Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
The effect of mechanical activation of nitinol powder on the interaction with hydrogen
AIP Conf. Proc. 2167, 020003 (2019)
https://doi.org/10.1063/1.5131870
Numerical simulation of electromagnetic field propagation in heterogeneous material
AIP Conf. Proc. 2167, 020008 (2019)
https://doi.org/10.1063/1.5131875
Risks of pollution of Arctic territories by oil and oil products
AIP Conf. Proc. 2167, 020009 (2019)
https://doi.org/10.1063/1.5131876
Ecological risks of the impact of associated gas flaring on the environment
AIP Conf. Proc. 2167, 020010 (2019)
https://doi.org/10.1063/1.5131877
Deformed microstructure of ferritic-martensitic steel EK-181
AIP Conf. Proc. 2167, 020014 (2019)
https://doi.org/10.1063/1.5131881
Nanostructured gels and sols for physicochemical and complex technologies intended to enhance oil recovery
AIP Conf. Proc. 2167, 020015 (2019)
https://doi.org/10.1063/1.5131882
Butt friction stir welding of commercially pure titanium by the tool from a heat-resistant nickel alloy
AIP Conf. Proc. 2167, 020016 (2019)
https://doi.org/10.1063/1.5131883
Features of the technological process of thermoforming of products made of thermoplastic composite materials
AIP Conf. Proc. 2167, 020019 (2019)
https://doi.org/10.1063/1.5131886
The effect of solid-solution temperature on phase composition and tensile properties of vanadium-alloyed high interstitial steels
Sergey V. Astafurov; Galina G. Maier; Irina A. Tumbusova; Evgenii V. Melnikov; Valentina A. Moskvina; Marina Yu. Panchenko; Nina K. Galchenko; Elena G. Astafurova
AIP Conf. Proc. 2167, 020021 (2019)
https://doi.org/10.1063/1.5131888
The influence of oxygen and fluorine on the electronic structure of InAlAs surface
AIP Conf. Proc. 2167, 020026 (2019)
https://doi.org/10.1063/1.5131893
The influence of VB and VIB metals on the adhesion properties of Ti3Al/Al2O3 interface
AIP Conf. Proc. 2167, 020027 (2019)
https://doi.org/10.1063/1.5131894
Interrelation between the grain boundary energy and the packing density in α-Fe
AIP Conf. Proc. 2167, 020028 (2019)
https://doi.org/10.1063/1.5131895
A comparative analysis of plastic strain localization in aluminum single crystals and polycrystalline grains
AIP Conf. Proc. 2167, 020029 (2019)
https://doi.org/10.1063/1.5131896
Strain rate effect on the deformation and fracture in different zones of friction stir welded aluminum
AIP Conf. Proc. 2167, 020030 (2019)
https://doi.org/10.1063/1.5131897
Concentration and configurational dependence of the short-range order parameter in two-layer graphene
AIP Conf. Proc. 2167, 020033 (2019)
https://doi.org/10.1063/1.5131900
Investigation of the preparation process of seismic events with the help of seismic noise analysis
AIP Conf. Proc. 2167, 020034 (2019)
https://doi.org/10.1063/1.5131901
Formation of surface layers from highly entropic materials with shape memory effect
AIP Conf. Proc. 2167, 020035 (2019)
https://doi.org/10.1063/1.5131902
Calcium phosphate targets for RF magnetron sputtering of biocoatings
Anna A. Bolat-ool; Konstantin A. Prosolov; Margarita A. Khimich; Valentina V. Chebodaeva; Pavel V. Uvarkin; Alexey I. Tolmachev; Olga A. Belyavskaya; Yurii P. Sharkeev
AIP Conf. Proc. 2167, 020036 (2019)
https://doi.org/10.1063/1.5131903
The influence of SPD on the Portevin-Le Chatelier effect in an AlMgMnZr alloy
AIP Conf. Proc. 2167, 020037 (2019)
https://doi.org/10.1063/1.5131904
The study of the structural phase state and properties of impact resistant Zr-Y-O coatings systems on Si substrates
AIP Conf. Proc. 2167, 020038 (2019)
https://doi.org/10.1063/1.5131905
Electron beam additive manufacturing of TiCx/Ti-6Al-4V composite
AIP Conf. Proc. 2167, 020039 (2019)
https://doi.org/10.1063/1.5131906
Static fracture behavior of ultrasonic impact post-built treated SLM-manufactured Ti-6Al-4V
AIP Conf. Proc. 2167, 020041 (2019)
https://doi.org/10.1063/1.5131908
Self-healing in high temperature ZrB2-SiC ceramics
AIP Conf. Proc. 2167, 020042 (2019)
https://doi.org/10.1063/1.5131909
Flux-cored wire for additive manufacturing of parts with gradient structure
AIP Conf. Proc. 2167, 020043 (2019)
https://doi.org/10.1063/1.5131910
Implementation of the Cook–Gordon mechanism in Y-TZP based ceramics
AIP Conf. Proc. 2167, 020046 (2019)
https://doi.org/10.1063/1.5131913
Towards a theory of flow stress in multimodal polycrystalline aggregates. Effects of dispersion hardening
AIP Conf. Proc. 2167, 020047 (2019)
https://doi.org/10.1063/1.5131914
Influence of metal based nanoparticles on properties of micro-arc calcium phosphate coatings
AIP Conf. Proc. 2167, 020049 (2019)
https://doi.org/10.1063/1.5131916
Deformation laws on the interface of elastic solids under perfect contact and slip boundary conditions
AIP Conf. Proc. 2167, 020052 (2019)
https://doi.org/10.1063/1.5131919
Composition of asphaltenes of heavy oil residues from the Usinskoye oil field
AIP Conf. Proc. 2167, 020054 (2019)
https://doi.org/10.1063/1.5131921
Medical polyurethane with improved biocompatibility treated by the ion implantation method
V. S. Chudinov; I. N. Shardakov; V. V. Maslova; S. Y. Solodnikov; I. V. Fefilova; V. V. Litvinov; G. G. Freind; E. Y. Chudinova; A. V. Kondyurin
AIP Conf. Proc. 2167, 020055 (2019)
https://doi.org/10.1063/1.5131922
Features of composition of produced oils and residual heavy crude oils sampled of the Usinskoye oil field
AIP Conf. Proc. 2167, 020056 (2019)
https://doi.org/10.1063/1.5131923
