high-viscous Non-Newtonian fluid

Michael Roland Larsen; Simone Christensen; Inge Aagaard; Adrian Defante; Tobias Ottsen; Jesper Henri Hattel; Jon Spangenberg

AIP Conf. Proc. 2607, 050005 (2023) https://doi.org/10.1063/5.0135852

Abstract

View articletitled, Sigma blade mixing with a high-viscous Non-Newtonian fluid

Open the PDF for in another window

SYMPOSIUM 05: MODELING AND SIMULATION

Dispersive mixing in an internal mixer by a CFD-DEM approach

Graziano Frungieri; Gianluca Boccardo; Antonio Buffo; Hossein Ali Karimi-Varzaneh; Daniele Marchisio; Marco Vanni

AIP Conf. Proc. 2607, 060001 (2023) https://doi.org/10.1063/5.0137732

Abstract

View articletitled, Dispersive mixing in an internal mixer by a CFD-DEM approach

Open the PDF for in another window

Investigation of shear rates in twin-screw extruder using CFD-simulation

Hatice Malatyali; Volker Schöppner

AIP Conf. Proc. 2607, 060002 (2023) https://doi.org/10.1063/5.0139630

Abstract

View articletitled, Investigation of shear rates in twin-screw extruder using CFD-simulation

Open the PDF for in another window

Fractal geometry of mixing

Miron Kaufman; Robert White; Joshua Clark; Petru S. Fodor

AIP Conf. Proc. 2607, 060003 (2023) https://doi.org/10.1063/5.0135742

Abstract

View articletitled, Fractal geometry of mixing

Open the PDF for in another window

Analysis of the melting behavior of polyethylene and polystyrene in co-kneaders

Johannes Rudloff; Rebecca Wolff; Marieluise Lang; Thomas Hochrein; Martin Bastian

AIP Conf. Proc. 2607, 060004 (2023) https://doi.org/10.1063/5.0135884

Abstract

View articletitled, Analysis of the melting behavior of polyethylene and polystyrene in co-kneaders

Open the PDF for in another window

A numerical study of interdiffusion processes at polymer-polymer interfaces

Alexander Hammer; Wolfgang Roland; Claudia Leimhofer; Sabine Hild; Georg Steinbichler

AIP Conf. Proc. 2607, 060005 (2023) https://doi.org/10.1063/5.0135820

Abstract

View articletitled, A numerical study of interdiffusion processes at polymer-polymer interfaces

Open the PDF for in another window

Analyzing the flow characteristics of co-rotating twin-screw extruder conveying elements

Ursula Stritzinger; Wolfgang Roland; Hanny Albrecht; Bernhard Löw-Baselli; Georg Steinbichler

AIP Conf. Proc. 2607, 060006 (2023) https://doi.org/10.1063/5.0136575

Abstract

View articletitled, Analyzing the flow characteristics of co-rotating twin-screw extruder conveying elements

Open the PDF for in another window

Investigation of the influence of the cross-linking reaction on the prediction quality of the mold filling simulation

Nils Schmeißer; Thomas Zentgraf; Michael Gehde

AIP Conf. Proc. 2607, 060007 (2023) https://doi.org/10.1063/5.0135887

Abstract

View articletitled, Investigation of the influence of the cross-linking reaction on the prediction quality of the mold filling simulation

Open the PDF for in another window

Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder

Daniel Stueker; Volker Schoeppner

AIP Conf. Proc. 2607, 060008 (2023) https://doi.org/10.1063/5.0138943

Abstract

View articletitled, Simplified numerical calculation of the isothermal, three-dimensional, Non-Newtonian flow characteristics of single-screw melt-extruder

Open the PDF for in another window

An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder

Daniel Stueker; Volker Schoeppner

AIP Conf. Proc. 2607, 060009 (2023) https://doi.org/10.1063/5.0138944

Abstract

View articletitled, An approach for the numerical calculation of the non-isothermal pressure-throughput-characteristics of single screw melt-extruder

Open the PDF for in another window

Investigation of the pressure-throughput behaviour of different faceted mixer geometries on an analytical and simulative basis

