Skip Nav Destination
Issues
PRELIMINARY
Preface: 2nd International Conference on Mechanical Materials and Renewable Energy (ICMMRE 2019)
AIP Conf. Proc. 2273, 010001 (2020)
https://doi.org/10.1063/12.0001087
ENERGY
Design modifications and performance of biomass cookstoves-A review
AIP Conf. Proc. 2273, 020002 (2020)
https://doi.org/10.1063/5.0024260
Techno-economic analysis of biomass-fuelled indirectly-heated combined cogeneration plant for power and cooling
AIP Conf. Proc. 2273, 020003 (2020)
https://doi.org/10.1063/5.0024442
Energy conservation strategies in residential building – A case study
AIP Conf. Proc. 2273, 020004 (2020)
https://doi.org/10.1063/5.0024301
Effect of different solvents and solvent to Euglena sanguinea biomass ratios on total lipid productivity
AIP Conf. Proc. 2273, 020006 (2020)
https://doi.org/10.1063/5.0024232
Production of biodiesel from Livistona jenkinsiana Griff
AIP Conf. Proc. 2273, 020007 (2020)
https://doi.org/10.1063/5.0024465
Direct DC use of PV for cooking and sanitary
AIP Conf. Proc. 2273, 020008 (2020)
https://doi.org/10.1063/5.0026498
Performance enhancement of a biomass-fuelled GT based integrated power and cooling plant by inlet air cooling
AIP Conf. Proc. 2273, 020009 (2020)
https://doi.org/10.1063/5.0024426
CO2 emission reduction potential of a typical Indian village
AIP Conf. Proc. 2273, 020010 (2020)
https://doi.org/10.1063/5.0024548
A review on modelling and performance evaluation of solar photovoltaic powered refrigeration system
AIP Conf. Proc. 2273, 020012 (2020)
https://doi.org/10.1063/5.0024290
Study and analysis of non-conventional energy sources for an Eastern State of India
AIP Conf. Proc. 2273, 020014 (2020)
https://doi.org/10.1063/5.0024238
MATERIAL SCIENCE
Effect of substrates & deposition temperatures on structural and magnetic properties of Co2MnSi deposited by PLD
AIP Conf. Proc. 2273, 030001 (2020)
https://doi.org/10.1063/5.0024309
Characterization of acid-activated sodium bentonite clay: A potential catalyst for recycling plastic wastes
AIP Conf. Proc. 2273, 030002 (2020)
https://doi.org/10.1063/5.0024321
Material characterization of resistance spot welded aluminium alloy 5052 and stainless steel 316L joints
AIP Conf. Proc. 2273, 030003 (2020)
https://doi.org/10.1063/5.0024249
Characterization of friction stir spot welded copper-PPMA joint interface
AIP Conf. Proc. 2273, 030004 (2020)
https://doi.org/10.1063/5.0024490
Tribological performance of high density polyethylene – Hydroxyapatite blends
AIP Conf. Proc. 2273, 030005 (2020)
https://doi.org/10.1063/5.0024368
Fabrication characterization and machining of micro hybrid Al6061 aluminium composite
AIP Conf. Proc. 2273, 030006 (2020)
https://doi.org/10.1063/5.0024296
Applications of Lattice Boltzmann in method in multi-component and multi-phase flow: A review
AIP Conf. Proc. 2273, 030007 (2020)
https://doi.org/10.1063/5.0024322
Parametric analysis of waverider in hypersonic flow
AIP Conf. Proc. 2273, 030008 (2020)
https://doi.org/10.1063/5.0024230
Phyto-mediated synthesis of Ag-Au bimetallic ZnO photocatalyst
AIP Conf. Proc. 2273, 030009 (2020)
https://doi.org/10.1063/5.0024757
Effect of different types of fibers on workability and compressive strength of self compacting concrete
AIP Conf. Proc. 2273, 030010 (2020)
https://doi.org/10.1063/5.0024470
NANOTECHNOLOGY
Synthesis of Zirconium di-oxide powder from micro size to nano-size using high energy ball mill
