Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Issues

Volume 2065, Issue 1
5 February 2019
Issue Cover
All Issues
In this Issue

PRELIMINARY

Preface: Proceedings of the 34th International Conference of the Polymer Processing Society (PPS-34)
AIP Conf. Proc. 2065, 010001 (2019) https://doi.org/10.1063/1.5088250
View articletitled, Preface: Proceedings of the 34th International Conference of the Polymer Processing Society (PPS-34)
Open the PDF for in another window

PLENARY AND INVITED PAPERS

Systematic analysis of the effects of moulding conditions on the properties of shape memory polymers
A. H. Danielak; A. Islam
AIP Conf. Proc. 2065, 020001 (2019) https://doi.org/10.1063/1.5088251
View articletitled, Systematic analysis of the effects of moulding conditions on the properties of shape memory polymers
Open the PDF for in another window
Injection molding with time modulation of mold surface temperature. Analysis and modeling of pressure and temperature evolutions
V. Speranza; S. Liparoti; R. Pantani; G. Titomanlio
AIP Conf. Proc. 2065, 020002 (2019) https://doi.org/10.1063/1.5088252
View articletitled, Injection molding with time modulation of mold surface temperature. Analysis and modeling of pressure and temperature evolutions
Open the PDF for in another window
Visualization of cascade injection molding in hot-runner system
Hidetoshi Yokoi; Nobuyuki Takagi
AIP Conf. Proc. 2065, 020003 (2019) https://doi.org/10.1063/1.5088253
View articletitled, Visualization of cascade injection molding in hot-runner system
Open the PDF for in another window
Addition effect of aliphatic monools and diols on the conductivity enhancement of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid) (PEDOT:PSS)
Shigeji Konagaya; Misako Mutou; Mariko Terada
AIP Conf. Proc. 2065, 020004 (2019) https://doi.org/10.1063/1.5088254
View articletitled, Addition effect of aliphatic monools and diols on the conductivity enhancement of poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonic acid) (PEDOT:PSS)
Open the PDF for in another window
Structure-property relationship for poly(ethylene terephthalate) fibers prepared through continuous drawing in ethanol
Dongwoo Go; Wataru Takarada; Arun Aneja; Takeshi Kikutani
AIP Conf. Proc. 2065, 020005 (2019) https://doi.org/10.1063/1.5088255
View articletitled, Structure-property relationship for poly(ethylene terephthalate) fibers prepared through continuous drawing in ethanol
Open the PDF for in another window
Investigation on the P-V-T-C property characterization and its importance on IC encapsulation material application
Chen-Chieh Wang; Chao-Tsai Huang; Chih-Chung Hsu; Rong-Yeu Chang; Ryan Huang; Michael F. Huang; Sheng-Jye Hwang
AIP Conf. Proc. 2065, 020006 (2019) https://doi.org/10.1063/1.5088256
View articletitled, Investigation on the P-V-T-C property characterization and its importance on IC encapsulation material application
Open the PDF for in another window
Flow characteristics of a thermoset fiber composite photopolymer resin in a vat polymerization additive manufacturing process
Thomas Hofstätter; Jon Spangenberg; David B. Pedersen; Guido Tosello; Hans N. Hansen
AIP Conf. Proc. 2065, 020007 (2019) https://doi.org/10.1063/1.5088257
View articletitled, Flow characteristics of a thermoset fiber composite photopolymer resin in a vat polymerization additive manufacturing process
Open the PDF for in another window
Polymer powders for laser-sintering: Powder production and performance qualification
Manfred Schmid; Marc Vetterli; Konrad Wegener
AIP Conf. Proc. 2065, 020008 (2019) https://doi.org/10.1063/1.5088258
View articletitled, Polymer powders for laser-sintering: Powder production and performance qualification
Open the PDF for in another window

CONTRIBUTED ORAL PAPERS

Study on the mechanism of the surface defect of the ceramic injection molded (CIM) insulator
