Skip Nav Destination
Issues
PRELIMINARY
Preface: 3rd International Conference on “Advancements in Aeromechanical Materials for Manufacturing”
AIP Conf. Proc. 2317, 010001 (2021)
https://doi.org/10.1063/12.0003163
MATERIALS SCIENCE
Performance analysis of wire EDM process on aerospace materials
AIP Conf. Proc. 2317, 020001 (2021)
https://doi.org/10.1063/5.0036132
A review on methods of preventing super cooling in phase change materials (PCMs)
AIP Conf. Proc. 2317, 020003 (2021)
https://doi.org/10.1063/5.0036177
Determination x-ray mass attenuation coefficients for NbO2 compound by SR source
AIP Conf. Proc. 2317, 020005 (2021)
https://doi.org/10.1063/5.0036252
Plasmonic nanostructures for enhanced infrared detection in MWIR MCT films
AIP Conf. Proc. 2317, 020006 (2021)
https://doi.org/10.1063/5.0036086
Machining of titanium alloy grade 5 (Ti-6Al-4V) by using PVD coated cutting tool insert
AIP Conf. Proc. 2317, 020008 (2021)
https://doi.org/10.1063/5.0036135
Experimental investigation on mechanical properties of fabricating composite using Kevlar fiber
AIP Conf. Proc. 2317, 020009 (2021)
https://doi.org/10.1063/5.0036266
Fabrication of aluminum metal matrix composite with carbon nanoparticles via stir casting
AIP Conf. Proc. 2317, 020010 (2021)
https://doi.org/10.1063/5.0036311
Investigation of HVOF processed carbide based coating on AISI-4340
AIP Conf. Proc. 2317, 020013 (2021)
https://doi.org/10.1063/5.0036544
Impact of heat treatment on laser beam welded aluminium (A6061)-titanium (Ti6al4v) dissimilar sheet metals
AIP Conf. Proc. 2317, 020014 (2021)
https://doi.org/10.1063/5.0036154
A review on the usage of green composite with other composites
AIP Conf. Proc. 2317, 020015 (2021)
https://doi.org/10.1063/5.0036438
Investigation of flexural properties of fabricated hybrid fibres reinforced composites
AIP Conf. Proc. 2317, 020016 (2021)
https://doi.org/10.1063/5.0036267
Influence on emissions and performance of CI engine with graphene nanoparticles blended with Karanja biodiesel
AIP Conf. Proc. 2317, 020017 (2021)
https://doi.org/10.1063/5.0036142
Experimental investigation on sintering time of Al6061 based nano silica nano composite
AIP Conf. Proc. 2317, 020018 (2021)
https://doi.org/10.1063/5.0036208
System identification of tool chip interface friction while machining CNT-Mg-Al composites
AIP Conf. Proc. 2317, 020019 (2021)
https://doi.org/10.1063/5.0036176
Structure and morphological study of electron beam irradiated polyaniline/LiClO4 composite
AIP Conf. Proc. 2317, 020020 (2021)
https://doi.org/10.1063/5.0036375
Evaluation of tensile, flexural and impact strength of gongura fiber reinforced epoxy composite
AIP Conf. Proc. 2317, 020021 (2021)
https://doi.org/10.1063/5.0036356
Stochastic analysis of natural fiber-reinforced composites
AIP Conf. Proc. 2317, 020022 (2021)
https://doi.org/10.1063/5.0036276
Mechanical properties of epoxy hybrid composites reinforced with agave fiber and zinc powder
AIP Conf. Proc. 2317, 020025 (2021)
https://doi.org/10.1063/5.0036128
Advanced research progresses in aluminium metal matrix composites: An overview
AIP Conf. Proc. 2317, 020026 (2021)
https://doi.org/10.1063/5.0036141
Modeling and finite element analysis of composite propeller blade for aircraft
AIP Conf. Proc. 2317, 020027 (2021)
https://doi.org/10.1063/5.0036318
Design and performance of additively manufactured lightweight bionic hand
