Skip Nav Destination
Issues
PRELIMINARY
MS01 COMPOSITES FORMING PROCESSES
Hysteresis behavior modelling of woven fabric under large strain
AIP Conf. Proc. 2113, 020003 (2019)
https://doi.org/10.1063/1.5112508
Three-dimensional printing of continuous carbon fiber-reinforced shape memory polymer composites
AIP Conf. Proc. 2113, 020008 (2019)
https://doi.org/10.1063/1.5112513
Virtual description of a biaxial 0°/90° non-crimp fabric with normally distributed filament directions
AIP Conf. Proc. 2113, 020009 (2019)
https://doi.org/10.1063/1.5112514
Effect of press force in tensile strength and surface quality of press formed wood plastic composite products
AIP Conf. Proc. 2113, 020010 (2019)
https://doi.org/10.1063/1.5112515
Experimental analysis of process induced draping effects in textile preforms
AIP Conf. Proc. 2113, 020012 (2019)
https://doi.org/10.1063/1.5112517
Experimental investigation of reinforcement fabric cohesion in order to prevent the tow sliding defect
AIP Conf. Proc. 2113, 020013 (2019)
https://doi.org/10.1063/1.5112518
Over-3D printing of continuous carbon fibre composites on organo-sheet substrates
AIP Conf. Proc. 2113, 020015 (2019)
https://doi.org/10.1063/1.5112520
Wrinkling and bending during forming of multi-layered textile composite
AIP Conf. Proc. 2113, 020016 (2019)
https://doi.org/10.1063/1.5112521
Hot rolling effects on as-cast aluminum matrix nanocomposites reinforced by nano-sized ceramic powders
AIP Conf. Proc. 2113, 020018 (2019)
https://doi.org/10.1063/1.5112523
Numerical modeling of a hybrid forming process for three-dimensionally curved fiber-metal laminates
AIP Conf. Proc. 2113, 020019 (2019)
https://doi.org/10.1063/1.5112524
Stamp forming of thermoplastic automated fiber placement blanks: Influence of layup parameters on part quality
AIP Conf. Proc. 2113, 020021 (2019)
https://doi.org/10.1063/1.5112526
Simulation of resin-impregnation, heat-transfer and cure in a resin-injection pultrusion process
AIP Conf. Proc. 2113, 020022 (2019)
https://doi.org/10.1063/1.5112527
Analysis of inter-ply friction in consolidation process of thermoset woven prepregs
AIP Conf. Proc. 2113, 020023 (2019)
https://doi.org/10.1063/1.5112528
MS02 EXTRUSION AND DRAWING
Backward rod extrusion of bimetallic aluminum-copper alloys at room temperature
AIP Conf. Proc. 2113, 030001 (2019)
https://doi.org/10.1063/1.5112529
Extrusion of magnesium alloy hollow profiles with axial variable wall thickness
AIP Conf. Proc. 2113, 030002 (2019)
https://doi.org/10.1063/1.5112530
Numerical investigations on the cold welding of aluminum and steel using forward extrusion
AIP Conf. Proc. 2113, 030003 (2019)
https://doi.org/10.1063/1.5112531
The hot spot in Al-rod extrusion investigated by FEM-analysis
AIP Conf. Proc. 2113, 030006 (2019)
https://doi.org/10.1063/1.5112534
MS03 FORGING AND ROLLING
Validation of a purely elastic model and a finite element model for a screw press
AIP Conf. Proc. 2113, 040002 (2019)
https://doi.org/10.1063/1.5112536
Finite elements method modelling of void closure during multi directional hot forming of steel
AIP Conf. Proc. 2113, 040004 (2019)
https://doi.org/10.1063/1.5112538
Gradient structure of microalloyed steel produces superior mechanical behavior under dynamic loading
AIP Conf. Proc. 2113, 040006 (2019)
https://doi.org/10.1063/1.5112540
Conditions for development of regular structure by deformation of metal materials
AIP Conf. Proc. 2113, 040007 (2019)
https://doi.org/10.1063/1.5112541
Roll gap per rotation optimization in a radial ring rolling process
AIP Conf. Proc. 2113, 040008 (2019)
https://doi.org/10.1063/1.5112542
Application of the Sehitoglu’s model for the calculation of tool life in thixoforging of steel parts
AIP Conf. Proc. 2113, 040009 (2019)
https://doi.org/10.1063/1.5112543
