Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 2283, Issue 1

29 October 2020

PRELIMINARY

Preface: Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME 2019

AIP Conf. Proc. 2283, 010001 (2020) https://doi.org/10.1063/12.0001159

View articletitled, Preface: Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME 2019

Open the PDF for in another window

Committees: Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME 2019

AIP Conf. Proc. 2283, 010002 (2020) https://doi.org/10.1063/12.0001305

View articletitled, Committees: Proceedings of International Conference on Recent Trends in Mechanical and Materials Engineering ICRTMME 2019

Open the PDF for in another window

ARTICLES

A modern low-cost furrow cutting machine

T. Babu; A. Ravinthiran; S. Rohit Krishnan; P. Muthu Ananda; V. Pavitharan

AIP Conf. Proc. 2283, 020001 (2020) https://doi.org/10.1063/5.0025075

Abstract

View articletitled, A modern low-cost furrow cutting machine

Open the PDF for in another window

Flow variations and comparisons of heat exchanger headers with different cross sections

A. Ravinthiran; T. Babu; G. Thilak Raj; P. Yaswanth Siddaarth; K. Selva Kamatchi

AIP Conf. Proc. 2283, 020002 (2020) https://doi.org/10.1063/5.0029256

Abstract

View articletitled, Flow variations and comparisons of heat exchanger headers with different cross sections

Open the PDF for in another window

Analysis of hybrid metal matrix composite piston for automobile application

T. P. Premnandh; Vidvath Krishna; K. R. Akshay; Swasthik Pranav; M. Maneesh Kumar; V. Karthik Shankar

AIP Conf. Proc. 2283, 020003 (2020) https://doi.org/10.1063/5.0025420

Abstract

View articletitled, Analysis of hybrid metal matrix composite piston for automobile application

Open the PDF for in another window

Stress analysis of connecting rod for 1500 hp engine

S. A. Muhammed Abraar; N. Suresh; M. Rameeza

AIP Conf. Proc. 2283, 020004 (2020) https://doi.org/10.1063/5.0025460

Abstract

View articletitled, Stress analysis of connecting rod for 1500 hp engine

Open the PDF for in another window

CFD case studies on the acoustic performance and backpressure changes on modified reactive mufflers

S. Vijaya Narasimhan; S. Mahesh; Manu Sivan; Shiv Shankar Nair

AIP Conf. Proc. 2283, 020005 (2020) https://doi.org/10.1063/5.0025346

Abstract

View articletitled, CFD case studies on the acoustic performance and backpressure changes on modified reactive mufflers

Open the PDF for in another window

Effect of sub-zero treatment on tensile behavior of ASS 316L

Anil Kalluri; Satyanarayana Kosaraju; Swadesh Kumar Singh

AIP Conf. Proc. 2283, 020006 (2020) https://doi.org/10.1063/5.0024996

Abstract

View articletitled, Effect of sub-zero treatment on tensile behavior of ASS 316L

Open the PDF for in another window

A comparative study on the analysis of wheel hub for landing gear application

Bharath Sunil; Abhijith Vijayakumar; Surya Balaji; Vaishnav Shajikumar; E. P. Sreedev; K. V. Shankar; P. P. Harishankar

AIP Conf. Proc. 2283, 020007 (2020) https://doi.org/10.1063/5.0025423

Abstract

View articletitled, A comparative study on the analysis of wheel hub for landing gear application

Open the PDF for in another window

Analysis of nonlinear material and steel fiber content in the double layers concrete shell

Thanh Quang Khai Lam; Thi My Dung Do

AIP Conf. Proc. 2283, 020008 (2020) https://doi.org/10.1063/5.0024892

Abstract

View articletitled, Analysis of nonlinear material and steel fiber content in the double layers concrete shell

Open the PDF for in another window

Dynamic analysis of a quarter car model using power law damper

Ritvik Dobriyal; Vipul Paliwal; Pushpendra Kumar

AIP Conf. Proc. 2283, 020009 (2020) https://doi.org/10.1063/5.0024896

Abstract

View articletitled, Dynamic analysis of a quarter car model using power law damper

Open the PDF for in another window

Stress analysis of soft polymer material with beam structure

Narendra Gariya; Brijesh Prasad; Pushpendra Kumar

AIP Conf. Proc. 2283, 020010 (2020) https://doi.org/10.1063/5.0024949

Abstract

View articletitled, Stress analysis of soft polymer material with beam structure

Open the PDF for in another window

Effect of channel shapes on fluid flow and heat transfer in microchannel - A numerical study

R. Avinash Kumar; M. Kavitha; P. Manoj Kumar; S. Sriman Adhithya

AIP Conf. Proc. 2283, 020011 (2020) https://doi.org/10.1063/5.0024961

Abstract

View articletitled, Effect of channel shapes on fluid flow and heat transfer in microchannel - A numerical study

Open the PDF for in another window

Analysis of micro structural characteristics and mechanical properties of aluminium joint welded by CMT method

S. M. Abishek; S. Narendran; S. Murali; R. Rajagopalan

AIP Conf. Proc. 2283, 020012 (2020) https://doi.org/10.1063/5.0024990

Abstract

View articletitled, Analysis of micro structural characteristics and mechanical properties of aluminium joint welded by CMT method

Open the PDF for in another window

Heat transfer study on DI diesel engine for various fuels

Sibi Pugalenthi; Raghunath Adimoolam Ganesan; Raghu Palani

AIP Conf. Proc. 2283, 020013 (2020) https://doi.org/10.1063/5.0025086

Abstract

View articletitled, Heat transfer study on DI diesel engine for various fuels

Open the PDF for in another window

Improving operational efficiency of bank sector using simulation techniques

J. Jayaprakash; M. Melkamu Teshome

AIP Conf. Proc. 2283, 020014 (2020) https://doi.org/10.1063/5.0024926

Abstract

View articletitled, Improving operational efficiency of bank sector using simulation techniques

Open the PDF for in another window

Development and ability inspection of cater-BOT

M. Krishna; Aditya Ghalsasi; Dhananjay Saha; V. Thanigaivelan; J. Silkson John

AIP Conf. Proc. 2283, 020015 (2020) https://doi.org/10.1063/5.0024901

Abstract

View articletitled, Development and ability inspection of cater-BOT

Open the PDF for in another window

Comparison study of prosopis juliflora and coir fiber composite: A review

S. Ganesh; A. Murugan; G. S. Sudhir; G. Hari Prasad

AIP Conf. Proc. 2283, 020016 (2020) https://doi.org/10.1063/5.0026669

Abstract

View articletitled, Comparison study of prosopis juliflora and coir fiber composite: A review

Open the PDF for in another window

Green synthesis of graphene sand composites for the removal of hazardous chemicals from water

Nidhin Dileepkumar; Shankar Ganesh; Sajith Gopinathan; Jitha S. Jayan; Appukuttan Saritha; Geena Prasad; Jeetu. S. Babu

AIP Conf. Proc. 2283, 020017 (2020) https://doi.org/10.1063/5.0025108

Abstract

View articletitled, Green synthesis of graphene sand composites for the removal of hazardous chemicals from water

