Skip Nav Destination
Issues
PRELIMINARY
Preface: 3rd International Postgraduate Conference on Materials, Minerals & Polymer (MAMIP) 2019
AIP Conf. Proc. 2267, 010001 (2020)
https://doi.org/10.1063/12.0000698
ARTICLES
Lignin-assisted carbon nanotube dispersion for conductive ink application
AIP Conf. Proc. 2267, 020003 (2020)
https://doi.org/10.1063/5.0015718
Characterization of stainless steel mesh as a current collector in the supercapacitor application
AIP Conf. Proc. 2267, 020005 (2020)
https://doi.org/10.1063/5.0015790
Potential recycling of metallurgical slag waste into geopolymer products: A brief review
Siti Koriah Zakaria; Nurulakmal Mohd Sharif; Anasyida Abu Seman; Julie Juliewatty Mohamed; Mahani Yusoff; Abdul Hafidz Yusoff; Nadiah Ameram; Pao Ter Teo
AIP Conf. Proc. 2267, 020008 (2020)
https://doi.org/10.1063/5.0015752
Heavy metal ions removal using β-MnO2 particles under UV irradiation
AIP Conf. Proc. 2267, 020009 (2020)
https://doi.org/10.1063/5.0018266
Effect of annealing temperature on the performance of ZnO thin film-based dye sensitized solar cell
AIP Conf. Proc. 2267, 020010 (2020)
https://doi.org/10.1063/5.0015699
Grafting copolymer cylic natural rubber with oleic acid using dicumyl peroxide as initiator
AIP Conf. Proc. 2267, 020013 (2020)
https://doi.org/10.1063/5.0025153
How green are our waterproofing materials? towards practicing sustainable building defects
AIP Conf. Proc. 2267, 020016 (2020)
https://doi.org/10.1063/5.0016166
Fabrication of bioactive glass-cordierite composite scaffold by gelcasting method
AIP Conf. Proc. 2267, 020018 (2020)
https://doi.org/10.1063/5.0015707
Effect of magnesium to the properties of sintered biphasic calcium phosphate (BCP) for bone regeneration
AIP Conf. Proc. 2267, 020019 (2020)
https://doi.org/10.1063/5.0015692
Effect of strontium pretreatment on magnesium alloy evaluated by immersion test
AIP Conf. Proc. 2267, 020020 (2020)
https://doi.org/10.1063/5.0016143
Characteristics of maleic anhydrida-modified polystyrene containing sand aggregate
AIP Conf. Proc. 2267, 020022 (2020)
https://doi.org/10.1063/5.0015713
Room temperature self-healing natural rubber based on ionic supramolecular network
AIP Conf. Proc. 2267, 020023 (2020)
https://doi.org/10.1063/5.0016183
Application of natural coagulants for sustainable treatment of semi-aerobic landfill leachate
AIP Conf. Proc. 2267, 020024 (2020)
https://doi.org/10.1063/5.0017406
Efficiency of maleic anhydride-modified polystyrene/natural rubber blends as sand aggregate binder
AIP Conf. Proc. 2267, 020025 (2020)
https://doi.org/10.1063/5.0015717
Modification of natural rubber (SIR 10) with maleic anhydride as binder for sand aggregate
AIP Conf. Proc. 2267, 020027 (2020)
https://doi.org/10.1063/5.0015722
The influence of extraction method to the properties of α-cellulose from abaca stem (Musa textillis)
AIP Conf. Proc. 2267, 020028 (2020)
https://doi.org/10.1063/5.0015729
Graphene/polyaniline nanocomposites: Effect of surfactant and fabrication methods
AIP Conf. Proc. 2267, 020029 (2020)
https://doi.org/10.1063/5.0015751
The effect of crosslinking agent on protein-based bioplastic from fish waste
AIP Conf. Proc. 2267, 020030 (2020)
https://doi.org/10.1063/5.0016189
Flexibility and sensitivity of graphene nanoplatelets-polydimethylsiloxane strain sensor
AIP Conf. Proc. 2267, 020033 (2020)
https://doi.org/10.1063/5.0015765
Electrical conductivity of silver conductive ink synthesized using chemical reduction method
AIP Conf. Proc. 2267, 020034 (2020)
https://doi.org/10.1063/5.0015708
Influence of La2O3 additions on the microstructure and strength of zirconia toughened alumina
AIP Conf. Proc. 2267, 020035 (2020)
https://doi.org/10.1063/5.0015691
The production of nanocrystalline cellulose from oil palm fruit fibers using chemical treatment
AIP Conf. Proc. 2267, 020036 (2020)
https://doi.org/10.1063/5.0015667
Effect of blowing agent on compression and morphological properties of natural rubber latex foam
AIP Conf. Proc. 2267, 020037 (2020)
https://doi.org/10.1063/5.0016385
Characteristics of CNC reinforced cassava starch biocomposites activated with holy basil extract
AIP Conf. Proc. 2267, 020038 (2020)
https://doi.org/10.1063/5.0015669
The effect of degree of oxidation on protein recovery in stickwater using magnetized cellulose nanocrystals
AIP Conf. Proc. 2267, 020039 (2020)
https://doi.org/10.1063/5.0016190
Fabrication and characterization of 45S5 bioactive glass microspheres
AIP Conf. Proc. 2267, 020041 (2020)
https://doi.org/10.1063/5.0015700
The effect of pre-roasting on nickel extraction from limonite ore by acid leaching method
AIP Conf. Proc. 2267, 020042 (2020)
https://doi.org/10.1063/5.0015935
Dispersion and stability of multiwalled carbon nanotubes (MWCNTs) in different solvents
