Skip Nav Destination
Issues
PRELIMINARY
BIOMATERIALS
Moisture sorption of cassava starch film incorporated with kaffir lime oil and the prediction models
AIP Conf. Proc. 2332, 020001 (2021)
https://doi.org/10.1063/5.0043716
Potential of banana peels and sugarcane bagasse as lost circulation material additives in drilling mud application
AIP Conf. Proc. 2332, 020002 (2021)
https://doi.org/10.1063/5.0042902
Screening of fruit waste as substrate for microbial fuel cell (MFC)
AIP Conf. Proc. 2332, 020003 (2021)
https://doi.org/10.1063/5.0043556
Effect of contact time on the properties of cellulose, cellulose acetate and its film from various wastes
Salamiah Zakaria; Wahida Abdul Rahman; Nur Syazwani Anuar; Noor Zatus-Shima Mohamad Zain; Khairunnisa Lokman; Nur Nabilah Khairul Anuar; Noor Aishatun Majid; Sharifah Nafisah Syed Ismail
AIP Conf. Proc. 2332, 020005 (2021)
https://doi.org/10.1063/5.0042895
CARBON BASED MATERIAL
Synthesis and characterization of low cost activated carbon from dried rind Garcinia Xanthochymus
AIP Conf. Proc. 2332, 030001 (2021)
https://doi.org/10.1063/5.0042908
Removal of lead (Pb) in soil by eggshells activated carbon
AIP Conf. Proc. 2332, 030003 (2021)
https://doi.org/10.1063/5.0042889
CERAMIC,COMPOSITE AND GLASS
Physical properties of low energy consumption fired industrial waste-clay bricks from cockle shells and soda lime silica glass
Rabiatul Adawiyah Abdul Wahab; Maryam Mohammad; Mazlini Mazlan; Mohammad Aminudin Mohd Razali; Nur Arina Mat Rusni; W. Aisya Nabila W. Sharisun Asma; Faradihah Ashari; Mohd Hafiz Mohd Zaid
AIP Conf. Proc. 2332, 040001 (2021)
https://doi.org/10.1063/5.0042888
The effects of adding Oryza sativa straw ash to ceramic crystalline glaze
AIP Conf. Proc. 2332, 040002 (2021)
https://doi.org/10.1063/5.0042958
Effect of strontium doping on structural and electrical properties of LMTO ceramic
AIP Conf. Proc. 2332, 040003 (2021)
https://doi.org/10.1063/5.0042872
ENGINEERING AND STRUCTURAL MATERIAL
Physical and mechanical properties of fired clay bricks substituted with agricultural waste
Rabiatul Adawiyah Abdul Wahab; Faris Ammar Ahmad Zakri; Nur Khairun Nisa Md Sokri; Nur Adryna Farhana Norizam; Abdul Qayyum Karya; Mohd Hafiz Mohd Zaid; Maryam Mohamad; Mazlini Mazlan
AIP Conf. Proc. 2332, 050001 (2021)
https://doi.org/10.1063/5.0042901
Parallel plate capacitor designed to determine the dry rubber content in natural rubber latex
AIP Conf. Proc. 2332, 050002 (2021)
https://doi.org/10.1063/5.0042886
GRAPHENE
Mechanical, adhesion and corrosive properties of unsaturated polyester-graphene coating treated with silane coupling agent on metal substrate
Siti Nur Farysa SH Samsudin; Zuliahani Ahmad; Adzrie Baharudin; Rozyanty Rahman; Normazlina Abdul Wahab
AIP Conf. Proc. 2332, 060002 (2021)
https://doi.org/10.1063/5.0044097
MATERIALS FOR GREEN TECHNOLOGY AND CATALYSIS
Catalytic reduction of p-nitrophenol on Au/TiO2 powder and Au/TiO2 membrane
AIP Conf. Proc. 2332, 070004 (2021)
https://doi.org/10.1063/5.0043554
Design of homemade photoreactor for dye removal upon irradiation by sunlight
AIP Conf. Proc. 2332, 070005 (2021)
https://doi.org/10.1063/5.0043416
MATERIALS PROCESSING,CHARACTERIZATION AND FORMING
The synthesis and characterization of layered hydroxide salt interleaved with 4-chlorophenoxyacetic acid and its control release study as herbicide
Farah Liyana Bohari; Fardzil Idham Sufian; Sheikh Ahmad Izaddin Sheikh Mohd Ghazali; Nur Nadia Dzulkifli
AIP Conf. Proc. 2332, 080001 (2021)
https://doi.org/10.1063/5.0043290
Dielectric properties and AC conductivity in La0.90Bi0.10MnO3 composite prepared by the solid-state reaction method
Aaliyawani Ezzerin Sinin; Walter Charles Primus; Zainal Abidin Talib; Chen Soo Kien; Abdul Halim Shaari; Sinin Hamdan; Zalita Zainuddin; Siti Hashimah Mohamad Hanif
AIP Conf. Proc. 2332, 080002 (2021)
https://doi.org/10.1063/5.0042878
MATERIALS SCIENCE AND METALLURGY
Effect of cooling rates on contact angle, joint strength and intermetallic of Sn-9Zn solder alloy
AIP Conf. Proc. 2332, 090001 (2021)
https://doi.org/10.1063/5.0043379
POLYMERS
Effect of HNTs and MWCNTs nanotubes on the impact strength and hardness of PMMA denture base
AIP Conf. Proc. 2332, 100001 (2021)
https://doi.org/10.1063/5.0045388
Effect of ethylene carbonate (EC) plasticizer on epoxidized 30% poly(methyl methacrylate)-grafted natural based polymer electrolytes for lithium batteries
Khuzaimah Nazir; Sharifah Nafisah Syed Ismail; Nabilah Akemal Muhd Zailani; Muhd Zu Azhan Yahya; Ab Malik Marwan Ali
AIP Conf. Proc. 2332, 100002 (2021)
https://doi.org/10.1063/5.0043681
The effects of devulcanize microwave radiation time on crosslink density of EPDM waste/natural rubber blend
Nurul Adilah Shahrul Faizal; Dalina Samsudin; Norhidayah Ahmad Jalini; Zuliahani Ahmad; Muhamad Naiman Sarip; Nor Mazlina Abdul Wahab; Mohd Syamaizar Mustafa
AIP Conf. Proc. 2332, 100003 (2021)
https://doi.org/10.1063/5.0042931
Maleated soybean oil based thermoset resin with propylene glycol as monomer in the preparation of low volatile organic compound films
Sharifah Nafisah Syed Ismail; Mithalina Zulaikha Ismail; Salamiah Zakaria; Noor Aishatun Majid; Nor Mazlina Abdul Wahab; Wahida Abdul Rahman
AIP Conf. Proc. 2332, 100004 (2021)
https://doi.org/10.1063/5.0043029
SEMICONDUCTOR MATERIALS
THIN FILMS
Piezoelectric energy harvesting based on ZnO: A review
AIP Conf. Proc. 2332, 120002 (2021)
https://doi.org/10.1063/5.0044476
Effect of various mechanical stretching time on polymorphism of polyvinylidene fluoride (PVDF) thin films
AIP Conf. Proc. 2332, 120004 (2021)
https://doi.org/10.1063/5.0043020