Skip Nav Destination
Issues
PRELIMINARY
KEYNOTE PAPER
Advances in ocean current turbine blade design
AIP Conf. Proc. 2324, 020001 (2021)
https://doi.org/10.1063/5.0037622
Aerodynamics and safety for road trucks in Bangladesh
Firoz Alam; Harun Chowdhury; Anirban Basu; Saifuddin Ahsan; Shaheen Shah; Rashid Sarkar; Akshoy Ranjan Paul; Somnath Chattopadhyaya
AIP Conf. Proc. 2324, 020002 (2021)
https://doi.org/10.1063/5.0037681
MECHANICS AND MATERIALS ENGINEERING
Structural analysis of composite propeller of ship using FEM
AIP Conf. Proc. 2324, 030001 (2021)
https://doi.org/10.1063/5.0037760
Comparison study of different formulation effect on the mechanical behavior of sheet molding compound (SMC)
AIP Conf. Proc. 2324, 030002 (2021)
https://doi.org/10.1063/5.0037458
Effect of aging on the structure and properties of AZ61 Mg alloy with Si addition
AIP Conf. Proc. 2324, 030003 (2021)
https://doi.org/10.1063/5.0037515
Finite element analysis of piezoelectric cantilever beam using vibration for energy harvesting devices
AIP Conf. Proc. 2324, 030004 (2021)
https://doi.org/10.1063/5.0037801
Effects of copper on microstructural modelling and relative changes in AA2024 aluminum alloy
AIP Conf. Proc. 2324, 030005 (2021)
https://doi.org/10.1063/5.0037624
Property analysis of sintered porous aluminum oxide
AIP Conf. Proc. 2324, 030006 (2021)
https://doi.org/10.1063/5.0037605
Effect of stabilizer on sol ageing for CuO thin films synthesized by sol-gel spin coating technique
AIP Conf. Proc. 2324, 030007 (2021)
https://doi.org/10.1063/5.0037501
Experimental investigation of thermo-mechanical properties of copper based marine propeller materials
AIP Conf. Proc. 2324, 030009 (2021)
https://doi.org/10.1063/5.0038082
Improvement of physico-mechanical and thermal properties of jute PP composites by using reactive dye and chemicals
AIP Conf. Proc. 2324, 030012 (2021)
https://doi.org/10.1063/5.0037777
Design and development of jute-cotton reinforced polymer composite for rural poultry housing
AIP Conf. Proc. 2324, 030014 (2021)
https://doi.org/10.1063/5.0037791
Buckling of thin-walled cylindrical shells made of mild steel due to vacuum and its prevention-experimental study
AIP Conf. Proc. 2324, 030016 (2021)
https://doi.org/10.1063/5.0037609
Thermo-mechanical and optical characteristics of cold-rolled copper with natural melting impurities
AIP Conf. Proc. 2324, 030017 (2021)
https://doi.org/10.1063/5.0037516
Atomistic modelling of functionally graded Cu-Ni alloy and its implication on the mechanical properties of nanowires
Md Shajedul Hoque Thakur; Mahmudul Islam; Nur Jahan Monisha; Pritom Bose; Md. Adnan Mahathir Munshi; Turash Haque Pial
AIP Conf. Proc. 2324, 030018 (2021)
https://doi.org/10.1063/5.0037478
Effects of calcium on hot compression behavior of Mg-Al-Zn alloy
AIP Conf. Proc. 2324, 030019 (2021)
https://doi.org/10.1063/5.0037625
Evaluation of mechanical properties of borophene nanotube by molecular dynamics simulation
AIP Conf. Proc. 2324, 030022 (2021)
https://doi.org/10.1063/5.0037898
A numerical comparative study on heat generation pattern for different materials based on eigenfrequencies
AIP Conf. Proc. 2324, 030023 (2021)
https://doi.org/10.1063/5.0037936
Uniaxial and cyclic stress-strain behavior of lead-free solders at nanoscale
AIP Conf. Proc. 2324, 030024 (2021)
https://doi.org/10.1063/5.0037536
Nonlinear finite element analysis of dented pipes under internal pressure and axial loads
AIP Conf. Proc. 2324, 030025 (2021)
https://doi.org/10.1063/5.0038327
Mechanical anisotropy and tension-compression asymmetry of Au coated Si nanowafers: An atomistic approach
