Skip Nav Destination
Issues
PRELIMINARY
ALTERNATE FUELS
Experimental investigation of single cylinder DI diesel engine by diesel–JFO and its blends
AIP Conf. Proc. 2311, 020001 (2020)
https://doi.org/10.1063/5.0034018
Review on usage of animal waste oil in diesel engine
AIP Conf. Proc. 2311, 020002 (2020)
https://doi.org/10.1063/5.0033969
Investigations on the impact of EGR with a modified combustion chamber for CI diesel engine using biodiesel
AIP Conf. Proc. 2311, 020004 (2020)
https://doi.org/10.1063/5.0034514
Investigation on blending higher alcohol with diesel in a direct injection compression ignition engine
AIP Conf. Proc. 2311, 020005 (2020)
https://doi.org/10.1063/5.0034494
Effect of EGR on performance and emission of CI engine using biodiesel blend of pork lard
AIP Conf. Proc. 2311, 020007 (2020)
https://doi.org/10.1063/5.0034496
Effect of injection pressure on the performance of diesel engine fuelled with pig fat oil biodiesel
Anish Mariadhas; Jayaprabakar Jayaraman; Arunkumar Thirugnanasambandam; Jayaprakash Venugopal; SenthilKumar Jayapalan; Teketi Diwakar; Tuta Naveen
AIP Conf. Proc. 2311, 020009 (2020)
https://doi.org/10.1063/5.0034499
Utilization of waste heat recovery from exhaust gas recirculation (EGR) for NOx reduction
AIP Conf. Proc. 2311, 020012 (2020)
https://doi.org/10.1063/5.0034622
Effect of mixing two biodiesels on emissions in CI engine fuelled by candle nut and soap nut methyl esters-diesel blends
Anderson Arul Gnana Dhas; Antony Casmir; Shaik Sattar; Shaik Mohammed Amjad; Nivin Joy; Karthikeyan Alagu; Annam Renita
AIP Conf. Proc. 2311, 020013 (2020)
https://doi.org/10.1063/5.0034676
Performance and emission characteristics of watermelon seed oil biodiesel blend in a single-cylinder diesel engine
AIP Conf. Proc. 2311, 020017 (2020)
https://doi.org/10.1063/5.0033966
Comparative study of performance and emission characteristics with addition of DEE on orange peel bio-diesel
Kavitha Kutuva Rajaraman; Nivin Joy; Jayaprabakar Jayaraman; Madhubalini; Avuth Spandana; P. Sivashankari; J. Lilly Mercy
AIP Conf. Proc. 2311, 020019 (2020)
https://doi.org/10.1063/5.0034491
Emission and performance analysis of thermochemical conversion of bio-oil using waste animal fat
Hemanandh Janarthanam; Sridhar Raja Sundara Raju Kachupalli; Senthil Kumar Jayapalan; Ganesan Subbiah; Purusothaman Mani; M. Velkumar; S. Siva Adithya
AIP Conf. Proc. 2311, 020020 (2020)
https://doi.org/10.1063/5.0034174
Performance and emission analysis of stoechospermum marginatum algae biodiesel using cerium oxide as additives
Kumarasubramanian Ramar; Karthikeyan Paramasivam; Yuvaraja Subramani; Kanimozhi Balakrishnan; P. Sandeep Reddy; P. Sai Krishna
AIP Conf. Proc. 2311, 020024 (2020)
https://doi.org/10.1063/5.0034397
Performance and emission characteristics of diesel engine using waste plastic oil with N-hexanol as an additive
AIP Conf. Proc. 2311, 020025 (2020)
https://doi.org/10.1063/5.0034393
Reduction of NOx emissions with low viscous biofuel using exhaust gas recirculation technique
AIP Conf. Proc. 2311, 020026 (2020)
https://doi.org/10.1063/5.0034424
Experimental investigation of unmodified diesel engine using hybrid biofuel: Pine oil-Jatropha biodiesel blends
AIP Conf. Proc. 2311, 020027 (2020)
https://doi.org/10.1063/5.0034247
Experimental investigation on the production of linseed biodiesel yielding and properties evaluation
AIP Conf. Proc. 2311, 020028 (2020)
