Skip Nav Destination
Issues
PRELIMINARY
FUNDAMENTAL AND APPLIED PROBLEMS OF CHEMICAL TECHNOLOGY
Statistical aspects of the investigation of the mechanical strength of heterogeneous catalysts for oil refining
AIP Conf. Proc. 2285, 020001 (2020)
https://doi.org/10.1063/5.0026717
Extraction of chlorine ions from the drilling sludge water extract in the North of Tyumen region
AIP Conf. Proc. 2285, 020002 (2020)
https://doi.org/10.1063/5.0028084
A study on the synthesis steps of alumina-supported Pt/SO4/ZrO2 catalysts for isomerization of n-hexane
AIP Conf. Proc. 2285, 020003 (2020)
https://doi.org/10.1063/5.0026707
The influence of high-temperature treatment of the carbon support Sibunit and the content of ruthenium on the activity of Ru-Cs/C catalysts for ammonia synthesis
V. A. Borisov; P. A. Fedotova; K. N. Iost; V. L. Temerev; Y. V. Surovikin; A. B. Arbuzov; M. V. Trenikhin; D. A. Shlyapin
AIP Conf. Proc. 2285, 020004 (2020)
https://doi.org/10.1063/5.0027083
Influence of point defects on Cu(100) surface on thermal stability of Fe–terephtalate metal–organic networks
AIP Conf. Proc. 2285, 020006 (2020)
https://doi.org/10.1063/5.0026792
Hydroisomerization of benzene and toluene containing gasoline fraction on a platinum zeolite catalyst
AIP Conf. Proc. 2285, 020007 (2020)
https://doi.org/10.1063/5.0026703
Oxidative dehydrogenation of ethane to ethylene on the carbocatalyst
AIP Conf. Proc. 2285, 020009 (2020)
https://doi.org/10.1063/5.0027236
Influence of high temperatures on changes in the performance characteristics of motor oils when diluted with fuel
AIP Conf. Proc. 2285, 020010 (2020)
https://doi.org/10.1063/5.0026994
Removal of REE’s concentrate from spent catalysts of FCC by sulfuric-fluorine method
AIP Conf. Proc. 2285, 020012 (2020)
https://doi.org/10.1063/5.0026809
Calculation study of the coal gasification process with steam
AIP Conf. Proc. 2285, 020013 (2020)
https://doi.org/10.1063/5.0027713
Producing high energy raw materials from natural gas by gas hydrate enrichment
AIP Conf. Proc. 2285, 020015 (2020)
https://doi.org/10.1063/5.0028688
Improving the visbreaking unit in order to increase the quality and quantity of light oil products
AIP Conf. Proc. 2285, 020016 (2020)
https://doi.org/10.1063/5.0026883
Investigating the composition of liquid products of pyrolysis of hydrocarbon gases by mathematical modeling
AIP Conf. Proc. 2285, 020018 (2020)
https://doi.org/10.1063/5.0026697
Heptane and hexane isomerization on Pt/WO3-ZrO2 catalysts
AIP Conf. Proc. 2285, 020019 (2020)
https://doi.org/10.1063/5.0028364
Phase behavior of terminating oxygen layer of V2C MXene
AIP Conf. Proc. 2285, 020020 (2020)
https://doi.org/10.1063/5.0026690
Experimental researches of characteristics of bitumen reinforced with carbon nanotubes
AIP Conf. Proc. 2285, 020022 (2020)
https://doi.org/10.1063/5.0028709
CHEMICAL AND OIL AND GAS ENGINEERING
Feasibility demonstration of effective geometry local heat load radiator
AIP Conf. Proc. 2285, 030002 (2020)
https://doi.org/10.1063/5.0029677
Halocarbons in low-temperature generating systems
AIP Conf. Proc. 2285, 030004 (2020)
https://doi.org/10.1063/5.0030130
Efficiency comparison of thermodynamic cycles of lithium bromide-water absorption refrigeration machines
AIP Conf. Proc. 2285, 030005 (2020)
https://doi.org/10.1063/5.0027178
An approach to the complex critical objects based on the cascade-hierarchical topology of model complexes
AIP Conf. Proc. 2285, 030006 (2020)
https://doi.org/10.1063/5.0026734
Quasi-zero stiffness vibration isolation support with stiffness corrector based on a rubber-cord air spring
AIP Conf. Proc. 2285, 030007 (2020)