Feng-Jen Hsu; Chao-Tsai Huang; Richard Lee; Denni Liao
AIP Conf. Proc. 2065, 030001 (2019) https://doi.org/10.1063/1.5088259
View articletitled, Study on the mechanism of the surface defect of the ceramic injection molded (CIM) insulator
Open the PDF for in another window
Using 3D injection molding simulation to explain emerging two- and three-dimensional surface structures of ABS and PC/ABS parts within the process of electroplating on plastics
Reinhard Schiffers; Mirco Janßen; Jens P. Siepmann; Johannes Wortberg; Felix A. Heinzler
AIP Conf. Proc. 2065, 030002 (2019) https://doi.org/10.1063/1.5088260
View articletitled, Using 3D injection molding simulation to explain emerging two- and three-dimensional surface structures of ABS and PC/ABS parts within the process of electroplating on plastics
Open the PDF for in another window
Strategies to preserve bio-based antimicrobial agents during extrusion and injection molding
Matthias Bruchmüller; Andreas Juadjur; Michèle Biehl; Janine Bauer
AIP Conf. Proc. 2065, 030003 (2019) https://doi.org/10.1063/1.5088261
View articletitled, Strategies to preserve bio-based antimicrobial agents during extrusion and injection molding
Open the PDF for in another window
Injection molding of liquid crystal polymer on Al plate with anodic aluminum oxide structure for heterogeneous bonding
Chao-Chang A. Chen; Wan-Hsuan Wu; Chia-Wei Yu
AIP Conf. Proc. 2065, 030004 (2019) https://doi.org/10.1063/1.5088262
View articletitled, Injection molding of liquid crystal polymer on Al plate with anodic aluminum oxide structure for heterogeneous bonding
Open the PDF for in another window
Evaluation of heating performance and its impact on surface transcription by rapid heating mold using thin electric heater
Takushi Saito; Hideki Hasegawa; Tatsuya Kawaguchi; Isao Satoh; Yutaka Shiraishi; Kei-Ichi Zouta
AIP Conf. Proc. 2065, 030005 (2019) https://doi.org/10.1063/1.5088263
View articletitled, Evaluation of heating performance and its impact on surface transcription by rapid heating mold using thin electric heater
Open the PDF for in another window
Establishment of new molding system for long fiber reinforced thermosetting resin
Ken Fujisaki; Hirotaka Goto; Tatsuya Tanaka; Masatoshi Nakajima; Takao Maenaka; Akira Inoue; Masanori Okazaki
AIP Conf. Proc. 2065, 030006 (2019) https://doi.org/10.1063/1.5088264
View articletitled, Establishment of new molding system for long fiber reinforced thermosetting resin
Open the PDF for in another window
Application of conformal cooling to reduce cooling time and warpage of a U-shaped plate
Chun-Ting Lu; Chun-Hsein Chen; Shi-Chang Tseng
AIP Conf. Proc. 2065, 030007 (2019) https://doi.org/10.1063/1.5088265
View articletitled, Application of conformal cooling to reduce cooling time and warpage of a U-shaped plate
Open the PDF for in another window
Study on liquid crystal polymer molding for off-axial aspherical reflective grating optical element by injection molding process
Chao-Chang A. Chen; Chang-Shun Lai; Chia-Wei Yu; Li-Hong Wang
AIP Conf. Proc. 2065, 030008 (2019) https://doi.org/10.1063/1.5088266
View articletitled, Study on liquid crystal polymer molding for off-axial aspherical reflective grating optical element by injection molding process
Open the PDF for in another window
Simulation based investigations on dissipation reduction in grooved melting zones using a high-speed-extruder
M. Janßen; J. Wortberg
AIP Conf. Proc. 2065, 030009 (2019) https://doi.org/10.1063/1.5088267
View articletitled, Simulation based investigations on dissipation reduction in grooved melting zones using a high-speed-extruder
Open the PDF for in another window
Self-optimizing barrel temperature setting control of single screw extruders for improving the melt quality