https://doi.org/10.1063/5.0034924
Emission examination in diesel engine by using biodiesel fuel with electrochemical activated cell catalytic converter
Senthilkumar Jayapalan; B. R. Ramesh Bapu; Syed Khalid P.; M. Sharuhan; Jayaprakash Venugopal; Anish Mariadhas; Sridhar Raja Sundara Raju Kachupalli
AIP Conf. Proc. 2311, 020029 (2020)
https://doi.org/10.1063/5.0034637
Effect of nano additives in engine performance and emission characteristics using biodiesel fuel
Ganesan Subbiah; Hemanandh Janarthanam; Purushothaman Mani; K. S. Sridhar Raja; R. Periya Sakthivel; S. Sakthivignesh; K. S. Sreenivasan
AIP Conf. Proc. 2311, 020030 (2020)
https://doi.org/10.1063/5.0034008
Multi-objective optimization of VCR diesel engine performance and emissions fueled with diesel-lime steam oil blends using grey relational analysis
Ganesan Subbiah; R. Sathish Kumar; Devaraj Rangabashiam; Hemanandh Janarathanam; Venkatesan Sorakka Ponnappan; Beemkumar Nagappan; K. S. Sreenivasan
AIP Conf. Proc. 2311, 020034 (2020)
https://doi.org/10.1063/5.0034017
Detailed study on the influence of silicon oxide on emission characteristics of VCR diesel engine with blends of camelina biodiesel
Ganesan Subbiah; Venkatesan Sorakka Ponnappan; Hemanandh Janarthanam; Devaraj Rangabashiam; K. S. Sridhar Raja; Vikash Reddy; R. Sathish Kumar
AIP Conf. Proc. 2311, 020035 (2020)
https://doi.org/10.1063/5.0034020
Performance, emission and combustion characteristics of the diesel engine powered by the nano emulsion of the lemon peel oil biodiesel
Kumarasubramanian Ramar; Yuvaraja Subramani; Karthikeyan Paramasivam; Jayaprabakar Jayaraman; P. Krishnakanth; K. Akhil Yadav
AIP Conf. Proc. 2311, 020037 (2020)
https://doi.org/10.1063/5.0034408
Impact of nano additives in DI diesel engine to investigate performance and emission characteristics by using biodiesel blended with diesel
Senthilkumar Jayapalan; B. R. Ramesh Bapu; S. Dharani Kumar; S. M. Kanishkar; Jayaprakash Venugopal; Anish Mariadhas; Ganesan Subbiah
AIP Conf. Proc. 2311, 020039 (2020)
https://doi.org/10.1063/5.0034641
Investigation on performance and emission characteristics of tetra hydro curcumin biodiesel blends in single cylinder diesel engine
Jayaprakash Venugopal; R. B. Durairaj; Anish Mariadhas; Senthilkumar Jayapalan; G. Eniyavan; P. Yuvaraaj
AIP Conf. Proc. 2311, 020041 (2020)
https://doi.org/10.1063/5.0034603
Experimental investigation on emission reduction in diesel engine by using biodiesel with catalytic converter
Senthilkumar Jayapalan; B. R. Ramesh Bapu; Kalaiyarasan; P. Hemanthkumar; Jayaprakash Venugopal; Anish Mariadhas; S. Sivasaravanan
AIP Conf. Proc. 2311, 020042 (2020)
https://doi.org/10.1063/5.0034645
Emission characteristics of nano additive-biodiesel blends in diesel engine
AIP Conf. Proc. 2311, 020044 (2020)
https://doi.org/10.1063/5.0034064
Emission study for pentanol and pongamia biodiesel blends in a DI diesel engine
AIP Conf. Proc. 2311, 020046 (2020)
https://doi.org/10.1063/5.0034067
AERONAUTICAL
Numerical and experimental analysis of a small horizontal axis wind turbine rotors
AIP Conf. Proc. 2311, 030002 (2020)
https://doi.org/10.1063/5.0034317
Optimizations of small horizontal-axis wind turbine rotors at low Reynolds number
AIP Conf. Proc. 2311, 030003 (2020)
https://doi.org/10.1063/5.0034319
Experimental and numerical study on foam core sandwich panels with different projectile shapes