AIP Conf. Proc. 2324, 030026 (2021)
https://doi.org/10.1063/5.0038489
Whirling of a Jeffcott rotor on a superelastic SMA shaft
AIP Conf. Proc. 2324, 030027 (2021)
https://doi.org/10.1063/5.0037615
Experimental study on the fabrication and mechanical properties of medium-density particleboards from coconut coir
AIP Conf. Proc. 2324, 030028 (2021)
https://doi.org/10.1063/5.0037564
Self-consistent clustering analysis for modeling of theromelastic heterogeneous materials
AIP Conf. Proc. 2324, 030029 (2021)
https://doi.org/10.1063/5.0038297
FLUIDS ENGINEERING
Three dimensional numerical study of soccer ball aerodynamics at different spin conditions
AIP Conf. Proc. 2324, 040002 (2021)
https://doi.org/10.1063/5.0039685
Comparison of the aerodynamic performance of NACA 4415 and KFm based stepped airfoils
AIP Conf. Proc. 2324, 040003 (2021)
https://doi.org/10.1063/5.0037582
Experimental study on swirling pipe jet
AIP Conf. Proc. 2324, 040005 (2021)
https://doi.org/10.1063/5.0037535
Numerical study of unsteady fluid flow through a tightly coiled rectangular duct of large aspect ratio
AIP Conf. Proc. 2324, 040006 (2021)
https://doi.org/10.1063/5.0037787
Effects of swirling on non-Newtonian fluid flow through arterial stenosis
AIP Conf. Proc. 2324, 040008 (2021)
https://doi.org/10.1063/5.0037687
MHD radiative Carreau-nanofluid stream through a plumb stretching sheet with the influence of binary chemical reaction and Arrhenius activation energy
Md. Shohel Parvez; Sk. Reza-E-Rabbi; Abdullah Al-Mamun; B. M. Jewel Rana; S. M. Arifuzzaman; Md. Shakhaoath Khan
AIP Conf. Proc. 2324, 040009 (2021)
https://doi.org/10.1063/5.0037495
GPU accelerated lattice Boltzmann simulation of non-Newtonian power-law fluid in a porous enclosure
AIP Conf. Proc. 2324, 040011 (2021)
https://doi.org/10.1063/5.0037577
Numerical simulation of flow around surface piercing vertical cylinder
AIP Conf. Proc. 2324, 040012 (2021)
https://doi.org/10.1063/5.0037668
Application of computational fluid dynamics approach for modeling response of offshore pipeline and riser
AIP Conf. Proc. 2324, 040013 (2021)
https://doi.org/10.1063/5.0037890
Direct simulation Monte Carlo analysis of subsonic flow over a rotating circular cylinder in rarefied conditions
AIP Conf. Proc. 2324, 040014 (2021)
https://doi.org/10.1063/5.0037911
HEAT TRANSFER AND THERMAL ENGINEERING
Effect of sample geometry on moisture diffusivity and quality of dried plant-based food materials
AIP Conf. Proc. 2324, 050001 (2021)
https://doi.org/10.1063/5.0037475
An efficient solar-diesel hybrid power generation system for Maheshkhali Island of Bangladesh
AIP Conf. Proc. 2324, 050002 (2021)
https://doi.org/10.1063/5.0037473
Transesterification of vegetable oil with ethanol using different catalysts
AIP Conf. Proc. 2324, 050003 (2021)
https://doi.org/10.1063/5.0037587
Parametric study of two-phase flow in a porous wick of a mechanically pumped loop heat pipe
AIP Conf. Proc. 2324, 050004 (2021)
https://doi.org/10.1063/5.0037715
Convective heat transfer in a square cavity filled with nanofluids under the influence of periodic magnetic field
AIP Conf. Proc. 2324, 050009 (2021)
https://doi.org/10.1063/5.0040474
Ternary or binary blend? A case study using papaya seed oil biodiesel
AIP Conf. Proc. 2324, 050010 (2021)
https://doi.org/10.1063/5.0039519
Free convection flow with Joule heating, heat generation and viscous dissipation along a vertical wavy surface
AIP Conf. Proc. 2324, 050011 (2021)
https://doi.org/10.1063/5.0037584
Electro-thermal behavior of a thin metal line of dissimilar materials under local DC input-output