Open the PDF for in another window

Synthesis and characterization of aluminium 6061 with ZirSiO₄ and graphite

D. Krishnakumar; R. Venkatachalam; R. Rameshkumar; V. Anadakrishnan

AIP Conf. Proc. 2283, 020018 (2020) https://doi.org/10.1063/5.0024887

Abstract

View articletitled, Synthesis and characterization of aluminium 6061 with ZirSiO4 and graphite

Open the PDF for in another window

CFD analysis of turbocharger with wastegate

A. Joshua; B. Prabhakaran; A. Vignesh

AIP Conf. Proc. 2283, 020019 (2020) https://doi.org/10.1063/5.0025994

Abstract

View articletitled, CFD analysis of turbocharger with wastegate

Open the PDF for in another window

Performance and combusted emission gases characteristics investigation of honge methyl ester blended biodiesel

D. Krishnakumar; R. Nirmalraja; V. Thanigaivelan

AIP Conf. Proc. 2283, 020020 (2020) https://doi.org/10.1063/5.0024889

Abstract

View articletitled, Performance and combusted emission gases characteristics investigation of honge methyl ester blended biodiesel

Open the PDF for in another window

Stiffness analysis of composite beams using roller clamps

P. G. Vivek; Ankuran Saha

AIP Conf. Proc. 2283, 020021 (2020) https://doi.org/10.1063/5.0024975

Abstract

View articletitled, Stiffness analysis of composite beams using roller clamps

Open the PDF for in another window

Mechanical and microstructural analysis of Al-W-Sn metal matrix composites

V. Hari Krishnan; N. Mani; S. Subin Anand; R. Guruvendhan; S. Vishal

AIP Conf. Proc. 2283, 020022 (2020) https://doi.org/10.1063/5.0024902

Abstract

View articletitled, Mechanical and microstructural analysis of Al-W-Sn metal matrix composites

Open the PDF for in another window

Effect of crab shell particles on agave sisalana fibers reinforced polymer composites

A. Soundhara; K. Jayakrishna

AIP Conf. Proc. 2283, 020023 (2020) https://doi.org/10.1063/5.0024874

Abstract

View articletitled, Effect of crab shell particles on agave sisalana fibers reinforced polymer composites

Open the PDF for in another window

Assessment of sustainability in supply chain management for industry 4.0 requirements

Manavalan Ethirajan; Jayakrishna Kandasamy

AIP Conf. Proc. 2283, 020024 (2020) https://doi.org/10.1063/5.0024872

Abstract

View articletitled, Assessment of sustainability in supply chain management for industry 4.0 requirements

Open the PDF for in another window

Potential assessment of Al 7075/BN composites for lightweight applications

Beyanagari Sudheer Reddy; Kannan Chidambaram; Jayakrishna Kandasamy

AIP Conf. Proc. 2283, 020025 (2020) https://doi.org/10.1063/5.0025069

Abstract

View articletitled, Potential assessment of Al 7075/BN composites for lightweight applications

Open the PDF for in another window

A case study on failure analysis of fender mounting bracket of tractors by DMAIC approach in Southern India

M. Balasubramanian; S. Radhakrishnan; B. R. Rameshbapu; A. Nagaraja

AIP Conf. Proc. 2283, 020026 (2020) https://doi.org/10.1063/5.0024886

Abstract

View articletitled, A case study on failure analysis of fender mounting bracket of tractors by DMAIC approach in Southern India

Open the PDF for in another window

Design and analysis of connecting rod with different materials for high fatigue life

Shaik Himam Saheb

AIP Conf. Proc. 2283, 020027 (2020) https://doi.org/10.1063/5.0024897

Abstract

View articletitled, Design and analysis of connecting rod with different materials for high fatigue life

Open the PDF for in another window

Solidification behaviour of squeeze cast aluminium composites

P. Gurusamy; S. Balasivanandha Prabu; P. Nagasankar; V. Muthuraman; V. Mohanavel

AIP Conf. Proc. 2283, 020028 (2020) https://doi.org/10.1063/5.0025429

Abstract

View articletitled, Solidification behaviour of squeeze cast aluminium composites

Open the PDF for in another window

Performance investigation on advanced high yield strength deformed steel used in structural applications

P. S. Senthil Kumar; C. Sivakandhan; K. Vinoth Babu; D. Pritima; Satyanarayana; S. Marichamy

AIP Conf. Proc. 2283, 020029 (2020) https://doi.org/10.1063/5.0025427

Abstract

View articletitled, Performance investigation on advanced high yield strength deformed steel used in structural applications

Open the PDF for in another window

Active safety enhanced braking system with driver condition monitoring for passenger vehicles

C. Dineshkumar; A. Sonya; C. K. Arvinda Pandian; T. R. Tamilarasan; S. Dhanush; K. Abdur Rahman

AIP Conf. Proc. 2283, 020030 (2020) https://doi.org/10.1063/5.0029214

Abstract

View articletitled, Active safety enhanced braking system with driver condition monitoring for passenger vehicles

Open the PDF for in another window

Evaluation of mechanical properties of aluminium 6063 - Borosilicate reinforced metal matrix composite

I. Karthikeyan; V. Dhinakaran; V. Rajkumar

AIP Conf. Proc. 2283, 020031 (2020) https://doi.org/10.1063/5.0025114

Abstract

View articletitled, Evaluation of mechanical properties of aluminium 6063 - Borosilicate reinforced metal matrix composite

Open the PDF for in another window

Purification of contaminated water using solar tracking panels and polypropylene disk

P. Sivaraman; T. Nithyanandhan; M. K. Prabhu; K. Umanath; S. N. Kishore; G. Rahul Kumar

AIP Conf. Proc. 2283, 020032 (2020) https://doi.org/10.1063/5.0025401

Abstract

View articletitled, Purification of contaminated water using solar tracking panels and polypropylene disk

Open the PDF for in another window

Investigation of mechanical properties for coconut coir and tamarind fiber reinforced composite materials

P. Sakthivel; S. Santhosh; K. Sriram; S. Sanjay; N. Mohan Raj

AIP Conf. Proc. 2283, 020033 (2020) https://doi.org/10.1063/5.0024927

Abstract

View articletitled, Investigation of mechanical properties for coconut coir and tamarind fiber reinforced composite materials

Open the PDF for in another window

An experimental analysis of AA 2025 tube plate with commercial copper tube by gas tungsten arc welding

N. Mathan Kumar; S. Kannan; N. Mohanraj; L. A. Kumaraswamidhas

AIP Conf. Proc. 2283, 020034 (2020) https://doi.org/10.1063/5.0024922

Abstract

View articletitled, An experimental analysis of AA 2025 tube plate with commercial copper tube by gas tungsten arc welding

Open the PDF for in another window

Influence of image pixels and image contrasts in computing 2D geometrical properties using MATLAB

T. Prabaharan; P. Periasamy; V. Mugendiran; M. Varsha Shree

AIP Conf. Proc. 2283, 020035 (2020) https://doi.org/10.1063/5.0025041

Abstract

View articletitled, Influence of image pixels and image contrasts in computing 2D geometrical properties using MATLAB

Open the PDF for in another window

Performance and emission characteristics of diesel blended with sweet lime peel oil and corn oil

