Skip Nav Destination
Issues
PRELIMINARY
Preface: Oil and Gas Engineering
AIP Conf. Proc. 2141, 010001 (2019)
https://doi.org/10.1063/1.5122019
CHEMICAL TECHNOLOGY
A study on manganese modification of the alumina-supported Pt/SO4/ZrO2 catalysts for isomerization of n-hexane
AIP Conf. Proc. 2141, 020001 (2019)
https://doi.org/10.1063/1.5122020
Modified sulfur bitumen binders for bitumen-mineral compositions
AIP Conf. Proc. 2141, 020004 (2019)
https://doi.org/10.1063/1.5122023
Engine oil characteristics changes in uprated diesels
AIP Conf. Proc. 2141, 020005 (2019)
https://doi.org/10.1063/1.5122024
Investigation of the capsulated material properties for possibility of using it as recoverable raw materials
AIP Conf. Proc. 2141, 020006 (2019)
https://doi.org/10.1063/1.5122025
Analytical model of freezing drop of water to produce ice slurry at a pressure below the triple point
AIP Conf. Proc. 2141, 020009 (2019)
https://doi.org/10.1063/1.5122028
Effect of the conditions for the aqueous-phase hydrogenation of furfural over Pd/C catalysts on the reaction routes
AIP Conf. Proc. 2141, 020010 (2019)
https://doi.org/10.1063/1.5122029
Optimization of propan-butane mixture pyrolysis for obtaining liquid products as precursor of cellular carbon foam
AIP Conf. Proc. 2141, 020011 (2019)
https://doi.org/10.1063/1.5122030
The effect of fluorine additives into Pt/WO3-ZrO2-Al2O3 catalysts for n-hexane isomerization
AIP Conf. Proc. 2141, 020012 (2019)
https://doi.org/10.1063/1.5122031
Synthesis and study of Mg(Ni, Co, Li)Al-LDH prepared by mechanochemical method
AIP Conf. Proc. 2141, 020013 (2019)
https://doi.org/10.1063/1.5122032
Synthesis and study of bimetallic catalysts based on carbon-mineral materials derived from sapropel
AIP Conf. Proc. 2141, 020014 (2019)
https://doi.org/10.1063/1.5122033
Investigation of Pt-Re/Al2O3-ZrO2 catalysts for n-heptane reforming
AIP Conf. Proc. 2141, 020015 (2019)
https://doi.org/10.1063/1.5122034
Rational methods for processing of chromia-alumina catalyst
AIP Conf. Proc. 2141, 020018 (2019)
https://doi.org/10.1063/1.5122037
Investigation of the antifriction properties of nano-modified engine oil
AIP Conf. Proc. 2141, 020020 (2019)
https://doi.org/10.1063/1.5122039
A study on the interaction of manganese dioxide with ammonium chloride
AIP Conf. Proc. 2141, 020023 (2019)
https://doi.org/10.1063/1.5122042
The recovery of rare earth concentrate from spent cracking catalyst
AIP Conf. Proc. 2141, 020025 (2019)
https://doi.org/10.1063/1.5122044
Comparative research of pyrolysis of light alkanes (methane and ethane) on the resistive FeCrAl catalyst
AIP Conf. Proc. 2141, 020026 (2019)
https://doi.org/10.1063/1.5122045
A study of iron modification of the alumina-supported Pt/SO4/ZrO2 catalysts for isomerization of n-hexane
AIP Conf. Proc. 2141, 020027 (2019)
https://doi.org/10.1063/1.5122046
Prediction test of active silt druming on the biological cleaning unit of waste water at oil refining enterprise
AIP Conf. Proc. 2141, 020029 (2019)
https://doi.org/10.1063/1.5122048
Calculation methods for quality indicators of commercial gasolines (petrochemicals)
AIP Conf. Proc. 2141, 020030 (2019)
https://doi.org/10.1063/1.5122049
Investigation of the influence of functional additives based on carbon nanotubes for density of mineral motor oil
AIP Conf. Proc. 2141, 020031 (2019)
https://doi.org/10.1063/1.5122050
CHEMICAL, OIL AND GAS MECHANICAL ENGINEERING
Method of modeling heat exchange processes in the rooms
AIP Conf. Proc. 2141, 030001 (2019)
https://doi.org/10.1063/1.5122051
Analysis of temperature effect on deformation of low-speed compressor unit stage cylinder
AIP Conf. Proc. 2141, 030002 (2019)
https://doi.org/10.1063/1.5122052
The influence of the form gate on differential pressure when closing the pipeline gate
AIP Conf. Proc. 2141, 030003 (2019)
https://doi.org/10.1063/1.5122053
Exergy characteristics of a steam compressor heat pump
AIP Conf. Proc. 2141, 030005 (2019)
https://doi.org/10.1063/1.5122055
Analysis of load conditions of piston pump unit cylinder under temperature effects
AIP Conf. Proc. 2141, 030006 (2019)
