Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Selected aspects of numerical modeling of the short span thin-walled beams
AIP Conf. Proc. 2078, 020001 (2019)
https://doi.org/10.1063/1.5092004
Approximate bifurcation load of short thin-walled laminate plate structures with imperfection
AIP Conf. Proc. 2078, 020002 (2019)
https://doi.org/10.1063/1.5092005
The work of a compressed, composite plate in asymmetrical arrangement of layers
AIP Conf. Proc. 2078, 020005 (2019)
https://doi.org/10.1063/1.5092008
The analysis of sensitivity to eccentric load of compressed thin-walled laminate columns
AIP Conf. Proc. 2078, 020006 (2019)
https://doi.org/10.1063/1.5092009
Progressive failure analysis of thin-walled composite structure with open cross-section
AIP Conf. Proc. 2078, 020007 (2019)
https://doi.org/10.1063/1.5092010
Utility of boundary element method for modelling heat flow in floor heating systems
AIP Conf. Proc. 2078, 020008 (2019)
https://doi.org/10.1063/1.5092011
Study of the distribution of bolt forces in a multi-bolted system under operational normal loads
AIP Conf. Proc. 2078, 020011 (2019)
https://doi.org/10.1063/1.5092014
Influence of 3D scanner parameters on accuracy evaluation of vehicle element deformation
AIP Conf. Proc. 2078, 020012 (2019)
https://doi.org/10.1063/1.5092015
Investigation of armoured personnel carrier crew subjected to impact load
AIP Conf. Proc. 2078, 020013 (2019)
https://doi.org/10.1063/1.5092016
Neural networks based method for automatic classification of GPR data
AIP Conf. Proc. 2078, 020014 (2019)
https://doi.org/10.1063/1.5092017
Numerical modeling of random packed beds of various packing densities with a sequential deposition algorithm
AIP Conf. Proc. 2078, 020015 (2019)
https://doi.org/10.1063/1.5092018
Development of test device for springback study in sheet metal bending operation
AIP Conf. Proc. 2078, 020016 (2019)
https://doi.org/10.1063/1.5092019
Generalized vehicle durability index for different traffic conditions
AIP Conf. Proc. 2078, 020017 (2019)
https://doi.org/10.1063/1.5092020
The use of computer techniques during construction of unmanned ground vehicle
AIP Conf. Proc. 2078, 020018 (2019)
https://doi.org/10.1063/1.5092021
Numerical analysis of energy absorbers in the form of aluminium square section columns with round indentations
AIP Conf. Proc. 2078, 020020 (2019)
https://doi.org/10.1063/1.5092023
The modular test stand for fatigue testing of aeronautical structures – Design phase
AIP Conf. Proc. 2078, 020021 (2019)
https://doi.org/10.1063/1.5092024
Influence of biomass fly-ash and asphalt emulsion on properties of cement composites – A statistical study
AIP Conf. Proc. 2078, 020022 (2019)
https://doi.org/10.1063/1.5092025
Estimation of wind pressure acting on the new palm house in Gdansk
AIP Conf. Proc. 2078, 020023 (2019)
https://doi.org/10.1063/1.5092026
Numerical analysis of the work of a PUR cellasto material buffer
AIP Conf. Proc. 2078, 020025 (2019)
https://doi.org/10.1063/1.5092028
Electric cars as a new mobility concept complying with sustainable development principles
AIP Conf. Proc. 2078, 020026 (2019)
https://doi.org/10.1063/1.5092029
Numerical research of selected features of the non-pneumatic tire
AIP Conf. Proc. 2078, 020027 (2019)
https://doi.org/10.1063/1.5092030
Forced convection heat transfer in square duct with heated and adiabatic walls at constant axial heat flux
AIP Conf. Proc. 2078, 020028 (2019)
https://doi.org/10.1063/1.5092031
Modification of the shape of thermal insulation of a twin-pipe pre-insulated network