AIP Conf. Proc. 2317, 020028 (2021)
https://doi.org/10.1063/5.0036119
Mechanical characterization on delamination effect of carbon epoxy laminate
AIP Conf. Proc. 2317, 020029 (2021)
https://doi.org/10.1063/5.0037267
Fabrication and comparision of AA7005/SiC-Al2O3 and other composite materials using different methods
AIP Conf. Proc. 2317, 020030 (2021)
https://doi.org/10.1063/5.0036139
Optimization of coated CNC tool by micro abrasive blasting and chemical etching
AIP Conf. Proc. 2317, 020031 (2021)
https://doi.org/10.1063/5.0036264
Rapid tooling in investment casting: Investigation on surface finish of mould produced with 3D printed patterns
AIP Conf. Proc. 2317, 020033 (2021)
https://doi.org/10.1063/5.0036171
Recent advancement in slurry erosion test rigs and its parametric influences – A review
AIP Conf. Proc. 2317, 020034 (2021)
https://doi.org/10.1063/5.0036148
Influence of precipitation hardening in aluminum based systems: A literature review
AIP Conf. Proc. 2317, 020035 (2021)
https://doi.org/10.1063/5.0036156
Friction stir spot welding of Al6062/St1020 metals with dissimilar thicknesses
AIP Conf. Proc. 2317, 020036 (2021)
https://doi.org/10.1063/5.0036200
Experimental investigation of fatigue crack propagation behaviour on steel and aluminium
AIP Conf. Proc. 2317, 020039 (2021)
https://doi.org/10.1063/5.0036163
A review on effect of processing parameters on mechanical properties of MMCs by friction stir process
AIP Conf. Proc. 2317, 020040 (2021)
https://doi.org/10.1063/5.0036274
Wetting and corrosion studies on SS304 material surfaces
AIP Conf. Proc. 2317, 020043 (2021)
https://doi.org/10.1063/5.0036435
Smart garbage segregation for the smart city management systems
AIP Conf. Proc. 2317, 020044 (2021)
https://doi.org/10.1063/5.0036617
Material selection and its characterization for Mars environment and a study on full field strain analysis
AIP Conf. Proc. 2317, 020045 (2021)
https://doi.org/10.1063/5.0036265
ENERGY
Design and thermal characteristic analysis of gearbox system based on finite element analysis (FEA)
AIP Conf. Proc. 2317, 030002 (2021)
https://doi.org/10.1063/5.0036235
Shell and tube heat exchanger progression fouling and its mitigation using chemical cleaning process
AIP Conf. Proc. 2317, 030003 (2021)
https://doi.org/10.1063/5.0036112
CFD analysis on various cross sectioned fins to determine the heat transfer rate
AIP Conf. Proc. 2317, 030004 (2021)
https://doi.org/10.1063/5.0036246
Mechanical and machining characterization of Agave Americana, pineapple and its hybrid fiber composites
AIP Conf. Proc. 2317, 030005 (2021)
https://doi.org/10.1063/5.0036545
Experimental analysis of a light weight refrigerated electric vehicle in the summer and winter season
AIP Conf. Proc. 2317, 030006 (2021)
https://doi.org/10.1063/5.0036461
Advance chemical cleaning methodology for plate heat exchanger scaling and fouling removal in place
AIP Conf. Proc. 2317, 030007 (2021)
https://doi.org/10.1063/5.0036109
Numerical investigation of cavitating flows in the step nozzle
AIP Conf. Proc. 2317, 030009 (2021)
https://doi.org/10.1063/5.0036215
Power generation through renewable energies – An idea for application in passenger trains
AIP Conf. Proc. 2317, 030010 (2021)
https://doi.org/10.1063/5.0037303
Transient thermal and CFD analysis of catalytic convertor for emission reduction
AIP Conf. Proc. 2317, 030011 (2021)