Effect of heat treatment on the workability of hot isostatically pressed TNM-B1
AIP Conf. Proc. 2113, 040010 (2019)
https://doi.org/10.1063/1.5112544
Speeding-up numerical simulation of 3D forging through recurrent boundary contact conditions
AIP Conf. Proc. 2113, 040011 (2019)
https://doi.org/10.1063/1.5112545
FEM simulation of strain gradients induced in metal sheets by special rolling techniques
AIP Conf. Proc. 2113, 040012 (2019)
https://doi.org/10.1063/1.5112546
Interface shear strain of 1050/6061 laminated composite processed by asymmetric accumulative roll bonding
AIP Conf. Proc. 2113, 040013 (2019)
https://doi.org/10.1063/1.5112547
DIGIMU®: Full field recrystallization simulations for optimization of multi-pass processes
AIP Conf. Proc. 2113, 040014 (2019)
https://doi.org/10.1063/1.5112548
Material saving by a combination of rotary forging and conventional processes: Hybrid forging for net-shape gear
AIP Conf. Proc. 2113, 040015 (2019)
https://doi.org/10.1063/1.5112549
Modeling of friction behaviour during in temperature compression tests on aluminium alloys
AIP Conf. Proc. 2113, 040017 (2019)
https://doi.org/10.1063/1.5112551
Analysis of mapped temperature data on geometry points to characterize the influence of temperature deviations on cross-wedge rolling
Lorenz Quentin; Jens Kruse; Rüdiger Beermann; Carl Reinke; Jan Langner; Malte Stonis; Markus Kästner; Eduard Reithmeier
AIP Conf. Proc. 2113, 040018 (2019)
https://doi.org/10.1063/1.5112552
Cross-wedge rolling of PTA-welded hybrid steel billets with rolling bearing steel and hard material coatings
AIP Conf. Proc. 2113, 040019 (2019)
https://doi.org/10.1063/1.5112553
Theoretical investigations on the fatigue behavior of a tailored forming steel-aluminium bearing component
AIP Conf. Proc. 2113, 040020 (2019)
https://doi.org/10.1063/1.5112554
Application of irregular roller burnishing in the shaft straightening process - Experimental and numerical study
AIP Conf. Proc. 2113, 040021 (2019)
https://doi.org/10.1063/1.5112555
Modelling tailored forming joining zones with internal thickness extrapolation elements
AIP Conf. Proc. 2113, 040022 (2019)
https://doi.org/10.1063/1.5112556
A micro-thermo-mechanical model for a tailored formed joining zone deformed by die forging
AIP Conf. Proc. 2113, 040024 (2019)
https://doi.org/10.1063/1.5112558
Numerical modeling of the development of intermetallic layers between aluminium and steel during co-extrusion
AIP Conf. Proc. 2113, 040029 (2019)
https://doi.org/10.1063/1.5112563
MS04 INNOVATIVE JOINING BY FORMING TECHNOLOGIES
Geometric and corrosive influences on load-bearing capacity of multi-element shear-clinching specimen
AIP Conf. Proc. 2113, 050001 (2019)
https://doi.org/10.1063/1.5112565
Deformation behavior of high-strength steel rivets for self-piercing riveting applications
AIP Conf. Proc. 2113, 050002 (2019)
https://doi.org/10.1063/1.5112566
Thermomechanical analysis of the friction stir welding process
AIP Conf. Proc. 2113, 050003 (2019)
https://doi.org/10.1063/1.5112567
Temperature-controlled friction stir welding process of Al-Cu joints with complex geometries
AIP Conf. Proc. 2113, 050004 (2019)
https://doi.org/10.1063/1.5112568
Investigation of the tool wear behaviour in shear-clinching processes during the running-in phase
AIP Conf. Proc. 2113, 050005 (2019)
https://doi.org/10.1063/1.5112569
Mechanical joining without auxiliary element by cold formed pins for multi-material-systems
AIP Conf. Proc. 2113, 050006 (2019)
https://doi.org/10.1063/1.5112570
Micro-joining of shaped stainless steel sheets for fuel injection orifice with high misting capability
AIP Conf. Proc. 2113, 050007 (2019)
https://doi.org/10.1063/1.5112571
Technologies for the mechanical joining of aluminum die castings
AIP Conf. Proc. 2113, 050008 (2019)
https://doi.org/10.1063/1.5112572