Maximilian Frank; Viola Hollenhorst; Volker Schöppner

AIP Conf. Proc. 2607, 060010 (2023) https://doi.org/10.1063/5.0135825

Abstract

View articletitled, Investigation of the pressure-throughput behaviour of different faceted mixer geometries on an analytical and simulative basis

Open the PDF for in another window

Design of a test bench for measuring the degradation behavior of plastics during processing

Christoph Schall; Volker Schöppner

AIP Conf. Proc. 2607, 060011 (2023) https://doi.org/10.1063/5.0136795

Abstract

View articletitled, Design of a test bench for measuring the degradation behavior of plastics during processing

Open the PDF for in another window

Influence of rheological characterization on modeling of volume retardation processes

Felix Baumgärtner; Christian Bonten

AIP Conf. Proc. 2607, 060012 (2023) https://doi.org/10.1063/5.0137031

Abstract

View articletitled, Influence of rheological characterization on modeling of volume retardation processes

Open the PDF for in another window

An analytical approach to calculate the orientation of liquid crystal polymers in a slit die flow

Gernot Zitzenbacher

AIP Conf. Proc. 2607, 060013 (2023) https://doi.org/10.1063/5.0135942

Abstract

View articletitled, An analytical approach to calculate the orientation of liquid crystal polymers in a slit die flow

Open the PDF for in another window

Investigating the surface layer formation of injection molded mineral-filled PA using numerical simulation

Marius Janßen; Reinhard Schiffers

AIP Conf. Proc. 2607, 060014 (2023) https://doi.org/10.1063/5.0136643

Abstract

View articletitled, Investigating the surface layer formation of injection molded mineral-filled PA using numerical simulation

Open the PDF for in another window

Modelling ferromagnetic fiber alignment in viscous fluids under static magnetic fields

Cédric De Schryver; Dries Vanoost; Bart Buffel; Davy Pissoort; Frederik Desplentere

AIP Conf. Proc. 2607, 060015 (2023) https://doi.org/10.1063/5.0135916

Abstract

View articletitled, Modelling ferromagnetic fiber alignment in viscous fluids under static magnetic fields

Open the PDF for in another window

Die design assisted by CFD for extrusion foam of starch-based mixtures

Daniele Tammaro; Gaetano D’Avino; Gerald Schennink; Jan Wietze Huisman; Nynke Zandstra; Mark Geerts; Fresia Alvarado Chacon; Pier Luca Maffettone

AIP Conf. Proc. 2607, 060016 (2023) https://doi.org/10.1063/5.0136491

Abstract

View articletitled, Die design assisted by CFD for extrusion foam of starch-based mixtures

Open the PDF for in another window

SYMPOSIUM 06: POLYMER NANOCOMPOSITES

Mechanical and tribological properties of glass fiber reinforced bismaleimide-based polyimide composites

Hidenori Oi; Yosuke Nishitani

AIP Conf. Proc. 2607, 070001 (2023) https://doi.org/10.1063/5.0135899

Abstract

View articletitled, Mechanical and tribological properties of glass fiber reinforced bismaleimide-based polyimide composites

Open the PDF for in another window

DFT and MC investigation of EDOT on honeycomb borophene as potential energy storage material

Gbolahan Joseph Adekoya; Emmanuel Rotimi Sadiku; Yskandar Hamam; Bonex Wakufwa Mwakikunga; Suprakas Sinha Ray

AIP Conf. Proc. 2607, 070002 (2023) https://doi.org/10.1063/5.0136110

Abstract

View articletitled, DFT and MC investigation of EDOT on honeycomb borophene as potential energy storage material

Open the PDF for in another window

Interfacial shear strength of glass fiber reinforced polyketone measured by the single fiber pullout test

Adam Pearson; Weijian Liao; Yasamin Kazemi; Adel Kakroodi; Ahmed Hammami; Hani Naguib

AIP Conf. Proc. 2607, 070003 (2023) https://doi.org/10.1063/5.0136855

Abstract

View articletitled, Interfacial shear strength of glass fiber reinforced polyketone measured by the single fiber pullout test

Open the PDF for in another window

Effect of extrusion cycles on the dispersion and properties of polypropylene/multi-walled carbon nanotube composite

