Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Effect of mechanical treatment of powder on the structure and phase composition of hard alloys
AIP Conf. Proc. 2509, 020004 (2022)
https://doi.org/10.1063/5.0084937
Richardson’s model of tobermorite crystal lattice adapted to hydrated Portland cement crystal lattice
AIP Conf. Proc. 2509, 020005 (2022)
https://doi.org/10.1063/5.0084898
Computer analysis of the stress state of the lithosphere in the Mirny and Aikhal anticlinal fold
AIP Conf. Proc. 2509, 020006 (2022)
https://doi.org/10.1063/5.0084899
Numerical analysis of the stress state of the lithosphere in the Yakutsk-Vilyui large igneous province
AIP Conf. Proc. 2509, 020007 (2022)
https://doi.org/10.1063/5.0084897
Investigation of mechanical response of a two-dimensional tetrachiral structure
AIP Conf. Proc. 2509, 020008 (2022)
https://doi.org/10.1063/5.0084280
Thermal cracking of heavy residues in the presence of catalytic systems modified by polyoxomolybdate compounds
AIP Conf. Proc. 2509, 020009 (2022)
https://doi.org/10.1063/5.0084919
Multifunctional chemical oil-displacing composition: From laboratory to field
AIP Conf. Proc. 2509, 020014 (2022)
https://doi.org/10.1063/5.0084768
Advanced compositions for increasing oil recovery on the principles of “green chemistry”
AIP Conf. Proc. 2509, 020015 (2022)
https://doi.org/10.1063/5.0084773
Combustion synthesis in FeTi+C mechanically activated mixture
AIP Conf. Proc. 2509, 020017 (2022)
https://doi.org/10.1063/5.0084735
Stability of mechanical properties of fixed joints of 35-mm-thick AA5356 sheets produced by the friction stir welding
V. A. Beloborodov; T. A. Kalashnikova; E. A. Kolubaev; V. E. Rubtsov; V. A. Bataev; A. G. Tyurin; A. I. Smirnov; V. A. Bakshaev; I. N. Ivashkin
AIP Conf. Proc. 2509, 020018 (2022)
https://doi.org/10.1063/5.0084423
The nature of a gap in the disordered MWCNT
AIP Conf. Proc. 2509, 020019 (2022)
https://doi.org/10.1063/5.0084288
Computer simulation of magnetic clusters Fen, Con, Nin (n = 2–6) by methods of nonlocal density functional
AIP Conf. Proc. 2509, 020020 (2022)
https://doi.org/10.1063/5.0084390
Computer simulation of semiconductor nanoelectromechanical systems AIIBIVAs2
AIP Conf. Proc. 2509, 020021 (2022)
https://doi.org/10.1063/5.0084394
Structure and mechanical properties of aluminum-lithium alloy 1420 with a weld
AIP Conf. Proc. 2509, 020025 (2022)
https://doi.org/10.1063/5.0084725
Analysis of polyetheretherketone fatigue properties using dynamic modulus and hysteresis loss
AIP Conf. Proc. 2509, 020026 (2022)
https://doi.org/10.1063/5.0084709
Processing and interpretation of rheokinetic dependences of gel-forming compositions
AIP Conf. Proc. 2509, 020027 (2022)
https://doi.org/10.1063/5.0084775
Dynamics of rheological state of polyacrylamide solution during polycondensation
AIP Conf. Proc. 2509, 020028 (2022)
https://doi.org/10.1063/5.0084778
Porous silicon gas permeable membranes
AIP Conf. Proc. 2509, 020029 (2022)
https://doi.org/10.1063/5.0085440
Biopolymeric combined microfiber scaffolds
AIP Conf. Proc. 2509, 020030 (2022)
https://doi.org/10.1063/5.0085032
Tensile properties of carbon fiber reinforced polyetheretherketone composites modified by microfillers
AIP Conf. Proc. 2509, 020032 (2022)
https://doi.org/10.1063/5.0084717
Ultrasonic damage detection in CRFP with stiffeners
AIP Conf. Proc. 2509, 020033 (2022)
https://doi.org/10.1063/5.0084238