G. Ragothaman; T. Mothilal; M. D. Rajkamal; S. Kaliappan; S. Mathavan

AIP Conf. Proc. 2283, 020036 (2020) https://doi.org/10.1063/5.0024898

Abstract

View articletitled, Performance and emission characteristics of diesel blended with sweet lime peel oil and corn oil

Open the PDF for in another window

Analysis on mechanical properties of wood plastic composite

T. Mothilal; G. Ragothaman; D. Joseph Manuel; S. Socrates; S. Mathavan

AIP Conf. Proc. 2283, 020037 (2020) https://doi.org/10.1063/5.0024893

Abstract

View articletitled, Analysis on mechanical properties of wood plastic composite

Open the PDF for in another window

CFD analysis of modified fuel injector in splash area

R. Rajasekar; U. Logesh; J. Paul Udayan Gomez

AIP Conf. Proc. 2283, 020038 (2020) https://doi.org/10.1063/5.0026097

Abstract

View articletitled, CFD analysis of modified fuel injector in splash area

Open the PDF for in another window

Combined effects of water emulsion and CH₃NO₂ (nitromethane) additive on combustion performance and emissions characteristics of a single-cylinder diesel engine using neem and cotton seed oil as biodiesel blends

R. Rajasekar; S. Premnath; S. Lakshmi Sankar; R. Sakthivel

AIP Conf. Proc. 2283, 020039 (2020) https://doi.org/10.1063/5.0026082

Abstract

View articletitled, Combined effects of water emulsion and CH3NO2 (nitromethane) additive on combustion performance and emissions characteristics of a single-cylinder diesel engine using neem and cotton seed oil as biodiesel blends

Open the PDF for in another window

Fabrication and evaluation of mechanical property of glass fiber composites

B. Senthilkumar; J. Jayapriya; D. Muruganadam; M. Shantharaja; K. Karthika

AIP Conf. Proc. 2283, 020040 (2020) https://doi.org/10.1063/5.0025082

Abstract

View articletitled, Fabrication and evaluation of mechanical property of glass fiber composites

Open the PDF for in another window

Experimental investigation of corrosion properties of solar receiver pipe made of SS304

V. Sriram; B. Kanimozhi

AIP Conf. Proc. 2283, 020041 (2020) https://doi.org/10.1063/5.0024935

Abstract

View articletitled, Experimental investigation of corrosion properties of solar receiver pipe made of SS304

Open the PDF for in another window

Tribological characteristics of TiO₂ particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator

S. Saravanan; S. T. Jayasuthahar; V. Dhinakaran; S. Sankar

AIP Conf. Proc. 2283, 020042 (2020) https://doi.org/10.1063/5.0024981

Abstract

View articletitled, Tribological characteristics of TiO2 particles reinforced aluminum nanocomposites produced via liquid metallurgy techniques with ultrasonic vibrator

Open the PDF for in another window

Studies of the characterization of weld joint created by using friction stir welding with stellite stir tool

G. Britto Joseph; T. N. Valarmathi; A. John Rajan; K. Pawana Sudeer Kumar; S. Prasath

AIP Conf. Proc. 2283, 020043 (2020) https://doi.org/10.1063/5.0024930

Abstract

View articletitled, Studies of the characterization of weld joint created by using friction stir welding with stellite stir tool

Open the PDF for in another window

Updatable features for two-wheeler’s by IOT

P. A. Nigal Ashik; N. Manoj; P. Subashchandrabose; J. Vairamuthu; P. Suseendhar

AIP Conf. Proc. 2283, 020044 (2020) https://doi.org/10.1063/5.0026127

Abstract

View articletitled, Updatable features for two-wheeler’s by IOT

Open the PDF for in another window

Design of an optimal ramjet inlet using meta-heuristic optimization scheme

L. Prabhu; B. Eswara Kumar; S. Teja Swaroop Reddy

AIP Conf. Proc. 2283, 020045 (2020) https://doi.org/10.1063/5.0025071

Abstract

View articletitled, Design of an optimal ramjet inlet using meta-heuristic optimization scheme

Open the PDF for in another window

Generative design study of a remote-controlled plane’s wing ribs

Shawn Joseph D’mello; S. Renold Elsen; J. Ronald Aseer

AIP Conf. Proc. 2283, 020046 (2020) https://doi.org/10.1063/5.0024955

Abstract

View articletitled, Generative design study of a remote-controlled plane’s wing ribs

Open the PDF for in another window

Experimental investigation on mechanical behavior of synthetic based bidirectional reinforced hybrid epoxy laminates

S. Indrasena Reddy; L. Prabhu

AIP Conf. Proc. 2283, 020047 (2020) https://doi.org/10.1063/5.0025072

Abstract

View articletitled, Experimental investigation on mechanical behavior of synthetic based bidirectional reinforced hybrid epoxy laminates

Open the PDF for in another window

Finite element modeling and damping properties of micro cellulose bahunia racemosa fiber reinforced nylon/polyester hybrid composites

J. Ronald Aseer; S. Renold Elsen; Surendarnath; K. Jegadeesan; A. Mohammed Rilwan

AIP Conf. Proc. 2283, 020048 (2020) https://doi.org/10.1063/5.0024960

Abstract

View articletitled, Finite element modeling and damping properties of micro cellulose bahunia racemosa fiber reinforced nylon/polyester hybrid composites

Open the PDF for in another window

Investigation of elevated temperature erosion mechanisms and erosion behavior of Waspaloy (superalloy) under hot air jet conditions

K. G. Thirugnanasambantham; M. Pankajrishikesh; I. G. Vishal; A. Anton Rishab Sahaya; S. Sibi Nishanth; G. Nithish; S. Sanjit Kanna

AIP Conf. Proc. 2283, 020049 (2020) https://doi.org/10.1063/5.0029265

Abstract

View articletitled, Investigation of elevated temperature erosion mechanisms and erosion behavior of Waspaloy (superalloy) under hot air jet conditions

Open the PDF for in another window

SPIDER silk fiber: A brief review on molecular structure, properties and applications of spider silk

K. G. Thirugnanasambantham; R. Keerthi Vaasan; S. Kishore; S. Anirudh; K. Bala Kumaran; P. Mathan Kumar

AIP Conf. Proc. 2283, 020050 (2020) https://doi.org/10.1063/5.0024918

Abstract

View articletitled, SPIDER silk fiber: A brief review on molecular structure, properties and applications of spider silk

Open the PDF for in another window

A novel integration of battery system in automotive vehicle

R. Aravindan; K. G. Thirugnanasambantham; T. Ajay Kumar; M. Naresh Viswaraj; K. Suthershan

AIP Conf. Proc. 2283, 020051 (2020) https://doi.org/10.1063/5.0024924

Abstract

View articletitled, A novel integration of battery system in automotive vehicle

Open the PDF for in another window

Investigations on modified vertical axis wind turbine blades

G. Sakthi Balan; V. Santhosh Kumar; M. Ravichandran

AIP Conf. Proc. 2283, 020052 (2020) https://doi.org/10.1063/5.0025034

Abstract

View articletitled, Investigations on modified vertical axis wind turbine blades

Open the PDF for in another window

Investigations on ultrasonic machining of tellurium copper metal matrix

B. Stalin; T. Vishnu Vardhan; S. Marichamy; J. Vairamuthu; M. Ravichandran; V. Dhinakaran

AIP Conf. Proc. 2283, 020053 (2020) https://doi.org/10.1063/5.0024967

Abstract

View articletitled, Investigations on ultrasonic machining of tellurium copper metal matrix