Defect formation in the process of copper-titanium polymetals manufacturing by an electron-beam method
AIP Conf. Proc. 2167, 020057 (2019)
https://doi.org/10.1063/1.5131924
Formation of defects during additive manufacturing of Cu-Al polymetallic samples
AIP Conf. Proc. 2167, 020058 (2019)
https://doi.org/10.1063/1.5131925
Formation of layered metallic materials by hybrid additive-thermomechanical method
AIP Conf. Proc. 2167, 020063 (2019)
https://doi.org/10.1063/1.5131930
Shape memory effect and superelasticity in high-strength FeNiCoAlTi single crystals hardened by nanoparticles
Yuriy Chumlyakov; Irina Kireeva; Irina Kuksgauzen; Vyacheslav Poklonov; Zinaida Pobedennaya; Irina Bessonova; Dmitriy Kuksgauzen; Vladimir Kirillov; Christian Lauhoff; Tomas Niendorf; Philipp Krooß
AIP Conf. Proc. 2167, 020064 (2019)
https://doi.org/10.1063/1.5131931
Localized plastic deformation autowaves under superelasticity
AIP Conf. Proc. 2167, 020065 (2019)
https://doi.org/10.1063/1.5131932
Self-healing in ZrB2-ZrC-SiC-ZrO2 ceramics
AIP Conf. Proc. 2167, 020067 (2019)
https://doi.org/10.1063/1.5131934
Microstructure and low temperature fracture of commercial low carbon pipe steel for modern gas pipelines
AIP Conf. Proc. 2167, 020068 (2019)
https://doi.org/10.1063/1.5131935
Specific features of acoustic emission of Ti alloys under plastic strain and fracture
AIP Conf. Proc. 2167, 020070 (2019)
https://doi.org/10.1063/1.5131937
Computer simulation of the strength processes of mechanically activated concrete mixtures
AIP Conf. Proc. 2167, 020072 (2019)
https://doi.org/10.1063/1.5131939
Regimes of adhesive wear in dry contact: Conditions of realization and determining parameters
AIP Conf. Proc. 2167, 020075 (2019)
https://doi.org/10.1063/1.5131942
Physical-mechanical properties of surface layers of NiTi alloy depending on the number of pulses of electron beam
AIP Conf. Proc. 2167, 020076 (2019)
https://doi.org/10.1063/1.5131943
Influence of axial force on the pure titanium surface relief during friction stir processing
AIP Conf. Proc. 2167, 020077 (2019)
https://doi.org/10.1063/1.5131944
Numerical study of the texture effect on plastic strain localization in polycrystalline titanium
AIP Conf. Proc. 2167, 020079 (2019)
https://doi.org/10.1063/1.5131946
Modeling the deformation behavior of titanium single crystals
AIP Conf. Proc. 2167, 020080 (2019)
https://doi.org/10.1063/1.5131947
The effect of a textured surface layer on the deformation behavior of polycrystalline titanium
AIP Conf. Proc. 2167, 020081 (2019)
https://doi.org/10.1063/1.5131948
Fatigue crack growth of SLM Ti-4Al-6V processed by ultrasonic impact treatment
AIP Conf. Proc. 2167, 020082 (2019)
https://doi.org/10.1063/1.5131949
Numerical analysis of fracture initiation and propagation in weak porous sandstones under multiaxial loading
AIP Conf. Proc. 2167, 020083 (2019)
https://doi.org/10.1063/1.5131950
Common regularities in failure of rocks, rock mass, and earth’s crust. Statistical analysis
AIP Conf. Proc. 2167, 020084 (2019)
https://doi.org/10.1063/1.5131951
Features of the blow-up mode at failure of alumina ceramics subjected to three-point bending
AIP Conf. Proc. 2167, 020085 (2019)
https://doi.org/10.1063/1.5131952
Features of the roof and floor fracture during mining of near coal beds of the Erunakovsky deposit
AIP Conf. Proc. 2167, 020086 (2019)
https://doi.org/10.1063/1.5131953
Numerical modeling of the mechanical behavior of hip resurfacing endoprosthesis and healthy bone
AIP Conf. Proc. 2167, 020087 (2019)
https://doi.org/10.1063/1.5131954
Numerical modeling of uniaxial compression of a fluid-saturated sample of TiN coating
AIP Conf. Proc. 2167, 020088 (2019)
https://doi.org/10.1063/1.5131955
Numerical modeling of wearing two rough surfaces of a biocompatible ceramic coating
AIP Conf. Proc. 2167, 020089 (2019)
https://doi.org/10.1063/1.5131956
Numerical modeling of the indentation of cancellous bone
AIP Conf. Proc. 2167, 020090 (2019)
https://doi.org/10.1063/1.5131957
Effect of feed speed on the quality of titanium-aluminum bimetal produced by friction stir welding
AIP Conf. Proc. 2167, 020091 (2019)
https://doi.org/10.1063/1.5131958
Numerical study of the influence of discharge wells on the stress–strain evolution in coal seam
AIP Conf. Proc. 2167, 020093 (2019)
https://doi.org/10.1063/1.5131960
Effect of oxidation on wear resistance of 3D-printed titanium alloy Ti-6Al-4V parts
AIP Conf. Proc. 2167, 020094 (2019)
https://doi.org/10.1063/1.5131961
Structural-phase state and mechanical properties of the surface layer of the copper modified by zirconium ions
AIP Conf. Proc. 2167, 020095 (2019)
https://doi.org/10.1063/1.5131962
Development of electron-beam equipment and technology for additive layer-wise wire cladding
AIP Conf. Proc. 2167, 020097 (2019)
https://doi.org/10.1063/1.5131964
Effect of tantalum on the tensile properties of 12%Cr martensitic steels for steam blades
AIP Conf. Proc. 2167, 020098 (2019)
https://doi.org/10.1063/1.5131965
Effect of oil-displacing composition based on surfactant on oxidation of highly viscous high-paraffin oil
AIP Conf. Proc. 2167, 020099 (2019)
https://doi.org/10.1063/1.5131966
Thermobaric studies of multifunctional composition based on surfactants
AIP Conf. Proc. 2167, 020100 (2019)
https://doi.org/10.1063/1.5131967
Indentation and scratch testing of coarse-grained and ultrafine-grained AA6063
AIP Conf. Proc. 2167, 020101 (2019)
https://doi.org/10.1063/1.5131968
Infrared thermography inspection of severe friction on UFG stainless steel, copper and aluminum alloy