https://doi.org/10.1063/5.0036179
Thermal and CFD simulation of steam boiler at different velocities
AIP Conf. Proc. 2317, 030012 (2021)
https://doi.org/10.1063/5.0037282
Heat transfer analysis for two-wheeler engine cooling fins by using CFD
AIP Conf. Proc. 2317, 030015 (2021)
https://doi.org/10.1063/5.0036340
High resolution probe for corrosion monitoring using hyper spectral imaging
AIP Conf. Proc. 2317, 030016 (2021)
https://doi.org/10.1063/5.0036100
Synthesis and characterization of BaMgAl10O17: Eu2+ phosphor for efficient displays
AIP Conf. Proc. 2317, 030017 (2021)
https://doi.org/10.1063/5.0036396
Analytical investigation of fin tube evaporator with different fin geometries by using FEA technique
AIP Conf. Proc. 2317, 030018 (2021)
https://doi.org/10.1063/5.0036195
Experimental studies on micro-channel heat sink with different heat transfer fluid
AIP Conf. Proc. 2317, 030019 (2021)
https://doi.org/10.1063/5.0036125
Grid convergence study on flow past a circular cylinder for beginners
AIP Conf. Proc. 2317, 030020 (2021)
https://doi.org/10.1063/5.0036230
Energy enhancement of air conditioner using R32 and R290 refrigerants
AIP Conf. Proc. 2317, 030021 (2021)
https://doi.org/10.1063/5.0036221
Modeling and CFD simulation of hair pin heat exchanger with different nano fluids
AIP Conf. Proc. 2317, 030022 (2021)
https://doi.org/10.1063/5.0036166
Experimental investigations on elliptical journal bearing using hydrol 68 lubricating oil
AIP Conf. Proc. 2317, 030023 (2021)
https://doi.org/10.1063/5.0036458
CFD simulation of spark ignition engine with natural gas at varying compression ratio
AIP Conf. Proc. 2317, 030024 (2021)
https://doi.org/10.1063/5.0036133
Advances in Laparoscopic surgeries and CFD perspective of suction-irrigation devices
AIP Conf. Proc. 2317, 030025 (2021)
https://doi.org/10.1063/5.0036257
Review of aluminium 6061 metal matrix composites fabricated using stir casting method and applications
AIP Conf. Proc. 2317, 030027 (2021)
https://doi.org/10.1063/5.0036169
Experimental investigation on 4 stroke petrol engine using modified piston
AIP Conf. Proc. 2317, 030028 (2021)
https://doi.org/10.1063/5.0036168
Thermal analysis of shell and tube heat exchangers for improving heat transfer rate using nanofluid mixtures
AIP Conf. Proc. 2317, 030029 (2021)
https://doi.org/10.1063/5.0036470
Investigation of elliptical crack geometry in a thin plate
AIP Conf. Proc. 2317, 030030 (2021)
https://doi.org/10.1063/5.0036433
ENGINEERING
Design and performance evaluation of a vortex tubeform by neam wood
AIP Conf. Proc. 2317, 040001 (2021)
https://doi.org/10.1063/5.0036144
Need of fixture design and its optimization for production based industries
AIP Conf. Proc. 2317, 040002 (2021)
https://doi.org/10.1063/5.0038143
Design and analysis of impeller using corrosion resistant materials
AIP Conf. Proc. 2317, 040003 (2021)
https://doi.org/10.1063/5.0036476
Analysis & comparative study of advance airless tyre with combination of newly designed rim
AIP Conf. Proc. 2317, 040004 (2021)
https://doi.org/10.1063/5.0036233
Design and analysis of brake discs to improve performance in fade condition
AIP Conf. Proc. 2317, 040005 (2021)
https://doi.org/10.1063/5.0036212
Experimental investigation of performance and emission characteristics of diesel engine using pine oil blends
AIP Conf. Proc. 2317, 040006 (2021)