Open the PDF for in another window

Machining and abrasive wear performance of tantalum carbide based stellite metal matrix composite

P. Ganesan; S. Paulsingarayar; S. Joseph Dominic Vijayakumar; S. Sridhar; D. Madan

AIP Conf. Proc. 2283, 020054 (2020) https://doi.org/10.1063/5.0029320

Abstract

View articletitled, Machining and abrasive wear performance of tantalum carbide based stellite metal matrix composite

Open the PDF for in another window

Fatigue analysis of similar and dissimilar spot welds

Rahul Agarwal; V. Dhinakaran; T. Jagadeesha

AIP Conf. Proc. 2283, 020055 (2020) https://doi.org/10.1063/5.0024909

Abstract

View articletitled, Fatigue analysis of similar and dissimilar spot welds

Open the PDF for in another window

Finite element analysis of strength of different non-permanent joints subjected to eccentric loading

Nihal Saji; V. Dhinakaran; T. Jagadeesha

AIP Conf. Proc. 2283, 020056 (2020) https://doi.org/10.1063/5.0024910

Abstract

View articletitled, Finite element analysis of strength of different non-permanent joints subjected to eccentric loading

Open the PDF for in another window

Size optimization of shoulder filleted shafts with relief grooves for improving their fatigue life

S. Prajwal; V. Dhinakaran; T. Jagadeesha

AIP Conf. Proc. 2283, 020057 (2020) https://doi.org/10.1063/5.0024911

Abstract

View articletitled, Size optimization of shoulder filleted shafts with relief grooves for improving their fatigue life

Open the PDF for in another window

Study and analysis of stress and pressure variations on Indian railway wheel

C. H. Veera Kishore; V. Dhinakaran; T. Jagadeesha

AIP Conf. Proc. 2283, 020058 (2020) https://doi.org/10.1063/5.0024912

Abstract

View articletitled, Study and analysis of stress and pressure variations on Indian railway wheel

Open the PDF for in another window

Topology optimization of rigid flanged couplings using finite element analysis

Muhammad Rashid; V. Dhinakaran; T. Jagadeesha

AIP Conf. Proc. 2283, 020059 (2020) https://doi.org/10.1063/5.0024913

Abstract

View articletitled, Topology optimization of rigid flanged couplings using finite element analysis

Open the PDF for in another window

Taguchi parametric optimization on stellite metal matrix using metal inert gas weld

D. Madan; K. Vinoth Babu; P. Gopi Krishnan; S. Marichamy; P. Ganesan

AIP Conf. Proc. 2283, 020060 (2020) https://doi.org/10.1063/5.0025720

Abstract

View articletitled, Taguchi parametric optimization on stellite metal matrix using metal inert gas weld

Open the PDF for in another window

The effect of impact damper on vibration control in internal turning operation

E. Mohan; L. Mamundi Azaath; S. Marichamy; V. Dhinakaran

AIP Conf. Proc. 2283, 020061 (2020) https://doi.org/10.1063/5.0025023

Abstract

View articletitled, The effect of impact damper on vibration control in internal turning operation

Open the PDF for in another window

Experimental investigation on diffusion bonding of dissimilar metals

R. Srimurugan; S. Vijay Ananth; Arunvasantha Geethan; V. Jayaseelan; J. Francis Xavier

AIP Conf. Proc. 2283, 020062 (2020) https://doi.org/10.1063/5.0025159

Abstract

View articletitled, Experimental investigation on diffusion bonding of dissimilar metals

Open the PDF for in another window

Optimizations of extrusion semidie angle and fabrication of extrusion die

V. Jayaseelan; Arunvasantha Geethan; J. Francis Xavier; R. Srimurugan; S. Vijay Ananth

AIP Conf. Proc. 2283, 020063 (2020) https://doi.org/10.1063/5.0025152

Abstract

View articletitled, Optimizations of extrusion semidie angle and fabrication of extrusion die

Open the PDF for in another window

Experimental investigation glass/sodium oxidanide treated banana fiber hybrid

A. Parthiban; V. Vijayan; R. Saravanan; T. Sathish; I. J. Isaac Premkumar; Sanjeevi Basker

AIP Conf. Proc. 2283, 020064 (2020) https://doi.org/10.1063/5.0024982

Abstract

View articletitled, Experimental investigation glass/sodium oxidanide treated banana fiber hybrid

Open the PDF for in another window

Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite

Sanjeevi Basker; A. Parthiban; R. Saravanan; V. Vijayan; T. Sathish; I. J. Isaac Premkumar

AIP Conf. Proc. 2283, 020065 (2020) https://doi.org/10.1063/5.0024883

Abstract

View articletitled, Influence of chemical treatment in synthesize and characterization sisal/glass hybrid composite

Open the PDF for in another window

Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite

V. Vijayan; T. Sathish; R. Saravanan; I. J. Isaac Premkumar; Sanjeevi Basker; A. Parthiban

AIP Conf. Proc. 2283, 020066 (2020) https://doi.org/10.1063/5.0024985

Abstract

View articletitled, Synthesize and characterizations of glass/treated selective sisal fiber hybrid composite

Open the PDF for in another window

Multiply of process speed, quality and safety through low-cost automation – A case study

T. Sathish; I. J. Isaac Premkumar; R. Saravanan; Sanjeevi Basker; A. Parthiban; V. Vijayan

AIP Conf. Proc. 2283, 020067 (2020) https://doi.org/10.1063/5.0024959

Abstract

View articletitled, Multiply of process speed, quality and safety through low-cost automation – A case study

Open the PDF for in another window

Dwindling setup time through a low-cost mechanization – A case study

I. J. Isaac Premkumar; Sanjeevi Basker; R. Saravanan; V. Vijayan; A. Parthiban; T. Sathish

AIP Conf. Proc. 2283, 020068 (2020) https://doi.org/10.1063/5.0025415

Abstract

View articletitled, Dwindling setup time through a low-cost mechanization – A case study

Open the PDF for in another window

Synthesize and characterization of fly ash based nanocomposites

T. Gopalakrishnan; R. Saravanan; S. Ajith Arul Daniel

AIP Conf. Proc. 2283, 020069 (2020) https://doi.org/10.1063/5.0025012

Abstract

View articletitled, Synthesize and characterization of fly ash based nanocomposites

Open the PDF for in another window

Six sigma’s ECRS technique to down cost and time of manufacturing – An experimental investigation

R. Saravanan; M. S. Srinivasa Rao; Nagasrisaihari Sunkara; T. Malyadri

AIP Conf. Proc. 2283, 020070 (2020) https://doi.org/10.1063/5.0025016

Abstract

View articletitled, Six sigma’s ECRS technique to down cost and time of manufacturing – An experimental investigation

Open the PDF for in another window

Experimental exploration on influence of gas nitriding and chromium coated piston rings in reduction of wear and lubricant consumption in petrol engines