Mechanical and tribological properties of antifriction peek-based composites formed by hot pressing and FDM
AIP Conf. Proc. 2509, 020034 (2022)
https://doi.org/10.1063/5.0084757
Synergistic action of mechanisms for increasing the impact toughness of ceramic composites based on ZrO2
AIP Conf. Proc. 2509, 020036 (2022)
https://doi.org/10.1063/5.0084585
Ultrasonic welding assisted formation of PEEK-CF layered composites
AIP Conf. Proc. 2509, 020037 (2022)
https://doi.org/10.1063/5.0084750
Three-level dislocation-oriented model: An application to the description of the Portevin–Le Chatelier effect
AIP Conf. Proc. 2509, 020039 (2022)
https://doi.org/10.1063/5.0084498
Waves behavior on the interface of elastic solids under perfect contact and slip boundary conditions
AIP Conf. Proc. 2509, 020041 (2022)
https://doi.org/10.1063/5.0084388
Changes in the structure of resins of heavy oil from the Usinskoye field during primary processing
AIP Conf. Proc. 2509, 020042 (2022)
https://doi.org/10.1063/5.0084799
Instabilities of friction stir processing of aluminum-magnesium alloy with a square section pin tool
A. V. Chumaevskii; A. N. Ivanov; A. V. Sudarikov; D. V. Indoitu; A. R. Dobrovolsky; D. A. Gurianov; V. A. Beloborodov; P. S. Sokolov
AIP Conf. Proc. 2509, 020046 (2022)
https://doi.org/10.1063/5.0084451
Anisotropy of the aluminum-silicon and aluminum-magnesium alloys properties produced by wire-feed electron beam additive manufacturing
A. V. Chumaevskii; S. Yu. Nikonov; A. V. Gusarova; E. O. Knyazhev; A. O. Panfilov; A. P. Zykova; D. A. Gurianov
AIP Conf. Proc. 2509, 020047 (2022)
https://doi.org/10.1063/5.0084448
Bobbin tool fracture features in AA2024 high thickness friction stir welding
AIP Conf. Proc. 2509, 020048 (2022)
https://doi.org/10.1063/5.0084440
Plastic deformation and fragmentation of single-crystal pure copper during friction stir welding
A. V. Chumaevskii; S. Yu. Tarasov; D. V. Lychagin; E. N. Moskvichev; A. P. Zykova; A. V. Gusarova; D. A. Gurianov; T. A. Kalashnikova
AIP Conf. Proc. 2509, 020049 (2022)
https://doi.org/10.1063/5.0084624
Localized plastic deformation autowaves in FCC alloy with a stable phase structure
AIP Conf. Proc. 2509, 020051 (2022)
https://doi.org/10.1063/5.0084706
Features of the polyaniline morphology on the argon ions irradiated surface of carbon materials
AIP Conf. Proc. 2509, 020052 (2022)
https://doi.org/10.1063/5.0084334
Study of structural cobalt heat resistant alloys with cuboidal morphology
AIP Conf. Proc. 2509, 020053 (2022)
https://doi.org/10.1063/5.0085552
Local deformation behavior of the surface layers of NiTi alloy in instrumented sharp indentation
AIP Conf. Proc. 2509, 020057 (2022)
https://doi.org/10.1063/5.0084711
A procedure for rock failure process analysis at various scales
AIP Conf. Proc. 2509, 020058 (2022)
https://doi.org/10.1063/5.0084824
Cyclic stability in superelasticity window for aged single crystals CoNiAl
AIP Conf. Proc. 2509, 020059 (2022)
https://doi.org/10.1063/5.0084707
Principal component analysis of magnetic steel eddy current testing data
AIP Conf. Proc. 2509, 020060 (2022)
https://doi.org/10.1063/5.0084729
Assessment of oil pollution of Lake Chany (Novosibirsk region)
AIP Conf. Proc. 2509, 020061 (2022)
https://doi.org/10.1063/5.0084933
A review of deformation-induced roughness effects in metals
AIP Conf. Proc. 2509, 020063 (2022)
https://doi.org/10.1063/5.0084720