Numerical investigation on the robustness of the roller clinching process
AIP Conf. Proc. 2113, 050009 (2019)
https://doi.org/10.1063/1.5112573
Testing of magnetic pulse welded joints – Destructive and non-destructive methods
AIP Conf. Proc. 2113, 050010 (2019)
https://doi.org/10.1063/1.5112574
Process optimization for flexible self-pierce riveting of multi-material structures
AIP Conf. Proc. 2113, 050011 (2019)
https://doi.org/10.1063/1.5112575
Experimental and numerical investigations of joining by electromagnetic forming for aeronautical applications
AIP Conf. Proc. 2113, 050012 (2019)
https://doi.org/10.1063/1.5112576
Electrically assisted forming simulation solutions with FORGE®
AIP Conf. Proc. 2113, 050013 (2019)
https://doi.org/10.1063/1.5112577
Characterizing multi-pass conditions for roll bonding of aluminum alloys
AIP Conf. Proc. 2113, 050014 (2019)
https://doi.org/10.1063/1.5112578
Magnetic pulse welding of tubular parts
Joerg Bellmann; Joern Lueg-Althoff; Sebastian Schulze; Marlon Hahn; Soeren Gies; Eckhard Beyer; A. Erman Tekkaya
AIP Conf. Proc. 2113, 050015 (2019)
https://doi.org/10.1063/1.5112579
The role of heat-treatments performed before and after a cold roll bonding process of galvanized steel sheets
Illia Hordych; Sebastian Herbst; Florian Nürnberger; Hans Christian Schmidt; Alejandro Gonzalez Orive; Werner Homberg; Guido Grundmeier; Hans Jürgen Maier
AIP Conf. Proc. 2113, 050017 (2019)
https://doi.org/10.1063/1.5112581
Which properties must a surface have to be suitable for cold pressure welding?
AIP Conf. Proc. 2113, 050019 (2019)
https://doi.org/10.1063/1.5112583
The influence of silicon in EN AW 6082 alloys on the bond strength in cold pressure welding
AIP Conf. Proc. 2113, 050020 (2019)
https://doi.org/10.1063/1.5112584
Experimental and numerical study of dissimilar sheet metal clinching
AIP Conf. Proc. 2113, 050021 (2019)
https://doi.org/10.1063/1.5112585
A novel linear friction welding based approach for sheet-bulk joining
AIP Conf. Proc. 2113, 050023 (2019)
https://doi.org/10.1063/1.5112587
Novel approach in cold forging for efficient manufacturing of shaft-hub-assemblies
AIP Conf. Proc. 2113, 050024 (2019)
https://doi.org/10.1063/1.5112588
Mechanical testing of friction drilled and form tapped bolt joints for abrasion resistant steel applications
AIP Conf. Proc. 2113, 050025 (2019)
https://doi.org/10.1063/1.5112589
Modelling of extrusion welding conditions for EN AW-7020 aluminium alloy
AIP Conf. Proc. 2113, 050027 (2019)
https://doi.org/10.1063/1.5112591
Application of a locking-free element in modeling of joining by clinching
AIP Conf. Proc. 2113, 050030 (2019)
https://doi.org/10.1063/1.5112594
Friction press joining of dissimilar materials: A novel concept to improve the joint strength
AIP Conf. Proc. 2113, 050031 (2019)
https://doi.org/10.1063/1.5112595
MS05 INTEGRATED MANUFACTURING AND SUSTAINABILITY
Sustainable progressive-stamping of brass American snaps by using the low-temperature plasma nitrided dies
AIP Conf. Proc. 2113, 060001 (2019)
https://doi.org/10.1063/1.5112596
Forging residual heat exploitation feasibility for annealing treatments in space restricted lay-outs
AIP Conf. Proc. 2113, 060003 (2019)
https://doi.org/10.1063/1.5112598
Integrated modeling of injection pultrusion
AIP Conf. Proc. 2113, 060006 (2019)
https://doi.org/10.1063/1.5112601
Single point incremental forming of cold-rolled polycarbonate sheets
AIP Conf. Proc. 2113, 060007 (2019)
https://doi.org/10.1063/1.5112602
Waste stream characterisation for industrial symbiosis matchmaking: A case study for ferro metals
AIP Conf. Proc. 2113, 060009 (2019)
https://doi.org/10.1063/1.5112604
Integrated design in welding and incremental forming: Mechanical behavior of friction stir welded blanks
AIP Conf. Proc. 2113, 060010 (2019)
https://doi.org/10.1063/1.5112605
