Skip Nav Destination
Issues
14 June 2023
XVII INTERNATIONAL SCIENTIFIC-TECHNICAL CONFERENCE “DYNAMICS OF TECHNICAL SYSTEMS” (DTS-2021)
9–11 September 2021
Rostov-on-Don, Russia
-
Cover Image
Cover Image
In this Issue
PRELIMINARY
Preface: XVII International Scientific-Technical Conference ”Dynamics of Technical Systems” (DTS-2021)
AIP Conf. Proc. 2507, 010001 (2023)
https://doi.org/10.1063/12.0012876
FUNDAMENTALS OF MECHANICS, DYNAMICS AND TRIBOLOGY OF MACHINES
Ensuring the accuracy of aircraft parts by the vibration stabilizing treatment method
AIP Conf. Proc. 2507, 020003 (2023)
https://doi.org/10.1063/5.0110346
Technological effect of finishing parts with bone organic media from natural materials
AIP Conf. Proc. 2507, 020004 (2023)
https://doi.org/10.1063/5.0110141
Methods and instruments used for control of operational properties of abrasive tools and materials
AIP Conf. Proc. 2507, 020006 (2023)
https://doi.org/10.1063/5.0110386
Model of slime wastes destruction in rotating electromagnetic field
AIP Conf. Proc. 2507, 020007 (2023)
https://doi.org/10.1063/5.0109356
Thermodynamic foundations of the rational cutting modes choice under conditions of machining
AIP Conf. Proc. 2507, 020008 (2023)
https://doi.org/10.1063/5.0110133
NON-LINEAR DYNAMICS AND APPLIED SYNERGETICS IN TECHNICAL SYSTEMS
Synergetic synthesis of nonlinear robust pneumatic cylinder control laws under parametric uncertainty
AIP Conf. Proc. 2507, 030001 (2023)
https://doi.org/10.1063/5.0110369
The features of the evolution of the dynamic cutting system due to the regenerative effect
AIP Conf. Proc. 2507, 030002 (2023)
https://doi.org/10.1063/5.0109559
Design depth controller for autonomous underwater vehicle using virtual system and diffeomorphism
AIP Conf. Proc. 2507, 030004 (2023)
https://doi.org/10.1063/5.0109850
Synthesis of inverted wedge-balanced stable nonlinear controller based on synergetic control theory
AIP Conf. Proc. 2507, 030005 (2023)
https://doi.org/10.1063/5.0109852
Experimental research of the overhead contact line pylons of electrified transport
AIP Conf. Proc. 2507, 030006 (2023)
https://doi.org/10.1063/5.0109408
Development and application of an automated chicken stomach system
AIP Conf. Proc. 2507, 030008 (2023)
https://doi.org/10.1063/5.0112922
On a type of erosional electric discharge in a flow of a weak water solution
AIP Conf. Proc. 2507, 030009 (2023)
https://doi.org/10.1063/5.0109529
Synergetic synthesis of hierarchical discrete control systems for robotic manipulators
AIP Conf. Proc. 2507, 030010 (2023)
https://doi.org/10.1063/5.0130732
Analysis and display of statistical and spectral characteristics of surface water waves
AIP Conf. Proc. 2507, 030011 (2023)
https://doi.org/10.1063/5.0130659
Mechatronic control module for pneumatic drive of long-stroke coordinate movements
AIP Conf. Proc. 2507, 030013 (2023)
https://doi.org/10.1063/5.0112841
Investigation of the dynamic characteristics of the TDJT-101 point retarder
AIP Conf. Proc. 2507, 030014 (2023)
https://doi.org/10.1063/5.0109532
Influence of the motion parameters of ferromagnetic elements in the processing of liquid viscous substances
AIP Conf. Proc. 2507, 030017 (2023)
https://doi.org/10.1063/5.0114646
ISSUES OF CREATION AND MECHANICS OF HETEROGENEOUS AND COMPOSITE MATERIALS
Micromechanics of small deformations in metal alloys under laser irradiation
AIP Conf. Proc. 2507, 040001 (2023)
https://doi.org/10.1063/5.0109383
The possibilities of using various types of approximations for vertical turbulent exchange parametrization
AIP Conf. Proc. 2507, 040004 (2023)
https://doi.org/10.1063/5.0109352
Inhibition of acid corrosion of steel by nanoscale layers of organic substances
AIP Conf. Proc. 2507, 040005 (2023)
https://doi.org/10.1063/5.0109497