AIP Conf. Proc. 2273, 040003 (2020)
https://doi.org/10.1063/5.0024420
Investigation of electronic properties of phosphorus doped zigzag graphene nanoribbons for nano applications
AIP Conf. Proc. 2273, 040004 (2020)
https://doi.org/10.1063/5.0024286
Study of photocatalytic properties of Ni doped Sodium Hexa-titanate(Na2Ti6O13)
AIP Conf. Proc. 2273, 040005 (2020)
https://doi.org/10.1063/5.0024505
Effect of zinc precursor on morphology of ZnO nanoparticles
AIP Conf. Proc. 2273, 040006 (2020)
https://doi.org/10.1063/5.0024934
A review on various techniques implemented for the synthesis of SiliconCarbo-Nitride (SiCN) coatings
AIP Conf. Proc. 2273, 040007 (2020)
https://doi.org/10.1063/5.0024469
Finding the suitability of reduced graphene oxide and lithium based compounds for flexible battery application
AIP Conf. Proc. 2273, 040008 (2020)
https://doi.org/10.1063/5.0024621
Multi-attribute optimization of diamond-like carbon thin films
AIP Conf. Proc. 2273, 040010 (2020)
https://doi.org/10.1063/5.0024626
ENGINEERING
A critical review on surface quality and chip forms during turning aluminium matrix composites
AIP Conf. Proc. 2273, 050002 (2020)
https://doi.org/10.1063/5.0024254
Low parasitic capacitance gate driver with desaturation protection
AIP Conf. Proc. 2273, 050003 (2020)
https://doi.org/10.1063/5.0026497
Comparison of mixing efficiency of different impellers for agitation of slurry in anaerobic digester
AIP Conf. Proc. 2273, 050004 (2020)
https://doi.org/10.1063/5.0024243
Machinability study of plain carbon steels using data mining technique
AIP Conf. Proc. 2273, 050005 (2020)
https://doi.org/10.1063/5.0024334
Numerical investigation of hydrodynamics of the cavitating turbulent flow in a low head prototype francis turbine
AIP Conf. Proc. 2273, 050006 (2020)
https://doi.org/10.1063/5.0024540
Second law analysis of an integrated parabolic trough photovoltaic thermal system
AIP Conf. Proc. 2273, 050008 (2020)
https://doi.org/10.1063/5.0025117
A concise review on improvement of tribological properties by electrical discharge coating process
AIP Conf. Proc. 2273, 050009 (2020)
https://doi.org/10.1063/5.0024299
Optimization of electrochemical machining process parameters using teaching-learning-based algorithm
AIP Conf. Proc. 2273, 050010 (2020)
https://doi.org/10.1063/5.0024474
Risk identification and evaluation of ERP implementation to ensure the success of KM
AIP Conf. Proc. 2273, 050011 (2020)
https://doi.org/10.1063/5.0024300
Limit elastic speed analysis of L-FGM rotating disk using Halpin-Tsai and MROM
AIP Conf. Proc. 2273, 050013 (2020)
https://doi.org/10.1063/5.0024231
Influence of mild alkali treatment on abaca fibre
AIP Conf. Proc. 2273, 050014 (2020)
https://doi.org/10.1063/5.0024346
Application of multivariate loss function and distance function approaches for materials selection
AIP Conf. Proc. 2273, 050015 (2020)
https://doi.org/10.1063/5.0024554
Analysis on surface roughness of Al-Mg alloy in single point incremental forming (SPIF)
AIP Conf. Proc. 2273, 050016 (2020)
https://doi.org/10.1063/5.0024552
Simulation of edge cracked 3D functionally graded domain using XFEM
AIP Conf. Proc. 2273, 050017 (2020)
https://doi.org/10.1063/5.0024379
Supplier selection using multi-objective optimization based on ratio analysis
AIP Conf. Proc. 2273, 050018 (2020)
https://doi.org/10.1063/5.0024464