Verena Resonnek; Volker Schöppner
AIP Conf. Proc. 2065, 030010 (2019) https://doi.org/10.1063/1.5088268
View articletitled, Self-optimizing barrel temperature setting control of single screw extruders for improving the melt quality
Open the PDF for in another window
Local mean age of melt: New approaches for die optimisation
J. Kummerow; J. Wortberg
AIP Conf. Proc. 2065, 030011 (2019) https://doi.org/10.1063/1.5088269
View articletitled, Local mean age of melt: New approaches for die optimisation
Open the PDF for in another window
Mass transfer during polymer devolatilization in a twin-screw extruder
Stefan Hirschfeld; Olaf Wünsch
AIP Conf. Proc. 2065, 030012 (2019) https://doi.org/10.1063/1.5088270
View articletitled, Mass transfer during polymer devolatilization in a twin-screw extruder
Open the PDF for in another window
On the industrial measurements and numerical predictions of orientation changes undergone by reinforcement cords in tire manufacturing process
Choi Sung Hyun; Debbaut Benoit
AIP Conf. Proc. 2065, 030013 (2019) https://doi.org/10.1063/1.5088271
View articletitled, On the industrial measurements and numerical predictions of orientation changes undergone by reinforcement cords in tire manufacturing process
Open the PDF for in another window
Virtual lifetime prediction: Nonlinear damage accumulation for elastomer components in finite-element simulations
R. Schiffers; A. Nagarajah; S. Rocker; M. Mistler; R. Andrae
AIP Conf. Proc. 2065, 030014 (2019) https://doi.org/10.1063/1.5088272
View articletitled, Virtual lifetime prediction: Nonlinear damage accumulation for elastomer components in finite-element simulations
Open the PDF for in another window
Elastomeros cells as sinks seismic joints for contraction in floors expansion and sliding
Bertha Vera; Doris Farfán; Adan Vizcardo
AIP Conf. Proc. 2065, 030015 (2019) https://doi.org/10.1063/1.5088273
View articletitled, Elastomeros cells as sinks seismic joints for contraction in floors expansion and sliding
Open the PDF for in another window
Ring opening polymerization of poly(L-lactide) by macroinitiator
Dutchanee Pholharn; Yottha Srithep; John Morris
AIP Conf. Proc. 2065, 030016 (2019) https://doi.org/10.1063/1.5088274
View articletitled, Ring opening polymerization of poly(L-lactide) by macroinitiator
Open the PDF for in another window
Synthesis of uniform rod-like polymer particles via propylene polymerization using metallocene catalysts supported on Stober silica
Kuo-Tseng Li; Cheng-Ni Yang
AIP Conf. Proc. 2065, 030017 (2019) https://doi.org/10.1063/1.5088275
View articletitled, Synthesis of uniform rod-like polymer particles via propylene polymerization using metallocene catalysts supported on Stober silica
Open the PDF for in another window
Relationship between degree of polymerization and optical and thermal properties of Bisphenol-A in polycarbonate polymers
N. Kato; S. Ikeda; M. Hirakawa; K. Nishimori; H. Ito
AIP Conf. Proc. 2065, 030018 (2019) https://doi.org/10.1063/1.5088276
View articletitled, Relationship between degree of polymerization and optical and thermal properties of Bisphenol-A in polycarbonate polymers
Open the PDF for in another window
Injection-molded poly(L-lactic acid)/poly(D-lactic acid) blends: Thermal and mechanical properties
Yottha Srithep; Dutchanee Pholharn; John Morris
AIP Conf. Proc. 2065, 030019 (2019) https://doi.org/10.1063/1.5088277
View articletitled, Injection-molded poly(L-lactic acid)/poly(D-lactic acid) blends: Thermal and mechanical properties
Open the PDF for in another window
Effect of nucleating agent incorporation on mechanical, morphological, and rheological properties of in-situ copolymer polypropylene and PPH/POE blends
Mansour N. Al-Otaibi; Azzedine Kioul; Saeed Al-Zahrani
AIP Conf. Proc. 2065, 030020 (2019) https://doi.org/10.1063/1.5088278