AIP Conf. Proc. 2311, 030004 (2020)
https://doi.org/10.1063/5.0034286
Investigation of jet impingement characteristics on primary flow of a convergent nozzle using square tab patterns
Venkatesh Subramanian; Venkatesan Sorakka Ponnappan; Rakesh Vimal Maria; P. Gunasekar; P. Holy Sophia; K. Priyadarshini
AIP Conf. Proc. 2311, 030008 (2020)
https://doi.org/10.1063/5.0034675
Investigation of an aero-aquatic vehicle through bionics
AIP Conf. Proc. 2311, 030011 (2020)
https://doi.org/10.1063/5.0034616
Aerodynamic design, analysis, fabrication and testing of a claw yaw sphere for subsonic flow
AIP Conf. Proc. 2311, 030012 (2020)
https://doi.org/10.1063/5.0034215
Projectile impact behaviour on various Kevlar composites
AIP Conf. Proc. 2311, 030014 (2020)
https://doi.org/10.1063/5.0034302
Analysis, fabrication and testing of a sandwich composite for an UAV wing
AIP Conf. Proc. 2311, 030015 (2020)
https://doi.org/10.1063/5.0033993
Aerodynamic design and computational analysis of yaw sphere for subsonic wind tunnel
AIP Conf. Proc. 2311, 030016 (2020)
https://doi.org/10.1063/5.0034197
Experimental investigation on electromagnetic launcher technique
AIP Conf. Proc. 2311, 030017 (2020)
https://doi.org/10.1063/5.0034412
Optimization of ejector design using CFD analysis
AIP Conf. Proc. 2311, 030018 (2020)
https://doi.org/10.1063/5.0034392
Preliminary studies on jet flows from flat vane swirler: Effect of twist angle
AIP Conf. Proc. 2311, 030019 (2020)
https://doi.org/10.1063/5.0034706
Preliminary studies on jet flow from non-uniform straight vane swirler: Effect of vane orientation
AIP Conf. Proc. 2311, 030020 (2020)
https://doi.org/10.1063/5.0034710
Feasibility study of ion generator for flow control
AIP Conf. Proc. 2311, 030021 (2020)
https://doi.org/10.1063/5.0034721
Elemental effects of aspect ratio of buildings due to wind driven rain using open FOAM®
AIP Conf. Proc. 2311, 030022 (2020)
https://doi.org/10.1063/5.0034732
Design and development of a low-cost visualization setup for compressible flows
AIP Conf. Proc. 2311, 030023 (2020)
https://doi.org/10.1063/5.0034713
Preliminary studies on jet flow from curved vane swirl: Effect of radius of curvature
AIP Conf. Proc. 2311, 030024 (2020)
https://doi.org/10.1063/5.0034712
Numerical aerodynamic study of a typical high-rise building
AIP Conf. Proc. 2311, 030025 (2020)
https://doi.org/10.1063/5.0034725
Visualization of shock structures in converging nozzles with novel chevron configurations
AIP Conf. Proc. 2311, 030027 (2020)
https://doi.org/10.1063/5.0034730
Some studies on aerodynamics of tuk-tuk vehicle
AIP Conf. Proc. 2311, 030029 (2020)
https://doi.org/10.1063/5.0034716
Environmental pollution control using artificial intelligence drone
AIP Conf. Proc. 2311, 030031 (2020)
https://doi.org/10.1063/5.0034004
Systematic survey and truth flow analysis of wind tunnel in South India
AIP Conf. Proc. 2311, 030033 (2020)
https://doi.org/10.1063/5.0035436
Numerical study of effects on vortex shedding patterns due to unsteady freestream around cylinder
AIP Conf. Proc. 2311, 030035 (2020)
https://doi.org/10.1063/5.0034724
Visualization of flow control using ion wind on impinging jet
AIP Conf. Proc. 2311, 030036 (2020)
https://doi.org/10.1063/5.0034722
AUTOMOBILE
Design and analysis of impact damper to reduce direct impact on automobiles
AIP Conf. Proc. 2311, 040001 (2020)
https://doi.org/10.1063/5.0034294