R. Saravanan; Nagasrisaihari Sunkara; M. S. Srinivasa Rao; T. Malyadrib

AIP Conf. Proc. 2283, 020071 (2020) https://doi.org/10.1063/5.0025022

Abstract

View articletitled, Experimental exploration on influence of gas nitriding and chromium coated piston rings in reduction of wear and lubricant consumption in petrol engines

Open the PDF for in another window

Structural exploration for materials’ validity of suspension manifold of two-wheeler

R. Saravanan; Avinash Malladi; V. N. Aneesh

AIP Conf. Proc. 2283, 020072 (2020) https://doi.org/10.1063/5.0025025

Abstract

View articletitled, Structural exploration for materials’ validity of suspension manifold of two-wheeler

Open the PDF for in another window

Exploration of suitability of material for helical coil spring of automobile light vehicle suspension – A numerical validation

R. Saravanan; V. N. Aneesh; Avinash Malladi

AIP Conf. Proc. 2283, 020073 (2020) https://doi.org/10.1063/5.0025026

Abstract

View articletitled, Exploration of suitability of material for helical coil spring of automobile light vehicle suspension – A numerical validation

Open the PDF for in another window

Exploration of appropriateness of material for impeller of turbocharger – A numerical validation

R. Saravanan; Avinash Malladi; V. N. Aneesh

AIP Conf. Proc. 2283, 020074 (2020) https://doi.org/10.1063/5.0025027

Abstract

View articletitled, Exploration of appropriateness of material for impeller of turbocharger – A numerical validation

Open the PDF for in another window

Lamina designs in ABAQUS–a validated approach

R. Saravanan; Avinash Malladi; V. N. Aneesh

AIP Conf. Proc. 2283, 020075 (2020) https://doi.org/10.1063/5.0025028

Abstract

View articletitled, Lamina designs in ABAQUS–a validated approach

Open the PDF for in another window

Exploration of appropriateness of material for diaphragm spring of an automobile clutch – A numerical validation

R. Saravanan; V. N. Aneesh; Avinash Malladi

AIP Conf. Proc. 2283, 020076 (2020) https://doi.org/10.1063/5.0025029

Abstract

View articletitled, Exploration of appropriateness of material for diaphragm spring of an automobile clutch – A numerical validation

Open the PDF for in another window

Experimental investigation of tensile strength and tensile modulus of fiber reinforced polyester by using chicken feather fiber

Raghuram Pradhan; K. Muralidharan; A. K. Saravanan; M. Raajasekar

AIP Conf. Proc. 2283, 020077 (2020) https://doi.org/10.1063/5.0025091

Abstract

View articletitled, Experimental investigation of tensile strength and tensile modulus of fiber reinforced polyester by using chicken feather fiber

Open the PDF for in another window

Study of storage modulus, lose modulus and abrasion on fiber reinforced polyester composites with locally available fiber of chicken feathers

K. Muralidharan; Raghuram Pradhan; A. Rajendra Prasad; D. Muruganandam

AIP Conf. Proc. 2283, 020078 (2020) https://doi.org/10.1063/5.0025080

Abstract

View articletitled, Study of storage modulus, lose modulus and abrasion on fiber reinforced polyester composites with locally available fiber of chicken feathers

Open the PDF for in another window

Study of flexural strength and flexural modulus on chicken feather fiber used fiber reinforced polyester composite

T. Naresh Kumar; K. Muralidharan; Raghuram Pradhan; M. Suresh

AIP Conf. Proc. 2283, 020079 (2020) https://doi.org/10.1063/5.0025083

Abstract

View articletitled, Study of flexural strength and flexural modulus on chicken feather fiber used fiber reinforced polyester composite

Open the PDF for in another window

Investigation on synthesize and characterizations hybrid composite with treated banana fibers

Raghuram Pradhan; K. Muralidharan; A. K. Saravanan; S. K. Dinesh Kumar

AIP Conf. Proc. 2283, 020080 (2020) https://doi.org/10.1063/5.0025094

Abstract

View articletitled, Investigation on synthesize and characterizations hybrid composite with treated banana fibers

Open the PDF for in another window

Effect of inter-facial coupled contact forces in the multilayered pacemaker lead cable

G. Raja; D. Chandramohan; B. K. Gnanavel; T. Sathish

AIP Conf. Proc. 2283, 020081 (2020) https://doi.org/10.1063/5.0024971

Abstract

View articletitled, Effect of inter-facial coupled contact forces in the multilayered pacemaker lead cable

Open the PDF for in another window

Experimental investigation on influence of chemical treatment for natural fibers in hybrid composite of G/SB/SB/SB/G

S. Karthick; S. Prasanna Raj Yadav; K. Senthilnathan; Raghuram Pradhan

AIP Conf. Proc. 2283, 020082 (2020) https://doi.org/10.1063/5.0025084

Abstract

View articletitled, Experimental investigation on influence of chemical treatment for natural fibers in hybrid composite of G/SB/SB/SB/G

Open the PDF for in another window

Experimental investigation on equally treated banana/sisal fibers based hybrid composite

T. Naresh Kumar; K. Muralidharan; Raghuram Pradhan; Ramya Suresh

AIP Conf. Proc. 2283, 020083 (2020) https://doi.org/10.1063/5.0025089

Abstract

View articletitled, Experimental investigation on equally treated banana/sisal fibers based hybrid composite

Open the PDF for in another window

Mechanical and thermal properties of jute/aloevera hybrid natural fiber reinforced composites

D. Chandramohan; T. Sathish; S. Dinesh Kumar; M. Sudhakar

AIP Conf. Proc. 2283, 020084 (2020) https://doi.org/10.1063/5.0024976

Abstract

View articletitled, Mechanical and thermal properties of jute/aloevera hybrid natural fiber reinforced composites

Open the PDF for in another window

Numerical analysis of cardiac lead due to internal cable motion

G. Raja; D. Chandramohan; B. K. Gnanavel; T. Sathish

AIP Conf. Proc. 2283, 020085 (2020) https://doi.org/10.1063/5.0024980

Abstract

View articletitled, Numerical analysis of cardiac lead due to internal cable motion

Open the PDF for in another window

Compressive response on Kevlar hybrid composite pipe under sea water environment

J. Lokeshkumar; N. Ramasamy; K. Mohamed Bak

AIP Conf. Proc. 2283, 020086 (2020) https://doi.org/10.1063/5.0025018

Abstract

View articletitled, Compressive response on Kevlar hybrid composite pipe under sea water environment

Open the PDF for in another window

Tungsten carbide particulate reinforced AA7050 aluminum alloy composites fabricated by liquid state processing

V. Mohanavel; S. Suresh Kumar; V. Sivaraman; V. K. Girish; M. Ravichandran

AIP Conf. Proc. 2283, 020087 (2020) https://doi.org/10.1063/5.0024939

Abstract

View articletitled, Tungsten carbide particulate reinforced AA7050 aluminum alloy composites fabricated by liquid state processing

Open the PDF for in another window

Physical, mechanical and wear performance of graphite (Gr) particles incorporated aluminium matrix composites – An overview

V. Mohanavel; S. Suresh Kumar; P. Ganeshan; R. Vishnukumar; P. Gurusamy

AIP Conf. Proc. 2283, 020088 (2020) https://doi.org/10.1063/5.0025354

Abstract

View articletitled, Physical, mechanical and wear performance of graphite (Gr) particles incorporated aluminium matrix composites – An overview

