Skip Nav Destination
Issues
PRELIMINARY
Preface: International Conference on Engineering Research 2021 (ICER 2021)
AIP Conf. Proc. 2559, 010001 (2022)
https://doi.org/10.1063/12.0011483
FUNDAMENTAL ENGINEERING
The number of members of the double trigonometric series for the stress-strain state of shallow shells assessment
AIP Conf. Proc. 2559, 020001 (2022)
https://doi.org/10.1063/5.0099763
The emergence approach to design decision making in innovative complex engineering systems
AIP Conf. Proc. 2559, 020002 (2022)
https://doi.org/10.1063/5.0099043
Formation of the orbital parameters of promising satellite for earth remote sensing
AIP Conf. Proc. 2559, 020003 (2022)
https://doi.org/10.1063/5.0099225
The research on the development of form and acoustics in a concert hall
AIP Conf. Proc. 2559, 020004 (2022)
https://doi.org/10.1063/5.0099496
Study of ore sulfatizaion process of the Tomtor mining deposit
AIP Conf. Proc. 2559, 020006 (2022)
https://doi.org/10.1063/5.0099059
Hierarchy of methodology for calculating the plain bearing of an internal combustion engine
AIP Conf. Proc. 2559, 020007 (2022)
https://doi.org/10.1063/5.0100353
Analytical and numerical stress state analysis of a shell with tangential developable middle surface
AIP Conf. Proc. 2559, 020008 (2022)
https://doi.org/10.1063/5.0099513
Comparison of two systems of governing equations for the thin shell analysis
AIP Conf. Proc. 2559, 020009 (2022)
https://doi.org/10.1063/5.0099905
HYDRAULIC AND GEOLOGICAL ENGINEERING
3-D simulation of an artificial island at the mouth of the Sochi river
AIP Conf. Proc. 2559, 030001 (2022)
https://doi.org/10.1063/5.0099023
Technological aspects in the development of underground space
AIP Conf. Proc. 2559, 030002 (2022)
https://doi.org/10.1063/5.0099356
Evaluation of the potential water erosion of the Jama river basin for management and control purposes
AIP Conf. Proc. 2559, 030003 (2022)
https://doi.org/10.1063/5.0100219
Study of the erosion of the coastal slope on meandering sections of rivers in the permafrost zone
AIP Conf. Proc. 2559, 030005 (2022)
https://doi.org/10.1063/5.0099165
Residual stresses reduction for 2024 aluminum drill rod in geologic drilling applying cryogenic treatment
AIP Conf. Proc. 2559, 030008 (2022)
https://doi.org/10.1063/5.0105127
Performance of numerical pull-out capacity modeling methods on helical anchors in clay
AIP Conf. Proc. 2559, 030009 (2022)
https://doi.org/10.1063/5.0100067
INFORMATION TECHNOLOGY IN ENGINEERING
Basic concepts of the digital information model in the life cycle of a construction project
AIP Conf. Proc. 2559, 040002 (2022)
https://doi.org/10.1063/5.0099026
BIM implementation of a full life cycle of building
AIP Conf. Proc. 2559, 040006 (2022)
https://doi.org/10.1063/5.0099692
Parameters of the information model of a project at the construction stage
AIP Conf. Proc. 2559, 040007 (2022)
https://doi.org/10.1063/5.0099037
Impact analysis of digital technology on smart city and renewable energy management
AIP Conf. Proc. 2559, 040008 (2022)
https://doi.org/10.1063/5.0099010
Factor systems simulation at all phases of an energy-efficient project life cycle
AIP Conf. Proc. 2559, 040009 (2022)
https://doi.org/10.1063/5.0099693
Neural network technologies for control of subsystems of small spacecraft
AIP Conf. Proc. 2559, 040011 (2022)
https://doi.org/10.1063/5.0099226
Cost analysis of the combined application of 3D-printing and BIM technologies in the construction industry
AIP Conf. Proc. 2559, 040012 (2022)
https://doi.org/10.1063/5.0099012
3D printing technology: A sustainable strategy toward a contemporary earthen building design
AIP Conf. Proc. 2559, 040013 (2022)
https://doi.org/10.1063/5.0099902
CIVIL AND STRUCTURAL ENGINEERING