MS06 LASER MATERIAL FORMING
The geometrical fine adjustment of circular honeycomb structure using laser welding
AIP Conf. Proc. 2113, 070001 (2019)
https://doi.org/10.1063/1.5112606
Laser surface pre–treatment of polyolefin substrates for adhesive bonding
AIP Conf. Proc. 2113, 070002 (2019)
https://doi.org/10.1063/1.5112607
Development of laser straightening (LS) strategies to remove distortion in welded aeronautical structures
AIP Conf. Proc. 2113, 070003 (2019)
https://doi.org/10.1063/1.5112608
MS07 MACHINING AND CUTTING
Finite-element simulations of Al7075-T6 orthogonal cutting: Effect of part geometry and mesh on chip morphology and formation mechanism
Mehdi Benhassine; Edouard Rivière-Lorphèvre; Pedro-Jose Arrazola; Pierre Gobin; Aurélie Granjon; Ohian Aizpuru; François Ducobu
AIP Conf. Proc. 2113, 080003 (2019)
https://doi.org/10.1063/1.5112611
Experimental thermographic investigation for dry finish turning of SAF 2507 steel
AIP Conf. Proc. 2113, 080004 (2019)
https://doi.org/10.1063/1.5112612
Non-liquid alternative coolants in robotic machining
AIP Conf. Proc. 2113, 080005 (2019)
https://doi.org/10.1063/1.5112613
Estimation of cutting and friction coefficients in dry and cryogenic milling through experiments and simulations
AIP Conf. Proc. 2113, 080006 (2019)
https://doi.org/10.1063/1.5112614
Development of an automatic procedure for machining distortions improvement on an aeronautic axisymmetric component
AIP Conf. Proc. 2113, 080008 (2019)
https://doi.org/10.1063/1.5112616
Study of the one-shot drilling of CFRP/Ti6Al4V stacks with a double tip angle cutting-tool geometry
AIP Conf. Proc. 2113, 080010 (2019)
https://doi.org/10.1063/1.5112618
Experimental analysis of high speed milling using a ceramic tool
AIP Conf. Proc. 2113, 080011 (2019)
https://doi.org/10.1063/1.5112619
Influence of coolant flow on tool wear under jet cooling conditions
AIP Conf. Proc. 2113, 080012 (2019)
https://doi.org/10.1063/1.5112620
Study of the roughness of carbon fiber-reinforced composite plates in peripheral cryogenic milling
AIP Conf. Proc. 2113, 080013 (2019)
https://doi.org/10.1063/1.5112621
A method for producing burr-free shearing surfaces to increase part quality through two-stage counter-cutting
AIP Conf. Proc. 2113, 080014 (2019)
https://doi.org/10.1063/1.5112622
Micromachining simulation using a crystal plasticity model: ALE and CEL approaches
AIP Conf. Proc. 2113, 080017 (2019)
https://doi.org/10.1063/1.5112625
Development of a numerical model for the cryogenic machining simulation applied to a nickel superalloy
AIP Conf. Proc. 2113, 080018 (2019)
https://doi.org/10.1063/1.5112626
Suppression mechanism of diamond tool wear in ultrasonic vibration cutting
AIP Conf. Proc. 2113, 080020 (2019)
https://doi.org/10.1063/1.5112628
Towards inverse simulation: Effect of material parameters on machining predictions
AIP Conf. Proc. 2113, 080021 (2019)
https://doi.org/10.1063/1.5112629
Influence of chip segmentation of Ti64 on the topography of the machined surface
AIP Conf. Proc. 2113, 080022 (2019)
https://doi.org/10.1063/1.5112630
Experimental and numerical investigation of the cutting force during the angle shearing of several steels
AIP Conf. Proc. 2113, 080024 (2019)
https://doi.org/10.1063/1.5112632
MS08 NANOSTRUCTURED MATERIALS FABRICATION AND APPLICATIONS
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
Connection between shock wave induced indentations and hardness by means of neural networks
AIP Conf. Proc. 2113, 100001 (2019)
https://doi.org/10.1063/1.5112634
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
On the choice of basis in proper orthogonal decomposition-based surrogate models
AIP Conf. Proc. 2113, 100002 (2019)
https://doi.org/10.1063/1.5112635
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