Open the PDF for in another window

Improving and standardization of industrial workers related to cognitive ergonomics

A. Suresh; B. R. Ramesh Bapu; S. Ragalakshmi; P. Prince Packiyaraj; S. Adharsh; A. Abul kalam azad

AIP Conf. Proc. 2283, 020089 (2020) https://doi.org/10.1063/5.0025513

Abstract

View articletitled, Improving and standardization of industrial workers related to cognitive ergonomics

Open the PDF for in another window

Influence of material density & model orientation on the mechanical strength & surface morphology of FDM based 3D printed specimens

Kishan Reddy Raghunath; N. Prashanth

AIP Conf. Proc. 2283, 020090 (2020) https://doi.org/10.1063/5.0026999

Abstract

View articletitled, Influence of material density & model orientation on the mechanical strength & surface morphology of FDM based 3D printed specimens

Open the PDF for in another window

Study of leakage flow in an axial LVAD with varying tip clearance

Sarath Sasidharan; Vikas Rajan

AIP Conf. Proc. 2283, 020091 (2020) https://doi.org/10.1063/5.0025412

Abstract

View articletitled, Study of leakage flow in an axial LVAD with varying tip clearance

Open the PDF for in another window

Study of shape effects in stenosis arteries using open foam

Arjun Suresh; Vikas Rajan

AIP Conf. Proc. 2283, 020092 (2020) https://doi.org/10.1063/5.0025413

Abstract

View articletitled, Study of shape effects in stenosis arteries using open foam

Open the PDF for in another window

Design and analysis of all terrain vehicle chassis using finite element analysis

L. Ravi Kumar; A. Vasanth Krishnan; K. Yashwant; B. Aravindan; R. Prabhakaran

AIP Conf. Proc. 2283, 020093 (2020) https://doi.org/10.1063/5.0025061

Abstract

View articletitled, Design and analysis of all terrain vehicle chassis using finite element analysis

Open the PDF for in another window

Design and fabrication of 3-D printed 6 DoF walking Bipedal robot with Arduino controller and analysis of gait pattern

Chennoju Manaswini; Abhishek Ranga

AIP Conf. Proc. 2283, 020094 (2020) https://doi.org/10.1063/5.0024876

Abstract

View articletitled, Design and fabrication of 3-D printed 6 DoF walking Bipedal robot with Arduino controller and analysis of gait pattern

Open the PDF for in another window

Designing of location-allocation planning in multi echelon single period closed loop supply chain network

S. Santhosh; P. Sakthivel; K. V. Siva Suriya; M. Vesvanth

AIP Conf. Proc. 2283, 020095 (2020) https://doi.org/10.1063/5.0025020

Abstract

View articletitled, Designing of location-allocation planning in multi echelon single period closed loop supply chain network

Open the PDF for in another window

Comprehensive analysis on mechanical behavior of airworthy raw materials for aircraft landing gear system

G. Vasanth; R. Deepack; S. Murali; S. Magesh

AIP Conf. Proc. 2283, 020096 (2020) https://doi.org/10.1063/5.0024956

Abstract

View articletitled, Comprehensive analysis on mechanical behavior of airworthy raw materials for aircraft landing gear system

Open the PDF for in another window

Recent development of automation and IoT in medical industries

Amith Kulkarni; P. Dhanush; B. S. Chethan; Thamme Gowda; Prashant Shrivastava

AIP Conf. Proc. 2283, 020097 (2020) https://doi.org/10.1063/5.0029263

Abstract

View articletitled, Recent development of automation and IoT in medical industries

Open the PDF for in another window

Tensile analysis of 3D printed thin cylinder at different percentage of infill’s

A. Suresh; V. Dhinakaran; K. Kalidasan; S. Surya; M. Varsha Shree

AIP Conf. Proc. 2283, 020098 (2020) https://doi.org/10.1063/5.0025516

Abstract

View articletitled, Tensile analysis of 3D printed thin cylinder at different percentage of infill’s

Open the PDF for in another window

Experimental investigations on compression ignition engine supplied with waste plastic oil propanol and di tetra butyl peroxide blends

S. Ravi; A. Karthikeyan

AIP Conf. Proc. 2283, 020099 (2020) https://doi.org/10.1063/5.0024903

Abstract

View articletitled, Experimental investigations on compression ignition engine supplied with waste plastic oil propanol and di tetra butyl peroxide blends

Open the PDF for in another window

Design and analysis of compliant microgripper – A review

Sudharsan Gunasekaran; Suresh Periyagounder; Saravanan Annamalai; Aravindha Balaji

AIP Conf. Proc. 2283, 020100 (2020) https://doi.org/10.1063/5.0024894

Abstract

View articletitled, Design and analysis of compliant microgripper – A review

Open the PDF for in another window

Numerical computation for contact stress analysis of spur gear

Anirudh Tallam; Pavan Kishore Mamaduri; Tarkeshwar Appala

AIP Conf. Proc. 2283, 020101 (2020) https://doi.org/10.1063/5.0026842

Abstract

View articletitled, Numerical computation for contact stress analysis of spur gear

Open the PDF for in another window

Effect of friction stir welding (FSW) process parameters on dissimilar aluminium alloys: An overview

P. Rajkumar; C. Ahilan

AIP Conf. Proc. 2283, 020102 (2020) https://doi.org/10.1063/5.0029176

Abstract

View articletitled, Effect of friction stir welding (FSW) process parameters on dissimilar aluminium alloys: An overview

Open the PDF for in another window

Designing an optimized model of water lifting device without conventional practices

R. Kishore; K. R. Yuwaraj; N. Vinoth; P. Kannan

AIP Conf. Proc. 2283, 020103 (2020) https://doi.org/10.1063/5.0025409

Abstract

View articletitled, Designing an optimized model of water lifting device without conventional practices

Open the PDF for in another window

Comparative analysis on mechanical behavior of coir fiber composite by varying the fiber length and composition of filler materials

R. Kishore; K. Karthikeyan; G. Karthick; S. Raja Rasalnath

AIP Conf. Proc. 2283, 020104 (2020) https://doi.org/10.1063/5.0025410

Abstract

View articletitled, Comparative analysis on mechanical behavior of coir fiber composite by varying the fiber length and composition of filler materials

Open the PDF for in another window

Design optimization and analysis of rear knuckle of ATV to reduce the manufacturing complexity and to improve strength

R. Kishore; S. Sivaraj; K. Karthikeyan; G. Kathick

AIP Conf. Proc. 2283, 020105 (2020) https://doi.org/10.1063/5.0025408

Abstract

View articletitled, Design optimization and analysis of rear knuckle of ATV to reduce the manufacturing complexity and to improve strength

Open the PDF for in another window

Experimental evaluation of affinity law of pumps by using multistage electric submersible pump at various speeds of operation

Arumugam Dhanasekaran; Sivasailam Kumaraswamy

AIP Conf. Proc. 2283, 020106 (2020) https://doi.org/10.1063/5.0024932

Abstract

View articletitled, Experimental evaluation of affinity law of pumps by using multistage electric submersible pump at various speeds of operation