Adhesive resistance of laser-treated steel in contact with non-ferrous alloys
AIP Conf. Proc. 2507, 040007 (2023)
https://doi.org/10.1063/5.0135188
Synthesis of Cu2O nanoparticles and study of their structural and morphological properties
AIP Conf. Proc. 2507, 040008 (2023)
https://doi.org/10.1063/5.0135190
Nanostructural analysis and deoxidizing capacity of silicon alloys of the alkaline earth metals
AIP Conf. Proc. 2507, 040011 (2023)
https://doi.org/10.1063/5.0131519
Microstructure-based numerical estimation of effective elastic properties of porous zirconium carbide
AIP Conf. Proc. 2507, 040012 (2023)
https://doi.org/10.1063/5.0109450
Buckling and free vibration analysis of skew shallow composite panel
AIP Conf. Proc. 2507, 040013 (2023)
https://doi.org/10.1063/5.0109355
FUNDAMENTAL METHODS OF SYSTEM ANALYSIS, MODELING AND OPTIMIZATION OF DYNAMIC SYSTEMS
On the possibility of using graphene–based metamaterials in microwave, sub–THz, THz, infrared and optical filters
AIP Conf. Proc. 2507, 050002 (2023)
https://doi.org/10.1063/5.0109593
Research and analysis of new technologies for drying food products in the heat and mass transfer module
AIP Conf. Proc. 2507, 050004 (2023)
https://doi.org/10.1063/5.0110511
Ultrasonic extraction and determination of flavonoids
AIP Conf. Proc. 2507, 050005 (2023)
https://doi.org/10.1063/5.0110524
Predicting the state of a hydraulic drive basing on the use of a genetic algorithm
AIP Conf. Proc. 2507, 050006 (2023)
https://doi.org/10.1063/5.0135192
Optimization of the service life of electric locomotive equipment based on the analysis of statistical data
AIP Conf. Proc. 2507, 050008 (2023)
https://doi.org/10.1063/5.0109859
System for determining the magnetic characteristics of high-coercive permanent magnets by Bessel functions
AIP Conf. Proc. 2507, 050010 (2023)
https://doi.org/10.1063/5.0109869
Foreign approaches to the systematization of means of individual mobility
AIP Conf. Proc. 2507, 050011 (2023)
https://doi.org/10.1063/5.0109545
Assessment of existing methods for calculating coordination programs for traffic management
AIP Conf. Proc. 2507, 050012 (2023)
https://doi.org/10.1063/5.0109543
Algorithm for the detection of detailed objects in images fixation from UAVs and analysis of its application for the selection of elements of various sizes
Evgenii Semenishchev; Viacheslav Voronin; Nikolay Gapon; Ilya Khamidullin; Olga Tokareva; Alexander Gavlicky; Oxana Balabaeva
AIP Conf. Proc. 2507, 050014 (2023)
https://doi.org/10.1063/5.0114113
Comparison of orthogonal basis functions for image compression
Viacheslav Voronin; Evgenii Semenishchev; Nikolay Gapon; Ilya Khamidullin; Olga Tokareva; Oxana Balabaeva
AIP Conf. Proc. 2507, 050015 (2023)
https://doi.org/10.1063/5.0114112
Java script generator of interactive computer models of classical and relativistic mechanical systems
AIP Conf. Proc. 2507, 050016 (2023)
https://doi.org/10.1063/5.0109778
A model of external environment impact on a group of unmanned aerial vehicles
AIP Conf. Proc. 2507, 050019 (2023)
https://doi.org/10.1063/5.0111187
Numerical solution of eigenvalue problems for the Schrödinger equation
AIP Conf. Proc. 2507, 050020 (2023)
https://doi.org/10.1063/5.0111208
Construction of a phase-locked loop system using holographic photonics
AIP Conf. Proc. 2507, 050021 (2023)
https://doi.org/10.1063/5.0112844
Dynamic configuration of the application menu based on the “top-down” principle
AIP Conf. Proc. 2507, 050022 (2023)
https://doi.org/10.1063/5.0130739
FUNDAMENTAL METHODS OF SYSTEM ANALYSIS, MODELING AND OPTIMIZATION OF DYNAMIC SYSTEMS
The control system of the group pneumatic drive of the revolver head of the machine
AIP Conf. Proc. 2507, 050017 (2023)
https://doi.org/10.1063/5.0112459
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.