AIP Conf. Proc. 2078, 020030 (2019)
https://doi.org/10.1063/1.5092033
Simulation of laminar flow by the boundary element method in straight rod bundles in ducts
AIP Conf. Proc. 2078, 020031 (2019)
https://doi.org/10.1063/1.5092034
Development of a model and numerical simulations of a single bucket tracked excavator
AIP Conf. Proc. 2078, 020033 (2019)
https://doi.org/10.1063/1.5092036
Numerical calculations of limestone calcination in cement industry with use of shrink core model
AIP Conf. Proc. 2078, 020034 (2019)
https://doi.org/10.1063/1.5092037
Experimental and metallographic analysis of the energy-absorbing shield subjected to the EFP impact
AIP Conf. Proc. 2078, 020035 (2019)
https://doi.org/10.1063/1.5092038
Research of vibration spectrum of the bullets equipped with proximity fuse
AIP Conf. Proc. 2078, 020037 (2019)
https://doi.org/10.1063/1.5092040
Modeling of human head injuries in an armored vehicle
AIP Conf. Proc. 2078, 020038 (2019)
https://doi.org/10.1063/1.5092041
A method for experimental identification of bending resistance of reinforced rubber belts
AIP Conf. Proc. 2078, 020039 (2019)
https://doi.org/10.1063/1.5092042
Optimal shaping of the composite bridge girder by means of optimal control
AIP Conf. Proc. 2078, 020040 (2019)
https://doi.org/10.1063/1.5092043
Numerical analysis of momentum transfer in the case of blast protection structures
AIP Conf. Proc. 2078, 020041 (2019)
https://doi.org/10.1063/1.5092044
Model based enterprise (MBE) in prototype compressor project for new turboprop engine
AIP Conf. Proc. 2078, 020042 (2019)
https://doi.org/10.1063/1.5092045
Concept of a gun barrel based on the layer composite reinforced with continuous filament
AIP Conf. Proc. 2078, 020043 (2019)
https://doi.org/10.1063/1.5092046
Numerical analysis of Helical Auxetic Yarn elastomeric core tension
AIP Conf. Proc. 2078, 020044 (2019)
https://doi.org/10.1063/1.5092047
Modeling and simulation of movement of dispersed group of mobile robots using Simscape multibody software
AIP Conf. Proc. 2078, 020045 (2019)
https://doi.org/10.1063/1.5092048
Research on thermal resistance Rthj-c of high power semiconductor light sources
AIP Conf. Proc. 2078, 020047 (2019)
https://doi.org/10.1063/1.5092050
Thermal modeling and simulation of high power LED module
AIP Conf. Proc. 2078, 020048 (2019)
https://doi.org/10.1063/1.5092051
Numerical studies on influence of friction coefficient in multi-leaf spring on suspension basic characteristics
AIP Conf. Proc. 2078, 020049 (2019)
https://doi.org/10.1063/1.5092052
Numerical research of the cassette bridge joint strength with mapping of stand for experimental tests
AIP Conf. Proc. 2078, 020050 (2019)
https://doi.org/10.1063/1.5092053
Modeling of abrasive water suspension jet cutting process using response surface method
AIP Conf. Proc. 2078, 020051 (2019)
https://doi.org/10.1063/1.5092054
Analysis of the construction of TEG thermoelectric generator using CFD tools
AIP Conf. Proc. 2078, 020052 (2019)
https://doi.org/10.1063/1.5092055
Method of determining the locomotive engine specific fuel consumption based on its operating conditions
AIP Conf. Proc. 2078, 020053 (2019)
https://doi.org/10.1063/1.5092056
Analysis of driving simulation capabilities car vehicle on the engine brake stand
AIP Conf. Proc. 2078, 020054 (2019)
https://doi.org/10.1063/1.5092057
Modeling of mechanical behavior of double-phase precipitates in 2024 aluminum alloy
AIP Conf. Proc. 2078, 020056 (2019)
https://doi.org/10.1063/1.5092059
LENS Ti-6Al-4V alloy material properties determination for LS-Dyna package
