Skip Nav Destination
Issues
PRELIMINARY
GENERAL
The effect of casein admixture on the moisture properties of hemp-lime composite
AIP Conf. Proc. 2429, 020002 (2021)
https://doi.org/10.1063/5.0070377
Thermal performance of ceramic hollow brick modified with low emissivity coating
AIP Conf. Proc. 2429, 020003 (2021)
https://doi.org/10.1063/5.0069605
Physical and chemical characteristics of heat resistant materials based on high alumina cement
AIP Conf. Proc. 2429, 020004 (2021)
https://doi.org/10.1063/5.0069565
Thermal performance study of plaster reinforced with Alfa fibers
AIP Conf. Proc. 2429, 020005 (2021)
https://doi.org/10.1063/5.0069628
In-field investigation and comparison of two devices for drying masonry walls
AIP Conf. Proc. 2429, 020006 (2021)
https://doi.org/10.1063/5.0070371
Internal air temperature diversions in summer period in the case of a residential building
AIP Conf. Proc. 2429, 020007 (2021)
https://doi.org/10.1063/5.0069607
Optimization of electrode embedment for self-heating experiments of multifunctional geopolymers
AIP Conf. Proc. 2429, 020008 (2021)
https://doi.org/10.1063/5.0069589
Effect of superabsorbent polymers on hydration heat evolution of cementitious materials
AIP Conf. Proc. 2429, 020009 (2021)
https://doi.org/10.1063/5.0070409
Evaluation of the degree of microbial infection in living quarters by gas chromatography and electronic nose
AIP Conf. Proc. 2429, 020010 (2021)
https://doi.org/10.1063/5.0071531
Influence of metakaolin on pH of cement paste
AIP Conf. Proc. 2429, 020012 (2021)
https://doi.org/10.1063/5.0069758
Effect of storage temperatures on selected wood properties after caffeine treatment
AIP Conf. Proc. 2429, 020013 (2021)
https://doi.org/10.1063/5.0069612
Biodegradation of methylxanthines by Coniophora puteana
AIP Conf. Proc. 2429, 020014 (2021)
https://doi.org/10.1063/5.0069616
Preliminary assessment of CFD models suitable for simulation of processes in tunnel kilns
AIP Conf. Proc. 2429, 020015 (2021)
https://doi.org/10.1063/5.0069673
Influence of biofilms on thermal performance of selected plasters
AIP Conf. Proc. 2429, 020016 (2021)
https://doi.org/10.1063/5.0070230
Properties of CAC paste with varying alumina based admixtures
AIP Conf. Proc. 2429, 020017 (2021)
https://doi.org/10.1063/5.0070338
Moisture content measurements of natural fibrous materials using deep and surface electric methods
AIP Conf. Proc. 2429, 020018 (2021)
https://doi.org/10.1063/5.0070203
Mathematical modeling of local non-equilibrium hydrodynamics in moving liquids
AIP Conf. Proc. 2429, 020019 (2021)
https://doi.org/10.1063/5.0069646
Density-based clustering of E-nose output from mold-contaminated buildings
AIP Conf. Proc. 2429, 020021 (2021)
https://doi.org/10.1063/5.0070164
Results on thermal annealing of graphite enhanced polystyrene insulations
AIP Conf. Proc. 2429, 020022 (2021)
https://doi.org/10.1063/5.0069592
Diffusion coefficient of expanded polystyrene in environments with varying relative humidity
AIP Conf. Proc. 2429, 020025 (2021)
https://doi.org/10.1063/5.0070125
Role of surface effects in the determination of phase change temperature of PCMs
AIP Conf. Proc. 2429, 020026 (2021)
https://doi.org/10.1063/5.0069595
Comparison of different types of electrodes to DC conductivity measurements at elevated temperatures
AIP Conf. Proc. 2429, 020028 (2021)
https://doi.org/10.1063/5.0069610
The role of processing procedures on properties of waste tires recycled products
AIP Conf. Proc. 2429, 020029 (2021)
https://doi.org/10.1063/5.0070242
Thermal expansion and mass change of illite/smectite – waste glass mixtures
AIP Conf. Proc. 2429, 020030 (2021)
https://doi.org/10.1063/5.0070352
Structural and dynamic analysis of the prototype main rotor blade section
AIP Conf. Proc. 2429, 020031 (2021)
https://doi.org/10.1063/5.0070662
Impact of oven drying and sample dimensions on calcite content in cement pastes
AIP Conf. Proc. 2429, 020032 (2021)
https://doi.org/10.1063/5.0069707
Influence of drying methods on composition changes of gypsum paste at early age
AIP Conf. Proc. 2429, 020033 (2021)
https://doi.org/10.1063/5.0069706
Comparative stress analysis of actuator models using smart material alloys
AIP Conf. Proc. 2429, 020034 (2021)
https://doi.org/10.1063/5.0070663
Thermal imaging monitoring of the prototype research installations
AIP Conf. Proc. 2429, 020036 (2021)
https://doi.org/10.1063/5.0070428
Heat-shielding coating for spacecraft based on the directionally crystallized LaB6−NbB2 eutectic alloy
AIP Conf. Proc. 2429, 020038 (2021)
https://doi.org/10.1063/5.0069629
An influence of the firing temperature on elastic constants of alumina porcelain
AIP Conf. Proc. 2429, 020039 (2021)
https://doi.org/10.1063/5.0069597
Differential scanning calorimetry of illite/smectite – CaCO3 mixtures
AIP Conf. Proc. 2429, 020040 (2021)
https://doi.org/10.1063/5.0069599
Impact of precursor granulometry on mechanical properties of geopolymers activated by potassium silicate
AIP Conf. Proc. 2429, 020042 (2021)
https://doi.org/10.1063/5.0069630
Performance study of a cooling system with a series connection of thermoelectric modules
AIP Conf. Proc. 2429, 020044 (2021)
https://doi.org/10.1063/5.0072169
Thermal diffusivity and thermal expansion investigations of titanium grade 5
AIP Conf. Proc. 2429, 020045 (2021)
https://doi.org/10.1063/5.0069644
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.