Skip Nav Destination
Issues
7 December 2023
INTERNATIONAL CONFERENCE ON ADVANCES IN MATERIALS, CERAMICS AND ENGINEERING SCIENCES (AMCES-2020): AMCES-2020
17–18 January 2020
Bengaluru, India
-
Cover Image
Cover Image
In this Issue
PRELIMINARY
Preface: International Conference on Advances in Materials, Ceramics and Engineering Sciences (AMCES-2020)
AIP Conf. Proc. 2399, 010001 (2023)
https://doi.org/10.1063/12.0015065
CHEMICAL SCIENCE
Chemical hydrology analysis of groundwater in Huthridurga Hobli, Kunigal Taluk – A case study
AIP Conf. Proc. 2399, 020004 (2023)
https://doi.org/10.1063/5.0132156
Dielectric properties of Cu(1-x)CoxFe2O4 :PbZr0.58Ti0.42O3 layered thick film composites
AIP Conf. Proc. 2399, 020005 (2023)
https://doi.org/10.1063/5.0174983
Behaviour of damage in gel coated natural composite under chemical environment and eccentric loads
AIP Conf. Proc. 2399, 020006 (2023)
https://doi.org/10.1063/5.0131882
Synthesis and characterization of V2O5 thin film by sol-gel technique for anticorrosive applications
AIP Conf. Proc. 2399, 020008 (2023)
https://doi.org/10.1063/5.0132113
Physical and optical properties of Samarium doped sodium lithium phosphate glasses
AIP Conf. Proc. 2399, 020009 (2023)
https://doi.org/10.1063/5.0132017
Improving electric field distribution on corona ring by nano-coating
AIP Conf. Proc. 2399, 020010 (2023)
https://doi.org/10.1063/5.0132316
Development of novel polyaniline/ZnO nanocomposite substrates in the hazardous gas sensors applications
AIP Conf. Proc. 2399, 020011 (2023)
https://doi.org/10.1063/5.0132616
AC conductivity and dielectric properties of polypyrrole/tin oxide nanocomposites
AIP Conf. Proc. 2399, 020012 (2023)
https://doi.org/10.1063/5.0131782
Application of clay catalysts in waste plastic pyrolysis to convert to fuel grade hydrocarbon
AIP Conf. Proc. 2399, 020013 (2023)
https://doi.org/10.1063/5.0131862
Study of decolorisation of mixtures of azo dyes using aluminium oxide nanoparticles synthesized by probe sonication method
K. B. Kusuma; M. Manju; H. P. Nagaswarupa; M. R. Anilkumar; C. R. Ravikumar; M. A. Shilpa Amulya; B. S. Surendra
AIP Conf. Proc. 2399, 020014 (2023)
https://doi.org/10.1063/5.0174936
Synthesis of cupric oxide and its nanocomposite with carbon powder derived from agave plant using probe sonication method for waste water treatment
K. Rudresha; A. Zahir Hussain; C. R. Ravikumar; M. R. Anil Kumar; A. Naveen Kumar; H. C. Ananda Murthy; K. Vinutha
AIP Conf. Proc. 2399, 020015 (2023)
https://doi.org/10.1063/5.0174935
Investigation of the dielectric properties of hybrid composite derived from PANI-CuO nano buds
AIP Conf. Proc. 2399, 020017 (2023)
https://doi.org/10.1063/5.0132547
Evaluating the effect of acidity and conductivity in certain flowering trees barkon and the lichen value diversity
AIP Conf. Proc. 2399, 020018 (2023)
https://doi.org/10.1063/5.0131832
Nanoindentation of solution combustion based nanosized metal oxide nanoparticles and derived polyvinyl alcohol/NaCl/metal oxide nanocomposites
K. S. Prashanth; V. Revathi; S. S. Mahesh; M. B. Nanda Prakash; R. S. Somashekar; B. M. Nagabhushana
AIP Conf. Proc. 2399, 020020 (2023)
https://doi.org/10.1063/5.0132313
Impedance spectroscopic studies of bixbyite and hausmannite crystallites
AIP Conf. Proc. 2399, 020022 (2023)
https://doi.org/10.1063/5.0132079
MECHANICAL SCIENCE
Corrosion inhibition of Al-7075 alloy/SiCp/Gr composites using epoxy-polypyrrole in hydrochloric acid medium
AIP Conf. Proc. 2399, 030003 (2023)
https://doi.org/10.1063/5.0132065
Experimental investigation and non linear finite element analysis of pipe elbow subjected to combined loading
AIP Conf. Proc. 2399, 030004 (2023)
https://doi.org/10.1063/5.0131781
Modal analysis of honeycomb structure for different parametric conditions using finite element method
AIP Conf. Proc. 2399, 030005 (2023)
https://doi.org/10.1063/5.0132658