Replacement of brake master cylinder spring by compliant mechanism – A topology optimization approach
AIP Conf. Proc. 2311, 040002 (2020)
https://doi.org/10.1063/5.0034593
Performance analysis of compact heat exchanger for effective utilization of waste heat from diesel engine exhaust and optimization with CFD
Karthikeyan Paramasivam; Yuvaraja Subramani; Kanimozhi Balakrishnan; Kumarasubramanian Ramar; M. Veerendra Gowrav; M. Sriram Kumar
AIP Conf. Proc. 2311, 040004 (2020)
https://doi.org/10.1063/5.0034519
Design, analysis and fabrication of EV with level-1 autonomous vehicle capability
AIP Conf. Proc. 2311, 040006 (2020)
https://doi.org/10.1063/5.0033975
Emission control and reduction in fuel consumption of two-stroke Si engine using nano-fragment as a catalyst
AIP Conf. Proc. 2311, 040007 (2020)
https://doi.org/10.1063/5.0034321
Evaluating wear characteristics of self-lubricating composition for spools used in pneumatic valves
AIP Conf. Proc. 2311, 040008 (2020)
https://doi.org/10.1063/5.0034361
Compressive strength and energy absorption of magnesium foam with REE by powder metallurgy process
AIP Conf. Proc. 2311, 040009 (2020)
https://doi.org/10.1063/5.0034356
Corrosion behaviour of closed cell magnesium foam with rare earth elements by powder metallurgy process
AIP Conf. Proc. 2311, 040010 (2020)
https://doi.org/10.1063/5.0034354
Optimum design of catalytic converter to reduce carbon monoxide emissions on diesel engine
AIP Conf. Proc. 2311, 040011 (2020)
https://doi.org/10.1063/5.0034427
Effect of door opening on flow and drag characteristics of a model SUV
AIP Conf. Proc. 2311, 040013 (2020)
https://doi.org/10.1063/5.0034717
Modification of an auto-rickshaw for drag reduction using numerical simulation
AIP Conf. Proc. 2311, 040014 (2020)
https://doi.org/10.1063/5.0034718
Methodical study of micro air vehicle/UAV device and its mechanism
AIP Conf. Proc. 2311, 040017 (2020)
https://doi.org/10.1063/5.0035439
Experimental and analysis of exhaust muffler using fast fourier transformation
AIP Conf. Proc. 2311, 040018 (2020)
https://doi.org/10.1063/5.0034012
Latest trends in automotive muffler – A review
Bupesh Raja Venkatagiri; S. Krishna Raj; Sundar Kasyap; V. Ganesh Kumar; J. Baalamurugan; Mathew Alphonse
AIP Conf. Proc. 2311, 040019 (2020)
https://doi.org/10.1063/5.0034562
DESIGN
Design of automated vertical storage system for automotive applications
AIP Conf. Proc. 2311, 050001 (2020)
https://doi.org/10.1063/5.0034330
Design and fabrication of smart rover using rocker bogie mechanism
AIP Conf. Proc. 2311, 050003 (2020)
https://doi.org/10.1063/5.0034190
Design and development of automatic sheet metal cutting machine
AIP Conf. Proc. 2311, 050005 (2020)
https://doi.org/10.1063/5.0034349
Design and fabrication of dehydrator for vegetables and fruits
AIP Conf. Proc. 2311, 050006 (2020)
https://doi.org/10.1063/5.0034133
Design, development and fabrication of multipurpose agricultural machine
AIP Conf. Proc. 2311, 050007 (2020)
https://doi.org/10.1063/5.0034379
Development of landmine detection robot
Lakshmi Sankar Subramanian; B. Lakshmi Sharath; Aman Dinodiya; Gaurav Kumar Mishra; G. Senthil Kumar; Jeya Jeevahan
AIP Conf. Proc. 2311, 050008 (2020)
https://doi.org/10.1063/5.0034333
Design and fabrication of aqua silencer
AIP Conf. Proc. 2311, 050009 (2020)
https://doi.org/10.1063/5.0034104
Simulation of converging-diverging (CD) ejector nozzle and its performance analysis