Method for calculating the strength and deformability of roof sheets made of cement bonded particle board
AIP Conf. Proc. 2559, 050001 (2022)
https://doi.org/10.1063/5.0100259
Selection of the optimum method of the concrete mix initial temperature reduction under hot climate conditions
AIP Conf. Proc. 2559, 050003 (2022)
https://doi.org/10.1063/5.0099117
Experimental study of construction plywood in conditions of flat stress state
AIP Conf. Proc. 2559, 050005 (2022)
https://doi.org/10.1063/5.0099074
Analysis of energy efficiency of building envelopes of JSC "station EGRES-2"
AIP Conf. Proc. 2559, 050006 (2022)
https://doi.org/10.1063/5.0100151
Investigation of longitudinal reinforcement contribution on punching bearing capacity by numerical simulation
AIP Conf. Proc. 2559, 050009 (2022)
https://doi.org/10.1063/5.0100135
Bacteria-Based concrete crack healing: A review of crack healing effecting factors and size
AIP Conf. Proc. 2559, 050010 (2022)
https://doi.org/10.1063/5.0099031
Increasing the thermal uniformity of walls made of cellular concrete blocks
AIP Conf. Proc. 2559, 050011 (2022)
https://doi.org/10.1063/5.0099867
Warping bimoment and its effect on analysis of thin-walled sections
AIP Conf. Proc. 2559, 050012 (2022)
https://doi.org/10.1063/5.0101531
The stress-strain state of the external wall panel with opening of residential building in case bias
AIP Conf. Proc. 2559, 050013 (2022)
https://doi.org/10.1063/5.0099222
Finite element analysis of vertical and horizontal curved beams
AIP Conf. Proc. 2559, 050014 (2022)
https://doi.org/10.1063/5.0099055
Evaluation of the changes in the structure’s dynamic properties on the seismic forces during the vibration process
AIP Conf. Proc. 2559, 050015 (2022)
https://doi.org/10.1063/5.0099028
The design guide for space frames with or without warping restraint at nodes
AIP Conf. Proc. 2559, 050016 (2022)
https://doi.org/10.1063/5.0099013
Experimental study on the effect of chopped basalt fiber on the mechanical properties of high-performance concrete
AIP Conf. Proc. 2559, 050017 (2022)
https://doi.org/10.1063/5.0099042
CONSTRUCTION TECHNOLOGY AND MANAGEMENT
Conditions for achieving sustainability of organizational and process solutions in the facilities construction
AIP Conf. Proc. 2559, 060001 (2022)
https://doi.org/10.1063/5.0099132
Risk-based approach for the organization of construction supervision of the developer
AIP Conf. Proc. 2559, 060003 (2022)
https://doi.org/10.1063/5.0099138
Effectiveness of integrated management of the buildings and structures security system
AIP Conf. Proc. 2559, 060007 (2022)
https://doi.org/10.1063/5.0099022
Organization of material and technical support for the construction of large-panel buildings
AIP Conf. Proc. 2559, 060008 (2022)
https://doi.org/10.1063/5.0099129
Comparison of the tunnel formwork system and traditional formwork system
AIP Conf. Proc. 2559, 060009 (2022)
https://doi.org/10.1063/5.0099058
Technology for gunning gas ducts of heat generating units with combined refractory lining
AIP Conf. Proc. 2559, 060012 (2022)
https://doi.org/10.1063/5.0099431
Analysis and implementation of production processes for adaptive reuse projects
AIP Conf. Proc. 2559, 060014 (2022)
https://doi.org/10.1063/5.0099122
Arrangement of quality control of concrete and reinforced concrete pile foundations
AIP Conf. Proc. 2559, 060017 (2022)
https://doi.org/10.1063/5.0099401
Systematization of the functions of a technical customer when preparing a construction project
AIP Conf. Proc. 2559, 060019 (2022)
https://doi.org/10.1063/5.0099152
Theoretical foundations of managing the stages of the life cycle of capital construction
AIP Conf. Proc. 2559, 060020 (2022)
https://doi.org/10.1063/5.0099100