Skip Nav Destination
Issues
PRELIMINARY
Preface: Proceedings of the 35th International Conference of the Polymer Processing Society (PPS-35)
AIP Conf. Proc. 2205, 010001 (2020)
https://doi.org/10.1063/1.5142915
ARTICLES
Ageing behavior of thermally joined hybrids of laser pre-treated metal and thermoplastic polymers
AIP Conf. Proc. 2205, 020001 (2020)
https://doi.org/10.1063/1.5142916
Studies on single-screw extrusion of wood-polymer composites with yield stress and slip effects
AIP Conf. Proc. 2205, 020002 (2020)
https://doi.org/10.1063/1.5142917
Energy consumption of high speed multiscrew extruders
AIP Conf. Proc. 2205, 020005 (2020)
https://doi.org/10.1063/1.5142920
Mechanical properties of additively manufactured die with numerical analysis in extrusion process
AIP Conf. Proc. 2205, 020006 (2020)
https://doi.org/10.1063/1.5142921
Optimization of the UV stabilization of a plasticized PVC film for exterior automotive applications
Hélène Delinière; Jacques Lefranc; Fabienne Deuzé; Laurent Darcheville; Jérémie Soulestin; Sébastien Charlon; Marie-France Lacrampe
AIP Conf. Proc. 2205, 020007 (2020)
https://doi.org/10.1063/1.5142922
The effect of different process parameters on polyamide 66 nano fiber by force spinning method
AIP Conf. Proc. 2205, 020008 (2020)
https://doi.org/10.1063/1.5142923
An experimental study for determination of convective heat transfer coefficients on yarn production line
AIP Conf. Proc. 2205, 020011 (2020)
https://doi.org/10.1063/1.5142926
A comparison between additively and conventionally manufactured injection moulding inserts
AIP Conf. Proc. 2205, 020012 (2020)
https://doi.org/10.1063/1.5142927
Numerical simulation for predicting sink marks on injection molding and injection compression molding process
AIP Conf. Proc. 2205, 020014 (2020)
https://doi.org/10.1063/1.5142929
Development of the monitoring methods of the vent clogging in the injection mold
AIP Conf. Proc. 2205, 020015 (2020)
https://doi.org/10.1063/1.5142930
Effects of rapid cavity temperature variations on the crystallinity of PLA
AIP Conf. Proc. 2205, 020016 (2020)
https://doi.org/10.1063/1.5142931
High performance silane coupled basalt fiber – Polypropylene composites prepared by melt compounding
AIP Conf. Proc. 2205, 020018 (2020)
https://doi.org/10.1063/1.5142933
Low density, high modulus polypropylene wood composites prepared by using thermo kinetic mixer
AIP Conf. Proc. 2205, 020020 (2020)
https://doi.org/10.1063/1.5142935
Flexible electrospun PET/TiO2 nanofibrous structures for dye-sensitized solar cell (DSSC) photoanodes
AIP Conf. Proc. 2205, 020021 (2020)
https://doi.org/10.1063/1.5142936
Orientation in LLDPE cast films manufactured under different processing parameters
AIP Conf. Proc. 2205, 020022 (2020)
https://doi.org/10.1063/1.5142937
Time-dependent rheological and electrical properties of LLDPE/EVA blends containing graphene
AIP Conf. Proc. 2205, 020025 (2020)
https://doi.org/10.1063/1.5142940
Influence of reactive melt mixing on mechanical behavior of chain extended PLLA/thermoplastic polyurethane blends
AIP Conf. Proc. 2205, 020026 (2020)
https://doi.org/10.1063/1.5142941
Thermal conductivity and mechanical properties of synthetic graphite loaded polyphenylene sulfide composites
AIP Conf. Proc. 2205, 020033 (2020)
https://doi.org/10.1063/1.5142948
Characterization of mechanical and thermal properties of PLA/blowing agents composites
AIP Conf. Proc. 2205, 020034 (2020)
https://doi.org/10.1063/1.5142949
Influence of process management on the increase of dynamic solubility limits in injection foam molding
AIP Conf. Proc. 2205, 020035 (2020)
https://doi.org/10.1063/1.5142950
Thermo-expandable microcapsule as a blowing agent for producing thermoplastic elastomer vulcanized syntactic foam
AIP Conf. Proc. 2205, 020036 (2020)
https://doi.org/10.1063/1.5142951
Expanded polyamide 12 bead foams (ePA) thermo-mechanical properties of molded parts