AIP Conf. Proc. 2311, 050012 (2020)
https://doi.org/10.1063/5.0034541
Polymer composite solar collector for water heating application
AIP Conf. Proc. 2311, 050015 (2020)
https://doi.org/10.1063/5.0034418
Machine learning techniques for fault detection of induction motor bearings
AIP Conf. Proc. 2311, 050017 (2020)
https://doi.org/10.1063/5.0034204
Design and development of helmet to enhance human comfort and safety using FEA
AIP Conf. Proc. 2311, 050018 (2020)
https://doi.org/10.1063/5.0034305
Numerical design and modelling of a vertical axis wind turbine to extract wind energy from highways to power electric vehicle charging stations
K. R. Vishwaretha; Sanjay Majjigesara Venkatesh; W. Clavin Sequeira; T. D. Teeshma; T. B. Vishalakshi
AIP Conf. Proc. 2311, 050019 (2020)
https://doi.org/10.1063/5.0033976
Design and development of a novel flying car for future transportation
AIP Conf. Proc. 2311, 050020 (2020)
https://doi.org/10.1063/5.0034457
Fuzzy logic controller based UPFC for voltage profile improvement in a smart grid
AIP Conf. Proc. 2311, 050021 (2020)
https://doi.org/10.1063/5.0034632
Implementation of a novel incinerator plant for potential heat recovery from biomass
AIP Conf. Proc. 2311, 050022 (2020)
https://doi.org/10.1063/5.0034438
MECHATRONICS
Gesture control of UAV using radio frequency
AIP Conf. Proc. 2311, 060003 (2020)
https://doi.org/10.1063/5.0034002
MANUFACTURING
A lot streaming based flow shop scheduling using particle swarm optimization
AIP Conf. Proc. 2311, 070001 (2020)
https://doi.org/10.1063/5.0034474
FEA and micro structural investigation of autogenous GTAW and laser beam weld IRSM 41 - 97 steel joints
AIP Conf. Proc. 2311, 070002 (2020)
https://doi.org/10.1063/5.0034615
Experimental investigation on mechanical erosion and permeation behavior of plasma nitriding over manet steel
AIP Conf. Proc. 2311, 070004 (2020)
https://doi.org/10.1063/5.0034626
Experimental investigation on copper metal powder for substrate steel
AIP Conf. Proc. 2311, 070005 (2020)
https://doi.org/10.1063/5.0034383
Bearing fault diagnosis using fuzzy unordered rule induction algorithm through vibration signals
AIP Conf. Proc. 2311, 070006 (2020)
https://doi.org/10.1063/5.0033988
Sustainability analysis on polymers using life cycle assessment tool (OPENLCA)
AIP Conf. Proc. 2311, 070007 (2020)
https://doi.org/10.1063/5.0034820
Study the microstructural joints of AA2024 and AA7075 alloy by friction stir welding
AIP Conf. Proc. 2311, 070010 (2020)
https://doi.org/10.1063/5.0034380
Stress ratio effects on fatigue behavior of GFRP woven composite laminates
AIP Conf. Proc. 2311, 070012 (2020)
https://doi.org/10.1063/5.0034100
Development of novel tricoated CuNiCr filler for welding weathering steel
AIP Conf. Proc. 2311, 070013 (2020)
https://doi.org/10.1063/5.0034619
Development of tri-sandwich Cu-Ni-Cr coating over weathering steel used for construction applications
AIP Conf. Proc. 2311, 070014 (2020)
https://doi.org/10.1063/5.0034621
Optimization of process parameter of brass butt joint using brazing process
AIP Conf. Proc. 2311, 070016 (2020)
https://doi.org/10.1063/5.0034395
Experimental evaluation of the mechanical properties of friction stir weld of brass
AIP Conf. Proc. 2311, 070018 (2020)
https://doi.org/10.1063/5.0034440
Study of riveting process using FEA - A case study
Bupesh Raja Venkatagiri; S. Sivasaravanan; G. Shakthi Sankaran; A. Abhishek; Mathew Alphonse; Ajay Shivsharan Reddy