https://doi.org/10.1063/5.0027543
On the possibility of using disk impellers in low-flow oil pumps
AIP Conf. Proc. 2285, 030008 (2020)
https://doi.org/10.1063/5.0026592
Stiffness and strength characteristics research of a vibration-isolating pipe based on modeling
AIP Conf. Proc. 2285, 030009 (2020)
https://doi.org/10.1063/5.0027749
The development of a stand for visualizing and studying the gas flow in the flow cavity of a vortex jet device
AIP Conf. Proc. 2285, 030011 (2020)
https://doi.org/10.1063/5.0026796
Research of the work of the heat pump under the climatic conditions of St. Petersburg
AIP Conf. Proc. 2285, 030012 (2020)
https://doi.org/10.1063/5.0029066
The study of the channel complex heat exchange during the combustion process of producer gas
AIP Conf. Proc. 2285, 030013 (2020)
https://doi.org/10.1063/5.0026780
Assessment of the influence of the air movement on the efficiency of regenerative heat exchangers
AIP Conf. Proc. 2285, 030015 (2020)
https://doi.org/10.1063/5.0027410
Test of thrust bearing of a multiplier centrifugal compressor
AIP Conf. Proc. 2285, 030016 (2020)
https://doi.org/10.1063/5.0027306
Comparison of methods for calculating thermal deformations of screw compressor rotors
AIP Conf. Proc. 2285, 030017 (2020)
https://doi.org/10.1063/5.0027287
Energy efficiency analysis of a combined cooling system with night radiative cooling
AIP Conf. Proc. 2285, 030018 (2020)
https://doi.org/10.1063/5.0026908
Prediction of multistage reciprocating compressor operation in different modes
AIP Conf. Proc. 2285, 030019 (2020)
https://doi.org/10.1063/5.0027026
Heat-hydrodynamic analysis of two-phase flow at refrigerant in-channel boiling
AIP Conf. Proc. 2285, 030020 (2020)
https://doi.org/10.1063/5.0027315
Capacity regulation of refrigeration screw compressor at condensation temperature decrease
AIP Conf. Proc. 2285, 030021 (2020)
https://doi.org/10.1063/5.0027206
Analysis of the calculation results of the water crystallization process in a cone of spraying in a vacuum
AIP Conf. Proc. 2285, 030022 (2020)
https://doi.org/10.1063/5.0026795
Application of 3D printing technology to increase efficiency of low flow rate centrifugal compressors
AIP Conf. Proc. 2285, 030024 (2020)
https://doi.org/10.1063/5.0026905
Research of the processes of heat and mass transfer of indoor air during temperature control
AIP Conf. Proc. 2285, 030025 (2020)
https://doi.org/10.1063/5.0028244
Identification of rotating stall zones and the velocity of their movement in a centrifugal compressor
AIP Conf. Proc. 2285, 030026 (2020)
https://doi.org/10.1063/5.0028247
Methods for improving efficiency and environmental safety of cooling systems
AIP Conf. Proc. 2285, 030027 (2020)
https://doi.org/10.1063/5.0026785
Method of development and testing of turbine of fuel gas intracyclic compression under model conditions
AIP Conf. Proc. 2285, 030028 (2020)
https://doi.org/10.1063/5.0027272
Development of the calculation algorithm of the flow part main parameters of the ring straight-flow ejector
AIP Conf. Proc. 2285, 030030 (2020)
https://doi.org/10.1063/5.0030046
Experimental study of oil free scroll vacuum pump parameters
AIP Conf. Proc. 2285, 030031 (2020)
https://doi.org/10.1063/5.0028646
Experimental study of heat transfer characteristics of additive shell-and-tube heat exchangers
AIP Conf. Proc. 2285, 030033 (2020)
https://doi.org/10.1063/5.0026960
Providing equipment cavitation reserve required for tank farm cleaning system
AIP Conf. Proc. 2285, 030035 (2020)
https://doi.org/10.1063/5.0027015
Parametric study of centrifugal compressor stage vane diffuser characteristics by CFD methods
AIP Conf. Proc. 2285, 030036 (2020)
