Skip Nav Destination

Issues

Select Decade

Select Year

Issue

PRELIMINARY

Preface: Innovative Science and Technology in Mechanical Engineering for Industry 4.0

AIP Conf. Proc. 2187, 010001 (2019) https://doi.org/10.1063/1.5138255

View articletitled, Preface: Innovative Science and Technology in Mechanical Engineering for Industry 4.0

Open the PDF for in another window

ENERGY, HEAT TRANSFER AND FLUID FLOW

Numerical study on the performance and flow field of varied conical basin for efficient gravitational water vortex power plant

Didit Setyo Pamuji; Nizam Effendi; Daru Sugati

AIP Conf. Proc. 2187, 020001 (2019) https://doi.org/10.1063/1.5138256

Abstract

View articletitled, Numerical study on the performance and flow field of varied conical basin for efficient gravitational water vortex power plant

Open the PDF for in another window

The interactions of I-65° type cylinder and Savonius wind turbine for performance improvement

Gunawan Sakti; Triyogi Yuwono; Wawan Aries Widodo

AIP Conf. Proc. 2187, 020002 (2019) https://doi.org/10.1063/1.5138257

Abstract

View articletitled, The interactions of I-65° type cylinder and Savonius wind turbine for performance improvement

Open the PDF for in another window

Effect of natural gas injection timing on combustion performance & methane slip emission of diesel – NG dual fuel engine: An experimental study

Betty Ariani; I. Made Ariana; M. Aguk Fathallah

AIP Conf. Proc. 2187, 020003 (2019) https://doi.org/10.1063/1.5138258

Abstract

View articletitled, Effect of natural gas injection timing on combustion performance & methane slip emission of diesel – NG dual fuel engine: An experimental study

Open the PDF for in another window

Investigation of PEM fuel cell performance using the bio-inspired flow field combined with baffles on branch channels

A’rasy Fahruddin; Djatmiko Ichsani; Fadlilatul Taufany; Budi Utomo Kukuh Widodo

AIP Conf. Proc. 2187, 020004 (2019) https://doi.org/10.1063/1.5138259

Abstract

View articletitled, Investigation of PEM fuel cell performance using the bio-inspired flow field combined with baffles on branch channels

Open the PDF for in another window

The experiment study of the performance of air heater solar collector type dimple inline plate v-corrugated absorber

Marsianus M. F. Hanmina; Djatmiko Ichsani; Mohammad Hakam

AIP Conf. Proc. 2187, 020005 (2019) https://doi.org/10.1063/1.5138260

Abstract

View articletitled, The experiment study of the performance of air heater solar collector type dimple inline plate v-corrugated absorber

Open the PDF for in another window

Effects of advancing injection timing on the engine performances and emissions of a diesel engine with 35% water in diesel emulsion fuel

Irvan Septian Krisandika; Bambang Sudarmanta; Rosid

AIP Conf. Proc. 2187, 020006 (2019) https://doi.org/10.1063/1.5138261

Abstract

View articletitled, Effects of advancing injection timing on the engine performances and emissions of a diesel engine with 35% water in diesel emulsion fuel

Open the PDF for in another window

Experimental study of performance of scroll type expander in organic rankine cycle (ORC) with R-141b working fluid

Dueng Deriva; Prabowo; M. Yunus Abdullah

AIP Conf. Proc. 2187, 020007 (2019) https://doi.org/10.1063/1.5138262

Abstract

View articletitled, Experimental study of performance of scroll type expander in organic rankine cycle (ORC) with R-141b working fluid

Open the PDF for in another window

CFD simulations of complex fluid flow in gas-solid fluidized bed using modified k-ε turbulence models

Asyari Daryus; Ahmad Indra Siswantara; Budiarso; Budi Sumartono; Gun Gun R. Gunadi; Hariyotejo Pujowidodo; Candra D. Widiawaty

AIP Conf. Proc. 2187, 020008 (2019) https://doi.org/10.1063/1.5138263

Abstract

View articletitled, CFD simulations of complex fluid flow in gas-solid fluidized bed using modified <em>k-ε</em> turbulence models

Open the PDF for in another window

Unsteady simulations of Savonius and Icewind turbine blade design using fluid-structure interaction method

Zain Lillahulhaq; Vivien Suphandani Djanali

AIP Conf. Proc. 2187, 020009 (2019) https://doi.org/10.1063/1.5138264

Abstract

View articletitled, Unsteady simulations of Savonius and Icewind turbine blade design using fluid-structure interaction method

Open the PDF for in another window

Numerical simulation analysis of supersonic asymmetric converging-diverging nozzle with stepped curvature and curved discretization

Hariyotejo Pujowidodo; Ahmad Indra Siswantara; Budiarso; Asyari Daryus; Gun Gun Ramdlan Gunadi; Candra Damis Widiawaty

AIP Conf. Proc. 2187, 020010 (2019) https://doi.org/10.1063/1.5138265

Abstract

View articletitled, Numerical simulation analysis of supersonic asymmetric converging-diverging nozzle with stepped curvature and curved discretization

Open the PDF for in another window

Numerical study of the characteristics of flow and heat transfer design of USC 1000 MW superheater boiler

Ronny C. Sirait; Prabowo

AIP Conf. Proc. 2187, 020011 (2019) https://doi.org/10.1063/1.5138266

Abstract

View articletitled, Numerical study of the characteristics of flow and heat transfer design of USC 1000 MW superheater boiler

Open the PDF for in another window

Influence of water diesel emulsion on the performance and emission diesel engine under varying engine load

Abdul Wahid Arohman; Bambang Sudarmanta; Rosid

AIP Conf. Proc. 2187, 020012 (2019) https://doi.org/10.1063/1.5138267

Abstract

View articletitled, Influence of water diesel emulsion on the performance and emission diesel engine under varying engine load

Open the PDF for in another window

Evaluation of thermal and hydraulic of air flow through perforated concave delta winglet vortex generators in a rectangular channel with field synergy principle

Syaiful; Pracayasa Ade Putra; Mohammad Tauviqirrahman; Nazaruddin Sinaga; Myung-whan Bae

AIP Conf. Proc. 2187, 020013 (2019) https://doi.org/10.1063/1.5138268

Abstract

View articletitled, Evaluation of thermal and hydraulic of air flow through perforated concave delta winglet vortex generators in a rectangular channel with field synergy principle