Gulstan S. Ezat; Adrian L. Kelly; Mansour Youseffi; Phil D. Coates

AIP Conf. Proc. 2607, 070004 (2023) https://doi.org/10.1063/5.0136349

Abstract

View articletitled, Effect of extrusion cycles on the dispersion and properties of polypropylene/multi-walled carbon nanotube composite

Open the PDF for in another window

Halloysite nanotube loaded polyamide nanocomposites: Structural, morphological, mechanical, thermal and processing behaviors

Alinda Öykü Akar; Ümit Hakan Yıldız; Ümit Tayfun

AIP Conf. Proc. 2607, 070005 (2023) https://doi.org/10.1063/5.0135873

Abstract

View articletitled, Halloysite nanotube loaded polyamide nanocomposites: Structural, morphological, mechanical, thermal and processing behaviors

Open the PDF for in another window

Multi-scale modeling of uniaxial deformation of electroconductive polypropylene/nanoparticles composites reinforced with woven glass fiber

Oleg V. Lebedev; Alexander Ozerin; Tikhon Kurkin; Anton Trofimov

AIP Conf. Proc. 2607, 070006 (2023) https://doi.org/10.1063/5.0135838

Abstract

View articletitled, Multi-scale modeling of uniaxial deformation of electroconductive polypropylene/nanoparticles composites reinforced with woven glass fiber

Open the PDF for in another window

Easy processing antistatic PEEK/expanded graphite composites

Mozaffar Mokhtari; Sean Duffy; Edward Archer; Eileen Harkin-Jones; Noel Bloomfield; Alberto Lario Cabello; Alistair McIlhagger

AIP Conf. Proc. 2607, 070007 (2023) https://doi.org/10.1063/5.0135864

Abstract

View articletitled, Easy processing antistatic PEEK/expanded graphite composites

Open the PDF for in another window

Effect of electrospinning parameters on morphology of polyvinylidene fluoride (PVDF) nanofibers

Utkarsh; Muhammad Tariq; Nabeel Ahmed Syed; Remon Pop-Iliev; Ghaus Rizvi

AIP Conf. Proc. 2607, 070008 (2023) https://doi.org/10.1063/5.0147758

Abstract

View articletitled, Effect of electrospinning parameters on morphology of polyvinylidene fluoride (PVDF) nanofibers

Open the PDF for in another window

Shape memory behavior and physical properties of peroxide X-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites

Ezgi Bicer; Gulsen Kurt Demir; Mehmet Kodal; Guralp Ozkoc

AIP Conf. Proc. 2607, 070009 (2023) https://doi.org/10.1063/5.0136167

Abstract

View articletitled, Shape memory behavior and physical properties of peroxide X-linked LLDPE-C6/POSS and LLDPE-C8/POSS composites

Open the PDF for in another window

Enhanced properties of PBAT by incorporating CNC

Emre Vatansever; Dogan Arslan; Deniz Sema Sarul; Ali Durmus; Mohammadreza Nofar

AIP Conf. Proc. 2607, 070010 (2023) https://doi.org/10.1063/5.0135788

Abstract

View articletitled, Enhanced properties of PBAT by incorporating CNC

Open the PDF for in another window

The effect of organoclay in combination with other polymer processing aids on the extrusion of polypropylene

Kiana Entezami; Milad Mehranpour; Hossain Nazockdast

AIP Conf. Proc. 2607, 070011 (2023) https://doi.org/10.1063/5.0136490

Abstract

View articletitled, The effect of organoclay in combination with other polymer processing aids on the extrusion of polypropylene

Open the PDF for in another window

The CNC dispersion quality in various PLA grades

Emre Vatansever; Dogan Arslan; Deniz Sema Sarul; Mohammadreza Nofar

AIP Conf. Proc. 2607, 070012 (2023) https://doi.org/10.1063/5.0135790

Abstract

View articletitled, The CNC dispersion quality in various PLA grades

Open the PDF for in another window

Adsorption of EDOT on graphene: DFT and MC studies

Gbolahan Joseph Adekoya; Oladipo Folorunso; Oluwasegun Chijioke Adekoya; Yskandar Hamam; Emmanuel Rotimi Sadiku; Suprakas Sinha Ray