https://doi.org/10.1063/5.0026630
The study of Y+ influence on the results of ANSYS CFX flow simulation in the centrifugal compressor radial inlet
AIP Conf. Proc. 2285, 030038 (2020)
https://doi.org/10.1063/5.0028560
Experimental study of friction power in rotary vane machines
AIP Conf. Proc. 2285, 030040 (2020)
https://doi.org/10.1063/5.0029562
Flow calculation in centrifugal compressors using a quasi-three-dimensional model
AIP Conf. Proc. 2285, 030043 (2020)
https://doi.org/10.1063/5.0026704
Experimental studies of the gear pump casing vibration level
AIP Conf. Proc. 2285, 030046 (2020)
https://doi.org/10.1063/5.0029447
Automatic centrifugal compressor pre-surge detection
AIP Conf. Proc. 2285, 030047 (2020)
https://doi.org/10.1063/5.0026931
Analysis of profiles of screw vacuum pumps
D. A. Malov; E. V. Svichkar; V. S. Klyucharov; N. K. Nikulin; O. A. Shemarova; S. B. Nesterov; I. V. Avtonomova
AIP Conf. Proc. 2285, 030050 (2020)
https://doi.org/10.1063/5.0029126
Application of elastoplastic model of the fatigue crack growth to pressure vessel materials
AIP Conf. Proc. 2285, 030051 (2020)
https://doi.org/10.1063/5.0029929
Results of CFD calculations verification of high pressure centrifugal compressor stage with inlet guide vanes
AIP Conf. Proc. 2285, 030052 (2020)
https://doi.org/10.1063/5.0029656
Prospects for using foil bearings in centrifugal pumps in petrochemical industry
AIP Conf. Proc. 2285, 030055 (2020)
https://doi.org/10.1063/5.0029080
Creation of a parameterized model of a return channel flow path for CFD-researches
AIP Conf. Proc. 2285, 030056 (2020)
https://doi.org/10.1063/5.0026769
Efficiency of the drag stage application in the multistage turbomolecular vacuum pump
AIP Conf. Proc. 2285, 030058 (2020)
https://doi.org/10.1063/5.0027204
Methodology of calculation and verification of vaneless diffusers test results in a virtual wind tunnel
AIP Conf. Proc. 2285, 030059 (2020)
https://doi.org/10.1063/5.0026537
Centrifugal compressor stage impeller optimization by one-dimensional, quasi-three-dimensional and CFD methods
AIP Conf. Proc. 2285, 030060 (2020)
https://doi.org/10.1063/5.0026722
Experimental studies of deformed state of the working chamber cylindrical part of low-speed long-stroke oil-free piston units
S. S. Busarov; I. P. Aistov; K. A. Vansovich; D. S. Titov; R. Yu. Goshlya; T. A. Vinnikova; R. E. Kobyl'skiy; M. A. Fedorova
AIP Conf. Proc. 2285, 030061 (2020)
https://doi.org/10.1063/5.0029666
Analysis of the effect of the piston displacement law on the operating processes characteristics of a single-stage ammonia compressor unit
I. P. Aistov; S. S. Busarov; I. S. Busarov; A. A. Galkova; M. A. Fedorova; A. A. Kapelyuhovskaya; R. E. Kobyl'skiy; T. A. Vinnikova
AIP Conf. Proc. 2285, 030062 (2020)
https://doi.org/10.1063/5.0029667
Comparative analysis of the magnetoelectric drive with linear drives of low-speed single-stage piston units
AIP Conf. Proc. 2285, 030064 (2020)
https://doi.org/10.1063/5.0027296
Validation study of gas mixture propagation in hydrogen safety applications
AIP Conf. Proc. 2285, 030068 (2020)
https://doi.org/10.1063/5.0026624
Improving the methodology of thermodynamics calculation of real gas for the design of centrifugal compressors
AIP Conf. Proc. 2285, 030069 (2020)
https://doi.org/10.1063/5.0028243
Calculation method of R1234yf phase equilibrium curve within temperature range from 122.6 K to 367.85 K
AIP Conf. Proc. 2285, 030070 (2020)
https://doi.org/10.1063/5.0029671
Increasing the efficiency of gas turbine inlet air cooling in actual climatic conditions of Kazakhstan and Ukraine
AIP Conf. Proc. 2285, 030071 (2020)