Open the PDF for in another window

Experimental study effect of classifier pulverizer opening setting variation on fineness production passed 200 mesh

Imam Dwi Prasetyo; Prabowo

AIP Conf. Proc. 2187, 020014 (2019) https://doi.org/10.1063/1.5138269

Abstract

View articletitled, Experimental study effect of classifier pulverizer opening setting variation on fineness production passed 200 mesh

Open the PDF for in another window

Analysis and optimization of a 400 MW coal-fired power plant under a proposed low-rank coal with flue gas recirculation mode

I. Gede Darmadi; Budi Utomo Kukuh Widodo

AIP Conf. Proc. 2187, 020015 (2019) https://doi.org/10.1063/1.5138270

Abstract

View articletitled, Analysis and optimization of a 400 MW coal-fired power plant under a proposed low-rank coal with flue gas recirculation mode

Open the PDF for in another window

Experimental study: The effect of the variation of the mill air fuel ratio on fineness in the pulverizer of the 600 MW Indonesian steam power plant

Bintoro Adi Nugroho; Djatmiko Ichsani

AIP Conf. Proc. 2187, 020016 (2019) https://doi.org/10.1063/1.5138271

Abstract

View articletitled, Experimental study: The effect of the variation of the mill air fuel ratio on fineness in the pulverizer of the 600 MW Indonesian steam power plant

Open the PDF for in another window

Numerical study of three-dimensional flow characteristics around the wing airfoil E562 with forward and rearward wingtip fence

Setyo Hariyadi Suranto Putro; Sutardi; Wawan Aries Widodo

AIP Conf. Proc. 2187, 020017 (2019) https://doi.org/10.1063/1.5138272

Abstract

View articletitled, Numerical study of three-dimensional flow characteristics around the wing airfoil E562 with forward and rearward wingtip fence

Open the PDF for in another window

Numerical study of dual fuel engine using proportional natural gas split injection

Frengki Mohamad Felayati; Semin; Beny Cahyono; Rosli Abu Bakar

AIP Conf. Proc. 2187, 020018 (2019) https://doi.org/10.1063/1.5138273

Abstract

View articletitled, Numerical study of dual fuel engine using proportional natural gas split injection

Open the PDF for in another window

Effect of B20 heating on the macroscopic fuel spray characteristic

Barokah; Semin; Faris M. Muhammad; Beny Cahyono; Bambang Sampurno; Saiful Irfan

AIP Conf. Proc. 2187, 020019 (2019) https://doi.org/10.1063/1.5138274

Abstract

View articletitled, Effect of B20 heating on the macroscopic fuel spray characteristic

Open the PDF for in another window

An experimental investigation of natural gas injection timing on dual-fuel engine

Muhammad Badrus Zaman; Yudha Prasetiyo; Semin

AIP Conf. Proc. 2187, 020020 (2019) https://doi.org/10.1063/1.5138275

Abstract

View articletitled, An experimental investigation of natural gas injection timing on dual-fuel engine

Open the PDF for in another window

Numerical investigation of flow through a square duct with installed tripping rod inside on square elbow 90°

Ikki Adji Dharma; Wawan Aries Widodo; Randi Purnama Putra

AIP Conf. Proc. 2187, 020021 (2019) https://doi.org/10.1063/1.5138276

Abstract

View articletitled, Numerical investigation of flow through a square duct with installed tripping rod inside on square elbow 90°

Open the PDF for in another window

Performances of three solar distillers with different absorbers

M. Mirmanto; M. Wirawan; I. M. A. Sayoga; A. T. Wijayanta; P. Pranowo; M. Faisal; A. Abdullah

AIP Conf. Proc. 2187, 020022 (2019) https://doi.org/10.1063/1.5138277

Abstract

View articletitled, Performances of three solar distillers with different absorbers

Open the PDF for in another window

Effect of natural gas injection pulse width to diesel dual fuel performance

Muhammad Badrus Zaman; Dimas Tegar Rahmatullah; Semin; Frengki Mohamad Felayati

AIP Conf. Proc. 2187, 020023 (2019) https://doi.org/10.1063/1.5138278

Abstract

View articletitled, Effect of natural gas injection pulse width to diesel dual fuel performance

Open the PDF for in another window

Investigation the effect of superficial velocity to the heat transfer in bubbling regime of fluidization using CFD simulation

Candra Damis Widiawaty; Ahmad Indra Siswantara; Budiarso; Asyari Daryus; Gun Gun Ramdlan Gunadi; Hariyotejo Pujowidodo

AIP Conf. Proc. 2187, 020024 (2019) https://doi.org/10.1063/1.5138279

Abstract

View articletitled, Investigation the effect of superficial velocity to the heat transfer in bubbling regime of fluidization using CFD simulation

Open the PDF for in another window

Force coefficient characteristics on a four circular cylinders in an in-line square configuration near a plane wall at “small gap”

A. Grummy Wailanduw; Triyogi Yuwono; Priyo Heru Adiwibowo

AIP Conf. Proc. 2187, 020025 (2019) https://doi.org/10.1063/1.5138280

Abstract

View articletitled, Force coefficient characteristics on a four circular cylinders in an in-line square configuration near a plane wall at “small gap”

Open the PDF for in another window

Optimization of CNG injection duration on combustions and emissions characteristics on CNG-CPO biodiesel dual fuel engine with load variations

Dori Yuvenda; Bambang Sudarmanta; Arif Wahjudi

AIP Conf. Proc. 2187, 020026 (2019) https://doi.org/10.1063/1.5138281

Abstract

View articletitled, Optimization of CNG injection duration on combustions and emissions characteristics on CNG-CPO biodiesel dual fuel engine with load variations

Open the PDF for in another window

Numerical study of flow characteristic and heat transfer on high-pressure turbine forced cooling process of sub critical steam turbine

Suyadi; Ary Bachtiar Krisna Putra

AIP Conf. Proc. 2187, 020027 (2019) https://doi.org/10.1063/1.5138282

Abstract

View articletitled, Numerical study of flow characteristic and heat transfer on high-pressure turbine forced cooling process of sub critical steam turbine

Open the PDF for in another window

Thermodynamic investigation of automotive air conditioning system performance using ejector as an expansion device