AIP Conf. Proc. 2167, 020102 (2019)
https://doi.org/10.1063/1.5131969
Nanoindentation on coarse-grained (CG) and ultrafine-grained (UFG) C11000 grade copper
AIP Conf. Proc. 2167, 020103 (2019)
https://doi.org/10.1063/1.5131970
Polylactic acid properties after steam sterilization and possibility of its using as a corneal implant
AIP Conf. Proc. 2167, 020104 (2019)
https://doi.org/10.1063/1.5131971
Antimicrobial activity of CuFe2O4 nanoparticles obtained by electric explosion of Fe and Cu wires
AIP Conf. Proc. 2167, 020106 (2019)
https://doi.org/10.1063/1.5131973
Directional solidification features of nickel-based superalloy in the electron beam additive manufacturing process
AIP Conf. Proc. 2167, 020107 (2019)
https://doi.org/10.1063/1.5131974
Method for evaluation of rheological properties of viscoelastic cryogels
AIP Conf. Proc. 2167, 020108 (2019)
https://doi.org/10.1063/1.5131975
Nitrogen-containing bases of asphaltenes in the oil of the Usinskoye oilfield
AIP Conf. Proc. 2167, 020111 (2019)
https://doi.org/10.1063/1.5131978
Biocompatible Ti-Nb alloys produced via relativistic electron beam in air atmosphere
AIP Conf. Proc. 2167, 020113 (2019)
https://doi.org/10.1063/1.5131980
Changes in the composition of resins and asphaltenes of high-sulfur vacuum residues during the cracking process
AIP Conf. Proc. 2167, 020115 (2019)
https://doi.org/10.1063/1.5131982
Fracture incubation time and scale invariance of dynamic crack propagation in brittle solids
AIP Conf. Proc. 2167, 020116 (2019)
https://doi.org/10.1063/1.5131983
In-situ study of mechanical damage evolution of segmented ceramic using digital image correlation
AIP Conf. Proc. 2167, 020118 (2019)
https://doi.org/10.1063/1.5131985
Experimental study and multilevel modeling of effective properties of polyphenylene sulfide based 3-component composites
N. Yu. Grishaeva; S. V. Panin; S. A. Bochkareva; B. A. Lyukshin; I. L. Panov; E. I. Mukhortin; Le My Thi Hiep; V. O. Aleksenko
AIP Conf. Proc. 2167, 020122 (2019)
https://doi.org/10.1063/1.5131989
Obtaining of polymetallic samples of Cu-Fe and Cu-Al systems by additive electron-beam technology
AIP Conf. Proc. 2167, 020127 (2019)
https://doi.org/10.1063/1.5131994
Features of deformation and fracture of joints from 13Mn6 steel obtained by laser-arc hybrid welding
AIP Conf. Proc. 2167, 020128 (2019)
https://doi.org/10.1063/1.5131995
Tribological properties of copper-titanium polymetals obtained by the additive manufacturing
AIP Conf. Proc. 2167, 020129 (2019)
https://doi.org/10.1063/1.5131996
Cyclic strength of joints from SS 321 obtained by laser-arc hybrid welding
AIP Conf. Proc. 2167, 020130 (2019)
https://doi.org/10.1063/1.5131997
Defect formation in titanium samples obtained by electron beam additive manufacturing
AIP Conf. Proc. 2167, 020131 (2019)
https://doi.org/10.1063/1.5131998
Manufacturing of steel and titanium alloy samples by electron-beam additive technology
AIP Conf. Proc. 2167, 020135 (2019)
https://doi.org/10.1063/1.5132002
Mechanical properties and structure of VT6 alloy samples obtained by EBAM method
AIP Conf. Proc. 2167, 020136 (2019)
https://doi.org/10.1063/1.5132003
Regularities of defect formation at additive electron-beam manufacturing of polymetallic samples
AIP Conf. Proc. 2167, 020137 (2019)
https://doi.org/10.1063/1.5132004
Defects formation in the structure of samples obtained by the method of electron beam additive manufacturing
AIP Conf. Proc. 2167, 020138 (2019)
https://doi.org/10.1063/1.5132005
Multilevel hierarchical structure of silumin subjected to multicycle surface alloying
AIP Conf. Proc. 2167, 020141 (2019)
https://doi.org/10.1063/1.5132008
Deformation mode of water-saturated collector by precision hydrogeological monitoring
AIP Conf. Proc. 2167, 020142 (2019)
https://doi.org/10.1063/1.5132009
Study of structural features of monolithic TiNi-based alloy to produce porous monolithic structures
AIP Conf. Proc. 2167, 020143 (2019)
https://doi.org/10.1063/1.5132010
Surface morphology of Ti-alloy samples obtained by electron beam 3D-printing
AIP Conf. Proc. 2167, 020145 (2019)
https://doi.org/10.1063/1.5132012
Fracture characteristics of titanium alloy samples obtained by electron beam additive manufacturing
AIP Conf. Proc. 2167, 020147 (2019)
https://doi.org/10.1063/1.5132014
Accuracy of stainless steel products fabrication by additive electron-beam method
AIP Conf. Proc. 2167, 020148 (2019)
https://doi.org/10.1063/1.5132015
Structure formation during adhesive interaction under friction stir welding conditions
AIP Conf. Proc. 2167, 020151 (2019)
https://doi.org/10.1063/1.5132018
Effect of pre-strain rolling path on abnormal grain growth in friction-stir welded Al-Mg-Si alloy
AIP Conf. Proc. 2167, 020152 (2019)
https://doi.org/10.1063/1.5132019
Impact toughness of Ti–6Al–4V parts fabricated by additive manufacturing
AIP Conf. Proc. 2167, 020153 (2019)
https://doi.org/10.1063/1.5132020
Structural and morphological features of the ultrasound-assisted micro-arc oxidation coatings
AIP Conf. Proc. 2167, 020156 (2019)
https://doi.org/10.1063/1.5132023
The evolution of deformation structures of seam weld of stainless steel
AIP Conf. Proc. 2167, 020158 (2019)
https://doi.org/10.1063/1.5132025
Deformation and fracture of hypereutectic silumin samples with a surface modified with an intense pulsed electron beam
Anatoliy Klopotov; Yurii Ivanov; Dmitriy Zagulyaev; Artyom Ustinov; Elizaveta Petrikova; Anton Teresov; Mariya Rygina; Yuriy Abzaev; Aleksandr Potekaev; Oleg Volokitin; Yuriy Vlasov