https://doi.org/10.1063/5.0036484
Fluid flow analysis of boiler feed pump by varying number of blades using CFD technique
AIP Conf. Proc. 2317, 040010 (2021)
https://doi.org/10.1063/5.0036451
Characteristic investigation on vetiver fibre reinforced polyethylene composites
AIP Conf. Proc. 2317, 040014 (2021)
https://doi.org/10.1063/5.0036549
Design, analysis and fabrication of effie-cycle: A hybrid tadpole vehicle
AIP Conf. Proc. 2317, 040015 (2021)
https://doi.org/10.1063/5.0036599
GENERAL PHYSICS
Determination of mechanical properties of friction stir welded SS304L and Al 2014 alloys
AIP Conf. Proc. 2317, 050001 (2021)
https://doi.org/10.1063/5.0036185
Evaluation and study of formability characteristics of sheet metals through stretch-bend test
AIP Conf. Proc. 2317, 050002 (2021)
https://doi.org/10.1063/5.0036157
A review of magneto rheological fluid in suspension and torsional devices
AIP Conf. Proc. 2317, 050003 (2021)
https://doi.org/10.1063/5.0036249
Development of height-adjustable attachment for aircraft MRO tripod jacks
AIP Conf. Proc. 2317, 050005 (2021)
https://doi.org/10.1063/5.0036262
Analysis of the modified vacuum drying process in industrial heat exchanger
AIP Conf. Proc. 2317, 050006 (2021)
https://doi.org/10.1063/5.0036116
Numerical and experimental performance estimations of the passenger train with waste collector near Windows
AIP Conf. Proc. 2317, 050007 (2021)
https://doi.org/10.1063/5.0036183
Solar powered tricycle for physically challenged
AIP Conf. Proc. 2317, 050009 (2021)
https://doi.org/10.1063/5.0037269
Effect of process parameters on submerged arc welding: A review
AIP Conf. Proc. 2317, 050011 (2021)
https://doi.org/10.1063/5.0036234
Optimization of turning parameters to control concentricity of globe plug check valve
AIP Conf. Proc. 2317, 050012 (2021)
https://doi.org/10.1063/5.0036278
Electrolytic in-process dressing grinding – A review
AIP Conf. Proc. 2317, 050013 (2021)
https://doi.org/10.1063/5.0036173
Energy efficiency assessment in siltation affected hydroelectric dams
AIP Conf. Proc. 2317, 050015 (2021)
https://doi.org/10.1063/5.0036327
Lean manufacturing for SMEs – A study with reference to SMEs
AIP Conf. Proc. 2317, 050017 (2021)
https://doi.org/10.1063/5.0036131
Experimental investigation of toroidal piston bowl with tangential grooves on CI engine
AIP Conf. Proc. 2317, 050019 (2021)
https://doi.org/10.1063/5.0036269
A review on design and optimization of forced air-cooled cold plate for avionic application
AIP Conf. Proc. 2317, 050020 (2021)
https://doi.org/10.1063/5.0036355
Study of weld bead characteristics and optimization during FCAW of AISI 201LN
AIP Conf. Proc. 2317, 050021 (2021)
https://doi.org/10.1063/5.0036198
Enhancement in mechanical properties of ceramic reinforced aluminum MMC via stir casting methodology: A review
AIP Conf. Proc. 2317, 050022 (2021)
https://doi.org/10.1063/5.0036150
Design and analysis of nimbus long range FPV plane
AIP Conf. Proc. 2317, 050023 (2021)
https://doi.org/10.1063/5.0036204
COMPUTER SCIENCE AND TECHNOLOGY
Paragraph summarization based on word frequency using NLP techniques
AIP Conf. Proc. 2317, 060001 (2021)
https://doi.org/10.1063/5.0037283
Design and implementation of a smart reader for blind and visually impaired people
AIP Conf. Proc. 2317, 060002 (2021)
https://doi.org/10.1063/5.0036140
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.