Kasni Sumeru; Pratikto; Rachmad Imbang Tritjahjono; Mohamad Firdaus Sukri

AIP Conf. Proc. 2187, 020028 (2019) https://doi.org/10.1063/1.5138283

Abstract

View articletitled, Thermodynamic investigation of automotive air conditioning system performance using ejector as an expansion device

Open the PDF for in another window

Analysis of particulate dispersion in Suralaya coal-fired power plant

Vini Charloth; Wawan Aries Widodo; IDAA Warmadewanthi

AIP Conf. Proc. 2187, 020029 (2019) https://doi.org/10.1063/1.5138284

Abstract

View articletitled, Analysis of particulate dispersion in Suralaya coal-fired power plant

Open the PDF for in another window

Experimental study the effect of excess air to unburn carbon and boiler efficiency using coal with heating value 4200 kcal/kg at a 500 MW steam power plant

Imam Siswo Utomo; Djatmiko Ichsani

AIP Conf. Proc. 2187, 020030 (2019) https://doi.org/10.1063/1.5138285

Abstract

View articletitled, Experimental study the effect of excess air to unburn carbon and boiler efficiency using coal with heating value 4200 kcal/kg at a 500 MW steam power plant

Open the PDF for in another window

The effects of pilot injection timing on the combustion process and exhaust emissions in dual-fuel diesel engine using biodiesel-CNG at high load

Ahmad Arbi Trihatmojo; Dori Yuvenda; Bambang Sudarmanta

AIP Conf. Proc. 2187, 020031 (2019) https://doi.org/10.1063/1.5138286

Abstract

View articletitled, The effects of pilot injection timing on the combustion process and exhaust emissions in dual-fuel diesel engine using biodiesel-CNG at high load

Open the PDF for in another window

Numerical study effect of burner tilt angle on the boiler rear pass temperature on PLTU Banten 1 Suralaya under LRC coal conditions

Nugroho Setyo Hutomo; Arif Wahjudi

AIP Conf. Proc. 2187, 020032 (2019) https://doi.org/10.1063/1.5138287

Abstract

View articletitled, Numerical study effect of burner tilt angle on the boiler rear pass temperature on PLTU Banten 1 Suralaya under LRC coal conditions

Open the PDF for in another window

Numerical simulation of coal particle size (fineness) effect to combustion characteristics of sub-critical pulverized coal boiler 600 MW capacity

Heri Purnomo; Bambang Sudarmanta

AIP Conf. Proc. 2187, 020033 (2019) https://doi.org/10.1063/1.5138288

Abstract

View articletitled, Numerical simulation of coal particle size (fineness) effect to combustion characteristics of sub-critical pulverized coal boiler 600 MW capacity

Open the PDF for in another window

Numerical study of optimization performance induced draft fan through openings setting the inlet guide vane

Yanuar Rulyanto; Heru Mirmanto

AIP Conf. Proc. 2187, 020034 (2019) https://doi.org/10.1063/1.5138289

Abstract

View articletitled, Numerical study of optimization performance induced draft fan through openings setting the inlet guide vane

Open the PDF for in another window

Analysis of an optimum method for power generation using flare gas from oil refinery plants

Bambang Arip Dwiyantoro; Farai William Saungweme

AIP Conf. Proc. 2187, 020035 (2019) https://doi.org/10.1063/1.5138290

Abstract

View articletitled, Analysis of an optimum method for power generation using flare gas from oil refinery plants

Open the PDF for in another window

Numerical analysis of conjugate porous media for increasing heat transfer rate in fixed bed spheres

Farida Rahmawati Purnadiana; Prabowo; Herman Sasongko

AIP Conf. Proc. 2187, 020036 (2019) https://doi.org/10.1063/1.5138291

Abstract

View articletitled, Numerical analysis of conjugate porous media for increasing heat transfer rate in fixed bed spheres

Open the PDF for in another window

Flow structure investigation heat transfer enhancement on inner tubular pipe with winglet vortex generator

Stefan Mardikus; Malfin; I. Made Wicaksana Ekaputra

AIP Conf. Proc. 2187, 020037 (2019) https://doi.org/10.1063/1.5138292

Abstract

View articletitled, Flow structure investigation heat transfer enhancement on inner tubular pipe with winglet vortex generator

Open the PDF for in another window

Numerical study on in-furnace blending coal combustion characteristics in a 625 MW tangentially fired pulverized coal boiler

Fajar Purnomo; Atok Setiyawan

AIP Conf. Proc. 2187, 020038 (2019) https://doi.org/10.1063/1.5138293

Abstract

View articletitled, Numerical study on in-furnace blending coal combustion characteristics in a 625 MW tangentially fired pulverized coal boiler

Open the PDF for in another window

Experimental and numerical study on the boundary layer flow over a flat plate with a semi-circular bump with and without a transversal wire

S. Sutardi; Radiaprima Kartika Wijaya; Setyo Hariyadi

AIP Conf. Proc. 2187, 020039 (2019) https://doi.org/10.1063/1.5138294

Abstract

View articletitled, Experimental and numerical study on the boundary layer flow over a flat plate with a semi-circular bump with and without a transversal wire

Open the PDF for in another window

Ratchet flywheel regenerative system to enhance energy captured for electric vehicle

Agung Prijo Budijono; I. Nyoman Sutantra; Agus Sigit Pramono

AIP Conf. Proc. 2187, 020040 (2019) https://doi.org/10.1063/1.5138295

Abstract

View articletitled, Ratchet flywheel regenerative system to enhance energy captured for electric vehicle

Open the PDF for in another window

Numerical study of savonius wind turbines with standard and Bach-profile blade variations

Vivien Suphandani Djanali; Zharfan Fathurrahman; Bambang Arip Dwiyantoro; Nur Ikhwan

AIP Conf. Proc. 2187, 020041 (2019) https://doi.org/10.1063/1.5138296

Abstract

View articletitled, Numerical study of savonius wind turbines with standard and Bach-profile blade variations

Open the PDF for in another window

Site investigation on water cooled chiller plant for energy conservation and environmental impact reduction of a large shopping mall