https://doi.org/10.1063/5.0026787
Improving the efficiency of railway conditioners in actual climatic conditions of operation
AIP Conf. Proc. 2285, 030072 (2020)
https://doi.org/10.1063/5.0026789
Development of autonomous cooling systems on the basis of renewable and waste sources of heat energy
AIP Conf. Proc. 2285, 030073 (2020)
https://doi.org/10.1063/5.0026909
Separator operation model in the form of the Cobb-Douglas production function
AIP Conf. Proc. 2285, 030075 (2020)
https://doi.org/10.1063/5.0028137
Development of a power supply system for autonomous control and communication devices using hydrogen fuel cells
AIP Conf. Proc. 2285, 030076 (2020)
https://doi.org/10.1063/5.0029249
Heat loss recovery system of the mobile compressor unit based on the absorption refrigerating machine
AIP Conf. Proc. 2285, 030077 (2020)
https://doi.org/10.1063/5.0029564
Improvement of operational characteristics of plain bearings in the oil and gas production devices
AIP Conf. Proc. 2285, 030079 (2020)
https://doi.org/10.1063/5.0026869
Experimental research of characteristics of the thermal stabilizer of the soil in changing weather conditions
AIP Conf. Proc. 2285, 030080 (2020)
https://doi.org/10.1063/5.0028811
High-speed vacuum pipeline pumping system power consumption estimation
AIP Conf. Proc. 2285, 030083 (2020)
https://doi.org/10.1063/5.0026625
Utilizing the heat of gas module by an absorption lithium-bromide chiller with an ejector booster stage
AIP Conf. Proc. 2285, 030084 (2020)
https://doi.org/10.1063/5.0026788
MATERIALS SCIENCE AND CONSTRUCTION MATERIALS
The effect of superconductive carbon black on the properties of supercapacitor electrode
AIP Conf. Proc. 2285, 040001 (2020)
https://doi.org/10.1063/5.0026906
Mechanical and tribological properties of thermoplastic polyimide based composites loaded with various PTFE fillers
AIP Conf. Proc. 2285, 040005 (2020)
https://doi.org/10.1063/5.0026665
Mechanical and tribological properties of thermoplastic polyetheretherketone based nanocomposites
AIP Conf. Proc. 2285, 040006 (2020)
https://doi.org/10.1063/5.0026664
The ion implantation influence on the microhardness
AIP Conf. Proc. 2285, 040007 (2020)
https://doi.org/10.1063/5.0028020
MWCNT structure modification at He:O plasma treatment
AIP Conf. Proc. 2285, 040009 (2020)
https://doi.org/10.1063/5.0027701
The use of multi-walled carbon nanotubes as electrode materials of supercapacitors
AIP Conf. Proc. 2285, 040010 (2020)
https://doi.org/10.1063/5.0027220
Adsorption cryogenic vacuum pumps with sorbent elements based on zeolite and cooper powders
AIP Conf. Proc. 2285, 040011 (2020)
https://doi.org/10.1063/5.0029576
A new method of manufacturing products from polymeric composite materials
AIP Conf. Proc. 2285, 040013 (2020)
https://doi.org/10.1063/5.0028019
Influence of characteristics of adhesional additives on properties of rubber mixtures based on SKI-3
AIP Conf. Proc. 2285, 040015 (2020)
https://doi.org/10.1063/5.0027099
The biodegradable coating from gluten for paraffined paper
AIP Conf. Proc. 2285, 040016 (2020)
https://doi.org/10.1063/5.0027298
The effect of biomodification of gluten on properties of a gluten film for lamination of a paperboard
AIP Conf. Proc. 2285, 040017 (2020)
https://doi.org/10.1063/5.0027295
The thickness of the surface layer of porous silicon
AIP Conf. Proc. 2285, 040018 (2020)
https://doi.org/10.1063/5.0029621
Impedance spectroscopy method of studying the pitting electrochemical characteristics
AIP Conf. Proc. 2285, 040019 (2020)
https://doi.org/10.1063/5.0026983
Elaboration of technological process criteria for multicycle rolling of sliced materials of system Al-Cu