Open the PDF for in another window

Experimental investigations of high efficiency smart solar tunnel dryer system

B. Krishna Kumar; J. Vishnupriyan; K. Chidambarathanu; K. R. Vasudevan

AIP Conf. Proc. 2283, 020107 (2020) https://doi.org/10.1063/5.0024997

Abstract

View articletitled, Experimental investigations of high efficiency smart solar tunnel dryer system

Open the PDF for in another window

Transient thermal finite element simulation of moving gas tungsten arc welding on AISI 4340 aeronautical steel

N. V. Dhandapani; V. Dhinakaran; K. Krishnakumar; V. Rajkumar

AIP Conf. Proc. 2283, 020108 (2020) https://doi.org/10.1063/5.0025111

Abstract

View articletitled, Transient thermal finite element simulation of moving gas tungsten arc welding on AISI 4340 aeronautical steel

Open the PDF for in another window

Performance evaluation of room coupled with solar chimney and underground cooling methods

V. Sriram; B. Kanimozhi; S. Prakash; R. B. Durairaj; G. Mageshwaran; Jeya Jeevahan; Kranthi Sathya

AIP Conf. Proc. 2283, 020109 (2020) https://doi.org/10.1063/5.0024906

Abstract

View articletitled, Performance evaluation of room coupled with solar chimney and underground cooling methods

Open the PDF for in another window

Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding

K. Eriki Ananda; R. Pugazhenthi; M. Chandrasekaran

AIP Conf. Proc. 2283, 020110 (2020) https://doi.org/10.1063/5.0024962

Abstract

View articletitled, Comparison in surface roughness of Ti6Al4v using CBN & bondless tool with the operations of turning and grinding

Open the PDF for in another window

The effect of sintering temperature on components prepared by Cu powder mixed with binder

Manu Ravuri; R. Pugazhenthi

AIP Conf. Proc. 2283, 020111 (2020) https://doi.org/10.1063/5.0024929

Abstract

View articletitled, The effect of sintering temperature on components prepared by Cu powder mixed with binder

Open the PDF for in another window

Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu

M. Vairavel; R. Pughazhenthi; R. Girimurugan; S. Vinothkumar; Poornachandiran N.

AIP Conf. Proc. 2283, 020112 (2020) https://doi.org/10.1063/5.0025005

Abstract

View articletitled, Effects of wear characterization analysis of the friction stir welded joints in aluminum alloy Al3116-Cu and A384 - Cu

Open the PDF for in another window

Investigation of mechanical properties of Al6061 with reinforcement of SiC/B₄C metal matrix composites

N. Poornachandiran; R. Pugazhenthi; S. Vijay Ananth; T. Gopala Krishnan; M. Vairavel

AIP Conf. Proc. 2283, 020113 (2020) https://doi.org/10.1063/5.0025004

Abstract

View articletitled, Investigation of mechanical properties of Al6061 with reinforcement of SiC/B4C metal matrix composites

Open the PDF for in another window

Soil stabilization using raw plastic bottle

P. R. Kalyana Chakravarthy; S. Banupriya; T. Ilango

AIP Conf. Proc. 2283, 020114 (2020) https://doi.org/10.1063/5.0025143

Abstract

View articletitled, Soil stabilization using raw plastic bottle

Open the PDF for in another window

CFD based shape optimization of axisymmetric cavitators in supercavitating flows

T. Gopala Krishnan; D. Lokesharun; R. Saravanan; N. Poornachandiran

AIP Conf. Proc. 2283, 020115 (2020) https://doi.org/10.1063/5.0025254

Abstract

View articletitled, CFD based shape optimization of axisymmetric cavitators in supercavitating flows

Open the PDF for in another window

Numerical analysis of single cylinder engine crankshaft

S. Ajith Arul Daniel; P. Shenbaga Velu; R. Kumar; S. Vijay Ananth

AIP Conf. Proc. 2283, 020116 (2020) https://doi.org/10.1063/5.0025394

Abstract

View articletitled, Numerical analysis of single cylinder engine crankshaft

Open the PDF for in another window

Optimization of machining parameters of Kevlar fibre reinforced composites

S. Vijay Ananth; A. Ramesh Udayakumar; Ajith Arul Daniel; N. Poornachandiran

AIP Conf. Proc. 2283, 020117 (2020) https://doi.org/10.1063/5.0025145

Abstract

View articletitled, Optimization of machining parameters of Kevlar fibre reinforced composites

Open the PDF for in another window

Experimental investigation on superplastic forming behavior of AA 6063/SiCp using stir casting

S. Vijay Ananth; R. Srimurugan; V. Jayaseelan; Arunvasantha Geethan; J. Francis Xavier

AIP Conf. Proc. 2283, 020118 (2020) https://doi.org/10.1063/5.0025150

Abstract

View articletitled, Experimental investigation on superplastic forming behavior of AA 6063/SiCp using stir casting

Open the PDF for in another window

Buckling analysis of 3D printed ABS thin cylinder at different percentage of infill’s

A. Suresh; R. Deepak Suresh Kumar; H. Mohamed Jaasim; B. Tamilarasan; N. Mugilvarnan; A. Vignesh

AIP Conf. Proc. 2283, 020119 (2020) https://doi.org/10.1063/5.0025512

Abstract

View articletitled, Buckling analysis of 3D printed ABS thin cylinder at different percentage of infill’s

Open the PDF for in another window

Performance improvement in compact single cylinder IC engines for fuel efficient racing application

G. K. Kannan; S. Nagendharan; S. Krishnamoorthi

AIP Conf. Proc. 2283, 020120 (2020) https://doi.org/10.1063/5.0028764

Abstract

View articletitled, Performance improvement in compact single cylinder IC engines for fuel efficient racing application

Open the PDF for in another window

Design and performance analysis of curved fins with convex inner flow surface

D. Dinesh; S. Nagendharan; R. Diwakar Raviram

AIP Conf. Proc. 2283, 020121 (2020) https://doi.org/10.1063/5.0025508

Abstract

View articletitled, Design and performance analysis of curved fins with convex inner flow surface

Open the PDF for in another window

Experimental study about flash and fire point comparison on three combinations of waste tyre oil with diesel for alternate fuel properties identification

T. Sathish; D. Bala Subramanian; R. Saravanan; V. Dhinakaran

AIP Conf. Proc. 2283, 020122 (2020) https://doi.org/10.1063/5.0024958

Abstract

View articletitled, Experimental study about flash and fire point comparison on three combinations of waste tyre oil with diesel for alternate fuel properties identification

Open the PDF for in another window

Investigation on waste tyre oil with diesel for detection of density, kinematic and dynamic viscosities evaluation of various combinations in volume basis

T. Sathish; K. Muthukumar; R. Saravanan; V. Dhinakaran

AIP Conf. Proc. 2283, 020123 (2020) https://doi.org/10.1063/5.0024963

Abstract

View articletitled, Investigation on waste tyre oil with diesel for detection of density, kinematic and dynamic viscosities evaluation of various combinations in volume basis

Open the PDF for in another window

Experimental investigation on material characterization of zirconia reinforced Alumina ceramic composites via powder forming process

T. Sathish; S. Arunkumar; R. Saravanan; V. Dhinakaran

AIP Conf. Proc. 2283, 020124 (2020) https://doi.org/10.1063/5.0024964

Abstract

View articletitled, Experimental investigation on material characterization of zirconia reinforced Alumina ceramic composites via powder forming process