I. Nyoman Suamir; Made Ery Arsana; I. Wayan Adi Subagia; I. Made Rasta; Luh Putu Ike Midiani; Achmad Wibolo

AIP Conf. Proc. 2187, 020042 (2019) https://doi.org/10.1063/1.5138297

Abstract

View articletitled, Site investigation on water cooled chiller plant for energy conservation and environmental impact reduction of a large shopping mall

Open the PDF for in another window

The effect of advancing injection timing on combustion characteristics using stationary diesel engine with 30% water in diesel emulsion fuel

Bambang Sudarmanta; Rosid; Irvan Septian Krisandika; Abdul Wahid Arohman

AIP Conf. Proc. 2187, 020043 (2019) https://doi.org/10.1063/1.5138298

Abstract

View articletitled, The effect of advancing injection timing on combustion characteristics using stationary diesel engine with 30% water in diesel emulsion fuel

Open the PDF for in another window

Passive flow control in square duct and 90° elbow with circular turbulator at certain gaps

Randi Purnama Putra; Sutardi; Wawan Aries Widodo; Rizkia Putra Pratama

AIP Conf. Proc. 2187, 020044 (2019) https://doi.org/10.1063/1.5138299

Abstract

View articletitled, Passive flow control in square duct and 90° elbow with circular turbulator at certain gaps

Open the PDF for in another window

Modeling and simulation of engine speed on idle speed conditions system by using MIMO on spark ignition engine

Irianto; Irma Wulandari

AIP Conf. Proc. 2187, 020045 (2019) https://doi.org/10.1063/1.5138300

Abstract

View articletitled, Modeling and simulation of engine speed on idle speed conditions system by using MIMO on spark ignition engine

Open the PDF for in another window

Effect of 35% water in diesel emulsion fuel and AFR enriched combustion on the combustion and emissions characteristics

Rosid; Bambang Sudarmanta; Lukman Atmaja; Irvan Septian Krisandika; Abdul Wahid Arohman

AIP Conf. Proc. 2187, 020046 (2019) https://doi.org/10.1063/1.5138301

Abstract

View articletitled, Effect of 35% water in diesel emulsion fuel and AFR enriched combustion on the combustion and emissions characteristics

Open the PDF for in another window

Development and experimental evaluation of small concentrated solar oven

Tri Ayodha Ajiwiguna; Narulita Andriyani; Suwandi

AIP Conf. Proc. 2187, 020047 (2019) https://doi.org/10.1063/1.5138302

Abstract

View articletitled, Development and experimental evaluation of small concentrated solar oven

Open the PDF for in another window

Design evaluation and thermal calculations of the developed automotive radiators for student formula SAE vehicle “Bimasakti”

Fajar Fitrahadi Danda; M. Reza Pradecta; Luqman Al Huda; Akmal Irfan Majid

AIP Conf. Proc. 2187, 020048 (2019) https://doi.org/10.1063/1.5138303

Abstract

View articletitled, Design evaluation and thermal calculations of the developed automotive radiators for student formula SAE vehicle “Bimasakti”

Open the PDF for in another window

Numerical study of heat transfer and stress-strain on 2 joints and 3 joints soot-blower lance tube at 600 MW power plant

Agung Nugroho; Agus Sigit Pramono

AIP Conf. Proc. 2187, 020049 (2019) https://doi.org/10.1063/1.5138304

Abstract

View articletitled, Numerical study of heat transfer and stress-strain on 2 joints and 3 joints soot-blower lance tube at 600 MW power plant

Open the PDF for in another window

MANUFACTURING

Numerical structure analysis of air purifier bike with frame designs and materials variation

Bambang Iskandriawan; Joko Ade Nugroho; Jatmiko

AIP Conf. Proc. 2187, 030001 (2019) https://doi.org/10.1063/1.5138305

Abstract

View articletitled, Numerical structure analysis of air purifier bike with frame designs and materials variation

Open the PDF for in another window

Effect of punch angle and punch radius on bend angle through air V-bending of sheet metal

Muhammad Arsyad Suyuti; Muhammad Iswar; Rusdi Nur

AIP Conf. Proc. 2187, 030002 (2019) https://doi.org/10.1063/1.5138306

Abstract

View articletitled, Effect of punch angle and punch radius on bend angle through air V-bending of sheet metal

Open the PDF for in another window

Optimizing the machining conditions on friction stir welding of aluminum alloy through design experiments

Muhammad Iswar; Muhammad Arsyad Suyuti; Rusdi Nur

AIP Conf. Proc. 2187, 030003 (2019) https://doi.org/10.1063/1.5138307

Abstract

View articletitled, Optimizing the machining conditions on friction stir welding of aluminum alloy through design experiments

Open the PDF for in another window

The combination effect of machine dynamic behavior, laser power and scan speed on the accuracy of single layer bead corner formation in the selective laser melting

Teguh Pudji Purwanto; Alva Edy Tontowi; Rachmat Sriwijaya

AIP Conf. Proc. 2187, 030004 (2019) https://doi.org/10.1063/1.5138308

Abstract

View articletitled, The combination effect of machine dynamic behavior, laser power and scan speed on the accuracy of single layer bead corner formation in the selective laser melting

Open the PDF for in another window

Development of tools utilization monitoring system on labor-intensive manufacturing industries

Herman Budi Harja; Tri Prakosa; Sri Raharno; Yatna Yuwana; Indra Nurhadi; Rachmad Hartono; Muhammad Zulfahmi; Meirina Yanti Pane; Maulana Yusuf

AIP Conf. Proc. 2187, 030005 (2019) https://doi.org/10.1063/1.5138309

Abstract

View articletitled, Development of tools utilization monitoring system on labor-intensive manufacturing industries

Open the PDF for in another window

The combined methodology of backpropagation neural network with genetic algorithm to optimize delamination factor and surface roughness in end-milling of carbon fiber reinforced polymer composites

Mohammad Khoirul Effendi; Bobby Oedy Pramoedyo Soepangkat; Bambang Pramujati; Rachmadi Norcahyo; Fajar Perdana Nurullah

AIP Conf. Proc. 2187, 030006 (2019) https://doi.org/10.1063/1.5138310

Abstract

View articletitled, The combined methodology of backpropagation neural network with genetic algorithm to optimize delamination factor and surface roughness in end-milling of carbon fiber reinforced polymer composites

Open the PDF for in another window

Prediction of cutting force in end milling of glass fiber reinforced polymer (GFRP) composites using adaptive neuro fuzzy inference system (ANFIS)