Development of numerical models describing the mechanical behavior of tissues of the lumbar spine
AIP Conf. Proc. 2509, 020065 (2022)
https://doi.org/10.1063/5.0084313
Development of a numerical 3D model of the knee joint based on the movable cellular automation method
AIP Conf. Proc. 2509, 020066 (2022)
https://doi.org/10.1063/5.0084315
A review of studies of the mechanical behavior of the lumbar spine at total intervertebral discs arthroplasty
AIP Conf. Proc. 2509, 020067 (2022)
https://doi.org/10.1063/5.0084314
Microstructure-based numerical simulation of reversible phase transformations in metal-matrix composites
AIP Conf. Proc. 2509, 020069 (2022)
https://doi.org/10.1063/5.0085033
Features of the structure of impact resistance coating based on Zr-Re-N
AIP Conf. Proc. 2509, 020070 (2022)
https://doi.org/10.1063/5.0084731
Effect of thermo-mechanical treatment on short-term mechanical properties of low-carbon 9% Cr martensitic steel
AIP Conf. Proc. 2509, 020071 (2022)
https://doi.org/10.1063/5.0084325
Modeling of thermo-mechanical treatment for formation of stable particles in a low-carbon 9% Cr martensitic steel
AIP Conf. Proc. 2509, 020072 (2022)
https://doi.org/10.1063/5.0084327
Morphological changes in Harderian glands after the implantation of polycaprolactone films into the cornea
AIP Conf. Proc. 2509, 020073 (2022)
https://doi.org/10.1063/5.0086422
Al-Ti and Al-Ti-Si composites produced by hot compaction of the powder mixtures
AIP Conf. Proc. 2509, 020074 (2022)
https://doi.org/10.1063/5.0084873
Rheological properties of modified gels and cryogels
AIP Conf. Proc. 2509, 020075 (2022)
https://doi.org/10.1063/5.0084782
Study of hydrogeological responses of dual porous collectors to dynamic deformation of rock mass
AIP Conf. Proc. 2509, 020077 (2022)
https://doi.org/10.1063/5.0084437
Mechanical properties and creep of VT22 alloy after radial-shear rolling and subsequent aging
AIP Conf. Proc. 2509, 020078 (2022)
https://doi.org/10.1063/5.0084902
Mechanical effect of pore fluid on the dynamic compressive strength of fluid-saturated brittle materials
AIP Conf. Proc. 2509, 020079 (2022)
https://doi.org/10.1063/5.0084299
Macroscopic elastic properties of two-phase composite materials. Role of interface defects
AIP Conf. Proc. 2509, 020080 (2022)
https://doi.org/10.1063/5.0084382
Physical nature of rails strengthening in extremely long-term operation
AIP Conf. Proc. 2509, 020082 (2022)
https://doi.org/10.1063/5.0084583
Ways of increasing mechanical properties of cantor high entropy alloy
AIP Conf. Proc. 2509, 020083 (2022)
https://doi.org/10.1063/5.0084580
The structure and composition of Al-Si-N/Ni/Al-Si-N three-layer coatings deposited by magnetron sputtering
AIP Conf. Proc. 2509, 020084 (2022)
https://doi.org/10.1063/5.0084705
Influence of post heat treatment on additively manufactured nickel-based superalloy structure
AIP Conf. Proc. 2509, 020085 (2022)
https://doi.org/10.1063/5.0084264
Structure and properties of polyphase ceramic composites (ZrB2-SiC)-BN-CNT
AIP Conf. Proc. 2509, 020086 (2022)
https://doi.org/10.1063/5.0084584
Phase analysis and structural state of AlCoFeCrNi high-entropy alloy of non-equiatomic composition
AIP Conf. Proc. 2509, 020087 (2022)
https://doi.org/10.1063/5.0085244
Borating of steel initiated by a pulsed electron beam
AIP Conf. Proc. 2509, 020090 (2022)
https://doi.org/10.1063/5.0085240