On the effect of boundary conditions for electromagnetism in induction heat treatment simulations
AIP Conf. Proc. 2113, 100003 (2019)
https://doi.org/10.1063/1.5112636
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
Comparison of springback value of the selected structure element for cold forming and hot forming methods
AIP Conf. Proc. 2113, 100005 (2019)
https://doi.org/10.1063/1.5112638
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
A process of forming austenitic steel using a rubber membrane and oil
AIP Conf. Proc. 2113, 100006 (2019)
https://doi.org/10.1063/1.5112639
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
Parametric numerical solutions of additive manufacturing processes
AIP Conf. Proc. 2113, 100007 (2019)
https://doi.org/10.1063/1.5112640
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
Advanced design of tooling for sheet-metal forming through numerical simulations in the scope of SRF crab cavities at CERN
A. Amorim Carvalho; S. Barrière; J. Brachet; B. Bulat; R. Calaga; E. Cano-Pleite; O. Capatina; T. Capelli; A. Dallocchio; M. Garlaschè; L. Giordanino; R. Leuxe; M. Narduzzi; L. Prever-Loiri
AIP Conf. Proc. 2113, 100008 (2019)
https://doi.org/10.1063/1.5112641
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
Post-machining distortion mitigation via bending straightening, a multiparametric ROM study
AIP Conf. Proc. 2113, 100009 (2019)
https://doi.org/10.1063/1.5112642
MS09 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING
MS10 NON-CONVENTIONAL PROCESSES
Residual effects of ultrasonic-assisted compression testing on pure copper
AIP Conf. Proc. 2113, 110001 (2019)
https://doi.org/10.1063/1.5112644
Localized heat assisted incremental forming of polycarbonate sheets by tool rotation
AIP Conf. Proc. 2113, 110002 (2019)
https://doi.org/10.1063/1.5112645
The optimization of the spark erosive removal process – Dependencies and benefits
AIP Conf. Proc. 2113, 110003 (2019)
https://doi.org/10.1063/1.5112646
Local material removal mechanisms of cemented carbides in abrasive flow machining
AIP Conf. Proc. 2113, 110004 (2019)
https://doi.org/10.1063/1.5112647
Comparison of design approaches to generate tools for a forming process with a six degree of freedom press
AIP Conf. Proc. 2113, 110005 (2019)
https://doi.org/10.1063/1.5112648
Flexible die as reinforcement for aluminum foam samples
AIP Conf. Proc. 2113, 110006 (2019)
https://doi.org/10.1063/1.5112649
Resin microwave preheating in liquid composite molding process
AIP Conf. Proc. 2113, 110007 (2019)
https://doi.org/10.1063/1.5112650
Surface modification for corrosion resistance of electric conductive metal surfaces with plasma electrolytic polishing
Felix Reinhardt; Falko Böttger-Hiller; Christian Kranhold; Hans-Peter Schulze; Oliver Kröning; Henning Zeidler; Thomas Lampke
AIP Conf. Proc. 2113, 110009 (2019)
https://doi.org/10.1063/1.5112652
Analysis of EDM drilling of porous SiC/Al-Mg composite
AIP Conf. Proc. 2113, 110010 (2019)
https://doi.org/10.1063/1.5112653
Numerical investigations on the influence of material properties on bending behavior of comb shaped stator bodies
AIP Conf. Proc. 2113, 110011 (2019)
https://doi.org/10.1063/1.5112654
Effects of machining conditions on the accuracy of electro-discharge milling in carbon-based dielectric
AIP Conf. Proc. 2113, 110012 (2019)
https://doi.org/10.1063/1.5112655
MS11 OPTIMIZATION AND INVERSE ANALYSIS IN FORMING
Parametrization of bi-parametric friction models through inverse modelling of conical tube-upsetting tests
AIP Conf. Proc. 2113, 120002 (2019)
https://doi.org/10.1063/1.5112657
Comparing metamodeling techniques for variability analysis in sheet metal forming processes
AIP Conf. Proc. 2113, 120003 (2019)
https://doi.org/10.1063/1.5112658
Tailoring material scatter for metal forming processes based on inverse robust optimization