View articletitled, Effect of nucleating agent incorporation on mechanical, morphological, and rheological properties of in-situ copolymer polypropylene and PPH/POE blends
Open the PDF for in another window
Coupled flow and fiber orientation analysis for 3D injection molding simulations of fiber composites
Huan-Chang Tseng; Tung-Huan Su
AIP Conf. Proc. 2065, 030021 (2019) https://doi.org/10.1063/1.5088279
View articletitled, Coupled flow and fiber orientation analysis for 3D injection molding simulations of fiber composites
Open the PDF for in another window
P-aminobenzoate intercalation into layered nickel hydroxide salt using a hydrothermal methodology: Synthesis, characterization, and evaluation as potential ultraviolet radiation absorber properties of polyethylene
Neffer Arvey Gomez Gomez; Andreas Leuteritz; Fernando Wypych
AIP Conf. Proc. 2065, 030022 (2019) https://doi.org/10.1063/1.5088280
View articletitled, P-aminobenzoate intercalation into layered nickel hydroxide salt using a hydrothermal methodology: Synthesis, characterization, and evaluation as potential ultraviolet radiation absorber properties of polyethylene
Open the PDF for in another window
Study on the influences on fiber micro-structure variations and the connection to final shrinkage/warpage on long fiber reinforced thermoplastics (FRT) parts
Chao-Tsai Huang; Chia Hsu; Cherng-En Yeh; Yi-Sheng Chen; Sheng-Jye Hwang; Hsin-Shu Peng; Chih-Che Wu; Chun-I Tu
AIP Conf. Proc. 2065, 030023 (2019) https://doi.org/10.1063/1.5088281
View articletitled, Study on the influences on fiber micro-structure variations and the connection to final shrinkage/warpage on long fiber reinforced thermoplastics (FRT) parts
Open the PDF for in another window
The influence of environmental aging on the material properties of back-molded composite sheets
Elmar Moritzer; Matthias Hüttner; Julian Wächter
AIP Conf. Proc. 2065, 030024 (2019) https://doi.org/10.1063/1.5088282
View articletitled, The influence of environmental aging on the material properties of back-molded composite sheets
Open the PDF for in another window
Manufacturing silk/epoxy composite laminates: Challenges and opportunities
Youssef K. Hamidi; M. Akif Yalcinkaya; Gorkem E. Guloglu; Maya Pishvar; Mehrad Amirkhosravi; M. Cengiz Altan
AIP Conf. Proc. 2065, 030025 (2019) https://doi.org/10.1063/1.5088283
View articletitled, Manufacturing silk/epoxy composite laminates: Challenges and opportunities
Open the PDF for in another window
Electron beam generated polymer-backbone-hydroperoxides trigger the crosslinking of glass fibre polypropylene interphase
Michael T. Müller; Carsten Zschech; Uwe Gohs
AIP Conf. Proc. 2065, 030026 (2019) https://doi.org/10.1063/1.5088284
View articletitled, Electron beam generated polymer-backbone-hydroperoxides trigger the crosslinking of glass fibre polypropylene interphase
Open the PDF for in another window
Prediction of moisture saturation levels for vinylester composite laminates: A data-driven approach for predicting the behavior of composite materials
Youssef K. Hamidi; Abdelaziz Berrado; M. Cengiz Altan
AIP Conf. Proc. 2065, 030027 (2019) https://doi.org/10.1063/1.5088285
View articletitled, Prediction of moisture saturation levels for vinylester composite laminates: A data-driven approach for predicting the behavior of composite materials
Open the PDF for in another window
Strain sensing behavior of conductive polymer/carbon nanotube composites coated fiber
Dong Xiang; Qin Chen; Yuntao Li
AIP Conf. Proc. 2065, 030028 (2019) https://doi.org/10.1063/1.5088286
View articletitled, Strain sensing behavior of conductive polymer/carbon nanotube composites coated fiber
Open the PDF for in another window
Observation of fiber orientation in injection molded long-fiber reinforced composites
Rahul Aditya; Sheng-Jye Hwang; Huei-Huang Lee