Substrate thickness effect on the electron beam additive manufacturing using titanium alloy wire
AIP Conf. Proc. 2509, 020092 (2022)
https://doi.org/10.1063/5.0084424
Toward the formation of fine primary β-phase grains of titanium alloy during the wire-feed EBAM
AIP Conf. Proc. 2509, 020093 (2022)
https://doi.org/10.1063/5.0084426
EBSD characterization of friction-stir processed 6061-T6 aluminum alloy
AIP Conf. Proc. 2509, 020096 (2022)
https://doi.org/10.1063/5.0084465
Estimation of cyclic fracture toughness of promising 26KhMFA pipe steel in the interval of climatic temperatures
I. S. Kamantsev; A. V. Kuznetsov; E. A. Putilova; S. M. Zadvorkin; I. N. Veselov; I. Yu. Pyshmintsev; I. G. Margamov; E. I. Senaeva
AIP Conf. Proc. 2509, 020097 (2022)
https://doi.org/10.1063/5.0084820
Effect of plasma treatment of porous YSZ on the change in the Zeta potential
AIP Conf. Proc. 2509, 020100 (2022)
https://doi.org/10.1063/5.0084306
Deformation behavior of 3D-Printed Ti-6Al-4V at different strain rates
AIP Conf. Proc. 2509, 020101 (2022)
https://doi.org/10.1063/5.0084875
Structured and phase construction of zinc, strontium and silicon-containing micro-arc calcium phosphate coating
AIP Conf. Proc. 2509, 020102 (2022)
https://doi.org/10.1063/5.0084742
In situ TEM study of microstructure evolution in 3D-printed Ti-6Al-4V samples under uniaxial tension
AIP Conf. Proc. 2509, 020103 (2022)
https://doi.org/10.1063/5.0084876
Structure and phase composition of additive Co-Cr-Mo alloy affected by the duration of mechanical alloying the composite powder
Margarita A. Khimich; Egor A. Ibragimov; Vladimir I. Yakovlev; Alexey I. Tolmachev; Valentina V. Chebodaeva; Pavel V. Uvarkin; Natalia A. Saprykina; Alexander A. Saprykin; Yurii P. Sharkeev
AIP Conf. Proc. 2509, 020104 (2022)
https://doi.org/10.1063/5.0084867
Composite material based on carbon black for the process of oxidative desulfurization of oil
AIP Conf. Proc. 2509, 020105 (2022)
https://doi.org/10.1063/5.0085147
Removal of sulfur-containing compounds from diesel fraction and fuel oil
AIP Conf. Proc. 2509, 020106 (2022)
https://doi.org/10.1063/5.0085148
Effect of temperature on the velocity of ultrasound propagation in stainless steel under process of loading
AIP Conf. Proc. 2509, 020108 (2022)
https://doi.org/10.1063/5.0084928
Deformation behavior of FeNi nanofilms with a gradient grain structure during uniaxial compression
AIP Conf. Proc. 2509, 020111 (2022)
https://doi.org/10.1063/5.0084412
Effect of grain shape on mechanical and structural response of FeNi alloy with grain size gradient under tension
AIP Conf. Proc. 2509, 020112 (2022)
https://doi.org/10.1063/5.0084413
Crystallization of copper nanoparticles upon touching a cold surface. molecular dynamics modeling
AIP Conf. Proc. 2509, 020113 (2022)
https://doi.org/10.1063/5.0084375
Hardness and abrasive wear resistance of TiB-TiC-Ti electron-beam hybrid coatings
AIP Conf. Proc. 2509, 020114 (2022)
https://doi.org/10.1063/5.0084772
Optimization of molding process parameters for carbon fiber/polyether ether ketone laminates
AIP Conf. Proc. 2509, 020115 (2022)
https://doi.org/10.1063/5.0085035
Study of the oil-displacing ability of an acidic chemical oil-displacing composition based on polyol
AIP Conf. Proc. 2509, 020116 (2022)
https://doi.org/10.1063/5.0084787
Analysis of electron microscopic images of multi-walled carbon nanotubes: Determination of the average diameter