AIP Conf. Proc. 2113, 120005 (2019)
https://doi.org/10.1063/1.5112660
MS12 POLYMER PROCESSING AND THERMOMECHANICAL PROPERTIES
Constitutive modeling of the mechanics of polyethylene films in stretch wrapping processes
AIP Conf. Proc. 2113, 130001 (2019)
https://doi.org/10.1063/1.5112661
Development of a simulation method for the prediction of transmission errors of injection molded spur gears
AIP Conf. Proc. 2113, 130003 (2019)
https://doi.org/10.1063/1.5112663
Modeling of IR lamps with coated reflector used in the slurry powder impregnation process of composite tapes
AIP Conf. Proc. 2113, 130005 (2019)
https://doi.org/10.1063/1.5112665
Modelling the constitutive behaviour of poly(ether-ether-ketone) for forming processes
AIP Conf. Proc. 2113, 130006 (2019)
https://doi.org/10.1063/1.5112666
Experimental characterization of the thermal behavior of carbon/PEEK tapes in the laser-assisted AFP process
AIP Conf. Proc. 2113, 130007 (2019)
https://doi.org/10.1063/1.5112667
Thermal homogeneity in single screw channel polymer melt flows
AIP Conf. Proc. 2113, 130008 (2019)
https://doi.org/10.1063/1.5112668
Embossing of the paperboard and the effect of polymer coating on local deformation
AIP Conf. Proc. 2113, 130009 (2019)
https://doi.org/10.1063/1.5112669
MS13 SEMI-SOLID PROCESSES
Semisolid forging of steels: Readiness from an industrial point of view
AIP Conf. Proc. 2113, 140001 (2019)
https://doi.org/10.1063/1.5112673
Development of a flow curve based material model of aluminium alloys in the semi-solid state
AIP Conf. Proc. 2113, 140002 (2019)
https://doi.org/10.1063/1.5112674
MS14 ADDITIVE MANUFACTURING
Additive tooling for thermoforming a cowling of an UAV using binder jetting
AIP Conf. Proc. 2113, 150001 (2019)
https://doi.org/10.1063/1.5112677
Interest of process monitoring and numerical simulation to improve metallic additive manufacturing processes
AIP Conf. Proc. 2113, 150002 (2019)
https://doi.org/10.1063/1.5112678
Equipment for additive manufacturing of biocompatible silicone
AIP Conf. Proc. 2113, 150003 (2019)
https://doi.org/10.1063/1.5112679
Towards the definition an innovative supply chain: AMSA, an application of the cloud manufacturing
AIP Conf. Proc. 2113, 150004 (2019)
https://doi.org/10.1063/1.5112680
Numerical and experimental analysis of the thermal profile of printed layers during selective laser sintering process of poly(etheretherketone)
Adrian Korycki; Christian Garnier; Nathan Rodier; France Chabert; Elisabeth Laurent; Valérie Nassiet
AIP Conf. Proc. 2113, 150005 (2019)
https://doi.org/10.1063/1.5112681
Exploitation of forming of the 3D printed materials
Kari Mäntyjärvi; Terho Iso-Junno; Aappo Mustakangas; Tero Jokelainen; Markku Keskitalo; Antti Järvenpää
AIP Conf. Proc. 2113, 150007 (2019)
https://doi.org/10.1063/1.5112683
Model reduction method for the simulation of the selective laser melting process
AIP Conf. Proc. 2113, 150008 (2019)
https://doi.org/10.1063/1.5112684
Fluidised bed machining of metal additive manufactured parts
A. El Hassanin; M. Troiano; A. T. Silvestri; V. Contaldi; F. Scherillo; R. Solimene; F. Scala; A. Squillace; P. Salatino
AIP Conf. Proc. 2113, 150009 (2019)
https://doi.org/10.1063/1.5112685
The effect of processing parameters on formability of 3D printed AISI 316L
AIP Conf. Proc. 2113, 150010 (2019)
https://doi.org/10.1063/1.5112686
Formability of selective laser melted AlSi10Mg
Tero Jokelainen; Terho Iso-Junno; Antti Järvenpää; Aappo Mustakangas; Markku Keskitalo; Kari Mäntyjärvi
AIP Conf. Proc. 2113, 150011 (2019)
https://doi.org/10.1063/1.5112687
Forming and formability of 3D printed thermoplastics
AIP Conf. Proc. 2113, 150012 (2019)
https://doi.org/10.1063/1.5112688
Laser surface texturing for the improvement of press-fit joint bond strength
AIP Conf. Proc. 2113, 150013 (2019)