AIP Conf. Proc. 2167, 020160 (2019)
https://doi.org/10.1063/1.5132027
Speckle structures of surface layer of Zr-1Nb alloy samples in micro- and ultrafine-grained states under deformation
Anatolii Klopotov; Yurii Sharkeev; Alexander Potekaev; Artem Ustinov; Elena Legostaeva; Olga Belyavskaya; Anna Eroshenko
AIP Conf. Proc. 2167, 020161 (2019)
https://doi.org/10.1063/1.5132028
Thermomechanical stresses in the transition zone of titanium nickelide with a coating from silicon and tantalum
AIP Conf. Proc. 2167, 020163 (2019)
https://doi.org/10.1063/1.5132030
Removal of sulfur compounds from diesel fuel using metal-containing ionic liquids
AIP Conf. Proc. 2167, 020164 (2019)
https://doi.org/10.1063/1.5132031
Formation of the hierarchical porous structure and surface morphology in the micro-arc calcium phosphate coatings
AIP Conf. Proc. 2167, 020167 (2019)
https://doi.org/10.1063/1.5132034
Production and properties of composite nanoparticles (CuxMe1–x)O
AIP Conf. Proc. 2167, 020168 (2019)
https://doi.org/10.1063/1.5132035
Thermal transformations of resin-asphaltene components of the oil residue
AIP Conf. Proc. 2167, 020170 (2019)
https://doi.org/10.1063/1.5132037
Effect of primary heavy oil processing on the composition and molecular structure of asphaltenes
AIP Conf. Proc. 2167, 020171 (2019)
https://doi.org/10.1063/1.5132038
Influence of heat treatment on the structure and properties of ZhS6U high-temperature nickel-based alloy
AIP Conf. Proc. 2167, 020172 (2019)
https://doi.org/10.1063/1.5132039
Studying of the strength characteristics of the ZTA composites during fatigue loading
AIP Conf. Proc. 2167, 020173 (2019)
https://doi.org/10.1063/1.5132040
The use of high-resolution x-ray computer tomography to control the microstructure of the B4C
AIP Conf. Proc. 2167, 020174 (2019)
https://doi.org/10.1063/1.5132041
Reokinetics of phase transformations of oil and gel-forming systems
AIP Conf. Proc. 2167, 020175 (2019)
https://doi.org/10.1063/1.5132042
Low temperature nanostructured gelling compositions for water shut-off purposes
AIP Conf. Proc. 2167, 020176 (2019)
https://doi.org/10.1063/1.5132043
Effect of pulse arc facing parameters with electrode wire pre-heating upon the beads formation
AIP Conf. Proc. 2167, 020177 (2019)
https://doi.org/10.1063/1.5132044
Features changes in dynamic characteristics of composites in relation to the number of layers and their laying
AIP Conf. Proc. 2167, 020178 (2019)
https://doi.org/10.1063/1.5132045
Study of the properties and features of the composition of the oils of the northern territories of Western Siberia
AIP Conf. Proc. 2167, 020180 (2019)
https://doi.org/10.1063/1.5132047
Investigation of composite coatings based on the intermetallic matrix Ni3Al with refractory WC inclusions
AIP Conf. Proc. 2167, 020185 (2019)
https://doi.org/10.1063/1.5132052
Electrochemical corrosion of cryorolled and aged aluminum alloy
AIP Conf. Proc. 2167, 020186 (2019)
https://doi.org/10.1063/1.5132053
Atomic mechanisms of plasticity nucleation and development in nanocrystalline Ni
AIP Conf. Proc. 2167, 020187 (2019)
https://doi.org/10.1063/1.5132054
Influence of liquid n-alkane on the removal of hydrogen sulfide from methane in the barrier discharge
AIP Conf. Proc. 2167, 020188 (2019)
https://doi.org/10.1063/1.5132055
Ultrasonic agglomeration-fragmentation of diamond nanoparticles
AIP Conf. Proc. 2167, 020189 (2019)
https://doi.org/10.1063/1.5132056
Microstructure and mechanical properties of the aluminum-zirconium tungstate composite
AIP Conf. Proc. 2167, 020191 (2019)
https://doi.org/10.1063/1.5132058
Microstructure of porous ceramics sintered at different temperatures
AIP Conf. Proc. 2167, 020192 (2019)
https://doi.org/10.1063/1.5132059
The calculation of the temperature dependent diffusion coefficient: The first principles approach
AIP Conf. Proc. 2167, 020193 (2019)
https://doi.org/10.1063/1.5132060
Field experience of chemical IOR/EOR at Permian-Carboniferous deposit of Usinsk oilfield
AIP Conf. Proc. 2167, 020194 (2019)
https://doi.org/10.1063/1.5132061
Finite deformation analysis of a prestressed elastic beam after the layer addition
AIP Conf. Proc. 2167, 020195 (2019)
https://doi.org/10.1063/1.5132062
Study of the structural inhomogeneity of bimetal layers at the yield plateau stage
AIP Conf. Proc. 2167, 020196 (2019)
https://doi.org/10.1063/1.5132063
Interatomic potential for the simulation of diffusion processes in tungsten
AIP Conf. Proc. 2167, 020197 (2019)
https://doi.org/10.1063/1.5132064
Application of hierarchical nanostructured aluminum oxyhydroxide for bleeding control
AIP Conf. Proc. 2167, 020199 (2019)
https://doi.org/10.1063/1.5132066
Adsorption on the surface of AlOOH nanostructures immobilized on polymer fibers in dynamic conditions
AIP Conf. Proc. 2167, 020200 (2019)
https://doi.org/10.1063/1.5132067
Features of plastic deformations of quartz-pyrite mineral associations of the Gabriel mine
AIP Conf. Proc. 2167, 020202 (2019)
https://doi.org/10.1063/1.5132069
Patterns of stability loss of thermal barrier coating at intensive heat impact
AIP Conf. Proc. 2167, 020203 (2019)
https://doi.org/10.1063/1.5132070
Thermodynamic parameters of shock wave loading of carbides with various stoichiometric compositions
AIP Conf. Proc. 2167, 020204 (2019)
https://doi.org/10.1063/1.5132071
Mechanisms of mesoscopic fracture of TiNi-TiB2 metal-ceramic composite
AIP Conf. Proc. 2167, 020209 (2019)
https://doi.org/10.1063/1.5132076
Evolution of views on the physical nature of slow deformation disturbances in geomediums