AIP Conf. Proc. 2509, 020118 (2022)
https://doi.org/10.1063/5.0085043
Non-catalytic oxidative processing of benzene in plasma reactor at atmospheric pressure
AIP Conf. Proc. 2509, 020119 (2022)
https://doi.org/10.1063/5.0084759
Impurities influence on the diffusion coefficient of oxygen in Ti-Al alloys in theoretical approaches
AIP Conf. Proc. 2509, 020121 (2022)
https://doi.org/10.1063/5.0084871
Analysis of oil-displacing composition components as tracers in a fractured reservoir
AIP Conf. Proc. 2509, 020122 (2022)
https://doi.org/10.1063/5.0084786
Mechanical and tribological properties of three-component high-strength solid-lubricant polyimide based composites
AIP Conf. Proc. 2509, 020124 (2022)
https://doi.org/10.1063/5.0084755
Effect of adhesion on sliding friction force between an elastomer and a cylindrical steel indenter
AIP Conf. Proc. 2509, 020125 (2022)
https://doi.org/10.1063/5.0084270
Surface hardening of austenitic stainless steel via ultrasonic impact-frictional treatment
AIP Conf. Proc. 2509, 020127 (2022)
https://doi.org/10.1063/5.0085657
Simulation of shock-wave effects in metals based on a relaxation model with dislocation kinetics of plastic shears
AIP Conf. Proc. 2509, 020128 (2022)
https://doi.org/10.1063/5.0084589
Study of macroplastic flow in surface layers of porous titanium nickelide by digital image correlation
Ekaterina S. Marchenko; Anatoly A. Klopotov; Artyom M. Ustinov; Yuri A. Abzaev; Anna V. Vetrova; Alexander S. Garin; Gulsharat A. Baigonakova; Marina A. Kovaleva
AIP Conf. Proc. 2509, 020129 (2022)
https://doi.org/10.1063/5.0085185
Effect of inclusion arrangement on strength of dual ceramics composites
AIP Conf. Proc. 2509, 020130 (2022)
https://doi.org/10.1063/5.0085434
Deformation behavior of chicken eggshell
AIP Conf. Proc. 2509, 020131 (2022)
https://doi.org/10.1063/5.0084267
Effect of short-term aging on the low cycle fatigue behavior of advanced 10% Cr steel
AIP Conf. Proc. 2509, 020134 (2022)
https://doi.org/10.1063/5.0084754
In situ ultrasound visualization of processes of micromechanical destruction in the volume of reinforced composites
AIP Conf. Proc. 2509, 020135 (2022)
https://doi.org/10.1063/5.0084502
Fabrication of promising Cu-Al-Ni alloys by electron-beam additive manufacturing
AIP Conf. Proc. 2509, 020136 (2022)
https://doi.org/10.1063/5.0085133
Short-Term creep properties of a 10% Cr–3% co steel on microalloying with rhenium and copper
AIP Conf. Proc. 2509, 020141 (2022)
https://doi.org/10.1063/5.0084328
Phase content, structural and thermodynamic properties of AlMgB14, obtained by SHS using the chemical furnace
AIP Conf. Proc. 2509, 020142 (2022)
https://doi.org/10.1063/5.0084234
Molecular dynamics study of α-Ti behavior under conditions simulating ultrasonic impact treatment
AIP Conf. Proc. 2509, 020143 (2022)
https://doi.org/10.1063/5.0084318
Molecular dynamics modeling of compression-deformed Cu-Al single crystals of different sizes
AIP Conf. Proc. 2509, 020144 (2022)
https://doi.org/10.1063/5.0084324
Selection of the potential for MD-modeling of phase martensitic transformations in Al-Cu-Ni alloy
AIP Conf. Proc. 2509, 020145 (2022)
https://doi.org/10.1063/5.0084322
Evaluation of corrosion resistance of aluminum alloy lifetime under consecutive shock-wave and VHCF fatigue loads
AIP Conf. Proc. 2509, 020146 (2022)
https://doi.org/10.1063/5.0084592
