Skip Nav Destination
Issues
10 December 2021
-
Cover Image
Cover Image
PRELIMINARY
FUNDAMENTAL AND APPLIED PROBLEMS OF CHEMICAL TECHNOLOGY
Bioremediation of fuel oil polluted soil by vermiculture of E. fetida, E. andrei, D. veneta and their probiotics
AIP Conf. Proc. 2412, 020004 (2021)
https://doi.org/10.1063/5.0075858
Motor oil mycobiodestructors in forming microbial consortium for soil bioremediation
AIP Conf. Proc. 2412, 020005 (2021)
https://doi.org/10.1063/5.0075130
Effects of components interaction in the MoO3/Al2O3 catalysts on their catalytic properties in propylene metathesis
AIP Conf. Proc. 2412, 020006 (2021)
https://doi.org/10.1063/5.0075181
Isomerization of alkanes over bifunctional Pt(Pd)/WO3-ZrO2 catalysts
AIP Conf. Proc. 2412, 020011 (2021)
https://doi.org/10.1063/5.0075226
Simple lattice model of potassium cations adsorption from aqueous solution on the basal surface of muscovite
AIP Conf. Proc. 2412, 020012 (2021)
https://doi.org/10.1063/5.0075184
Effect of the support on Pt-Sn-In/Al2O3Catalysts for heptane reforming
AIP Conf. Proc. 2412, 020014 (2021)
https://doi.org/10.1063/5.0075688
CHEMICAL AND OIL AND GAS ENGINEERING
Determination of gas flow characteristics in control ball valves for different stem turn angles
AIP Conf. Proc. 2412, 030002 (2021)
https://doi.org/10.1063/5.0075252
New covering sources for heat load in whole-body cryotherapy units
AIP Conf. Proc. 2412, 030003 (2021)
https://doi.org/10.1063/5.0075049
Experimental stand for research the process of removing moisture from granular carbon black in a drying drum
AIP Conf. Proc. 2412, 030004 (2021)
https://doi.org/10.1063/5.0075064
Diagnostic features of technical condition of gear pumps used in petrochemical industry
AIP Conf. Proc. 2412, 030005 (2021)
https://doi.org/10.1063/5.0075834
Application of synthesis gas compressors in solid organic waste treatment plants
AIP Conf. Proc. 2412, 030007 (2021)
https://doi.org/10.1063/5.0075080
The application of passive techniques of heat transfer enhancement in a vacuum fire-tube boiler
AIP Conf. Proc. 2412, 030008 (2021)
https://doi.org/10.1063/5.0075077
Numerical simulation of the operation of the apparatus for drying granular carbon black
AIP Conf. Proc. 2412, 030010 (2021)
https://doi.org/10.1063/5.0075066
Design and features of the ECC-55 experimental rig for gas-dynamic tests of model centrifugal compressor stages
AIP Conf. Proc. 2412, 030011 (2021)
https://doi.org/10.1063/5.0076213
Experimental study of an air two-stage compressor based on low-speed long-stroke stages
AIP Conf. Proc. 2412, 030014 (2021)
https://doi.org/10.1063/5.0076165
Increasing of energy efficiency of horizontal air cooling apparatus
AIP Conf. Proc. 2412, 030015 (2021)
https://doi.org/10.1063/5.0075074
Energy efficiency evaluation of advanced marine diesel powered reciprocating compressors
AIP Conf. Proc. 2412, 030016 (2021)
https://doi.org/10.1063/5.0076082
Mathematical model of volutes and annular chambers of centrifugal compressor stages
AIP Conf. Proc. 2412, 030020 (2021)
https://doi.org/10.1063/5.0075704
The application practice of the universal modeling method 9th version for industry
AIP Conf. Proc. 2412, 030021 (2021)
https://doi.org/10.1063/5.0075001
The fluid structure interaction simulation of the deformable structural elements and turbulent flow interaction
AIP Conf. Proc. 2412, 030022 (2021)
https://doi.org/10.1063/5.0075069
Selection of technological solutions to reduce LNG loss in supply pipelines to LNG terminal
AIP Conf. Proc. 2412, 030023 (2021)
https://doi.org/10.1063/5.0075642
Algorithm for preventive regulation of the ventilation system
AIP Conf. Proc. 2412, 030028 (2021)
https://doi.org/10.1063/5.0075787