AIP Conf. Proc. 2167, 020212 (2019)
https://doi.org/10.1063/1.5132079
Construction of interatomic potentials of V-W on the basis of CALPHAD data on the formation enthalpy
AIP Conf. Proc. 2167, 020213 (2019)
https://doi.org/10.1063/1.5132080
Bone-like multilevel calcium phosphate coating modulates an interaction of mesenchymal stem cells and tumor cells
V. V. Malashchenko; E. O. Shunkin; V. V. Shupletsova; O. G. Khaziakhmatova; K. A. Yurova; E. S. Melashchenko; L. S. Litvinova; I. A. Khlusov; E. G. Komarova; V. V. Chebodaeva; Yu. P. Sharkeev
AIP Conf. Proc. 2167, 020215 (2019)
https://doi.org/10.1063/1.5132082
On the determination of graphene edge chirality via Raman spectroscopy
AIP Conf. Proc. 2167, 020218 (2019)
https://doi.org/10.1063/1.5132085
Structure and property observations for Ti-Al-Cr intermetallic coatings
AIP Conf. Proc. 2167, 020220 (2019)
https://doi.org/10.1063/1.5132087
Catalysts for hydrodesulfurization prepared by the mechanical activation of molybdenite under cryogenic conditions
Elena V. Mikubaeva; Mikhail A. Uyimin; Vladislav V. Maykov; Sergey P. Zhuravkov; Lyubov A. Stasieva; Alexander V. Vosmerikov; Igor P. Prosvirin; Taisia A. Fedushchak
AIP Conf. Proc. 2167, 020222 (2019)
https://doi.org/10.1063/1.5132089
Numerical investigation of the influence of governing parameters on the features of slow deformation autowaves
AIP Conf. Proc. 2167, 020223 (2019)
https://doi.org/10.1063/1.5132090
Hurst exponent-based analysis of the behavior of filled polymers in aggressive media
AIP Conf. Proc. 2167, 020224 (2019)
https://doi.org/10.1063/1.5132091
Influence of friction stir processing on the structure and phase state of TiNi alloys
AIP Conf. Proc. 2167, 020226 (2019)
https://doi.org/10.1063/1.5132093
Obtaining of heteromodulus ZrC-based composite materials, their structure and properties
AIP Conf. Proc. 2167, 020227 (2019)
https://doi.org/10.1063/1.5132094
Multilayered thermal-protective HfC-ZrB2-SiC-ZrO2 ceramic material
AIP Conf. Proc. 2167, 020228 (2019)
https://doi.org/10.1063/1.5132095
Investigation of the effect of structural and phase state of the ZrO2 ceramics on thermal shock resistance
AIP Conf. Proc. 2167, 020229 (2019)
https://doi.org/10.1063/1.5132096
Effect of short-term aging on the impact toughness of advanced 10% Cr steel
AIP Conf. Proc. 2167, 020231 (2019)
https://doi.org/10.1063/1.5132098
Effect of the strain rate on the low cycle fatigue behavior of a 10Cr-2W-Mo-3Co-NbV steel at room temperature
AIP Conf. Proc. 2167, 020232 (2019)
https://doi.org/10.1063/1.5132099
A comparative study of the macroscopical and microscopical fracture mechanisms in cast and additively manufactured austenitic stainless steels
Valentina A. Moskvina; Marina Yu. Panchenko; Sergey V. Astafurov; Galina G. Maier; Evgenii V. Melnikov; Valery E. Rubtsov; Evgenii A. Kolubaev; Elena G. Astafurova
AIP Conf. Proc. 2167, 020234 (2019)
https://doi.org/10.1063/1.5132101
Effect of high-molecular components on the process of oil dewaxing with liquefied gas
AIP Conf. Proc. 2167, 020235 (2019)
https://doi.org/10.1063/1.5132102
Convective and diffusion conditions of a biological fluid flowing through a porous cylinder wall
AIP Conf. Proc. 2167, 020240 (2019)
https://doi.org/10.1063/1.5132107
Structural changes in the near-surface region as a result of LEHCPEB impact near the TiNi melting threshold
AIP Conf. Proc. 2167, 020241 (2019)
https://doi.org/10.1063/1.5132108
Effect of heat treatment on structure and mechanical properties of 12Cr-3Co steel with low N and high B contents
AIP Conf. Proc. 2167, 020242 (2019)
https://doi.org/10.1063/1.5132109
Influence of implantation on the grain size and structural-phase state of UFG-titanium
AIP Conf. Proc. 2167, 020243 (2019)
https://doi.org/10.1063/1.5132110
Investigation of acoustic emission produced during processing by sliding indenter: Molecular dynamics study
AIP Conf. Proc. 2167, 020246 (2019)
https://doi.org/10.1063/1.5132113
Molecular dynamic investigation of acoustic emission during mechanical treatment
AIP Conf. Proc. 2167, 020247 (2019)
https://doi.org/10.1063/1.5132114
Molecular dynamics simulation of polycrystalline metal surface treatment
AIP Conf. Proc. 2167, 020248 (2019)
https://doi.org/10.1063/1.5132115
The influence of polishing parameters on acoustic emission: Molecular dynamics study
AIP Conf. Proc. 2167, 020249 (2019)
https://doi.org/10.1063/1.5132116
Autowave and acoustic characteristics of low-carbon steel 1008 at loading
AIP Conf. Proc. 2167, 020252 (2019)
https://doi.org/10.1063/1.5132119
Thermal stability of microstructure and microhardness of Ni3Al samples with different duration of preliminary mechanical activation
Denis A. Osipov; Ivan V. Smirnov; Konstantin V. Grinyaev; Vladlen V. Melnikov; Mikhail A. Korchagin; Ivan A. Ditenberg
AIP Conf. Proc. 2167, 020253 (2019)
https://doi.org/10.1063/1.5132120
Microstructure of the 321 stainless steel samples obtained by electron-beam 3D-printing
AIP Conf. Proc. 2167, 020254 (2019)
https://doi.org/10.1063/1.5132121
Mechanical properties of 321 stainless steel samples obtained by electron-beam additive manufacturing
AIP Conf. Proc. 2167, 020255 (2019)
https://doi.org/10.1063/1.5132122
X-ray diffraction method for quantitative estimation of elastic modulus in materials with gradient structure
AIP Conf. Proc. 2167, 020257 (2019)
https://doi.org/10.1063/1.5132124
Corrosion properties of a Ti-15Mo/TiB composite produced by spark plasma sintering
AIP Conf. Proc. 2167, 020260 (2019)