AIP Conf. Proc. 2078, 020058 (2019)
https://doi.org/10.1063/1.5092061
The use of the WITNESS simulator for improving flows in a complex production system
AIP Conf. Proc. 2078, 020062 (2019)
https://doi.org/10.1063/1.5092065
Numerical investigation of dynamic loads of vehicle hull during firing
AIP Conf. Proc. 2078, 020064 (2019)
https://doi.org/10.1063/1.5092067
Numerical modelling of temperature gradient in layered structure of textiles for firemen clothing
AIP Conf. Proc. 2078, 020065 (2019)
https://doi.org/10.1063/1.5092068
Numerical calculation of the flow through a three-way coal dust separator
AIP Conf. Proc. 2078, 020066 (2019)
https://doi.org/10.1063/1.5092069
Testing the influence of the stiffness of structure elements of a military vehicle on the safety of the crew
AIP Conf. Proc. 2078, 020067 (2019)
https://doi.org/10.1063/1.5092070
Analysis of lateral torsional buckling and dimensioning for I-sections, C-sections and Z-sections purlins
AIP Conf. Proc. 2078, 020068 (2019)
https://doi.org/10.1063/1.5092071
Numerical optimization of the system supplying the cooling and lubricating fluid to the cutting zone
AIP Conf. Proc. 2078, 020069 (2019)
https://doi.org/10.1063/1.5092072
Approach to simulations of goods deliveries with the use of cargo bicycles
AIP Conf. Proc. 2078, 020070 (2019)
https://doi.org/10.1063/1.5092073
Shaping the incident impulse in the modified split Hopkinson pressure bar method
AIP Conf. Proc. 2078, 020072 (2019)
https://doi.org/10.1063/1.5092075
Examining influence of a rooftop cargo carrier position on automobile aerodynamics
AIP Conf. Proc. 2078, 020073 (2019)
https://doi.org/10.1063/1.5092076
Stochastic dominance application for optimal transport company selection
AIP Conf. Proc. 2078, 020074 (2019)
https://doi.org/10.1063/1.5092077
Different BIM levels during the design and construction stages on the example of public utility facilities
AIP Conf. Proc. 2078, 020075 (2019)
https://doi.org/10.1063/1.5092078
Prediction of the metric thread quality after axial thread rolling process on cold using of finite element methods
AIP Conf. Proc. 2078, 020076 (2019)
https://doi.org/10.1063/1.5092079
Risk of injury in lumbar spine during explosion of low-mass charge under vehicle
AIP Conf. Proc. 2078, 020078 (2019)
https://doi.org/10.1063/1.5092081
Numerical evaluation of applicability and accuracy of gurney equations for use in fixed size setups
AIP Conf. Proc. 2078, 020079 (2019)
https://doi.org/10.1063/1.5092082
FEM analysis of the plastic deformation of the regular arched asperities in the two-stage cold metal forming processes
Leon Kukielka; Lukasz Bohdal; Jaroslaw Chodor; Katarzyna Gotowala; Pawel Kaldunski; Krzysztof Kukielka; Agnieszka Kulakowska; Radoslaw Patyk; Michal Szczesniak
AIP Conf. Proc. 2078, 020081 (2019)
https://doi.org/10.1063/1.5092084
Numerical analysis and experimental researches of the influence of technological parameters burnishing rolling process on fatigue wear of shafts
Pawel Kaldunski; Radoslaw Patyk; Leon Kukielka; Lukasz Bohdal; Jaroslaw Chodor; Agnieszka Kulakowska
AIP Conf. Proc. 2078, 020082 (2019)
https://doi.org/10.1063/1.5092085
Topological optimization of machine elements with numerical methods in advanced FEM systems
Leon Kukielka; Lukasz Bohdal; Jarosław Chodor; Pawel Kaldunski; Krzysztof Kukielka; Agnieszka Kulakowska; Radosław Patyk; Krzysztof Lipiński; Grzegorz Szaliński
AIP Conf. Proc. 2078, 020083 (2019)
https://doi.org/10.1063/1.5092086
System for improving directional stability for articulated vehicles
AIP Conf. Proc. 2078, 020084 (2019)