Effect of rolling temperature and thickness reduction on the strength of a 316L steel
AIP Conf. Proc. 2509, 020147 (2022)
https://doi.org/10.1063/5.0084766
Microtexture evolutions in 304L and 316L stainless steels during rolling at 200°C and annealing
AIP Conf. Proc. 2509, 020148 (2022)
https://doi.org/10.1063/5.0084767
Effect of γ - α’ transformation on the strain-hardening coefficient in TRIP-steel
AIP Conf. Proc. 2509, 020149 (2022)
https://doi.org/10.1063/5.0084726
Kinetics of localized plasticity autowaves in polycrystalline aluminum under creep
AIP Conf. Proc. 2509, 020150 (2022)
https://doi.org/10.1063/5.0084730
Structural relaxation features of spark plasma sintered Ni3Al samples
AIP Conf. Proc. 2509, 020151 (2022)
https://doi.org/10.1063/5.0084661
Influence of composition based on deep eutectic solvent on biodestruction of oils of different composition
AIP Conf. Proc. 2509, 020154 (2022)
https://doi.org/10.1063/5.0084751
Hydrogen embrittlement of the additively manufactured Nb-free and Nb-alloyed austenitic steels
Marina Yu. Panchenko; Evgenii V. Melnikov; Sergey V. Astafurov; Valentina A. Moskvina; Kseniya A. Reunova; Galina G. Maier; Andrey V. Chumaevskii; Evgenii A. Kolubaev; Elena G. Astafurova
AIP Conf. Proc. 2509, 020155 (2022)
https://doi.org/10.1063/5.0084703
Effect of advanced thermo-mechanical treatment on microstructure and properties of a low-alloyed copper alloy
AIP Conf. Proc. 2509, 020157 (2022)
https://doi.org/10.1063/5.0084615
Modeling of low-velocity interaction of the tungsten alloy striker with monolithic and spaced barriers
AIP Conf. Proc. 2509, 020159 (2022)
https://doi.org/10.1063/5.0084256
Towards the prognosis of strong acts of seismodynamic destruction of Lake Baikal ice cover
AIP Conf. Proc. 2509, 020161 (2022)
https://doi.org/10.1063/5.0084783
Structure and properties of non-stoichiometric titanium carbide powder after mechanical treatment
AIP Conf. Proc. 2509, 020163 (2022)
https://doi.org/10.1063/5.0085013
Effect of magnetic treatment on corrosion activity and processes of salt deposition in formation waters
AIP Conf. Proc. 2509, 020165 (2022)
https://doi.org/10.1063/5.0085022
Radiolysis of resin-asphalt components of oil under various gases
AIP Conf. Proc. 2509, 020166 (2022)
https://doi.org/10.1063/5.0084579
Modification of ceramic osteoinductive properties using plasma treatment technology
AIP Conf. Proc. 2509, 020167 (2022)
https://doi.org/10.1063/5.0084858
The influence of the layer thickness of solid material on melting process of silicates
AIP Conf. Proc. 2509, 020172 (2022)
https://doi.org/10.1063/5.0084672
Analysis of microparticles formation conditions under uniaxial loading of fragile rock samples
AIP Conf. Proc. 2509, 020173 (2022)
https://doi.org/10.1063/5.0084617
Research of the features of creating a smart layer using 3D printing technology
AIP Conf. Proc. 2509, 020174 (2022)
https://doi.org/10.1063/5.0084252
Structure and mechanical properties of iron-nickel alloy depending on the aging temperature
AIP Conf. Proc. 2509, 020175 (2022)
https://doi.org/10.1063/5.0084722
Influence of the structural factor on the fracture toughness of the ZrB2-SiC-MoS2 composite
AIP Conf. Proc. 2509, 020176 (2022)
https://doi.org/10.1063/5.0084261
Deep eutectic solvents as a basis for chemical oil-displacing compositions
AIP Conf. Proc. 2509, 020177 (2022)
https://doi.org/10.1063/5.0084788