Mohammad Khoirul Effendi; Bobby Oedy Pramoedyo Soepangkat; Suhardjono; Rachmadi Norcahyo; Sutikno; Sampurno

AIP Conf. Proc. 2187, 030007 (2019) https://doi.org/10.1063/1.5138311

Abstract

View articletitled, Prediction of cutting force in end milling of glass fiber reinforced polymer (GFRP) composites using adaptive neuro fuzzy inference system (ANFIS)

Open the PDF for in another window

Effect of metal inert gas welding parameters to a dissimilar thin plate joint

Hakam Muzakki; Mualim; Muhammad Yusuf

AIP Conf. Proc. 2187, 030008 (2019) https://doi.org/10.1063/1.5138312

Abstract

View articletitled, Effect of metal inert gas welding parameters to a dissimilar thin plate joint

Open the PDF for in another window

Optimization of friction welding using response surface method and Taguchi

Sabarudin Akhmad; Hakam Muzakki; Setya Mujaini; Yusqy Fajrul Falah

AIP Conf. Proc. 2187, 030009 (2019) https://doi.org/10.1063/1.5138313

Abstract

View articletitled, Optimization of friction welding using response surface method and Taguchi

Open the PDF for in another window

Delamination factor and cutting force optimizations in end-milling of carbon fiber reinforced polymer composites using backpropagation neural network-ant colony optimization

Bobby Oedy Pramoedyo Soepangkat; Mohammad Khoirul Effendi; Bambang Pramujati; Rachmadi Norcahyo; Fathi Robbany

AIP Conf. Proc. 2187, 030010 (2019) https://doi.org/10.1063/1.5138314

Abstract

View articletitled, Delamination factor and cutting force optimizations in end-milling of carbon fiber reinforced polymer composites using backpropagation neural network-ant colony optimization

Open the PDF for in another window

Analysis of chips formation in subtractive manufacturing for working safety

Fachri Koeshardono; Aep Baihaki

AIP Conf. Proc. 2187, 030011 (2019) https://doi.org/10.1063/1.5138315

Abstract

View articletitled, Analysis of chips formation in subtractive manufacturing for working safety

Open the PDF for in another window

Effect of feeding and depth of cut on surface roughness in truing and dressing process using cylindrical grinding machine

Fachri Koeshardono; Seafuri Khairunnisa

AIP Conf. Proc. 2187, 030012 (2019) https://doi.org/10.1063/1.5138316

Abstract

View articletitled, Effect of feeding and depth of cut on surface roughness in truing and dressing process using cylindrical grinding machine

Open the PDF for in another window

Replacement scheduling of brine heater desalination plant using binary integer programming method

Dini Rahmawati; Abdullah Shahab

AIP Conf. Proc. 2187, 030013 (2019) https://doi.org/10.1063/1.5138317

Abstract

View articletitled, Replacement scheduling of brine heater desalination plant using binary integer programming method

Open the PDF for in another window

Design analysis in the application of solar energy for crossing river HDPE boat

Eko Julianto; Agoes Santoso

AIP Conf. Proc. 2187, 030014 (2019) https://doi.org/10.1063/1.5138318

Abstract

View articletitled, Design analysis in the application of solar energy for crossing river HDPE boat

Open the PDF for in another window

Multi-response optimization on vibration and surface roughness of the process parameter surface grinding of OCR12VM using Taguchi-grey method

Hendri Jumianto; Suhardjono; Sampurno; M. Khoirul Effendi

AIP Conf. Proc. 2187, 030015 (2019) https://doi.org/10.1063/1.5138319

Abstract

View articletitled, Multi-response optimization on vibration and surface roughness of the process parameter surface grinding of OCR12VM using Taguchi-grey method

Open the PDF for in another window

Life cycle cost and replacement analysis for power plant generator (case study at PLTU Labuan unit #2)

Ridho Faqih Luthfi; Sutikno

AIP Conf. Proc. 2187, 030016 (2019) https://doi.org/10.1063/1.5138320

Abstract

View articletitled, Life cycle cost and replacement analysis for power plant generator (case study at PLTU Labuan unit #2)

Open the PDF for in another window

Process simulation based on 3D printed vero-clear to produce injection mold inserts

Riona Ihsan Media; Ismet P. Ilyas

AIP Conf. Proc. 2187, 030017 (2019) https://doi.org/10.1063/1.5138321

Abstract

View articletitled, Process simulation based on 3D printed vero-clear to produce injection mold inserts

Open the PDF for in another window

Assembly line design in final assembly excavator at XYZ Corp using genetic algorithm

Risty Mayang Sari; Dida Diah Damayanti; Widia Juliani

AIP Conf. Proc. 2187, 030018 (2019) https://doi.org/10.1063/1.5138322

Abstract

View articletitled, Assembly line design in final assembly excavator at XYZ Corp using genetic algorithm

Open the PDF for in another window

Waste analysis to improve container port performance using Lean Six Sigma method

Witantyo; Naurah Ranaindy

AIP Conf. Proc. 2187, 030019 (2019) https://doi.org/10.1063/1.5138323

Abstract

View articletitled, Waste analysis to improve container port performance using Lean Six Sigma method

Open the PDF for in another window

MATERIAL AND METALLURGY

Aging and degradation of electrode Cu spot welding

Agus Sifa; Ario S. Baskoro; Sugeng Supriadi; Tito Endramawan; Badruzzaman; Felix Dionisius

AIP Conf. Proc. 2187, 040001 (2019) https://doi.org/10.1063/1.5138324

Abstract

View articletitled, Aging and degradation of electrode Cu spot welding

Open the PDF for in another window

Analysis of superheater tubes degradation at a tangentially fired pulverized coal power plant

Muhammad Aujul Majdi; Suwarno

AIP Conf. Proc. 2187, 040002 (2019) https://doi.org/10.1063/1.5138325

Abstract

View articletitled, Analysis of superheater tubes degradation at a tangentially fired pulverized coal power plant

Open the PDF for in another window

Effect of vehicle speed to the fatigue life of a coil spring based on strain-life approach

Teuku Edisah Putra; Husaini; Muhammad Ramdani Dongoran

AIP Conf. Proc. 2187, 040003 (2019) https://doi.org/10.1063/1.5138326

Abstract

View articletitled, Effect of vehicle speed to the fatigue life of a coil spring based on strain-life approach