AIP Conf. Proc. 2205, 020037 (2020)
https://doi.org/10.1063/1.5142952
Effect of TPU soft segment molecular weight on TPU’s bead foaming behavior
AIP Conf. Proc. 2205, 020040 (2020)
https://doi.org/10.1063/1.5142955
Effect of TPU hard segment content on TPU’s bead foaming behavior
AIP Conf. Proc. 2205, 020041 (2020)
https://doi.org/10.1063/1.5142956
Evaluation of electro-spun polymeric nanofibers for sound absorption applications
AIP Conf. Proc. 2205, 020042 (2020)
https://doi.org/10.1063/1.5142957
Elastomeric bio-based epoxy/clay nanocomposites
AIP Conf. Proc. 2205, 020043 (2020)
https://doi.org/10.1063/1.5142958
Rheologically determined effect of block copolymer morphology on dispersion of CNT in SEBS/CNT nanocomposites
AIP Conf. Proc. 2205, 020045 (2020)
https://doi.org/10.1063/1.5142960
Morphology distribution within injection molded parts, interpretation on the basis of stretch and work evolutions
AIP Conf. Proc. 2205, 020053 (2020)
https://doi.org/10.1063/1.5142968
Condition monitoring of non-return valves in injection molding machines using available process and machine data
AIP Conf. Proc. 2205, 020054 (2020)
https://doi.org/10.1063/1.5142969
Influence of process parameters on the rheological behavior of ultra-high molecular weight compounds
AIP Conf. Proc. 2205, 020055 (2020)
https://doi.org/10.1063/1.5142970
Synthesis of novel polymer nanocomposite for water-based drilling fluids
AIP Conf. Proc. 2205, 020057 (2020)
https://doi.org/10.1063/1.5142972
Impact of spacer on rheological properties of polyoxyethylene cationic surfactant-polymer solution
AIP Conf. Proc. 2205, 020058 (2020)
https://doi.org/10.1063/1.5142973
Promoting the strain-induced crystallization of NR/HNT composites through the use of modified palm stearin
AIP Conf. Proc. 2205, 020059 (2020)
https://doi.org/10.1063/1.5142974
Effect of polymer relaxation in automated micro polishing
AIP Conf. Proc. 2205, 020060 (2020)
https://doi.org/10.1063/1.5142975
Design of 3D scaffold geometries for optimal biodegradation of poly(lactic acid)-based bone tissue
AIP Conf. Proc. 2205, 020062 (2020)
https://doi.org/10.1063/1.5142977
Integration of acceleration sensors in polymer parts produced with selective laser sintering
AIP Conf. Proc. 2205, 020063 (2020)
https://doi.org/10.1063/1.5142978
Mechanical behavior of scaffold-like structures: Research of relationships between properties and geometry
AIP Conf. Proc. 2205, 020064 (2020)
https://doi.org/10.1063/1.5142979
Development of eco-friendly composites based on polypropylene and cellulose for additive manufacturing (fused deposition modeling)
Elena Mastalygina; Petr Pantyukhov; Alessio Massironi; Andrea Morelli; Dario Puppi; Federica Chiellini
AIP Conf. Proc. 2205, 020066 (2020)
https://doi.org/10.1063/1.5142981
New hybrid nano additives for thermoplastic compounding: CVD grown carbon fiber on graphene
Elcin Cakal Sarac; Leila Haghighi Poudeh; Jamal Seyyed Monfared Zanjani; Fevzi Çakmak Cebeci; Ismail Aydin; Yusuf Menceloglu; Burcu Saner Okan
AIP Conf. Proc. 2205, 020067 (2020)
https://doi.org/10.1063/1.5142982
Effect of the chemical modification on the thermal and rheological properties of different polylactides for foaming
AIP Conf. Proc. 2205, 020068 (2020)
https://doi.org/10.1063/1.5142983
Comparative analysis of bacterial cellulose based polymeric films for food packaging
AIP Conf. Proc. 2205, 020069 (2020)
https://doi.org/10.1063/1.5142984
Development of new treatment methods for multi material textile waste
AIP Conf. Proc. 2205, 020070 (2020)
https://doi.org/10.1063/1.5142985
MFC concept as a possible solution for closed-loop recycling of food packaging trays
AIP Conf. Proc. 2205, 020071 (2020)
https://doi.org/10.1063/1.5142986
Properties of lignocellulosic composites of coffee husk filled polypropylene
AIP Conf. Proc. 2205, 020072 (2020)
https://doi.org/10.1063/1.5142987
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.