AIP Conf. Proc. 2607, 070013 (2023) https://doi.org/10.1063/5.0136103

Abstract

View articletitled, Adsorption of EDOT on graphene: DFT and MC studies

Open the PDF for in another window

Effect of PPO-g-MA on electrical conductivity enhancement of PA6/PPO/CNT/CCB nanocomposites

Mohammad Farhadpour; Gholamreza Pircheraghi; Reza Bagheri

AIP Conf. Proc. 2607, 070014 (2023) https://doi.org/10.1063/5.0135768

Abstract

View articletitled, Effect of PPO-g-MA on electrical conductivity enhancement of PA6/PPO/CNT/CCB nanocomposites

Open the PDF for in another window

SYMPOSIUM 07: POLYMER FOAMS

3D foam printing by physical blowing agent

Daniele Tammaro; Ernesto Di Maio; Pier Luca Maffettone

AIP Conf. Proc. 2607, 080001 (2023) https://doi.org/10.1063/5.0137899

Abstract

View articletitled, 3D foam printing by physical blowing agent

Open the PDF for in another window

Elongational viscosity analysis and modeling of a modified polylactide for foaming applications

Tobias Schaible; Christian Bonten

AIP Conf. Proc. 2607, 080002 (2023) https://doi.org/10.1063/5.0137032

Abstract

View articletitled, Elongational viscosity analysis and modeling of a modified polylactide for foaming applications

Open the PDF for in another window

SYMPOSIUM 08: RUBBERS AND ELASTOMERS

Accelerated ageing behaviour of poly ether block amide (PEBAX) and polybutylene terephthalate polyester (arnitel) thermoplastic elastomers

Jawad Ullah; Dorian Dixon; Abu Saifullah; Thomas Dooher; Ciaran Magee

AIP Conf. Proc. 2607, 090001 (2023) https://doi.org/10.1063/5.0135938

Abstract

View articletitled, Accelerated ageing behaviour of poly ether block amide (PEBAX) and polybutylene terephthalate polyester (arnitel) thermoplastic elastomers

Open the PDF for in another window

SYMPOSIUM 09: THERMOFORMING, BLOW MOLDING AND ROTOMOLDING

Optimized sheet temperature distribution for thermoforming

Bart Buffel; Frederik Desplentere

AIP Conf. Proc. 2607, 100001 (2023) https://doi.org/10.1063/5.0137381

Abstract

View articletitled, Optimized sheet temperature distribution for thermoforming

Open the PDF for in another window

Simulation-based analysis of geometry-dependent wall thickness distribution in corrugated pipes

Hanny Albrecht; Wolfgang Roland; Hannes Dirnberger; Christian Fiebig; Georg Steinbichler

AIP Conf. Proc. 2607, 100002 (2023) https://doi.org/10.1063/5.0135891

Abstract

View articletitled, Simulation-based analysis of geometry-dependent wall thickness distribution in corrugated pipes

Open the PDF for in another window

Polymer-fibre characterisation and its role in optimum sintering and densification in rotational moulding

D. Castellanos; M. McCourt; P. Martin; M. Kearns; J. Butterfield; P. Cassidy

AIP Conf. Proc. 2607, 100003 (2023) https://doi.org/10.1063/5.0136727

Abstract

View articletitled, Polymer-fibre characterisation and its role in optimum sintering and densification in rotational moulding

Open the PDF for in another window

Rotational moulding of poly-lactic acid; effect of plasticization and degree of crystallinity

Antonio Greco; Francesca Ferrari; Alfonso Maffezzoli

AIP Conf. Proc. 2607, 100004 (2023) https://doi.org/10.1063/5.0135826

Abstract

View articletitled, Rotational moulding of poly-lactic acid; effect of plasticization and degree of crystallinity

Open the PDF for in another window

An analysis of rotationally moulded sandwich structure’s repeated impact properties

Abu Saifullah; Ben Thomas; Robert Cripps; Kamran Tabeshfar; Lei Wang

AIP Conf. Proc. 2607, 100005 (2023) https://doi.org/10.1063/5.0135776

Abstract

View articletitled, An analysis of rotationally moulded sandwich structure’s repeated impact properties