https://doi.org/10.1063/1.5092087
Simulation of three-point bending of a simple composite beam using the commercial FEM software
AIP Conf. Proc. 2078, 020085 (2019)
https://doi.org/10.1063/1.5092088
Protection capabilities of the ankle joint against the consequences of impact load
AIP Conf. Proc. 2078, 020086 (2019)
https://doi.org/10.1063/1.5092089
Laboratory tests vs. FE analysis of concrete cylinders subjected to compression
AIP Conf. Proc. 2078, 020089 (2019)
https://doi.org/10.1063/1.5092092
Numerical investigation of flow stabilization in a channel with rapid change of flow direction
AIP Conf. Proc. 2078, 020090 (2019)
https://doi.org/10.1063/1.5092093
Optimization of PVT geometry in application of ground heat source regeneration
AIP Conf. Proc. 2078, 020091 (2019)
https://doi.org/10.1063/1.5092094
Numerical analysis of cooling of a hot plate by an array of submerged microjets
AIP Conf. Proc. 2078, 020092 (2019)
https://doi.org/10.1063/1.5092095
Thermal expansion coefficient influence on FML material deformation under thermal load
AIP Conf. Proc. 2078, 020094 (2019)
https://doi.org/10.1063/1.5092097
Impact of contact surface model in screw joints on the clamping force value
AIP Conf. Proc. 2078, 020095 (2019)
https://doi.org/10.1063/1.5092098
Sensitivity analysis of numerical model of CFRP mechanical joint
AIP Conf. Proc. 2078, 020096 (2019)
https://doi.org/10.1063/1.5092099
Using the simulation technique to improve efficiency in general aviation
AIP Conf. Proc. 2078, 020097 (2019)
https://doi.org/10.1063/1.5092100
Numerical-experimental static analysis of the effort of the crossbar-longeron in the semi-trailer frame
AIP Conf. Proc. 2078, 020098 (2019)
https://doi.org/10.1063/1.5092101
Application of augmented and virtual reality technologies in semi-trailer’s lifecycle
AIP Conf. Proc. 2078, 020099 (2019)
https://doi.org/10.1063/1.5092102
Accuracy study of stress intensity factor solutions obtained by commercial FE software
AIP Conf. Proc. 2078, 020100 (2019)
https://doi.org/10.1063/1.5092103
The meaning of qualitative reflective features of the facade in the design of illumination of architectural objects
AIP Conf. Proc. 2078, 020102 (2019)
https://doi.org/10.1063/1.5092105
Theoretical fundamentals for formulation of discrete equations of motion in thermodynamic approach for description of metal forming processes
Leon Kukielka; Lukasz Bohdal; Jaroslaw Chodor; Pawel Kaldunski; Krzysztof Kukielka; Agnieszka Kulakowska; Radoslaw Patyk
AIP Conf. Proc. 2078, 020104 (2019)
https://doi.org/10.1063/1.5092107
Jaw biomechanics: Estimation of activity of muscles acting at the temporomandibular joint
AIP Conf. Proc. 2078, 020105 (2019)
https://doi.org/10.1063/1.5092108
Initial credibility analysis of a numerical model of heat and moisture transfer in porous building materials
Michał Wasik; Łukasz Cieślikiewicz; Piotr Łapka; Piotr Furmański; Michał Kubiś; Mirosław Seredyński; Karol Pietrak; Tomasz S. Wiśniewski; Maciej Jaworski
AIP Conf. Proc. 2078, 020106 (2019)
https://doi.org/10.1063/1.5092109
About numerical analysis of pin loaded joints in laminate structure
AIP Conf. Proc. 2078, 020107 (2019)
https://doi.org/10.1063/1.5092110
New solutions for the problem of design of thin-walled torsion-loaded structures with use of the SADSF method
AIP Conf. Proc. 2078, 020110 (2019)
https://doi.org/10.1063/1.5097121
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Students’ mathematical conceptual understanding: What happens to proficient students?
Dian Putri Novita Ningrum, Budi Usodo, et al.