https://doi.org/10.1063/1.5122056
Vaneless diffuser of the centrifugal compressor stage design method
AIP Conf. Proc. 2141, 030007 (2019)
https://doi.org/10.1063/1.5122057
Experimental determination of conditional clearances in cylinder-piston seals
AIP Conf. Proc. 2141, 030009 (2019)
https://doi.org/10.1063/1.5122059
Improving methodology calculating the leakages compressible environment in the working part of a screw compressor
AIP Conf. Proc. 2141, 030010 (2019)
https://doi.org/10.1063/1.5122060
Analysis of reciprocating booster compressor performance by mathematical modelling methods
AIP Conf. Proc. 2141, 030012 (2019)
https://doi.org/10.1063/1.5122062
Efficiency evaluation of oil and gas processing plants internal power supply sources
AIP Conf. Proc. 2141, 030016 (2019)
https://doi.org/10.1063/1.5122066
The geometric model of the multistage centrifugal compressor flow path in the ANSYS CFX
AIP Conf. Proc. 2141, 030017 (2019)
https://doi.org/10.1063/1.5122067
Average annual efficiency evaluation in the design of life support systems
AIP Conf. Proc. 2141, 030019 (2019)
https://doi.org/10.1063/1.5122069
Calculation and selection of parameters of the ring valve of reciprocating compressor
AIP Conf. Proc. 2141, 030020 (2019)
https://doi.org/10.1063/1.5122070
Research of two-stage reciprocating compressor by methods of physical and mathematical experiments
AIP Conf. Proc. 2141, 030021 (2019)
https://doi.org/10.1063/1.5122071
Model of fluid motion in control units of apparatus for petrochemical production
AIP Conf. Proc. 2141, 030022 (2019)
https://doi.org/10.1063/1.5122072
Hydrodynamic calculation of spray wire packing
AIP Conf. Proc. 2141, 030023 (2019)
https://doi.org/10.1063/1.5122073
Calculation of backward flow in channels with moving walls in oil free non-contact vacuum pumps
AIP Conf. Proc. 2141, 030024 (2019)
https://doi.org/10.1063/1.5122074
The methodology for gas direct drive piston compressor under gas reservoir depletion constructive optimization
AIP Conf. Proc. 2141, 030025 (2019)
https://doi.org/10.1063/1.5122075
Creating model stages of centrifugal compressor based on experimental data
AIP Conf. Proc. 2141, 030026 (2019)
https://doi.org/10.1063/1.5122076
Development of a mathematical model and computer simulation of web transportation systems
AIP Conf. Proc. 2141, 030027 (2019)
https://doi.org/10.1063/1.5122077
Development of the calculation method and designing of a vortex jet device for gas flow regulation purposes
AIP Conf. Proc. 2141, 030028 (2019)
https://doi.org/10.1063/1.5122078
Compressing equipment for Arctic shelf maintenance
AIP Conf. Proc. 2141, 030030 (2019)
https://doi.org/10.1063/1.5122080
Development of impellers based on prototypes in microturbine plants
AIP Conf. Proc. 2141, 030031 (2019)
https://doi.org/10.1063/1.5122081
The algorithm for calculating a ground thermostabilizer development in an Ansys environment
AIP Conf. Proc. 2141, 030033 (2019)
https://doi.org/10.1063/1.5122083
Selection of parameters of screw compressor profiles with the purpose of reducing reactions of the supports
AIP Conf. Proc. 2141, 030034 (2019)
https://doi.org/10.1063/1.5122084
Simulation of “foundation — A vertical oil storage tank” system by Gibbs-Roseboom method
AIP Conf. Proc. 2141, 030036 (2019)
https://doi.org/10.1063/1.5122086
The peculiarities of using nanofluids as working fluids in fire tube boilers
AIP Conf. Proc. 2141, 030037 (2019)
https://doi.org/10.1063/1.5122087
The influence of climatic factors on the destruction of shock-loaded bearings of mobile machines
S. V. Korneev; Y. V. Yarmovich; A. M. Kaveev; S. V. Pashukevich; V. B. Permyakov; R. V. Buravkin; A. A. Anoprienko; S. A. Kornilovich
AIP Conf. Proc. 2141, 030038 (2019)
https://doi.org/10.1063/1.5122088
Average daily cooling performance of the radiation cooling system in the summer period
AIP Conf. Proc. 2141, 030040 (2019)
https://doi.org/10.1063/1.5122090
Influence of clouds and air temperature on the performance of the radiation heating system
AIP Conf. Proc. 2141, 030041 (2019)
https://doi.org/10.1063/1.5122091