Open the PDF for in another window

Modelling of the heating stage in rotational moulding by using a dynamic 1D thermal finite difference technique

Maxim Vandaele; Bart Buffel; Kristof Callewaert; Jeroen Martens; Carl Six; Frederik Desplentere; Wim Thielemans

AIP Conf. Proc. 2607, 100006 (2023) https://doi.org/10.1063/5.0136660

Abstract

View articletitled, Modelling of the heating stage in rotational moulding by using a dynamic 1D thermal finite difference technique

Open the PDF for in another window

SYMPOSIUM 10: REACTIVE PROCESSING

Analysis of defects in the cylindrical area of a type-IV hydrogen pressure vessel on the mechanical laminate properties

Christian Hopmann; Robert Müller; Daniel Schneider; Kai Fischer

AIP Conf. Proc. 2607, 110001 (2023) https://doi.org/10.1063/5.0135851

Abstract

View articletitled, Analysis of defects in the cylindrical area of a type-IV hydrogen pressure vessel on the mechanical laminate properties

Open the PDF for in another window

Development of an impact-resistant block copolymer based on PHB

S. Lajewski; L. Vosseler; C. Bonten

AIP Conf. Proc. 2607, 110002 (2023) https://doi.org/10.1063/5.0147616

Abstract

View articletitled, Development of an impact-resistant block copolymer based on PHB

Open the PDF for in another window

SYMPOSIUM 11: ADDITIVE MANUFACTURING

Analysis of the energy input during the sintering process of polyamide 12

Moritz Grünewald; Stephanie Baumann; Kevin Popp; Marieluise Lang; Martin Bastian; Shoya Mohseni-Mofidi; Claas Bierwisch; Johannes Rudloff

AIP Conf. Proc. 2607, 120001 (2023) https://doi.org/10.1063/5.0135798

Abstract

View articletitled, Analysis of the energy input during the sintering process of polyamide 12

Open the PDF for in another window

Direct printing of high-performance thermoplastic connection and stiffening elements by fused filament fabrication

Andressa Seefeldt; Marcel Dippold; Julia Gensel; Thomas Neumeyer; Volker Altstädt

AIP Conf. Proc. 2607, 120002 (2023) https://doi.org/10.1063/5.0136137

Abstract

View articletitled, Direct printing of high-performance thermoplastic connection and stiffening elements by fused filament fabrication

Open the PDF for in another window

Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects

Muammel M. Hanon; László Zsidai

AIP Conf. Proc. 2607, 120003 (2023) https://doi.org/10.1063/5.0135763

Abstract

View articletitled, Investigation on the accuracy, hardness, and surface roughness of photopolymerization 3D printing technique objects

Open the PDF for in another window

Design of nozzles for surface mount technologies produced by additive manufacturing

Álvaro M. Sampaio; Ana C. Miranda; António J. Pontes

AIP Conf. Proc. 2607, 120004 (2023) https://doi.org/10.1063/5.0136200

Abstract

View articletitled, Design of nozzles for surface mount technologies produced by additive manufacturing

Open the PDF for in another window

Multi-objective designing of 3D printed polycaprolactone/nano-hydroxyapatite/chitin-nano-whisker nanocomposite bone tissue scaffolds using genetic programing based meta-modeling

Pedram Karimipour-Fard; Azam Asilian Bidgoli; Shahryar Rahnamayan; Remon Pop-Iliev; Ghaus Rizvi

AIP Conf. Proc. 2607, 120005 (2023) https://doi.org/10.1063/5.0135749

Abstract

View articletitled, Multi-objective designing of 3D printed polycaprolactone/nano-hydroxyapatite/chitin-nano-whisker nanocomposite bone tissue scaffolds using genetic programing based meta-modeling

Open the PDF for in another window

Biodegradation assessment of 3D printed polycaprolactone/nano-hydroxyapatite/chitin-nano-whisker nanocomposites

Pedram Karimipour-Fard; Remon Pop-Iliev; Ghaus Rizvi

AIP Conf. Proc. 2607, 120006 (2023) https://doi.org/10.1063/5.0135750

Abstract

View articletitled, Biodegradation assessment of 3D printed polycaprolactone/nano-hydroxyapatite/chitin-nano-whisker nanocomposites