AIP Conf. Proc. 2311, 070020 (2020)
https://doi.org/10.1063/5.0034564
Raman spectroscopic analysis of plasma nitrided EN353 steel
AIP Conf. Proc. 2311, 070022 (2020)
https://doi.org/10.1063/5.0034416
Workers to super workers: A brief discussion on important technologies for industry 5.0 manufacturing systems
AIP Conf. Proc. 2311, 070025 (2020)
https://doi.org/10.1063/5.0034521
Investigation of PEEK skinned with aramid fiber
AIP Conf. Proc. 2311, 070027 (2020)
https://doi.org/10.1063/5.0034442
Modelling and analysis of process parameters in drilling of Ti-6Al-4V using response surface methodology (RSM)
AIP Conf. Proc. 2311, 070028 (2020)
https://doi.org/10.1063/5.0034446
Study of mechanical and surface properties of aluminium MMC reinfroced with boron carbide
AIP Conf. Proc. 2311, 070029 (2020)
https://doi.org/10.1063/5.0034447
A review on tribological behavior of polymer composite impregnated with carbon fillers
AIP Conf. Proc. 2311, 070030 (2020)
https://doi.org/10.1063/5.0035408
MATERIALS
Mechanical and corrosion behaviour of Gd2Zr2O7 – HAp and Sm2Zr2O7 – HAp composite coated Ti-6Al-4V alloy for biomedical applications
Gobi Saravanan Kaliaraj; Anderson Arul Gnana Dhas; Karthik Alagarsamy; A. M. Kamalan Kirubaharan; Shaik Sarwath Hussain; K. Sasitharan
AIP Conf. Proc. 2311, 080001 (2020)
https://doi.org/10.1063/5.0034653
Wear and corrosion studies on vanadium pentoxide coated on magnesium alloy (AZ-31B) using dip coating process
Sridhar Raja Sundara Raju Kachupalli; Maddula Vamsi Prasanth; Kanakala Narasimha Murthy; Ganesan Subbaih; Hemanandh Janarthanam; Senthil Kumar Jayapalan; M. Sangeetha
AIP Conf. Proc. 2311, 080002 (2020)
https://doi.org/10.1063/5.0034015
Wear optimization of graphene reinforced magnesium AZ31 composite using Taguchi design
Sridhar Raja Sundara Raju Kachupalli; V. Kishorekumar; E. Mathan; Ganesan Subbiah; Hemanandh Janarthanam; Senthil Kumar Jayapalan; M. Sangeetha
AIP Conf. Proc. 2311, 080005 (2020)
https://doi.org/10.1063/5.0034025
Study of aluminium metal matrix composite material characteristics for potential use in disc brake rotor
AIP Conf. Proc. 2311, 080006 (2020)
https://doi.org/10.1063/5.0034540
Computational analysis on hybrid composite material
Sanjana Damodar Tulaskar; Syed Shoeab Wazeer; Poornachandra S. Goudar; Abdul Rehaman Patel; Akhila Rupesh
AIP Conf. Proc. 2311, 080007 (2020)
https://doi.org/10.1063/5.0034009
Microstructure and corrosion behaviour of Ni-Ag and Ni-Cu composite coating for industrial applications
AIP Conf. Proc. 2311, 080009 (2020)
https://doi.org/10.1063/5.0034166
Biocompatible silver incorporated hydroxyapatite; synthesis, characteristics for biomedical application
AIP Conf. Proc. 2311, 080010 (2020)
https://doi.org/10.1063/5.0034470
Prediction of tensile strength in fused deposition modeling process using artificial neural network technique
AIP Conf. Proc. 2311, 080012 (2020)
https://doi.org/10.1063/5.0034016
Experimental investigation on tribological and mechanical behaviour of Aluminium joined with Alumina ceramic
Jayaprakash Venugopal; Anish Mariadhas; Nivin Joy; Senthilkumar Jayapalan; S. R. Aakaash; Manikandan K.; A. King Sivabalan
AIP Conf. Proc. 2311, 080013 (2020)
https://doi.org/10.1063/5.0034618
Effect of nanocellulose extracted from rice husk on the film properties of native starch based edible films
AIP Conf. Proc. 2311, 080015 (2020)