Optimization of the internal structure of a bended sample obtained by FDM-printing from ABS-Plastic
AIP Conf. Proc. 2412, 030031 (2021)
https://doi.org/10.1063/5.0075560
Investigation of interstage channel of hybrid turbomolecular pump
AIP Conf. Proc. 2412, 030032 (2021)
https://doi.org/10.1063/5.0076664
Analysis of the application of the heat loss recovery system for the drive of process equipment
AIP Conf. Proc. 2412, 030033 (2021)
https://doi.org/10.1063/5.0075032
A study of the aerodynamic characteristics in multifunctional active packing layer
AIP Conf. Proc. 2412, 030034 (2021)
https://doi.org/10.1063/5.0075059
Calculation procedure for minimum thicknesses of ball valve bodies
AIP Conf. Proc. 2412, 030035 (2021)
https://doi.org/10.1063/5.0075249
The research of processes in compressed air drying units using composite adsorption materials
AIP Conf. Proc. 2412, 030036 (2021)
https://doi.org/10.1063/5.0075081
Analysis of the results of experimental studies of a centrifugal compressor with an inlet guide vane
AIP Conf. Proc. 2412, 030037 (2021)
https://doi.org/10.1063/5.0075863
Improving the efficiency of heat exchange equipment for process support areas in petrochemical plants
AIP Conf. Proc. 2412, 030038 (2021)
https://doi.org/10.1063/5.0075856
Methods for regulating the performance of screw compressors and features applications for single rotor machines
AIP Conf. Proc. 2412, 030040 (2021)
https://doi.org/10.1063/5.0075107
Application of additive technologies in the development of a vortex valve to control the thrust of a gas-jet drive
AIP Conf. Proc. 2412, 030041 (2021)
https://doi.org/10.1063/5.0075239
Comparison of methods for calculating the efficiency of a regenerative heat exchanger
AIP Conf. Proc. 2412, 030044 (2021)
https://doi.org/10.1063/5.0075445
Influence of the axial force of the rotor of a centrifugal compressor on the operation of the thrust bearing
AIP Conf. Proc. 2412, 030047 (2021)
https://doi.org/10.1063/5.0075797
Thermohydrodynamic parameters of boiling flows of refrigerants in minichannel air coolers
AIP Conf. Proc. 2412, 030048 (2021)
https://doi.org/10.1063/5.0075629
Determination of the medium-speed diesel engine thermal state taking into account the coolant boiling
AIP Conf. Proc. 2412, 030049 (2021)
https://doi.org/10.1063/5.0075071
Determination of the area of the radiation panels of the life- support system
AIP Conf. Proc. 2412, 030050 (2021)
https://doi.org/10.1063/5.0076015
MATERIALS SCIENCE AND CONSTRUCTION MATERIALS
Research of plastics strength properties for 3D printing under normal conditions
AIP Conf. Proc. 2412, 040001 (2021)
https://doi.org/10.1063/5.0076504
Electrophysical properties of MWCNTs ensembles irradiated with various types of charged particles
AIP Conf. Proc. 2412, 040002 (2021)
https://doi.org/10.1063/5.0075037
Formation of channel silicon for integrated membranes
AIP Conf. Proc. 2412, 040003 (2021)
https://doi.org/10.1063/5.0075192
Gas-sensing properties of individual multiwalled carbon nanotubes coated with vanadium oxides
AIP Conf. Proc. 2412, 040006 (2021)
https://doi.org/10.1063/5.0075039
Dielectric properties of a composite material based on epoxy molding material and titanium dioxide
AIP Conf. Proc. 2412, 040008 (2021)
https://doi.org/10.1063/5.0075030
Effect of pimelic acid-based nucleating agents on the structure and properties of isotactic polypropylene
AIP Conf. Proc. 2412, 040009 (2021)
https://doi.org/10.1063/5.0075067
Determination of rational regimes of strengthening processing of steel flange
AIP Conf. Proc. 2412, 040011 (2021)
https://doi.org/10.1063/5.0075356
A study of composite material for temporary repair of technological equipment of oil pipelines