Open the PDF for in another window

Particle size distribution of short glass fibers in powder bed fusion of polymers using filled systems

Lydia Lanzl; Dietmar Drummer

AIP Conf. Proc. 2607, 120007 (2023) https://doi.org/10.1063/5.0137105

Abstract

View articletitled, Particle size distribution of short glass fibers in powder bed fusion of polymers using filled systems

Open the PDF for in another window

Experimentally validated numerical modeling of polymer melting and flow in material extrusion-based additive manufacturing

Rebecca Wolff; Hogenrich Damanik; Fatima Arooj; Stefan Turek; Johannes Rudloff; Benjamin Baudrit; Thomas Hochrein; Martin Bastian

AIP Conf. Proc. 2607, 120008 (2023) https://doi.org/10.1063/5.0135819

Abstract

View articletitled, Experimentally validated numerical modeling of polymer melting and flow in material extrusion-based additive manufacturing

Open the PDF for in another window

Influence of glass fibers on the processability and mechanical properties of PP homopolymer for fused filament fabrication (FFF)

Julia Utz; Nico Geis; Maximilian Baur; Holger Ruckdäschel

AIP Conf. Proc. 2607, 120009 (2023) https://doi.org/10.1063/5.0136659

Abstract

View articletitled, Influence of glass fibers on the processability and mechanical properties of PP homopolymer for fused filament fabrication (FFF)

Open the PDF for in another window

SYMPOSIUM 12: BIOPOLYMERS AND PROCESSESS/BIOMEDICAL

Enhancement of biodegradability of polylactides by γ-ray irradiation

Foram Dave; Josemon Jacob; Asokan Kandasami; Marion McAfee; David Tormey

AIP Conf. Proc. 2607, 130001 (2023) https://doi.org/10.1063/5.0135785

Abstract

View articletitled, Enhancement of biodegradability of polylactides by γ-ray irradiation

Open the PDF for in another window

Polymerization of trans-resveratrol via condensation with sebacic acid

Liege P. S. Reinert; Rogério A. Gariani; Sérgio H. Pezzin

AIP Conf. Proc. 2607, 130002 (2023) https://doi.org/10.1063/5.0135741

Abstract

View articletitled, Polymerization of <em>trans</em>-resveratrol via condensation with sebacic acid

Open the PDF for in another window

SYMPOSIUM 14: RECYCLING AND SUSTAINABLE POLYMERS

The influence of processing on the mechanical properties and emissions of recycled polyolefin

Thomas Höftberger; Christoph Burgstaller

AIP Conf. Proc. 2607, 140001 (2023) https://doi.org/10.1063/5.0136215

Abstract

View articletitled, The influence of processing on the mechanical properties and emissions of recycled polyolefin

Open the PDF for in another window

Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber

Hatice Malatyali; Volker Schöppner; Theresa Hoemann

AIP Conf. Proc. 2607, 140002 (2023) https://doi.org/10.1063/5.0139631

Abstract

View articletitled, Investigation of the influence of process and screw configurations on fiber length for recycled carbon fiber

Open the PDF for in another window

Changing characteristics of microplastics during the aging process of polyethylene film

Marco Schmitt; Michael Gehde

AIP Conf. Proc. 2607, 140003 (2023) https://doi.org/10.1063/5.0135833

Abstract

View articletitled, Changing characteristics of microplastics during the aging process of polyethylene film

Open the PDF for in another window

Model lab-scale devolatilizer for in-line volatile concentration measurements

Lorenzo Lombardi; Navanshu Ahuja; Daniele Tammaro; Ulla Trommsdorff; Pier Luca Maffettone

AIP Conf. Proc. 2607, 140004 (2023) https://doi.org/10.1063/5.0135874

Abstract

View articletitled, Model lab-scale devolatilizer for in-line volatile concentration measurements

Open the PDF for in another window

Effect of dynamic revulcanization in the mechanical properties of blends composed of high-density polyethylene/ground tire rubber devulcanized by microwaves

Fabiula Danielli Bastos de Sousa

AIP Conf. Proc. 2607, 140005 (2023) https://doi.org/10.1063/5.0135945

Abstract

View articletitled, Effect of dynamic revulcanization in the mechanical properties of blends composed of high-density polyethylene/ground tire rubber devulcanized by microwaves