Review on friction stir welding of Al 6061 MMC using cylindrical tapered and cylindrical taper threaded tool
AIP Conf. Proc. 2399, 030006 (2023)
https://doi.org/10.1063/5.0131889
Finite element modelling and analysis of pre-stressed draft pad of freight wagon
AIP Conf. Proc. 2399, 030007 (2023)
https://doi.org/10.1063/5.0174606
Simulation of droplet generation in microfluidic T-junction device for micro-encapsulation process
AIP Conf. Proc. 2399, 030009 (2023)
https://doi.org/10.1063/5.0132182
Design and optimization of propeller for low-speed aircraft
AIP Conf. Proc. 2399, 030012 (2023)
https://doi.org/10.1063/5.0132090
Gear blank: A case study of failure assessment
G. J. Naveen; B. R. Akash; T. G. Sriganesh; P. Sampath Kumaran; P. Rangasamy; A. Sathyanarayana Swamy; S. Seetharamu
AIP Conf. Proc. 2399, 030013 (2023)
https://doi.org/10.1063/5.0131789
Smart manufacturing through machine learning: A review, perspective and future directions to machining industry
AIP Conf. Proc. 2399, 030014 (2023)
https://doi.org/10.1063/5.0131827
Pretreatment of agricultural wastes to improve biogas production: A review
AIP Conf. Proc. 2399, 030016 (2023)
https://doi.org/10.1063/5.0131924
Tribological characteristics of Al7075-Gr-TiB2 hybrid composites
AIP Conf. Proc. 2399, 030017 (2023)
https://doi.org/10.1063/5.0133376
Short term creep behavior of neem wood veneer epoxy composites
AIP Conf. Proc. 2399, 030018 (2023)
https://doi.org/10.1063/5.0132094
A fault diagnosis of bearing through SVM classifier and data visualization using PCA
AIP Conf. Proc. 2399, 030019 (2023)
https://doi.org/10.1063/5.0131834
Experimental and numerical analysis of woven glass-epoxy composite laminates with single lap joints
AIP Conf. Proc. 2399, 030020 (2023)
https://doi.org/10.1063/5.0157163
Hardness and corrosion behaviour of HVOF sprayed TiB2-SiC composite coatings on A36 stainless steel
AIP Conf. Proc. 2399, 030021 (2023)
https://doi.org/10.1063/5.0157097
The microstructure and microhardness evaluation of cryotreated Al7075-WC MMC
AIP Conf. Proc. 2399, 030022 (2023)
https://doi.org/10.1063/5.0174725
The effects of design modification in a two edge coupled thin composite laminates on SEA
AIP Conf. Proc. 2399, 030024 (2023)
https://doi.org/10.1063/5.0132717
Performance evaluation of automotive plastic fuel tank using finite element analysis
AIP Conf. Proc. 2399, 030025 (2023)
https://doi.org/10.1063/5.0131791
Corrosion behavior of LM4 reinforced zirconium dioxide metal matrix composites
AIP Conf. Proc. 2399, 030027 (2023)
https://doi.org/10.1063/5.0131952
Unbalance response and critical speed analysis of a flexible gas turbine rotor supported with foil bearings
AIP Conf. Proc. 2399, 030028 (2023)
https://doi.org/10.1063/5.0174775
Nanosatellite: A progressive vision of performing passive thermal control
AIP Conf. Proc. 2399, 030030 (2023)
https://doi.org/10.1063/5.0131801
Study of flow around bio-inspired corrugated aerofoil at different angle of attacks in low Reynolds number regime
AIP Conf. Proc. 2399, 030031 (2023)
https://doi.org/10.1063/5.0132442
Mechanical properties of friction stir welding aluminium 6061 MMC using taper threaded tool
AIP Conf. Proc. 2399, 030032 (2023)
https://doi.org/10.1063/5.0131891
Investigations on tribological characteristics of AA7075/E-glass/cenosphere hybrid MMCs
AIP Conf. Proc. 2399, 030033 (2023)
https://doi.org/10.1063/5.0133419
Experimental investigations on dry sliding wear behaviour of hybrid metal matrix composites at elivated temperature
AIP Conf. Proc. 2399, 030034 (2023)
https://doi.org/10.1063/5.0132737
Comparison of parameters of corrosion using gravimetry and EIS technique in aluminum 6065 composites
AIP Conf. Proc. 2399, 030035 (2023)
https://doi.org/10.1063/5.0131857
Production of biodiesel from mustard oil by varying the catalyst concentration
AIP Conf. Proc. 2399, 030036 (2023)
https://doi.org/10.1063/5.0174976
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.