https://doi.org/10.1063/1.5112689
Rapid prototyping solution for the production of vulcanized rubber components
AIP Conf. Proc. 2113, 150014 (2019)
https://doi.org/10.1063/1.5112690
Fundamental study on additive manufacturing of aluminum alloys by friction surfacing layer deposition
AIP Conf. Proc. 2113, 150015 (2019)
https://doi.org/10.1063/1.5112691
Additive manufacturing with wire – Comparison of processes
AIP Conf. Proc. 2113, 150016 (2019)
https://doi.org/10.1063/1.5112692
Wire-arc additive manufacturing of pre-forms for forging of a Ti–6Al–4V turbine blade
AIP Conf. Proc. 2113, 150017 (2019)
https://doi.org/10.1063/1.5112693
Creep behaviour of Ti-6Al-4V produced by SLM
AIP Conf. Proc. 2113, 150018 (2019)
https://doi.org/10.1063/1.5112694
Numerical study of rolling process on the plastic strain distribution in wire + arc additive manufactured Ti-6Al-4V
AIP Conf. Proc. 2113, 150019 (2019)
https://doi.org/10.1063/1.5112695
Chemical etching as a finishing process for electron beam melting (EBM) parts
AIP Conf. Proc. 2113, 150020 (2019)
https://doi.org/10.1063/1.5112696
MS15 FORMABILITY OF METALLIC MATERIALS
Study on the potential rupture position of SUS304 stainless steel welded tubes under hydroforming conditions
AIP Conf. Proc. 2113, 160003 (2019)
https://doi.org/10.1063/1.5112700
Heating effect on the forming behaviour of high nitrogen steel in bulk forming
AIP Conf. Proc. 2113, 160004 (2019)
https://doi.org/10.1063/1.5112701
Hole expansion forming analysis of mild steel sheet using a material model based on crystal plasticity
AIP Conf. Proc. 2113, 160005 (2019)
https://doi.org/10.1063/1.5112702
Studies on the influence of embossing on the mechanical properties of high-strength sheet metal
AIP Conf. Proc. 2113, 160006 (2019)
https://doi.org/10.1063/1.5112703
Evaluation of edge formability in high strength sheets through a fracture mechanics approach
AIP Conf. Proc. 2113, 160007 (2019)
https://doi.org/10.1063/1.5112704
Comparison of the formability of austenitic reversion-treated and temper-rolled 17Cr-7Ni steels
AIP Conf. Proc. 2113, 160008 (2019)
https://doi.org/10.1063/1.5112705
Fatigue behaviour and lifetime prediction of cold-formed high strength steel
AIP Conf. Proc. 2113, 160011 (2019)
https://doi.org/10.1063/1.5112708
Failure of DP and TRIP steel sheets in different deformation modes
AIP Conf. Proc. 2113, 160012 (2019)
https://doi.org/10.1063/1.5112709
Trials to evaluate bulging formability of duplex embossed A1050-O sheet using erichsen test
AIP Conf. Proc. 2113, 160014 (2019)
https://doi.org/10.1063/1.5112711
The mechanics of the “eye”- Specimen bend test investigated by experiment and FE-analysis
AIP Conf. Proc. 2113, 160016 (2019)
https://doi.org/10.1063/1.5112713
Anisotropic plasticity model considering the dynamic strain ageing effects
AIP Conf. Proc. 2113, 160017 (2019)
https://doi.org/10.1063/1.5112714
Development of delayed cracking evaluation method for meta-stable austenitic stainless steels
AIP Conf. Proc. 2113, 160018 (2019)
https://doi.org/10.1063/1.5112715
MS16 INCREMENTAL AND SHEET METAL FORMING
Microstructure and modelling of shear forming
AIP Conf. Proc. 2113, 170001 (2019)
https://doi.org/10.1063/1.5112717
Intrinsically lubricated tool inserts for deep drawing applications generated by selective laser melting
AIP Conf. Proc. 2113, 170004 (2019)
https://doi.org/10.1063/1.5112720
Numerical-empirical-based function for the assessment of the stiffness distribution on automotive body panels
AIP Conf. Proc. 2113, 170007 (2019)
https://doi.org/10.1063/1.5112723
Processing of new dual-phase (DP) and complex-phase (CP) steels for automotive applications by tailored hot forming routes
Iñaki Pérez; Maribel Arribas; Iñigo Aranguren; Ángela Mangas; Radhakanta Rana; Chris Lahaije; Daniele De Caro
AIP Conf. Proc. 2113, 170008 (2019)