https://doi.org/10.1063/1.5132127
Microstructural inhomogeneity of phase composition and grain structure in electron beam wire-feed additive manufactured AISI 304 stainless steel
Marina Yu. Panchenko; Galina G. Maier; Valentina A. Moskvina; Evgenii V. Melnikov; Sergey V. Astafurov; Valery E. Rubtsov; Evgenii A. Kolubaev; Elena G. Astafurova
AIP Conf. Proc. 2167, 020261 (2019)
https://doi.org/10.1063/1.5132128
On the influence of post-built heat treatment on strength and ductility of AISI 304 steel produced by electron-beam additive technology
Marina Yu. Panchenko; Valentina A. Moskvina; Sergey V. Astafurov; Galina G. Maier; Evgenii V. Melnikov; Valery E. Rubtsov; Evgenii A. Kolubaev; Elena G. Astafurova
AIP Conf. Proc. 2167, 020262 (2019)
https://doi.org/10.1063/1.5132129
Electron beam additive manufacturing of TiB2/Ti–6Al–4V composite
AIP Conf. Proc. 2167, 020263 (2019)
https://doi.org/10.1063/1.5132130
Mechanical and tribotechnical properties of polyimide based solid lubricant composites
AIP Conf. Proc. 2167, 020266 (2019)
https://doi.org/10.1063/1.5132133
Multicomponent antifriction composites based on polyetheretherketone (PEEK) matrix
AIP Conf. Proc. 2167, 020267 (2019)
https://doi.org/10.1063/1.5132134
Effect of type and size of KH550 modified filler on mechanical and tribotechnical properties of UHMWPE composites
AIP Conf. Proc. 2167, 020268 (2019)
https://doi.org/10.1063/1.5132135
Investigation of resistance of asphaltenes of high paraffin oil to precipitation
AIP Conf. Proc. 2167, 020273 (2019)
https://doi.org/10.1063/1.5132140
Characteristics of products of thermal conversion of oil shales in supercritical benzene
AIP Conf. Proc. 2167, 020274 (2019)
https://doi.org/10.1063/1.5132141
Thermal transformations of deasphaltenized oil in the presence of butyl bromide
AIP Conf. Proc. 2167, 020275 (2019)
https://doi.org/10.1063/1.5132142
Research of conic shape SAS cells acoustic efficiency at various sound pressure levels
AIP Conf. Proc. 2167, 020276 (2019)
https://doi.org/10.1063/1.5132143
Features of the manifestation of macro- and meso-scopic structural levels on the surface of a long steel rod under compression deformation
A. S. Plyaskin; A. A. Klopotov; A. I. Potekaev; B. O. Koshko; A. M. Ustinov; O. G. Volokitin; G. I. Tayukin
AIP Conf. Proc. 2167, 020279 (2019)
https://doi.org/10.1063/1.5132146
Kinetics of thermo-oxidative degradation of polymer blends based on polylactide
AIP Conf. Proc. 2167, 020280 (2019)
https://doi.org/10.1063/1.5132147
Structure, phase transformation and superelasticity of nanocrystalline Ti-50.9 at. % Ni alloy
AIP Conf. Proc. 2167, 020281 (2019)
https://doi.org/10.1063/1.5132148
Electronic structure of multiwalled carbon nanotubes with impurities and defects
AIP Conf. Proc. 2167, 020282 (2019)
https://doi.org/10.1063/1.5132149
Optimizing technological parameters of drawing for Ti-6Al-4V filament manufacturing
AIP Conf. Proc. 2167, 020284 (2019)
https://doi.org/10.1063/1.5132151
Active bio contact mechanics: Concepts of active control of wear and growth of the cartilage in natural joints
AIP Conf. Proc. 2167, 020285 (2019)
https://doi.org/10.1063/1.5132152
Impact of thermochemical treatment on structure and phase state of austenitic alloy
AIP Conf. Proc. 2167, 020287 (2019)
https://doi.org/10.1063/1.5132154
Application of Ti-Al powder cathodes for vacuum-arc synthesis of nitride coatings
AIP Conf. Proc. 2167, 020288 (2019)
https://doi.org/10.1063/1.5132155
Structural transformations in air heated Al-Cr powder compacts
AIP Conf. Proc. 2167, 020289 (2019)
https://doi.org/10.1063/1.5132156
Heat treatment of the Ti-6Al-4V alloy manufactured by electron beam melting
AIP Conf. Proc. 2167, 020290 (2019)
https://doi.org/10.1063/1.5132157
On combined quantized and mechanical descriptions of the Chernov-Luders macroband of localized deformation
AIP Conf. Proc. 2167, 020292 (2019)
https://doi.org/10.1063/1.5132159
Study of the influence of structural features of intervertebral disk on its stress-strain state
AIP Conf. Proc. 2167, 020293 (2019)
https://doi.org/10.1063/1.5132160
Modeling of heat transfer in breast by modified Pennes equation
AIP Conf. Proc. 2167, 020294 (2019)
https://doi.org/10.1063/1.5132161
Effect of electron beam processing on structure of electroexplosion electroerosion-resistant ZnO-Ag coating
AIP Conf. Proc. 2167, 020295 (2019)
https://doi.org/10.1063/1.5132162
Numerical study of plastic strain localization in aluminum single crystals compressed along [001]-axis
AIP Conf. Proc. 2167, 020296 (2019)
https://doi.org/10.1063/1.5132163
Synthesis of nanoparticle-hydrogel composites based on crosslinked by Al ions poly(sodium acrylate), Fe2O3 and γ-AlOOH
K. V. Rubtsov; A. M. Kondranova; A. S. Lozhkomoev; S. O. Kazantsev; E. V. Mamonova; L. O. Gavrilova; M. A. Sadovoy
AIP Conf. Proc. 2167, 020298 (2019)
https://doi.org/10.1063/1.5132165
Effect of emissions of oil refineries on the composition of organic components of snow and soil covers
AIP Conf. Proc. 2167, 020299 (2019)
https://doi.org/10.1063/1.5132166
Investigation of the strain inhomogeneity of ZrO2-(Y2O3) during Brazilian test
AIP Conf. Proc. 2167, 020302 (2019)
https://doi.org/10.1063/1.5132169
Atomic force microscopy of deformation relief in ZrO2 (Y2O3) ceramics
AIP Conf. Proc. 2167, 020303 (2019)
https://doi.org/10.1063/1.5132170
Kinetics of structural transformation in an adhesive layer during creation of 3D objects in LOM technology
AIP Conf. Proc. 2167, 020304 (2019)
https://doi.org/10.1063/1.5132171