https://doi.org/10.1063/5.0033961
Study on mechanical properties of aluminium 6061 / SiC composite by single and double stir casting process
Arunkumar Thirugnanasambandam; Nivin Joy; Anish Mariadhas; K. S. Sridhar Raja; Ashish Kumar Tiwari; Buyya Venkata Sai Krishna
AIP Conf. Proc. 2311, 080016 (2020)
https://doi.org/10.1063/5.0034127
THERMAL
Computational investigation and design optimization of vortex generator for a sport utility vehicle using CFD
Ganesan Subbiah; Aymen Sharook Allaudeen; Hemanandh Janarthanam; Purushothaman Mani; Senthilkumar Gnanamani; K. S. Sridhar Raja; T. Abhesheka Raja
AIP Conf. Proc. 2311, 090001 (2020)
https://doi.org/10.1063/5.0034023
Review of oil separation technologies used in refrigeration systems
AIP Conf. Proc. 2311, 090003 (2020)
https://doi.org/10.1063/5.0033986
Performance enhancement of solar stills and analytical validation through Taguchi method
AIP Conf. Proc. 2311, 090005 (2020)
https://doi.org/10.1063/5.0034743
Investigation on steady MHD stokes flow with angular velocity of dusty fluid between parallel porous plates
AIP Conf. Proc. 2311, 090006 (2020)
https://doi.org/10.1063/5.0034118
Solar desalination using solar still enhanced by PCM and nano fluid
AIP Conf. Proc. 2311, 090008 (2020)
https://doi.org/10.1063/5.0034238
Ss/Ti-twin-S shape CMFS performance modal analysis based on finite element analysis
AIP Conf. Proc. 2311, 090011 (2020)
https://doi.org/10.1063/5.0033991
Structural analysis of a cascaded parabolic solar collector
AIP Conf. Proc. 2311, 090012 (2020)
https://doi.org/10.1063/5.0034268
Thermal analysis on a cascaded solar collector using nanofluid
AIP Conf. Proc. 2311, 090013 (2020)
https://doi.org/10.1063/5.0034281
Performance analysis of latent heat storage system by fin orientation and nano added PCM for diesel engine waste heat recovery
Karthikeyan Paramasivam; Kanimozhi Balakrishnan; Kumarasubramanian Ramar; Yuvaraja Subramani; Swaraj Bikram Samal; Rishabh Sinha
AIP Conf. Proc. 2311, 090015 (2020)
https://doi.org/10.1063/5.0034516
Fabrication and analysis of motorbike helmet using PCM for temperature control
AIP Conf. Proc. 2311, 090017 (2020)
https://doi.org/10.1063/5.0034481
Synthesis and characterisation of hydrogen fuel from bio-waste recovery
AIP Conf. Proc. 2311, 090019 (2020)
https://doi.org/10.1063/5.0034505
Experimental and numerical fatigue analysis of piston bowl in various spray pattern
AIP Conf. Proc. 2311, 090022 (2020)
https://doi.org/10.1063/5.0034293
A novel float to boost turbine efficiency using hybrid energy sources
AIP Conf. Proc. 2311, 090024 (2020)
https://doi.org/10.1063/5.0034003
Applications of thin layer modelling techniques and advances in drying of agricultural products
AIP Conf. Proc. 2311, 090025 (2020)
https://doi.org/10.1063/5.0033995
Visualization of a vortex ring from an evolving plume
AIP Conf. Proc. 2311, 090026 (2020)
https://doi.org/10.1063/5.0034727
Measuring thermal conductivity, viscosity depending on temperature silicon carbide - Therminol 55 nanofluids
Anish Mariadhas; Jayaprakash Venugopal; Jayaprabakar Jayaraman; Arunkumar Thirugnanasambandam; Kanimozhi Balakrishnan; Raj Kishan Singh; Nikhil Chittamuru
AIP Conf. Proc. 2311, 090027 (2020)
https://doi.org/10.1063/5.0034307
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
With synthetic data towards part recognition generalized beyond the training instances
Paul Koch, Marian Schlüter, et al.