https://doi.org/10.1063/1.5112724
Influence of the mechanical model of titanium T40 on the predicted forces during incremental forming process
AIP Conf. Proc. 2113, 170010 (2019)
https://doi.org/10.1063/1.5112726
Numerical/experimental investigation of the production of thin magnesium alloy components via superplastic forming
AIP Conf. Proc. 2113, 170011 (2019)
https://doi.org/10.1063/1.5112727
Testing the accuracy of in-process springback measurements in tube draw bending
AIP Conf. Proc. 2113, 170013 (2019)
https://doi.org/10.1063/1.5112729
3D numerical analyses of SPIF performed on tailored sheets to control their thinning
AIP Conf. Proc. 2113, 170014 (2019)
https://doi.org/10.1063/1.5112730
The perspective of sensor integration and automated decision making in roll forming
AIP Conf. Proc. 2113, 170015 (2019)
https://doi.org/10.1063/1.5112731
Measurement of three-dimensional shape of minute burr formed through punching process of circle hole
AIP Conf. Proc. 2113, 170016 (2019)
https://doi.org/10.1063/1.5112732
Investigation of martensite-transformation and forming properties of additively reinforced 22MnB5 sheet metals
Ismail Ünsal; Markus Hirtler; Alexander Sviridov; Markus Bambach; R. Hama-Saleh; A. Weisheit; J. H. Schleifenbaum; Mike Kamaliev; A. Erman Tekkaya
AIP Conf. Proc. 2113, 170019 (2019)
https://doi.org/10.1063/1.5112735
Lightweighting potential of an automotive roof reinforcement using aluminum alloys in place of high strength steels
AIP Conf. Proc. 2113, 170021 (2019)
https://doi.org/10.1063/1.5112737
Process planning for precision incremental forming of complex parts
AIP Conf. Proc. 2113, 170022 (2019)
https://doi.org/10.1063/1.5112738
MS17 MATERIAL BEHAVIOUR MODELLING
Effect of plastic strain and ductile damage on elastic modulus of multiphase steel and its impact on springback prediction
Sebastian Münstermann; Yannik Sparrer; Yuan Yao; Junhe Lian; Rickmer Meya; Till Clausmeyer; A. Erman Tekkaya
AIP Conf. Proc. 2113, 180001 (2019)
https://doi.org/10.1063/1.5112739
About localization on plane strain tensile test on bimaterial specimen
AIP Conf. Proc. 2113, 180004 (2019)
https://doi.org/10.1063/1.5112742
Failure of AA6022-T4 sheets in hole-expansion after uniaxial prestrain
AIP Conf. Proc. 2113, 180005 (2019)
https://doi.org/10.1063/1.5112743
Numerical study on the effect of microstructure on the mechanical behaviour of dual-phase steels
AIP Conf. Proc. 2113, 180006 (2019)
https://doi.org/10.1063/1.5112744
Shear bands formation in different engineering materials subjected to dynamic compression
AIP Conf. Proc. 2113, 180007 (2019)
https://doi.org/10.1063/1.5112745
ATLAS of yield surfaces for strongly textured FCC polycrystals
AIP Conf. Proc. 2113, 180008 (2019)
https://doi.org/10.1063/1.5112746
Prediction of stress-strain curves for aluminium alloys using symbolic regression
AIP Conf. Proc. 2113, 180009 (2019)
https://doi.org/10.1063/1.5112747
Finite element modelling of material deformation and damage by tension under cyclic bending and compression test
AIP Conf. Proc. 2113, 180012 (2019)
https://doi.org/10.1063/1.5112750
The role of viscoelasticity in the mechanical modelling of rubbers
AIP Conf. Proc. 2113, 180013 (2019)
https://doi.org/10.1063/1.5112751
Crystal plasticity modelling of flow behavior under various strain rates
AIP Conf. Proc. 2113, 180015 (2019)
https://doi.org/10.1063/1.5112753
Prediction of void growth using gradient enhanced polycrystal plasticity
AIP Conf. Proc. 2113, 180016 (2019)
https://doi.org/10.1063/1.5112754
Study of high purity nickel with various grain sizes using shear tests
AIP Conf. Proc. 2113, 180017 (2019)
https://doi.org/10.1063/1.5112755
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Classification data mining with Laplacian Smoothing on Naïve Bayes method
Ananda P. Noto, Dewi R. S. Saputro