Combined Rayleigh–Taylor–Kelvin–Helmholtz instability and its role in the formation of the surface relief of the coating/substrate
Vladimir D. Sarychev; Sergey A. Nevskii; Alexei Y. Granovskii; Sergey V. Konovalov; Victor E. Gromov
AIP Conf. Proc. 2167, 020307 (2019)
https://doi.org/10.1063/1.5132174
Ceramics structural features of the friction surface of ZrO2-Y2O3 ceramics after high-speed sliding on steel
AIP Conf. Proc. 2167, 020308 (2019)
https://doi.org/10.1063/1.5132175
Modification of the column structure of wire-feed electron-beam additive manufactured Ti-6Al-4V alloy
AIP Conf. Proc. 2167, 020309 (2019)
https://doi.org/10.1063/1.5132176
Structure and phase composition of Ti-6Al-4V alloy made by additive manufacturing technology
AIP Conf. Proc. 2167, 020310 (2019)
https://doi.org/10.1063/1.5132177
Characterization of deformation and damage process of alumina-based ceramics by DIC technique
AIP Conf. Proc. 2167, 020312 (2019)
https://doi.org/10.1063/1.5132179
Influence of porosity on the structural-phase state of ZrO2-Y2O3 ceramics
AIP Conf. Proc. 2167, 020313 (2019)
https://doi.org/10.1063/1.5132180
State equations for oil & gas pipelines subjected to bending strain and other forces
AIP Conf. Proc. 2167, 020315 (2019)
https://doi.org/10.1063/1.5132182
Revisiting the oil capacity of high-moor peat of the Northern Russia
AIP Conf. Proc. 2167, 020316 (2019)
https://doi.org/10.1063/1.5132183
Numerical simulation of deformation and fracture in polycrystalline aluminum at different strain rates
AIP Conf. Proc. 2167, 020318 (2019)
https://doi.org/10.1063/1.5132185
Simulation for fracture behavior of polycrystalline aluminum under dynamic loading
AIP Conf. Proc. 2167, 020319 (2019)
https://doi.org/10.1063/1.5132186
The influence of constraint loading conditions on deformation and fracture of polycrystals
AIP Conf. Proc. 2167, 020320 (2019)
https://doi.org/10.1063/1.5132187
Biodegradable poly(ε-caprolactone) VEGF-containing vascular patches for angioplasty
V. V. Sevostianova; A. V. Mironov; E. O. Krivkina; M. V. Khanova; E. A. Velikanova; V. G. Matveeva; T. V. Glushkova; L. V. Antonova; L. S. Barbarash
AIP Conf. Proc. 2167, 020321 (2019)
https://doi.org/10.1063/1.5132188
Investigation of inhomogeneity of mechanical properties of Al-Mg alloy printed by electron-beam method
AIP Conf. Proc. 2167, 020323 (2019)
https://doi.org/10.1063/1.5132190
Regularities in accumulation and dissipation of energy under tension in Ti and Zr-1Nb alloys in coarse-grained and ultrafine-grained states
Yurii Sharkeev; Elena Legostaeva; Vladimir Vavilov; Vladimir A. Skripnyak; Olga Belyavskaya; Arsenii Chulkov; Alexander Kozulin; Vladimir V. Skripnyak; Anna Eroshenko
AIP Conf. Proc. 2167, 020325 (2019)
https://doi.org/10.1063/1.5132192
Effect of friction stir welding on the structure and mechanical properties of the CoCrFeNiMn-0.9%C alloy
AIP Conf. Proc. 2167, 020326 (2019)
https://doi.org/10.1063/1.5132193
Numerical approach to computer simulation of landslide events
AIP Conf. Proc. 2167, 020329 (2019)
https://doi.org/10.1063/1.5132196
On structural and mechanical properties of AISI 1045 steel under cyclic loading
AIP Conf. Proc. 2167, 020330 (2019)
https://doi.org/10.1063/1.5132197
The effect of microstructure on a beryllium bronze wear
AIP Conf. Proc. 2167, 020338 (2019)
https://doi.org/10.1063/1.5132205
Nanostructuring of amorphous metal film initiated by the millisecond thermal pulse
AIP Conf. Proc. 2167, 020339 (2019)
https://doi.org/10.1063/1.5132206
Impact of modulated current welding on structural-phase state of 0.12 C-18Cr-10Ni-1 Ti-Fe austenitic steel
AIP Conf. Proc. 2167, 020340 (2019)
https://doi.org/10.1063/1.5132207
Influence of deformation degree on defect structure of disperse strengthened V–Cr–W–ZrO2 alloy
AIP Conf. Proc. 2167, 020341 (2019)
https://doi.org/10.1063/1.5132208
The effects of high-energy influence on the structure and fatigue life of VT6 titanium alloy and its welded joint
AIP Conf. Proc. 2167, 020342 (2019)
https://doi.org/10.1063/1.5132209
Modern methods for describing pore structure of porous materials: A review
AIP Conf. Proc. 2167, 020343 (2019)
https://doi.org/10.1063/1.5132210
Role of the mesoscopic rotation modes of deformation in formation of macroscopic stress–strain curves
AIP Conf. Proc. 2167, 020344 (2019)
https://doi.org/10.1063/1.5132211
Changes in composition of produced heavy oil after application of complex EOR technologies
AIP Conf. Proc. 2167, 020347 (2019)
https://doi.org/10.1063/1.5132214
Effect of sphericity on the evaluation of the stress-strain state in the earth’s crust
AIP Conf. Proc. 2167, 020348 (2019)
https://doi.org/10.1063/1.5132215
Effect of nonlinear elasticity on loading diagrams of rock specimens
AIP Conf. Proc. 2167, 020349 (2019)
https://doi.org/10.1063/1.5132216
Crack under the influence of internal pressure in elastoplastic media in the earth’s crust
AIP Conf. Proc. 2167, 020350 (2019)
https://doi.org/10.1063/1.5132217
Micro- and mesoporous zeolites for methane dehydroaromatization and Mo-containing catalysts based on them
AIP Conf. Proc. 2167, 020351 (2019)
https://doi.org/10.1063/1.5132218
Effect of pulsed electron beam exposure on the creep of the Zr–Nb–H system alloy
AIP Conf. Proc. 2167, 020352 (2019)
https://doi.org/10.1063/1.5132219
Biodestructive processes in oil-contaminated clayey soil
AIP Conf. Proc. 2167, 020354 (2019)
https://doi.org/10.1063/1.5132221
Mechanisms of deformation of austenitic stainless steel at cold rolling
AIP Conf. Proc. 2167, 020356 (2019)