Modeling stress state stiffening of the nozzle zone of pressure vessel by finite element method
AIP Conf. Proc. 2141, 030042 (2019)
https://doi.org/10.1063/1.5122092
Thermodynamic analysis of the heat losses combined recovery ideal cycle of the compressor several process units
AIP Conf. Proc. 2141, 030045 (2019)
https://doi.org/10.1063/1.5122095
To the question of the use of working substances in vapor compressor heat pumps
AIP Conf. Proc. 2141, 030046 (2019)
https://doi.org/10.1063/1.5122096
Testing of temperature pile to obtain actual cooling performance
AIP Conf. Proc. 2141, 030047 (2019)
https://doi.org/10.1063/1.5122097
Determination of the molecular vacuum pump stage main parameters by the Monte-Carlo method
AIP Conf. Proc. 2141, 030048 (2019)
https://doi.org/10.1063/1.5122098
Compressor refrigerating machine for soil thermal stabilization systems
AIP Conf. Proc. 2141, 030049 (2019)
https://doi.org/10.1063/1.5122099
Calculating flow parameters of the molecular-viscous vacuum pump in the free molecular flow
AIP Conf. Proc. 2141, 030050 (2019)
https://doi.org/10.1063/1.5122100
Experience of performance modeling the single-stage pipeline centrifugal compressor
AIP Conf. Proc. 2141, 030051 (2019)
https://doi.org/10.1063/1.5122101
Using thermostabilizers in industrial refrigeration units with circulating water supply system
AIP Conf. Proc. 2141, 030053 (2019)
https://doi.org/10.1063/1.5122103
The efficiency improving methods analyzing for the gasoil pump unit
AIP Conf. Proc. 2141, 030054 (2019)
https://doi.org/10.1063/1.5122104
Research of the fluid flow in the flow cavity of elements of pneumatic-hydraulic systems
AIP Conf. Proc. 2141, 030056 (2019)
https://doi.org/10.1063/1.5122106
Numerical methods for calculation of geometrical criteria for the assessment of screw compressor rotor profile
AIP Conf. Proc. 2141, 030059 (2019)
https://doi.org/10.1063/1.5122109
Experimental research of the efficiency of gas filters with a short diffuser
AIP Conf. Proc. 2141, 030060 (2019)
https://doi.org/10.1063/1.5122110
Increasing the efficiency of the gas filter with a short diffuser by profiling its flow part
AIP Conf. Proc. 2141, 030062 (2019)
https://doi.org/10.1063/1.5122112
Technique for axial pump characteristics predicting in CFD package OpenFOAM
AIP Conf. Proc. 2141, 030063 (2019)
https://doi.org/10.1063/1.5122113
Gas-dynamic designing and profiling complex for the two-element centrifugal compressor stage with 3D impeller
AIP Conf. Proc. 2141, 030065 (2019)
https://doi.org/10.1063/1.5122115
Support with quasi-zero stiffness effect for processing equipment
AIP Conf. Proc. 2141, 030067 (2019)
https://doi.org/10.1063/1.5122117
MATERIALS RESEARCH AND STRUCTURAL MATERIALS
Possibility of ABS polymers application for centrifugal wheel model manufacture by additive printing
AIP Conf. Proc. 2141, 040001 (2019)
https://doi.org/10.1063/1.5122120
Corrosion properties of metal deposited with chromium cored wire with boron carbide alloying
AIP Conf. Proc. 2141, 040003 (2019)
https://doi.org/10.1063/1.5122122
Structure and properties of the weld metal N8G6M3FTB after aging
AIP Conf. Proc. 2141, 040004 (2019)
https://doi.org/10.1063/1.5122123
Antifriction multi-component polyetheretherketon (PEEK) based composites
AIP Conf. Proc. 2141, 040005 (2019)
https://doi.org/10.1063/1.5122124
Development of rational heat treatment modes for hot-rolled steel bends
AIP Conf. Proc. 2141, 040008 (2019)
https://doi.org/10.1063/1.5122127
Effect of ultrasonic impact treatment on mechanical properties of 3D-printed Ti-6Al-4V titanium alloy parts
S. V. Panin; Yu. I. Pochivalov; O. B. Perevalova; E. A. Sinyakova; M. S. Kazachenok; O. V. Evtushenko; D. G. Buslovich; A. O. Buyluk
AIP Conf. Proc. 2141, 040012 (2019)
https://doi.org/10.1063/1.5122131
Grain structure and impact toughness of Al-Li alloy joints formed by friction stir welding
AIP Conf. Proc. 2141, 040013 (2019)
https://doi.org/10.1063/1.5122132
Transformation of the individual MWCNT’s structure under electron irradiation and annealing in inert atmosphere
AIP Conf. Proc. 2141, 040014 (2019)
https://doi.org/10.1063/1.5122133