AIP Conf. Proc. 2065, 030029 (2019) https://doi.org/10.1063/1.5088287
View articletitled, Observation of fiber orientation in injection molded long-fiber reinforced composites
Open the PDF for in another window
High-speed melt spinning of sheath/core bicomponent fibers of poly(L-lactide)s with different molecular weight
N. Roungpaisan; W. Takarada; T. Kikutani
AIP Conf. Proc. 2065, 030030 (2019) https://doi.org/10.1063/1.5088288
View articletitled, High-speed melt spinning of sheath/core bicomponent fibers of poly(L-lactide)s with different molecular weight
Open the PDF for in another window
Enhanced performance of celluloce acetate/polyethylene glycol (CA/PEG) with the addition of functionalized carbon nanotube (CNT) prepared by wet-dry method
Siti Nurkhamidah; Yeni Rahmawati; Rizal Andhika Gumilang; Moch. Ilham Riswanda; Yusril Eka Fahrizal; Irham Hikmawan Ramadhan
AIP Conf. Proc. 2065, 030031 (2019) https://doi.org/10.1063/1.5088289
View articletitled, Enhanced performance of celluloce acetate/polyethylene glycol (CA/PEG) with the addition of functionalized carbon nanotube (CNT) prepared by wet-dry method
Open the PDF for in another window
Characterization of melt-mixing in extrusion: Finite-time Lyapunov exponent and flow pattern structure
Yasuya Nakayama; Takemitsu Hiroki; Toshihisa Kajiwara; Koichi Kimura; Takeuchi Takahide; Hideki Tomiyama
AIP Conf. Proc. 2065, 030032 (2019) https://doi.org/10.1063/1.5088290
View articletitled, Characterization of melt-mixing in extrusion: Finite-time Lyapunov exponent and flow pattern structure
Open the PDF for in another window
Investigation on the fiber compounding with a new type of compounding machine
Elmar Moritzer; Gilmar Heiderich; Cedric Geisler
AIP Conf. Proc. 2065, 030033 (2019) https://doi.org/10.1063/1.5088291
View articletitled, Investigation on the fiber compounding with a new type of compounding machine
Open the PDF for in another window
Numerical simulation of residence time, shear rates and throughput in single screw extruders considering wall shear rates
Elmar Moritzer; Marius Wittke; Gilmar Heiderich
AIP Conf. Proc. 2065, 030034 (2019) https://doi.org/10.1063/1.5088292
View articletitled, Numerical simulation of residence time, shear rates and throughput in single screw extruders considering wall shear rates
Open the PDF for in another window
New method to analyze the throughput-pressure behavior with the corrected twin screw channel geometry and the induced drag flow of screw elements by using 3D FEM simulation
Frederik Sporkmann; Volker Schöppner
AIP Conf. Proc. 2065, 030035 (2019) https://doi.org/10.1063/1.5088293
View articletitled, New method to analyze the throughput-pressure behavior with the corrected twin screw channel geometry and the induced drag flow of screw elements by using 3D FEM simulation
Open the PDF for in another window
Modeling of the dissipation in the solid conveying section in single screw extruders
Jan Trippe; Volker Schöppner
AIP Conf. Proc. 2065, 030036 (2019) https://doi.org/10.1063/1.5088294
View articletitled, Modeling of the dissipation in the solid conveying section in single screw extruders
Open the PDF for in another window
Calculation of the drying process of hygroscopic polymer pellets in desiccant dryers and with additional microwave application
Oliver Kast; Christian Bonten
AIP Conf. Proc. 2065, 030037 (2019) https://doi.org/10.1063/1.5088295
View articletitled, Calculation of the drying process of hygroscopic polymer pellets in desiccant dryers and with additional microwave application
Open the PDF for in another window
A new anisotropic flow simulation for compression molding of glass-mat thermoplastics
Anthony J. Favaloro; R. Byron Pipes; Huan-Chang Tseng
AIP Conf. Proc. 2065, 030038 (2019) https://doi.org/10.1063/1.5088296