Instrumentation and procedure of determining antioxidants in oil fractions and natural objects
AIP Conf. Proc. 2509, 020178 (2022)
https://doi.org/10.1063/5.0084785
Numerical simulation of friction of aluminum bronze samples obtained by additive deposition method
AIP Conf. Proc. 2509, 020181 (2022)
https://doi.org/10.1063/5.0084381
Numerical 3D macromodel of the mechanical behavior of hip and knee joints of real geometry under acoustic impact
AIP Conf. Proc. 2509, 020182 (2022)
https://doi.org/10.1063/5.0084380
Numerical stress and strain analysis of the steel surface layer burnished with a tilted cylindrical tool
AIP Conf. Proc. 2509, 020183 (2022)
https://doi.org/10.1063/5.0084262
Selectivity and sensitivity nonstoichiometric manganese dioxide doped Cu, Y, and Co
AIP Conf. Proc. 2509, 020184 (2022)
https://doi.org/10.1063/5.0084336
Peculiarities of the tool breakage as a result of a wrong selection of friction stir welding process parameters
AIP Conf. Proc. 2509, 020185 (2022)
https://doi.org/10.1063/5.0084428
Effect of Lithium ions on gas sensing properties of cobalt oxide at room temperature
AIP Conf. Proc. 2509, 020187 (2022)
https://doi.org/10.1063/5.0084337
Estimation of the effective coefficient of viscosity within the quasi-viscous mechanism of mass transfer
AIP Conf. Proc. 2509, 020189 (2022)
https://doi.org/10.1063/5.0084734
The shape memory effect and superelasticity in [001]-oriented NiFeGaCo single crystals in dependence on cobalt concentration
E. E. Timofeeva; E. Yu. Panchenko; A. S. Eftifeeva; A. I. Tagiltsev; N. Yu. Surikov; A. Tokhmetova; E. I. Yanushonite; M. V. Zherdeva; I. Karaman; Yu. I. Chumlyakov
AIP Conf. Proc. 2509, 020191 (2022)
https://doi.org/10.1063/5.0084713
Estimation of bioresorption of a highly filled mineral– polymer composite calcium phosphate–polylactide
AIP Conf. Proc. 2509, 020192 (2022)
https://doi.org/10.1063/5.0085437
The biomedical fibrous materials based on polyhydroxybutyrate and functional additives
AIP Conf. Proc. 2509, 020196 (2022)
https://doi.org/10.1063/5.0084601
Dependence of the strength properties of rocks on the combined effect of low temperature and degree of saturation
AIP Conf. Proc. 2509, 020197 (2022)
https://doi.org/10.1063/5.0087158
Studies of porous granular composite based on glass-clay ceramics
AIP Conf. Proc. 2509, 020202 (2022)
https://doi.org/10.1063/5.0084749
Simulation of shear bands localization in poroelastoplastic solid using spectral element method on GPU
AIP Conf. Proc. 2509, 020203 (2022)
https://doi.org/10.1063/5.0084290
Study of the thermal properties of mixtures of polypropylene with aliphatic polyamide
AIP Conf. Proc. 2509, 020206 (2022)
https://doi.org/10.1063/5.0085480
Numerical analysis of the effective thermal properties and the stability for NTE metamaterials using CAE fidesys
AIP Conf. Proc. 2509, 020210 (2022)
https://doi.org/10.1063/5.0084835
The influence of Bi-layer composite coating microstructure on the strength of the coated material
AIP Conf. Proc. 2509, 020213 (2022)
https://doi.org/10.1063/5.0085018
Structure differences in the planar sections of a 35 mm thick aluminum-magnesium alloy AA5056 FSW-joint
L. L. Zhukov; T. A. Kalashnikova; A. V. Chumaevskii; E. A. Kolubaev; V. E. Rubtsov; V. A. Bataev; A. G. Tyurin; A. I. Smirnov; V. A. Bakshaev; I. N. Ivashkin
AIP Conf. Proc. 2509, 020216 (2022)
https://doi.org/10.1063/5.0084429
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.