The formation of membranes based on oxidized two-layer porous silicon
AIP Conf. Proc. 2141, 040017 (2019)
https://doi.org/10.1063/1.5122136
Thermocycling effect on electrical resistance of V1-XFeXO2 system materials
AIP Conf. Proc. 2141, 040018 (2019)
https://doi.org/10.1063/1.5122137
Nanostructured titanium coatings for parts operating under conditions of fretting-corrosion
AIP Conf. Proc. 2141, 040019 (2019)
https://doi.org/10.1063/1.5122138
Research of impact of cold-hardening process during sandblasting of workpieces on cutting tool durability
AIP Conf. Proc. 2141, 040021 (2019)
https://doi.org/10.1063/1.5122140
Effect of modification on the segregation of alloying elements in a heat-resistant nickel alloy
AIP Conf. Proc. 2141, 040022 (2019)
https://doi.org/10.1063/1.5122141
Structure and properties of corrosion-resistant coatings of the Zr-Fe-Cr-Ni-Ti system
AIP Conf. Proc. 2141, 040023 (2019)
https://doi.org/10.1063/1.5122142
Surface energy and thickness of surface layer of atomic-smooth metals silicides
AIP Conf. Proc. 2141, 040024 (2019)
https://doi.org/10.1063/1.5122143
MONITORING, DIAGNOSTICS AND AUTOMATION
Condition monitoring of heat-exchange equipment of the diesel fuel hydrotreatment processes
AIP Conf. Proc. 2141, 050002 (2019)
https://doi.org/10.1063/1.5122145
Math modeling and transient characteristics research of vapor compression cooling system
AIP Conf. Proc. 2141, 050005 (2019)
https://doi.org/10.1063/1.5122148
Identification and monitoring of the polymer thermo-shrinkable couplings and coatings by the relief marking
AIP Conf. Proc. 2141, 050006 (2019)
https://doi.org/10.1063/1.5122149
Diagnostic signs on the basis of characteristic functions of vibroacoustic oscillations
AIP Conf. Proc. 2141, 050007 (2019)
https://doi.org/10.1063/1.5122150
Diagnosis of fuel equipment of diesel engines in oil-and-gas machinery and facilities
AIP Conf. Proc. 2141, 050009 (2019)
https://doi.org/10.1063/1.5122152
Heat storage as a means to improve the starting reliability of piston engines at below zero temperatures
AIP Conf. Proc. 2141, 050011 (2019)
https://doi.org/10.1063/1.5122154
The surface state assessment in corrosion equipment monitoring
AIP Conf. Proc. 2141, 050013 (2019)
https://doi.org/10.1063/1.5122156
Analysis of tie-in calculations for the pipeline on the basis of specialized software
AIP Conf. Proc. 2141, 050014 (2019)
https://doi.org/10.1063/1.5122157
Automation issues in multi-level control systems of petroleum refinery
AIP Conf. Proc. 2141, 050015 (2019)
https://doi.org/10.1063/1.5122158
Simulation of reactor system situational control
AIP Conf. Proc. 2141, 050016 (2019)
https://doi.org/10.1063/1.5122159
Mathematical modelling of the interaction of a multilayer pipeline with permafrosts in RF arctic zone
AIP Conf. Proc. 2141, 050018 (2019)
https://doi.org/10.1063/1.5122161
Reducing the energy consumption of semiconductor methane sensors for gas alarm systems
AIP Conf. Proc. 2141, 050020 (2019)
https://doi.org/10.1063/1.5122163
Real time intelligent technological control of reliability and efficiency in the systems of carbon transportation
AIP Conf. Proc. 2141, 050021 (2019)
https://doi.org/10.1063/1.5122164
Automated database formation when designing oil and gas processing facilities layouts
AIP Conf. Proc. 2141, 050022 (2019)
https://doi.org/10.1063/1.5122165
On the role of potential sensor in corrosion monitoring system of underground pipelines
AIP Conf. Proc. 2141, 050023 (2019)
https://doi.org/10.1063/1.5122166
Algorithms for synthesis of energy-efficient control by mimo systems functioning on long time intervals
AIP Conf. Proc. 2141, 050025 (2019)
https://doi.org/10.1063/1.5122168
Possibility of application of new materials for detecting and monitoring ammonia
AIP Conf. Proc. 2141, 050026 (2019)
https://doi.org/10.1063/1.5122169
Polymer plates geometry monitoring
O. V. Trapeznikova; S. V. Takayuk; I. V. Nagornova; A. A. Kozhushko; E. G. Bezzateeva; E. L. Kolbina
AIP Conf. Proc. 2141, 050028 (2019)
https://doi.org/10.1063/1.5122171
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.