Open the PDF for in another window

Dissimilar joining metal of aluminum 6061 and galvanized pipe using friction welding method

Widia Setiawan; Akhmad Herdiyanto; Nugroho Santoso; Surojo

AIP Conf. Proc. 2187, 040004 (2019) https://doi.org/10.1063/1.5138327

Abstract

View articletitled, Dissimilar joining metal of aluminum 6061 and galvanized pipe using friction welding method

Open the PDF for in another window

Evaluation of inhibitive action from papaya leaf on surface API 5L Grade B in acid solution

Atria Pradityana; Nur Husodo; Budi Luwar Sanyoto; Heru Mirmanto; Mahirul Mursid

AIP Conf. Proc. 2187, 040005 (2019) https://doi.org/10.1063/1.5138328

Abstract

View articletitled, Evaluation of inhibitive action from papaya leaf on surface API 5L Grade B in acid solution

Open the PDF for in another window

Effects of processing parameters on the tensile strength of injection molding unidirectional glass fiber reinforced polypropylene composite

Muhammad Alek Ad; H. S. B. Rochardjo; Budiyantoro Cahyo

AIP Conf. Proc. 2187, 040006 (2019) https://doi.org/10.1063/1.5138329

Abstract

View articletitled, Effects of processing parameters on the tensile strength of injection molding unidirectional glass fiber reinforced polypropylene composite

Open the PDF for in another window

The effect of processing parameter on composite’s impact strength of continuous unidirectional polypropylene-glass fiber composite

Satrio Eko Wicaksono; H. S. B. Rochardjo; Budiyantoro Cahyo

AIP Conf. Proc. 2187, 040007 (2019) https://doi.org/10.1063/1.5138330

Abstract

View articletitled, The effect of processing parameter on composite’s impact strength of continuous unidirectional polypropylene-glass fiber composite

Open the PDF for in another window

MECHANICAL STRUCTURE, DESIGN AND VIBRATION

Optimization in airless tires design using backpropagation neural network (BPNN) and genetic algorithm (GA) approaches

Agus Sigit Pramono; Mohammad Khoirul Effendi

AIP Conf. Proc. 2187, 050001 (2019) https://doi.org/10.1063/1.5138331

Abstract

View articletitled, Optimization in airless tires design using backpropagation neural network (BPNN) and genetic algorithm (GA) approaches

Open the PDF for in another window

Front surface geometry modeling of remotely operated vehicle (ROV) body observation class

Dhimas Satria; Romi Wiryadinata; DPAL Esiswitoyo; Muhamad Haykal Fasya; Imron Rosyadi; Sidik Susilo; Rina Lusiani

AIP Conf. Proc. 2187, 050002 (2019) https://doi.org/10.1063/1.5138332

Abstract

View articletitled, Front surface geometry modeling of remotely operated vehicle (ROV) body observation class

Open the PDF for in another window

Evaluation of derailment risk by simplified analytic procedure and computer simulation

Yunendar Aryo Handoko; Yunus Sinaga; Prasetya Adi Nugraha

AIP Conf. Proc. 2187, 050003 (2019) https://doi.org/10.1063/1.5138333

Abstract

View articletitled, Evaluation of derailment risk by simplified analytic procedure and computer simulation

Open the PDF for in another window

Effect of contact surface temperature on wear of nickel-chromium layer

I. M. Widiyarta; I. M. Parwata; I. P. Lokantara; Dwipayana

AIP Conf. Proc. 2187, 050004 (2019) https://doi.org/10.1063/1.5138334

Abstract

View articletitled, Effect of contact surface temperature on wear of nickel-chromium layer

Open the PDF for in another window

Urban soundscape prediction based on acoustic ecology and MFCC parameters

Anastasia Noviyanti; Anugrah Sabdono Sudarsono; Dian Kusumaningrum

AIP Conf. Proc. 2187, 050005 (2019) https://doi.org/10.1063/1.5138335

Abstract

View articletitled, Urban soundscape prediction based on acoustic ecology and MFCC parameters

Open the PDF for in another window

Dynamic trajectory generation of suspended cable-driven parallel robot

Adlina Taufik Syamlan; Latifah Nurahmi; Bambang Pramujati; Mohamad Nasyir Tamara

AIP Conf. Proc. 2187, 050006 (2019) https://doi.org/10.1063/1.5138336

Abstract

View articletitled, Dynamic trajectory generation of suspended cable-driven parallel robot

Open the PDF for in another window

Mapping of operating modes, power flows and analysis of tractive force characteristics of series-parallel hybrid vehicle in certain driving cycle (Case study: Toyota Prius Hybrid)

Luthfie Hadi; I. Nyoman Sutantra

AIP Conf. Proc. 2187, 050007 (2019) https://doi.org/10.1063/1.5138337

Abstract

View articletitled, Mapping of operating modes, power flows and analysis of tractive force characteristics of series-parallel hybrid vehicle in certain driving cycle (Case study: Toyota Prius Hybrid)

Open the PDF for in another window

Design optimization, manufacturing, and testing of affordable 3-axis load cell for reliable force plate component

Satrio Wicaksono; Gita P. Ariana; F. Ferryanto; Agung Wibowo; Andi Isra Mahyuddin

AIP Conf. Proc. 2187, 050008 (2019) https://doi.org/10.1063/1.5138338

Abstract

View articletitled, Design optimization, manufacturing, and testing of affordable 3-axis load cell for reliable force plate component

Open the PDF for in another window

Mapping of operating modes, power flows and analysis of tractive force characteristics of series – Parallel plug-in hybrid vehicle in certain driving cycle (Case study: Toyota Prius Plug-in Hybrid)

Darius Darell Giovanni; I. Nyoman Sutantra

AIP Conf. Proc. 2187, 050009 (2019) https://doi.org/10.1063/1.5138339

Abstract

View articletitled, Mapping of operating modes, power flows and analysis of tractive force characteristics of series – Parallel plug-in hybrid vehicle in certain driving cycle (Case study: Toyota Prius Plug-in Hybrid)

Open the PDF for in another window

The influence of un-lean CNG injection to the material strength of the single cylinder dual fuel diesel engine