AIP Conf. Proc. 2412, 040012 (2021)
https://doi.org/10.1063/5.0075065
Simulation of the isothermal stamping of cryogenic equipment body parts forgings
AIP Conf. Proc. 2412, 040013 (2021)
https://doi.org/10.1063/5.0074976
Improving the uniformity of distribution of properties over the filtration area of powder filter materials
AIP Conf. Proc. 2412, 040014 (2021)
https://doi.org/10.1063/5.0076232
Studying the pitting corrosion of steel in the conditions of galvanostatic polarization by EIS technique
AIP Conf. Proc. 2412, 040015 (2021)
https://doi.org/10.1063/5.0075092
Synthesis of metal-carbon nanocomposites by mechanical activation of polyvinyl chloride in the presence of Ni(NO3)2
AIP Conf. Proc. 2412, 040017 (2021)
https://doi.org/10.1063/5.0075054
Thermodynamic conditions of the nucleating activity of particles upon modification
AIP Conf. Proc. 2412, 040018 (2021)
https://doi.org/10.1063/5.0075517
SYSTEMS ENGINEERING AND DIGITAL TECHNOLOGIES IN THE OIL AND GAS INDUSTRY
Forecasting the technical condition of pumping equipment using a recurrent neural network
AIP Conf. Proc. 2412, 050001 (2021)
https://doi.org/10.1063/5.0076274
Development of a network stability assessment model for oil and gas industry enterprises
AIP Conf. Proc. 2412, 050002 (2021)
https://doi.org/10.1063/5.0075076
Sensitivity analysis and grouping of rate constants of aspen kinetic model for a fluidized catalytic cracker
AIP Conf. Proc. 2412, 050003 (2021)
https://doi.org/10.1063/5.0076429
System engineering as a basis for forming practices for managing complex digital transformation solutions
AIP Conf. Proc. 2412, 050005 (2021)
https://doi.org/10.1063/5.0076175
MONITORING, DIAGNOSTICS AND AUTOMATION
Petroleum bitumen and polymer-bitumen binders: Current state and Russian specifics. Review
AIP Conf. Proc. 2412, 060001 (2021)
https://doi.org/10.1063/5.0075420
Innovative technologies for dispatch control in transport and hydrocarbon storage facilities
AIP Conf. Proc. 2412, 060003 (2021)
https://doi.org/10.1063/5.0075957
The rationale for limiting the diagnostic parameters of motor oil engine
AIP Conf. Proc. 2412, 060004 (2021)
https://doi.org/10.1063/5.0075714
Introduction of new test methods for catalyst quality improvement
AIP Conf. Proc. 2412, 060005 (2021)
https://doi.org/10.1063/5.0075200
Development and mode setting of the crude emulsion heater reference model used to create a smart control system
AIP Conf. Proc. 2412, 060006 (2021)
https://doi.org/10.1063/5.0075553
Features of electro-drop-jet control of two-coordinate optical flow displacements in laser measuring systems
AIP Conf. Proc. 2412, 060009 (2021)
https://doi.org/10.1063/5.0076183
Calculation of contact stresses in the seating cone of diesel injectors sprayers
AIP Conf. Proc. 2412, 060012 (2021)
https://doi.org/10.1063/5.0075035
Application of PC model to predict liquid penetration into a porous substrate
AIP Conf. Proc. 2412, 060014 (2021)
https://doi.org/10.1063/5.0075139
Application of new materials for detecting toxic components of industrial Emissions
AIP Conf. Proc. 2412, 060015 (2021)
https://doi.org/10.1063/5.0074991
Revisiting the logistics automatization issues of the industrial products based on the chipless printed RFID- tags
AIP Conf. Proc. 2412, 060016 (2021)
https://doi.org/10.1063/5.0075454
Improvement of monitoring system of settlement atmospheric air pollution caused by arbitrary shape emission sources
AIP Conf. Proc. 2412, 060018 (2021)
https://doi.org/10.1063/5.0076563
Evaluation of physical and mechanical properties of heat shrink PVC film
AIP Conf. Proc. 2412, 060019 (2021)
https://doi.org/10.1063/5.0075641
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.