https://doi.org/10.1063/1.5132223
Biodestruction of hierarchical organized oil structures in conditions of watered oil layer
AIP Conf. Proc. 2167, 020358 (2019)
https://doi.org/10.1063/1.5132225
Biodegradation of hydrocarbons in the oil-polluted biocoenoses of Mongolia
AIP Conf. Proc. 2167, 020359 (2019)
https://doi.org/10.1063/1.5132226
Effect of conditions of cracking of heavy crude oils on a composition of products
AIP Conf. Proc. 2167, 020360 (2019)
https://doi.org/10.1063/1.5132227
Catalytic cracking of a heavy oil in the presence of WC/Ni-Cr powder
AIP Conf. Proc. 2167, 020361 (2019)
https://doi.org/10.1063/1.5132228
Deformation behavior of Cu-1.5Co-3Al single crystals during sliding friction
AIP Conf. Proc. 2167, 020362 (2019)
https://doi.org/10.1063/1.5132229
Effect of binder composition on properties of 316L stainless steel bimodal powder feedstock
AIP Conf. Proc. 2167, 020365 (2019)
https://doi.org/10.1063/1.5132232
Estimation of the elastic modulus of rocks under uniaxial tension using the Brazilian test data
AIP Conf. Proc. 2167, 020369 (2019)
https://doi.org/10.1063/1.5132236
Steered molecular dynamics of serotonin adsorption by AlOOH and Fe(OH)2 nanosheets
AIP Conf. Proc. 2167, 020371 (2019)
https://doi.org/10.1063/1.5132238
Molecular dynamics of water and ions filtration through rectangular nanopores in boron nitride nanosheets
AIP Conf. Proc. 2167, 020372 (2019)
https://doi.org/10.1063/1.5132239
Vibration monitoring of crack nucleation in reinforced concrete structures
AIP Conf. Proc. 2167, 020373 (2019)
https://doi.org/10.1063/1.5132240
Modeling of the deformation processes from single crystal alloy VZHM8 at shock loads
AIP Conf. Proc. 2167, 020374 (2019)
https://doi.org/10.1063/1.5132241
Deformation process of argillite samples with joints under three-stage direct shear
AIP Conf. Proc. 2167, 020376 (2019)
https://doi.org/10.1063/1.5132243
Microstructure and microhardness of wire-feed electron-beam additive manufactured Ti-Al thin-walled elements
AIP Conf. Proc. 2167, 020377 (2019)
https://doi.org/10.1063/1.5132244
Electrochemical impedance study of corrosion properties of AA 5356 3D-printed by electron beam melting
AIP Conf. Proc. 2167, 020379 (2019)
https://doi.org/10.1063/1.5132246
Coalescence of detonation carbon with ultrasonic irradiation in the cavitational mode
AIP Conf. Proc. 2167, 020382 (2019)
https://doi.org/10.1063/1.5132249
Laser-arc hybrid welding of 321 stainless steel: Structure and microhardness of weld metal
AIP Conf. Proc. 2167, 020386 (2019)
https://doi.org/10.1063/1.5132253
Features of structure and mechanical properties of laser-arc hybrid welded 321 stainless steel
AIP Conf. Proc. 2167, 020387 (2019)
https://doi.org/10.1063/1.5132254
The effect of thermal oxidation on biodegradation of isotactic polypropylene, polyamide 6/66-4 and their mixtures
AIP Conf. Proc. 2167, 020388 (2019)
https://doi.org/10.1063/1.5132255
Properties of product from aluminum-magnesium alloy obtained by electron-beam additive manufacturing
AIP Conf. Proc. 2167, 020389 (2019)
https://doi.org/10.1063/1.5132256
Electron-beam additive manufacturing of product from Al-Mg alloy: Macrostructure and x-ray analysis
AIP Conf. Proc. 2167, 020390 (2019)
https://doi.org/10.1063/1.5132257
Tensile behavior of friction stir welded Al-Mg-Si alloy
AIP Conf. Proc. 2167, 020391 (2019)
https://doi.org/10.1063/1.5132258
Analysis of the regularities of change in the physico-chemical properties of oils depending on the depth
AIP Conf. Proc. 2167, 020393 (2019)
https://doi.org/10.1063/1.5132260
Composition of products of cracking of oxidized sulfur-containing vacuum gasoil components
AIP Conf. Proc. 2167, 020394 (2019)
https://doi.org/10.1063/1.5132261
Influence of the phase composition of Al-Mg alloys on the propagation of deformation bands
AIP Conf. Proc. 2167, 020395 (2019)
https://doi.org/10.1063/1.5132262
Analysis of changes in structure and microhardness of Al–11Si–2Cu alloy after complex treatment
AIP Conf. Proc. 2167, 020398 (2019)
https://doi.org/10.1063/1.5132265
Tribometer for vacuum friction test: Development and verification test
AIP Conf. Proc. 2167, 020402 (2019)
https://doi.org/10.1063/1.5132269
Ni-containing coatings formation by electron beam cladding and air-plasma spraying
AIP Conf. Proc. 2167, 020403 (2019)
https://doi.org/10.1063/1.5132270
The influence of the pore size and distribution on the mechanical properties of a brittle ceramic
AIP Conf. Proc. 2167, 020405 (2019)
https://doi.org/10.1063/1.5132272
Effects of grain size on surface roughening in deformed polycrystals
AIP Conf. Proc. 2167, 020406 (2019)
https://doi.org/10.1063/1.5132273
Numerical analysis of the grain morphology and texture in 316L steel produced by selective laser melting
AIP Conf. Proc. 2167, 020407 (2019)
https://doi.org/10.1063/1.5132274
Features of defect nucleation in nanosized crystals with BCC lattice
AIP Conf. Proc. 2167, 020408 (2019)
https://doi.org/10.1063/1.5132275
Correlation characteristics of autowave of localized plastic deformation and parameters of interatomic interactions
AIP Conf. Proc. 2167, 020410 (2019)
https://doi.org/10.1063/1.5132277
Study of cyclic loading impact on structural and mechanical properties of low carbon steel
AIP Conf. Proc. 2167, 020411 (2019)
https://doi.org/10.1063/1.5132278
Thermal oxidation kinetics and its effect on properties and structure of LDPE films
AIP Conf. Proc. 2167, 020412 (2019)
https://doi.org/10.1063/1.5132279
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.