Open the PDF for in another window

Influence of the addition of clays in the rheological properties of dynamically revulcanized blends composed of high-density polyethylene/ground tire rubber devulcanized by microwaves

Fabiula Danielli Bastos de Sousa

AIP Conf. Proc. 2607, 140006 (2023) https://doi.org/10.1063/5.0135946

Abstract

View articletitled, Influence of the addition of clays in the rheological properties of dynamically revulcanized blends composed of high-density polyethylene/ground tire rubber devulcanized by microwaves

Open the PDF for in another window

Quantitative study on the degradation behaviour of biopolyesters during melt processing

Ineke Velghe; Bart Buffel; Frederik Desplentere

AIP Conf. Proc. 2607, 140007 (2023) https://doi.org/10.1063/5.0136368

Abstract

View articletitled, Quantitative study on the degradation behaviour of biopolyesters during melt processing

Open the PDF for in another window

Characterization and identification of microplastics in freshwater systems

Patrick Rankin; Louise Meunier; Marianna Kontopoulou

AIP Conf. Proc. 2607, 140008 (2023) https://doi.org/10.1063/5.0136529

Abstract

View articletitled, Characterization and identification of microplastics in freshwater systems

Open the PDF for in another window

SYMPOSIUM 15: FLEXIBLE ELECTRONICS POLYMERS AND PROCESSES

Synthesis and characterization of PEDOT, an intrinsically conductive polymer

Adèle Karst; Quentin Bailleul; Quentin Weinbach; Damien Favier; Thibault Parpaite; Michel Bouquey; Hervé Pelletier; Cédric Samuel; Jérémie Soulestin

AIP Conf. Proc. 2607, 150001 (2023) https://doi.org/10.1063/5.0135837

Abstract

View articletitled, Synthesis and characterization of PEDOT, an intrinsically conductive polymer

Open the PDF for in another window

SYMPOSIUM 16: HONORARY SYMPOSIUM FOR PROFS CARREAU, KAMAL AND VLACHOPOULOS

How to apply carreaús approach without CFD-Tools

C. Kneidinger

AIP Conf. Proc. 2607, 160001 (2023) https://doi.org/10.1063/5.0136685

Abstract

View articletitled, How to apply carreaús approach without CFD-Tools

Open the PDF for in another window

Sign up for alerts

RSS

Current Issue RSS Feed

Open Issues RSS Feed

Most Read
Most Cited

Preface: 1st International Conference on Sustainable Construction and Environment (SCE) 2022

Design of a 100 MW solar power plant on wetland in Bangladesh

Apu Kowsar, Sumon Chandra Debnath, et al.

The effect of a balanced diet on improving the quality of life in malignant neoplasms

Yu. N. Melikova, A. S. Kuryndina, et al.

Issues

Cover Image

PRELIMINARY

SYMPOSIUM 01: EXTRUSION AND COATING

SYMPOSIUM 02: FILMS AND FIBERS

SYMPOSIUM 03: INJECTION MOLDING AND MICROMOLDING

SYMPOSIUM 04: POLYMER BLENDS AND COMPOUNDS

SYMPOSIUM 05: MODELING AND SIMULATION

SYMPOSIUM 06: POLYMER NANOCOMPOSITES

SYMPOSIUM 07: POLYMER FOAMS

SYMPOSIUM 08: RUBBERS AND ELASTOMERS

SYMPOSIUM 09: THERMOFORMING, BLOW MOLDING AND ROTOMOLDING

SYMPOSIUM 10: REACTIVE PROCESSING

SYMPOSIUM 11: ADDITIVE MANUFACTURING

SYMPOSIUM 12: BIOPOLYMERS AND PROCESSESS/BIOMEDICAL

SYMPOSIUM 14: RECYCLING AND SUSTAINABLE POLYMERS

SYMPOSIUM 15: FLEXIBLE ELECTRONICS POLYMERS AND PROCESSES

SYMPOSIUM 16: HONORARY SYMPOSIUM FOR PROFS CARREAU, KAMAL AND VLACHOPOULOS

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only