Energy performance, S/P ratio and psychological analysis of light sources: Road lighting
AIP Conf. Proc. 2273, 050019 (2020)
https://doi.org/10.1063/5.0024518
Microstructure and mechanical characterization of laser welded dissimilar joint of DSS 2205 and inconel 625 sheets
AIP Conf. Proc. 2273, 050020 (2020)
https://doi.org/10.1063/5.0024251
Essential mechanical properties of work roll for effective rolling using 20 Hi-cold rolling mill
AIP Conf. Proc. 2273, 050021 (2020)
https://doi.org/10.1063/5.0024295
Study of installations of hydrokinetic turbines and their environmental effects
AIP Conf. Proc. 2273, 050022 (2020)
https://doi.org/10.1063/5.0024338
Effect of additive on erosion behaviour of slurry pumps material
AIP Conf. Proc. 2273, 050024 (2020)
https://doi.org/10.1063/5.0024349
Effect of geometry of dropped-off edges on the impact response of woven composite laminate with ply drops
AIP Conf. Proc. 2273, 050026 (2020)
https://doi.org/10.1063/5.0024521
Effect of surface hardness on the slurry erosion wear of AISI420 stainless steel
AIP Conf. Proc. 2273, 050027 (2020)
https://doi.org/10.1063/5.0024812
Effects of acoustically generated pulsed hydro jet during rock surface disintegration
AIP Conf. Proc. 2273, 050028 (2020)
https://doi.org/10.1063/5.0025991
Effect of blade profile on performance of Squirrel Cage Darrius turbine
AIP Conf. Proc. 2273, 050029 (2020)
https://doi.org/10.1063/5.0024712
Investigation of defect formation during friction stir welding of aluminum alloys
AIP Conf. Proc. 2273, 050030 (2020)
https://doi.org/10.1063/5.0024507
Revisiting the rolling process and its future research potentials
AIP Conf. Proc. 2273, 050031 (2020)
https://doi.org/10.1063/5.0024553
A study on dynamic response of exterior RC beam-column joint
AIP Conf. Proc. 2273, 050035 (2020)
https://doi.org/10.1063/5.0024483
Retractable side stands for avoiding the accidents caused due to un-retracted side stand
AIP Conf. Proc. 2273, 050037 (2020)
https://doi.org/10.1063/5.0024438
Significance of aspect ratio of wear debris in condition monitoring
AIP Conf. Proc. 2273, 050039 (2020)
https://doi.org/10.1063/5.0025347
Optimization of flanges for diffuser casings of diffuser augmented wind turbines
AIP Conf. Proc. 2273, 050040 (2020)
https://doi.org/10.1063/5.0024504
Advancements in reverse osmosis technology and economic prospects of desalination
AIP Conf. Proc. 2273, 050041 (2020)
https://doi.org/10.1063/5.0024473
Comparative study of simple and impinging jet solar air heater using CFD analysis
AIP Conf. Proc. 2273, 050043 (2020)
https://doi.org/10.1063/5.0024241
Drudgery assessment of farmers tool in paddy harvesting
AIP Conf. Proc. 2273, 050047 (2020)
https://doi.org/10.1063/5.0024557
Achieving by sustainable supply chain management in thermal power plants
AIP Conf. Proc. 2273, 050048 (2020)
https://doi.org/10.1063/5.0024415
Analysis of aluminium metal matrix composite piston for automobile applications
AIP Conf. Proc. 2273, 050049 (2020)
https://doi.org/10.1063/5.0024235
Modeling for analysis of antisymmetric angle ply laminated composite plates
AIP Conf. Proc. 2273, 050051 (2020)
https://doi.org/10.1063/5.0024988
Application of MOORA method to analyze the factors affecting success of social programs
AIP Conf. Proc. 2273, 050058 (2020)
https://doi.org/10.1063/5.0024343
Static shape control of smart functionally graded beams using an efficient finite element model