Agoes Santoso; Bambang Sampurno; Semin; Beny Cahyono

AIP Conf. Proc. 2187, 050010 (2019) https://doi.org/10.1063/1.5138340

Abstract

View articletitled, The influence of un-lean CNG injection to the material strength of the single cylinder dual fuel diesel engine

Open the PDF for in another window

Operator splitting method for solving anisotropic problem

Is Bunyamin Suryo; Maureen Clerc

AIP Conf. Proc. 2187, 050011 (2019) https://doi.org/10.1063/1.5138341

Abstract

View articletitled, Operator splitting method for solving anisotropic problem

Open the PDF for in another window

Topology optimization on geometry of 3D printed “Impulse RC Alien 4 Inch” racing quadcopter frame with polylactic acid material

Imang Eko Saputro; Alief Wikarta; Ali Muhtar

AIP Conf. Proc. 2187, 050012 (2019) https://doi.org/10.1063/1.5138342

Abstract

View articletitled, Topology optimization on geometry of 3D printed “Impulse RC Alien 4 Inch” racing quadcopter frame with polylactic acid material

Open the PDF for in another window

Design and analysis for vibration assisted micro milling

Wina Libyawati; Gandjar Kiswanto; Poly Poly

AIP Conf. Proc. 2187, 050013 (2019) https://doi.org/10.1063/1.5138343

Abstract

View articletitled, Design and analysis for vibration assisted micro milling

Open the PDF for in another window

Design and analysis of regenerative shock absorber using ball screw mechanism for vehicle suspension

Dhion Khairul Nugraha; Harus Laksana Guntur

AIP Conf. Proc. 2187, 050014 (2019) https://doi.org/10.1063/1.5138344

Abstract

View articletitled, Design and analysis of regenerative shock absorber using ball screw mechanism for vehicle suspension

Open the PDF for in another window

Power prediction of a 4-CRU parallel mechanism based on extra gradient boosting regressor

Mochammad Solichin; Latifah Nurahmi; Bimo Jati Putro

AIP Conf. Proc. 2187, 050015 (2019) https://doi.org/10.1063/1.5138345

Abstract

View articletitled, Power prediction of a 4-CRU parallel mechanism based on extra gradient boosting regressor

Open the PDF for in another window

Dynamic analysis of Bangladesh’s broad gauge train using multibody system

Satrio Wicaksono; Handy Tri Husodo; Andi Isra Mahyuddin

AIP Conf. Proc. 2187, 050016 (2019) https://doi.org/10.1063/1.5138346

Abstract

View articletitled, Dynamic analysis of Bangladesh’s broad gauge train using multibody system

Open the PDF for in another window

Noise reduction of passenger vehicle radiator cooling fan by utilizing additional plates and damping materials

Rachmat Sriwijaya; Ilham Anjasmoro; Muhamad Akmal; Galih Prima Yoga; Teguh Pudji Purwanto

AIP Conf. Proc. 2187, 050017 (2019) https://doi.org/10.1063/1.5138347

Abstract

View articletitled, Noise reduction of passenger vehicle radiator cooling fan by utilizing additional plates and damping materials

Open the PDF for in another window

Simulative study and stress analysis of conventional pumping unit using finite element method

Rachmad Pascal Tribuana; Rachmat Sriwijaya

AIP Conf. Proc. 2187, 050018 (2019) https://doi.org/10.1063/1.5138348

Abstract

View articletitled, Simulative study and stress analysis of conventional pumping unit using finite element method

Open the PDF for in another window

The effect of suction pressure of vacuum clamp on the aluminum plate surface following the cutting process using mini PC-based CNC milling

Karnova Yanel; Herianto; Rachmat Sriwijaya

AIP Conf. Proc. 2187, 050019 (2019) https://doi.org/10.1063/1.5138349

Abstract

View articletitled, The effect of suction pressure of vacuum clamp on the aluminum plate surface following the cutting process using mini PC-based CNC milling

Open the PDF for in another window

Free vibration characteristics of jute fibre reinforced composite for the determination of material properties: Numerical and experimental studies

Muhammad Rizal; Amir Zaki Mubarak; Asbar Razali; Muhammad Asyraf

AIP Conf. Proc. 2187, 050020 (2019) https://doi.org/10.1063/1.5138350

Abstract

View articletitled, Free vibration characteristics of jute fibre reinforced composite for the determination of material properties: Numerical and experimental studies

Open the PDF for in another window

The effect of surface contact on the pressure distribution and deflection of airless tires

Rachmat Sriwijaya; Reodhy Hamzah

AIP Conf. Proc. 2187, 050021 (2019) https://doi.org/10.1063/1.5138351

Abstract

View articletitled, The effect of surface contact on the pressure distribution and deflection of airless tires

Open the PDF for in another window

Biomechanical analysis of correction force and Cobb angle in a simple model of scoliotic spine fixation

Meifal Rusli; Nofri Kurnia Putra; Hendery Dahlan; Roni Eka Sahputra

AIP Conf. Proc. 2187, 050022 (2019) https://doi.org/10.1063/1.5138352

Abstract

View articletitled, Biomechanical analysis of correction force and Cobb angle in a simple model of scoliotic spine fixation

Open the PDF for in another window

Analytical and experimental study of translational vibration response’s reduction on aluminum (Al) drilling process using translational mass vibration absorber (TMVA) system

Wiwiek Hendrowati; Harus Laksana Guntur; Aida Annisa Amin Daman; Heny Lestari

AIP Conf. Proc. 2187, 050023 (2019) https://doi.org/10.1063/1.5138353

Abstract

View articletitled, Analytical and experimental study of translational vibration response’s reduction on aluminum (Al) drilling process using translational mass vibration absorber (TMVA) system

Open the PDF for in another window

Optimum value analysis of vibration response reduction in translational, rolling, and pitching direction of the primary system and voltage generation by cantilever piezoelectric vibration absorber (CPVA) mechanism

Wiwiek Hendrowati; Harus Laksana Guntur; Aida Annisa Amin Daman; Azmi Maulana Firdaus

AIP Conf. Proc. 2187, 050024 (2019) https://doi.org/10.1063/1.5138354

Abstract

View articletitled, Optimum value analysis of vibration response reduction in translational, rolling, and pitching direction of the primary system and voltage generation by cantilever piezoelectric vibration absorber (CPVA) mechanism