View articletitled, A new anisotropic flow simulation for compression molding of glass-mat thermoplastics
Open the PDF for in another window
Computational analysis of transport across flake-filled composites of realistic microstructure
Andreas Tsiantis; Sholpan Sumbekova; Thanasis D. Papathanasiou
AIP Conf. Proc. 2065, 030039 (2019) https://doi.org/10.1063/1.5088297
View articletitled, Computational analysis of transport across flake-filled composites of realistic microstructure
Open the PDF for in another window
Analytical and numerical methods for optimizing screw geometries of an injection molding plasticizing unit with focus on standard three-section screws
Dominik Altmann; Thomas Köpplmayr; Georg Steinbichler
AIP Conf. Proc. 2065, 030040 (2019) https://doi.org/10.1063/1.5088298
View articletitled, Analytical and numerical methods for optimizing screw geometries of an injection molding plasticizing unit with focus on standard three-section screws
Open the PDF for in another window
Thermal conductivity measurement of industrial rubber compounds using laser flash analysis: Applicability, comparison and evaluation
M. Gschwandl; R. C. Kerschbaumer; B. Schrittesser; P. F. Fuchs; S. Stieger; L. Meinhart
AIP Conf. Proc. 2065, 030041 (2019) https://doi.org/10.1063/1.5088299
View articletitled, Thermal conductivity measurement of industrial rubber compounds using laser flash analysis: Applicability, comparison and evaluation
Open the PDF for in another window
Measurement of gas-vent clogging ratio using evaluation mold of gas-vent performance
Eisaku Shimomura; Michihiro Tatsuno; Hidetoshi Yokoi
AIP Conf. Proc. 2065, 030042 (2019) https://doi.org/10.1063/1.5088300
View articletitled, Measurement of gas-vent clogging ratio using evaluation mold of gas-vent performance
Open the PDF for in another window
Hierarchical multi-mode molecular stress function (HMMSF) model for linear and LCB polymer melts
Esmaeil Narimissa; Manfred H. Wagner
AIP Conf. Proc. 2065, 030043 (2019) https://doi.org/10.1063/1.5088301
View articletitled, Hierarchical multi-mode molecular stress function (HMMSF) model for linear and LCB polymer melts
Open the PDF for in another window
Investigation of molecular weight distributions during extrusion process of polypropylene by rheometry experiment
Hoda Bayazian; Volker Schoeppner
AIP Conf. Proc. 2065, 030044 (2019) https://doi.org/10.1063/1.5088302
View articletitled, Investigation of molecular weight distributions during extrusion process of polypropylene by rheometry experiment
Open the PDF for in another window
Influence of polymer-particle-interaction on the flow behavior of highly filled plastics
J. Benz; C. Bonten
AIP Conf. Proc. 2065, 030045 (2019) https://doi.org/10.1063/1.5088303
View articletitled, Influence of polymer-particle-interaction on the flow behavior of highly filled plastics
Open the PDF for in another window
Effects of poly(lactic acid) and polybutylene succinate ratios on properties of composite foams containing activated carbons
Darunee Aussawasathien; Kittimasak Ketkul; Kittipong Hrimchum; Poonsub Threepopnatkul
AIP Conf. Proc. 2065, 030046 (2019) https://doi.org/10.1063/1.5088304
View articletitled, Effects of poly(lactic acid) and polybutylene succinate ratios on properties of composite foams containing activated carbons
Open the PDF for in another window
Influence of low heat conductive inserts on morphology of foam injection molded parts
Katharina Krause; Thomas Neumeyer; Christin Baumgart; Volker Altstaedt
AIP Conf. Proc. 2065, 030047 (2019) https://doi.org/10.1063/1.5088305
View articletitled, Influence of low heat conductive inserts on morphology of foam injection molded parts
Open the PDF for in another window
Development of measurement method for determination of dynamic solubility limits in injection foam molding
Clemens Kastner; Georg Steinbichler