AIP Conf. Proc. 2273, 050059 (2020)
https://doi.org/10.1063/5.0024436
Effect of additive concentration and temperature on the surface tension of water
AIP Conf. Proc. 2273, 050060 (2020)
https://doi.org/10.1063/5.0024538
A brief review on performance enhancement of solar air heater using protrusion/dimple
AIP Conf. Proc. 2273, 050062 (2020)
https://doi.org/10.1063/5.0024520
Facile synthesis of Ti-W-O mixed oxide photoanode for photoelectrochemical solar water oxidation
AIP Conf. Proc. 2273, 050063 (2020)
https://doi.org/10.1063/5.0024758
Variation of viscosity of organic additives for enhancement of heat transfer
AIP Conf. Proc. 2273, 050064 (2020)
https://doi.org/10.1063/5.0024602
Day ahead demand side management using firefly algorithm
AIP Conf. Proc. 2273, 050068 (2020)
https://doi.org/10.1063/5.0024786
Numerical analysis on enhancement of recirculation in porous medium to improve heat transfer rate
AIP Conf. Proc. 2273, 050069 (2020)
https://doi.org/10.1063/5.0026572
Enhancement of finned tube type heat exchanger using organic additives
AIP Conf. Proc. 2273, 050070 (2020)
https://doi.org/10.1063/5.0024492
TOPSIS based selection of optimal end milling process parameters
AIP Conf. Proc. 2273, 050071 (2020)
https://doi.org/10.1063/5.0024275
Supplier selection using multi-criteria decision making technique
AIP Conf. Proc. 2273, 050072 (2020)
https://doi.org/10.1063/5.0024337
Multi-criteria optimization of turning process
AIP Conf. Proc. 2273, 050073 (2020)
https://doi.org/10.1063/5.0024327
A review on MQL for the machining of titanium based alloy
AIP Conf. Proc. 2273, 050074 (2020)
https://doi.org/10.1063/5.0024497
A parametric experimental study on laser beam micro-grooving of Bakelite sheet
AIP Conf. Proc. 2273, 050076 (2020)
https://doi.org/10.1063/5.0024845
INDUSTRY
Identification and categorization of lean manufacturing barriers in Indian SMEs
AIP Conf. Proc. 2273, 060001 (2020)
https://doi.org/10.1063/5.0024294
Thermal comfort assessment of a pantry car coaches in Indian railway
AIP Conf. Proc. 2273, 060002 (2020)
https://doi.org/10.1063/5.0024528
‘Swadeshi Mantra’ as trend-changer in FMCG retail - A case review of Patanjali Ayurved
AIP Conf. Proc. 2273, 060003 (2020)
https://doi.org/10.1063/5.0024333
Assessing volatility in returns : An Indian stock market perspective
AIP Conf. Proc. 2273, 060004 (2020)
https://doi.org/10.1063/5.0024335
An empirical note on contribution of industries to skill development mission
AIP Conf. Proc. 2273, 060006 (2020)
https://doi.org/10.1063/5.0024525
An exploratory analysis of factors affecting HR aspects in high altitude illness attrition
AIP Conf. Proc. 2273, 060007 (2020)
https://doi.org/10.1063/5.0024524
A study of the inadequacies in skill programme for industrial development in Sikkim
AIP Conf. Proc. 2273, 060008 (2020)
https://doi.org/10.1063/5.0024523
An empirical note on tourists perception on energy consciousness and use of renewable energy in Sikkim homestays
AIP Conf. Proc. 2273, 060009 (2020)
https://doi.org/10.1063/5.0024522
An integrated SWARA-WSM model for analyzing performance of Indian banks
AIP Conf. Proc. 2273, 060010 (2020)
https://doi.org/10.1063/5.0024340
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Social mediated crisis communication model: A solution for social media crisis?
S. N. A. Hamid, N. Ahmad, et al.
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.