Open the PDF for in another window

Radial vibration damper (RVD) mechanism validation for long thin shaft at lathe machine

Wiwiek Hendrowati; Harus Laksana Guntur; Aida Annisa Amin Daman; Devinda Anggitasari

AIP Conf. Proc. 2187, 050025 (2019) https://doi.org/10.1063/1.5138355

Abstract

View articletitled, Radial vibration damper (RVD) mechanism validation for long thin shaft at lathe machine

Open the PDF for in another window

Hydro-regenerative shock absorber with two generators in series for vehicle suspension

Harus Laksana Guntur; Wiwiek Hendrowati; Aida Annisa Amin Daman

AIP Conf. Proc. 2187, 050026 (2019) https://doi.org/10.1063/1.5138356

Abstract

View articletitled, Hydro-regenerative shock absorber with two generators in series for vehicle suspension

Open the PDF for in another window

The effect of tuned mass damper to the vibration of wind turbine structure model

Harus Laksana Guntur; Wiwiek Hendrowati; Aida Daman; Auliana Diah Wilujeng

AIP Conf. Proc. 2187, 050027 (2019) https://doi.org/10.1063/1.5138357

Abstract

View articletitled, The effect of tuned mass damper to the vibration of wind turbine structure model

Open the PDF for in another window

Influence of specimen geometry to the tensile property of 316L stainless steel: Study case on raw material of stents

Achmad Syaifudin; Julendra B. Ariatedja

AIP Conf. Proc. 2187, 050028 (2019) https://doi.org/10.1063/1.5138358

Abstract

View articletitled, Influence of specimen geometry to the tensile property of 316L stainless steel: Study case on raw material of stents

Open the PDF for in another window

Girder extension effect on earthquake resilience of ship unloader crane: A numerical study

Suwarno; Achmad Syaifudin

AIP Conf. Proc. 2187, 050029 (2019) https://doi.org/10.1063/1.5138359

Abstract

View articletitled, Girder extension effect on earthquake resilience of ship unloader crane: A numerical study

Open the PDF for in another window

Plug and play manhole kit holder for storage tank: A comprehensive design analysis

Hanung Kurniawan; Nurhasan Fitriyadi; Puspito Nikho Arfian; Mohammad Rais Alfiansyah Taufiq; Akmal Irfan Majid; Satria Mahardhika Wisambodhi

AIP Conf. Proc. 2187, 050030 (2019) https://doi.org/10.1063/1.5138360

Abstract

View articletitled, Plug and play manhole kit holder for storage tank: A comprehensive design analysis

Open the PDF for in another window

Ball bearing fault diagnosis using wavelet transform and principal component analysis

Berli Paripurna Kamiel; Ian Howard

AIP Conf. Proc. 2187, 050031 (2019) https://doi.org/10.1063/1.5138361

Abstract

View articletitled, Ball bearing fault diagnosis using wavelet transform and principal component analysis

Open the PDF for in another window

MECHATRONICS AND CONTROL SYSTEM

Earthquake waveform data conversion using Seisan and Seizmo for magnitude study comparison

Anta Senaputra; Adlina Syamlan; Bambang Pramujati

AIP Conf. Proc. 2187, 060001 (2019) https://doi.org/10.1063/1.5138362

Abstract

View articletitled, Earthquake waveform data conversion using Seisan and Seizmo for magnitude study comparison

Open the PDF for in another window

Performance comparison of BLDC motor controllers designed based on trapezoidal commutation and FOC

Agus Nurtriartono; Agus Mukhlisin; Muhammad Nur Yuniarto; Estiko Rijanto

AIP Conf. Proc. 2187, 060002 (2019) https://doi.org/10.1063/1.5138363

Abstract

View articletitled, Performance comparison of BLDC motor controllers designed based on trapezoidal commutation and FOC

Open the PDF for in another window

Towards an intelligent reconfigurable BLDC motor controller: Commutation configuration and parameters detection

Agus Mukhlisin; Estiko Rijanto; I. Nyoman Sutantra; Muhammad Nur Yuniarto; Agus Sigit Pramono

AIP Conf. Proc. 2187, 060003 (2019) https://doi.org/10.1063/1.5138364

Abstract

View articletitled, Towards an intelligent reconfigurable BLDC motor controller: Commutation configuration and parameters detection

Open the PDF for in another window

Short circuit study on closed circuit electrical system of ship dynamic positioning system based on laboratory scale experiment

Sardono Sarwito; Semin; M. Badrus Zaman; Soedibyo; Tangguh Setia Ramadhan

AIP Conf. Proc. 2187, 060004 (2019) https://doi.org/10.1063/1.5138365

Abstract

View articletitled, Short circuit study on closed circuit electrical system of ship dynamic positioning system based on laboratory scale experiment

Open the PDF for in another window

Design of sliding mode control for surge, heave and pitch motion control of UNUSAITS AUV

Hendro Nurhadi; Teguh Herlambang; Subchan

AIP Conf. Proc. 2187, 060005 (2019) https://doi.org/10.1063/1.5138366

Abstract

View articletitled, Design of sliding mode control for surge, heave and pitch motion control of UNUSAITS AUV

Open the PDF for in another window

Position estimation of Touristant ASV using ensemble Kalman filter

Hendro Nurhadi; Teguh Herlambang; Dieky Adzkiya

AIP Conf. Proc. 2187, 060006 (2019) https://doi.org/10.1063/1.5138367

Abstract

View articletitled, Position estimation of Touristant ASV using ensemble Kalman filter

Open the PDF for in another window

Dynamic analysis and control of gyroscopic inverted pendulum

Unggul Wasiwitono; Arif Wahjudi; Ari Kurniawan Saputra; Edwin Ramadhani Sampurna; I. Nyoman Sutantra

AIP Conf. Proc. 2187, 060007 (2019) https://doi.org/10.1063/1.5138368

Abstract

View articletitled, Dynamic analysis and control of gyroscopic inverted pendulum

Open the PDF for in another window

Issues

Cover Image

PRELIMINARY

ENERGY, HEAT TRANSFER AND FLUID FLOW

MANUFACTURING

MATERIAL AND METALLURGY

MECHANICAL STRUCTURE, DESIGN AND VIBRATION

MECHATRONICS AND CONTROL SYSTEM

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only