AIP Conf. Proc. 2324, 050012 (2021)
https://doi.org/10.1063/5.0038321
Non-isothermal flow with convective heat transfer through a curved duct for various aspect ratios
AIP Conf. Proc. 2324, 050014 (2021)
https://doi.org/10.1063/5.0037788
Effect of step size and nanofluid on the performance of stepped solar still
AIP Conf. Proc. 2324, 050018 (2021)
https://doi.org/10.1063/5.0037518
Emission modelling of spark ignition engine using two zone finite heat transfer model
AIP Conf. Proc. 2324, 050019 (2021)
https://doi.org/10.1063/5.0037578
Numerical prediction of unsteady fluid flow and heat transfer through a stationary curved square duct
AIP Conf. Proc. 2324, 050020 (2021)
https://doi.org/10.1063/5.0037783
2D study of the bifurcations in a V-shaped cavity
AIP Conf. Proc. 2324, 050021 (2021)
https://doi.org/10.1063/5.0037667
Entropy analysis due to conjugate natural convection in water-Al2O3 nanofluid filled prismatic cavity
AIP Conf. Proc. 2324, 050022 (2021)
https://doi.org/10.1063/5.0037522
Conjugate pure mixed convection in a differentially heated lid-driven square cavity with two rotating cylinders
AIP Conf. Proc. 2324, 050023 (2021)
https://doi.org/10.1063/5.0037523
Natural convection flow of nanofluids over horizontal circular cylinder with uniform surface heat flux
AIP Conf. Proc. 2324, 050024 (2021)
https://doi.org/10.1063/5.0037580
Investigation on conjugate mixed convection inside a square cavity with heat generating rotating circular cylinder
AIP Conf. Proc. 2324, 050025 (2021)
https://doi.org/10.1063/5.0037524
Regulation of flow using P, PI and PID controllers inside a temperature controlled cold room
AIP Conf. Proc. 2324, 050027 (2021)
https://doi.org/10.1063/5.0037526
Non-Newtonian effect on double diffusive natural convection of nanofluid within a square cavity
AIP Conf. Proc. 2324, 050030 (2021)
https://doi.org/10.1063/5.0037581
Numerical simulation of turbulent heat transfer from wavy plate-fin heat sinks
AIP Conf. Proc. 2324, 050032 (2021)
https://doi.org/10.1063/5.0037537
Mixed convection in a differentially heated cavity with local flow modulation via rotating flat plates
AIP Conf. Proc. 2324, 050034 (2021)
https://doi.org/10.1063/5.0037848
Pure mixed convection inside a vented square cavity with an isothermally heated rotating cylinder
AIP Conf. Proc. 2324, 050035 (2021)
https://doi.org/10.1063/5.0037533
RELATED MECHANICAL ENGINEERING
Application of computational language-based image analysis to investigate intracellular signaling
AIP Conf. Proc. 2324, 060001 (2021)
https://doi.org/10.1063/5.0037566
Laser micromachining of glass substrates for microfluidics devices
AIP Conf. Proc. 2324, 060002 (2021)
https://doi.org/10.1063/5.0037881
Experimental approach to effective power generation from portable speed bump power generation system
AIP Conf. Proc. 2324, 060003 (2021)
https://doi.org/10.1063/5.0037510
Performance analysis of a multi-stage tidal wave energy converter
AIP Conf. Proc. 2324, 060005 (2021)
https://doi.org/10.1063/5.0037490
Fractional recrystallization kinetics in non-heat-treatable aluminium alloys
AIP Conf. Proc. 2324, 060006 (2021)
https://doi.org/10.1063/5.0037948
Temperature and force generation in surgical bone drilling
AIP Conf. Proc. 2324, 060007 (2021)
https://doi.org/10.1063/5.0037543
Molecular dynamics study of prednisolone concentration on cholesterol based lung surfactant monolayer
AIP Conf. Proc. 2324, 060008 (2021)
https://doi.org/10.1063/5.0037471
Energy extraction system for a rickshaw
AIP Conf. Proc. 2324, 060009 (2021)
https://doi.org/10.1063/5.0038616
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.