Open the PDF for in another window

Experimental investigation of temperature variation on flat plate collector by using silicon carbide as a nanofluid

T. Sathish; D. Bala Subramanian; R. Saravanan; V. Dhinakaran

AIP Conf. Proc. 2283, 020125 (2020) https://doi.org/10.1063/5.0024965

Abstract

View articletitled, Experimental investigation of temperature variation on flat plate collector by using silicon carbide as a nanofluid

Open the PDF for in another window

Study on temperature difference of aluminium nitride nanofluid used in solar flat plate collector over normal water

T. Sathish; K. Muthukumar; R. Saravanan; V. Dhinakaran

AIP Conf. Proc. 2283, 020126 (2020) https://doi.org/10.1063/5.0024966

Abstract

View articletitled, Study on temperature difference of aluminium nitride nanofluid used in solar flat plate collector over normal water

Open the PDF for in another window

Experimental and analytical testing of a composite laminate material G10/FR4 under cyclic loading

M. S. Heaven Dani; G. M. Pradeep; K. Balamanikandasuthan; K. Kalaiselvan; D. Athikesavan

AIP Conf. Proc. 2283, 020127 (2020) https://doi.org/10.1063/5.0024916

Abstract

View articletitled, Experimental and analytical testing of a composite laminate material G10/FR4 under cyclic loading

Open the PDF for in another window

Analysis of natural fibre mat and fibre hybrid composites

K. Balasubramanian; N. Rajeswari; M. Risheek Shankar

AIP Conf. Proc. 2283, 020128 (2020) https://doi.org/10.1063/5.0025500

Abstract

View articletitled, Analysis of natural fibre mat and fibre hybrid composites

Open the PDF for in another window

Influence of different reinforcements on properties of copper matrix composites: A review

M. Melwin Jagadeesh Sridhar; M. Ravichandran; M. Meignanamoorthy

AIP Conf. Proc. 2283, 020129 (2020) https://doi.org/10.1063/5.0029257

Abstract

View articletitled, Influence of different reinforcements on properties of copper matrix composites: A review

Open the PDF for in another window

Wheelchair cum stretcher for patients - Design and fabrication

P. C. Santhosh Kumar; K. Murugesan; M. Ravichandran; J. Manivasagan; K. Maharaja; H. Jegadeeshwaran

AIP Conf. Proc. 2283, 020130 (2020) https://doi.org/10.1063/5.0025031

Abstract

View articletitled, Wheelchair cum stretcher for patients - Design and fabrication

Open the PDF for in another window

Performance, emission analysis and optimization of biodiesel blend with CuO nano particle additive in DI diesel engine

M. Manimaran; G. Sakthi Balan; M. Ravichandran; V. Mohanavel; V. Dhinakaran

AIP Conf. Proc. 2283, 020131 (2020) https://doi.org/10.1063/5.0024978

Abstract

View articletitled, Performance, emission analysis and optimization of biodiesel blend with CuO nano particle additive in DI diesel engine

Open the PDF for in another window

Development of multiple cutting power hacksaw

N. Karthikeyan; P. C. Santhosh Kumar; B. Prakash; M. Ravichandran

AIP Conf. Proc. 2283, 020132 (2020) https://doi.org/10.1063/5.0025070

Abstract

View articletitled, Development of multiple cutting power hacksaw

Open the PDF for in another window

Design and analysis of chain strip in roller conveyor under tensile load

K. Arun Vasantha Geethan; J. Francis Xavier; R. Srimurugan; S. Vijay Ananth; V. Jayaseelan

AIP Conf. Proc. 2283, 020133 (2020) https://doi.org/10.1063/5.0025154

Abstract

View articletitled, Design and analysis of chain strip in roller conveyor under tensile load

Open the PDF for in another window

Enhanced ergonomic design of driver seat

N. Janaki Manohar; N. Muthu Krishnan; A. Rahul Kumar

AIP Conf. Proc. 2283, 020134 (2020) https://doi.org/10.1063/5.0026898

Abstract

View articletitled, Enhanced ergonomic design of driver seat

Open the PDF for in another window

Review on nanofluid role & design aspects to enhance the thermal performance of the parabolic trough collector

R. Naveenkumar; P. C. Santhosh Kumar; M. Dinesh Kumar; M. Ravichandran

AIP Conf. Proc. 2283, 020135 (2020) https://doi.org/10.1063/5.0025046

Abstract

View articletitled, Review on nanofluid role & design aspects to enhance the thermal performance of the parabolic trough collector

Open the PDF for in another window

Mechanical, microstructural evaluation and optimisation of laser welded AISI 316l and incoloy 825 (UNS SO8825) alloy

H. Ramakrishnan; G. Sakthi Balan; V. Santhosh Kumar; M. Ravichandran

AIP Conf. Proc. 2283, 020136 (2020) https://doi.org/10.1063/5.0024937

Abstract

View articletitled, Mechanical, microstructural evaluation and optimisation of laser welded AISI 316l and incoloy 825 (UNS SO8825) alloy

Open the PDF for in another window

Experimental investigation of condensate water collector in exhaust system of an automobiles

R. Sanjeevi; R. Giridharan; N. Ganesh; B. Ashok; S. Vasandan

AIP Conf. Proc. 2283, 020137 (2020) https://doi.org/10.1063/5.0025085

Abstract

View articletitled, Experimental investigation of condensate water collector in exhaust system of an automobiles

Open the PDF for in another window

Analysis of geofabrics in highway pavement materials

P. Partheeban; E. Palani Kumar; Y. J. Breetha; Mohamed Bazeem

AIP Conf. Proc. 2283, 020138 (2020) https://doi.org/10.1063/5.0025155

Abstract

View articletitled, Analysis of geofabrics in highway pavement materials

Open the PDF for in another window

Evaluating strength aspects of cement mortar by using mineral admixture and nano particles

P. Vasanthi; S. Senthil Selvan

AIP Conf. Proc. 2283, 020139 (2020) https://doi.org/10.1063/5.0025021

Abstract

View articletitled, Evaluating strength aspects of cement mortar by using mineral admixture and nano particles

Open the PDF for in another window

Material synthesis, characterization and machining performance of terbium metal matrix composite

T. Vishnu Vardhan; B. Stalin; S. Marichamy; M. Ravichandran; J. Vairamuthu; V. Dhinakaran

AIP Conf. Proc. 2283, 020140 (2020) https://doi.org/10.1063/5.0024969

Abstract

View articletitled, Material synthesis, characterization and machining performance of terbium metal matrix composite

Open the PDF for in another window

Friction welding parametric optimization of AISI 310L austenitic stainless steel weld joints - Grey relational investigation

B. Stalin; M. Ravichandran; S. Marichamy; T. D. Choumya Devi; S. V. Alagarsamy; V. Dhinakaran

AIP Conf. Proc. 2283, 020141 (2020) https://doi.org/10.1063/5.0024979

Abstract

View articletitled, Friction welding parametric optimization of AISI 310L austenitic stainless steel weld joints - Grey relational investigation

Open the PDF for in another window

Issues

Cover Image

PRELIMINARY

ARTICLES

RSS

Resources