AIP Conf. Proc. 2285, 040020 (2020)
https://doi.org/10.1063/5.0029653
The effect of inert fillers on the properties of porous rubbers
AIP Conf. Proc. 2285, 040021 (2020)
https://doi.org/10.1063/5.0027255
Features of hardening of metal deposited by flux-cored wire 10G7M3S2AFTU as a result of aging
AIP Conf. Proc. 2285, 040022 (2020)
https://doi.org/10.1063/5.0027263
Wear resistance of steel obtained by surfacing with flux-cored wire 15N8G6M3FTB
AIP Conf. Proc. 2285, 040023 (2020)
https://doi.org/10.1063/5.0027264
Investigation new material based on silicon carbide for manufacture of fire and explosion protection
AIP Conf. Proc. 2285, 040024 (2020)
https://doi.org/10.1063/5.0027483
The formation of a multilayer structure with integrated membranes based on channel silicon
AIP Conf. Proc. 2285, 040025 (2020)
https://doi.org/10.1063/5.0028140
Work function, surface energy and properties of highly entropic coatings
AIP Conf. Proc. 2285, 040026 (2020)
https://doi.org/10.1063/5.0028171
Hydrogen cartridges material based on activated aluminum for fuel cells with output10÷100 W
AIP Conf. Proc. 2285, 040027 (2020)
https://doi.org/10.1063/5.0027305
Microstructure of SLM Ti-6Al-4V parts subjected to electropulsing assisted ultrasonic impact treatment
AIP Conf. Proc. 2285, 040029 (2020)
https://doi.org/10.1063/5.0026672
Improving fatigue durability of SLM Ti-6Al-4V parts by combined ultrasonic impact-electrophysical treatment
AIP Conf. Proc. 2285, 040030 (2020)
https://doi.org/10.1063/5.0026662
A combined method for increasing wear resistance of Ti-6Al-4V parts fabricated by additive manufacturing
AIP Conf. Proc. 2285, 040032 (2020)
https://doi.org/10.1063/5.0026676
MONITORING, DIAGNOSTICS AND AUTOMATION
The task of local control coordination using the feasible decomposition method
AIP Conf. Proc. 2285, 050002 (2020)
https://doi.org/10.1063/5.0027425
The process modeling of the quality monitoring tool at the engineering stage of polymer materials manufacturing
AIP Conf. Proc. 2285, 050003 (2020)
https://doi.org/10.1063/5.0027362
Lower operating costs by predicting unscheduled downtime with machine learning
AIP Conf. Proc. 2285, 050006 (2020)
https://doi.org/10.1063/5.0026925
Information automated gas leakage control system in buildings and structures
AIP Conf. Proc. 2285, 050007 (2020)
https://doi.org/10.1063/5.0027201
Automatic monitoring of pollutants at oil-producing facilities
AIP Conf. Proc. 2285, 050008 (2020)
https://doi.org/10.1063/5.0027077
Diagnostics of the lubrication system and cylinder piston group of automobile diesel
AIP Conf. Proc. 2285, 050011 (2020)
https://doi.org/10.1063/5.0027137
The scalar control mode optimization of a pump unit electric drive for oil transportation on a refinery
AIP Conf. Proc. 2285, 050014 (2020)
https://doi.org/10.1063/5.0026689
Fourier-transform IR spectroscopy method for evaluating structure of polymerized plates and flexographic forms
AIP Conf. Proc. 2285, 050015 (2020)
https://doi.org/10.1063/5.0028106
Elastic-plastic deformation of printing elements of flexographic plate under external influence
AIP Conf. Proc. 2285, 050016 (2020)
https://doi.org/10.1063/5.0028107
Issues of working capacity monitoring and rational design of flange joints
AIP Conf. Proc. 2285, 050017 (2020)
https://doi.org/10.1063/5.0026701
Search for new materials for monitoring ammonia and express diagnostics of diseases
AIP Conf. Proc. 2285, 050018 (2020)
https://doi.org/10.1063/5.0026678
Decentralized control modeling by feasible decomposition method
AIP Conf. Proc. 2285, 050021 (2020)
https://doi.org/10.1063/5.0027422
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.