AIP Conf. Proc. 2267, 020043 (2020)
https://doi.org/10.1063/5.0024711
Direct transformation of Bangka kaolin to zeolite 4A: Effect of hydrothermal temperature
AIP Conf. Proc. 2267, 020044 (2020)
https://doi.org/10.1063/5.0015933
Fabrication and characterization of silver nanoparticles/PVA composites for flexible electronic application
AIP Conf. Proc. 2267, 020046 (2020)
https://doi.org/10.1063/5.0016135
Properties of conductive PANI fabricated using different dopant acids and molar ratios
AIP Conf. Proc. 2267, 020048 (2020)
https://doi.org/10.1063/5.0015755
The effect of glutaraldehyde on the properties of Chi-Pec-PVA membrane
AIP Conf. Proc. 2267, 020049 (2020)
https://doi.org/10.1063/5.0016521
Influence of homogenization time to the physical properties of durian peel’s pulp from North Sumatera Indonesia
AIP Conf. Proc. 2267, 020051 (2020)
https://doi.org/10.1063/5.0017423
Synchrotron radiation study of impregnated activated carbon used in protective equipment for chemical warfare
AIP Conf. Proc. 2267, 020052 (2020)
https://doi.org/10.1063/5.0016530
The effect of filler content on the properties of zeolite particle reinforced unsaturated polyester composites
AIP Conf. Proc. 2267, 020053 (2020)
https://doi.org/10.1063/5.0015675
Polymer of chitosan with ZnO addition to optimize high responsivity and sensitivity in sensor film
AIP Conf. Proc. 2267, 020054 (2020)
https://doi.org/10.1063/5.0016439
Effect of strontium doping on bone nodule formation of sol-gel derived bioglass
AIP Conf. Proc. 2267, 020058 (2020)
https://doi.org/10.1063/5.0015714
Development of bioactive glass-poly-Ɛ-caprolactone polymer composite film for soft tissue regeneration
AIP Conf. Proc. 2267, 020059 (2020)
https://doi.org/10.1063/5.0015785
Distribution, enrichment, and source of heavy metals in stream sediments from Sg. Koyan District, Pahang, Malaysia
AIP Conf. Proc. 2267, 020060 (2020)
https://doi.org/10.1063/5.0023794
Microstructural changes and elemental analysis of fake braces in simulated body fluid
AIP Conf. Proc. 2267, 020061 (2020)
https://doi.org/10.1063/5.0015754
Properties of unmodified and modified natural rubber/halloysite nanotubes composites
AIP Conf. Proc. 2267, 020063 (2020)
https://doi.org/10.1063/5.0016132
Influence of aging temperature on the crystal structure of 54S4P gel glass via sol-gel route
AIP Conf. Proc. 2267, 020064 (2020)
https://doi.org/10.1063/5.0015726
Preparation of silver nanoparticles from extract of star anise (Illicium verum. Hook. F)
AIP Conf. Proc. 2267, 020065 (2020)
https://doi.org/10.1063/5.0017822
Stability and thermal conductivity of graphene in polyester nanolubricant
AIP Conf. Proc. 2267, 020066 (2020)
https://doi.org/10.1063/5.0015740
Injectable hydrogel scaffold from natural biomaterials - An overview of recent studies
AIP Conf. Proc. 2267, 020068 (2020)
https://doi.org/10.1063/5.0015786
Parametric optimization of friction stir welding of dissimilar Al 5083 and Al 6061 alloys by using Taguchi method
Muhamad Nabil Faizul Hilmy; Syazfiqa Farina Muzammil; Zuhailawati Hussain; Abioye Taiwo Ebenezer; Anasyida Abu Seman
AIP Conf. Proc. 2267, 020071 (2020)
https://doi.org/10.1063/5.0015725
Influence of bed temperature on warpage, shrinkage and density of various acrylonitrile butadiene styrene (ABS) parts from fused deposition modelling (FDM)
Amirah Azwani Rosli; Raa Khimi Shuib; Ku Marsilla Ku Ishak; Zuratul Ain Abdul Hamid; Muhammad Khalil Abdullah; Arjulizan Rusli
AIP Conf. Proc. 2267, 020072 (2020)
https://doi.org/10.1063/5.0015799
Coagulation performance of titanium tetrachloride for Alor Pongsu wastewater treatment
AIP Conf. Proc. 2267, 020073 (2020)
https://doi.org/10.1063/5.0016162
Effect of friction stir welding parameters on mechanical properties of as received and cryorolled Al 5083 alloy
Muhamad Nabil Faizul Hilmy; Muhammad Danial Mohd Talha; Zuhailawati Hussain; Abioye Taiwo Ebenezer; Anasyida Abu Seman
AIP Conf. Proc. 2267, 020074 (2020)
https://doi.org/10.1063/5.0015780
The main carbonates mineral associated with quartz Veins in Penjom Gold Deposit, Pahang, Malaysia
AIP Conf. Proc. 2267, 020076 (2020)
https://doi.org/10.1063/5.0015854
Shelf life prediction of sago starch filled natural rubber latex gloves by using average activation energy approach
AIP Conf. Proc. 2267, 020077 (2020)
https://doi.org/10.1063/5.0016154
Utilization of natural rubber latex as raw materials for rubber shoe outsole
AIP Conf. Proc. 2267, 020078 (2020)
https://doi.org/10.1063/5.0016152
The effects of nano-cellulose filler on tensile and thermal properties of natural rubber latex films
AIP Conf. Proc. 2267, 020079 (2020)
https://doi.org/10.1063/5.0016167
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.