AIP Conf. Proc. 2065, 030048 (2019) https://doi.org/10.1063/1.5088306
View articletitled, Development of measurement method for determination of dynamic solubility limits in injection foam molding
Open the PDF for in another window
Thermoforming simulation of heat conductive plastic materials using the K-BKZ model
Kai Landsecker; Christian Bonten
AIP Conf. Proc. 2065, 030049 (2019) https://doi.org/10.1063/1.5088307
View articletitled, Thermoforming simulation of heat conductive plastic materials using the K-BKZ model
Open the PDF for in another window
Influence of novel screw elements on the reactive extrusion of low density polyethylene grafted with maleic anhydride in co-rotating twin screw extruder
Ma Xiuqing; Zhai Wenbin; Liu Min
AIP Conf. Proc. 2065, 030050 (2019) https://doi.org/10.1063/1.5088308
View articletitled, Influence of novel screw elements on the reactive extrusion of low density polyethylene grafted with maleic anhydride in co-rotating twin screw extruder
Open the PDF for in another window
Crosslinked polyolefins using a modified filler
A. Uray; G. Riess; T. Lucyshyn; C. Holzer; W. Kern
AIP Conf. Proc. 2065, 030051 (2019) https://doi.org/10.1063/1.5088309
View articletitled, Crosslinked polyolefins using a modified filler
Open the PDF for in another window
Modeling morphology distribution within injection molded parts
Vito Speranza; Sara Liparoti; Roberto Pantani; Giuseppe Titomanlio
AIP Conf. Proc. 2065, 030052 (2019) https://doi.org/10.1063/1.5088310
View articletitled, Modeling morphology distribution within injection molded parts
Open the PDF for in another window
Evolution of additively manufactured injection molding inserts investigated by thermal simulations
Thomas Hofstätter; David B. Pedersen; Guido Tosello; Hans N. Hansen
AIP Conf. Proc. 2065, 030053 (2019) https://doi.org/10.1063/1.5088311
View articletitled, Evolution of additively manufactured injection molding inserts investigated by thermal simulations
Open the PDF for in another window
Internal fiber structure of a high-performing, additively manufactured injection molding insert
Thomas Hofstätter; Sina Baier; Camilla H. Trinderup; Carsten Gundlach; David B. Pedersen; Guido Tosello; Hans N. Hansen
AIP Conf. Proc. 2065, 030054 (2019) https://doi.org/10.1063/1.5088312
View articletitled, Internal fiber structure of a high-performing, additively manufactured injection molding insert
Open the PDF for in another window
Fusion-bonding behavior of plasticized corn proteins in fused deposition modeling process
Laurent Chaunier; Benoît Duchemin; Estelle Couallier; Guy Della Valle; Denis Lourdin; Anne-Laure Reguerre; Eric Leroy
AIP Conf. Proc. 2065, 030055 (2019) https://doi.org/10.1063/1.5088313
View articletitled, Fusion-bonding behavior of plasticized corn proteins in fused deposition modeling process
Open the PDF for in another window
Development and modeling of design and process guidelines for FDM structures for the partial reinforcement of hybrid structures
Elmar Moritzer; Andre Hirsch; Franziska Bürenhaus
AIP Conf. Proc. 2065, 030056 (2019) https://doi.org/10.1063/1.5088314
View articletitled, Development and modeling of design and process guidelines for FDM structures for the partial reinforcement of hybrid structures
Open the PDF for in another window
A method to evaluate the process-specific warpage for different polymers in the FDM process
Christian Schumacher; Volker Schöppner; Camilla Fels
AIP Conf. Proc. 2065, 030057 (2019) https://doi.org/10.1063/1.5088315
View articletitled, A method to evaluate the process-specific warpage for different polymers in the FDM process
Open the PDF for in another window
Optimization of material properties for highly-filled thermoplastic polymers used in fused filament fabrication of ceramics
Santiago Cano; Hrvoje Cajner; Joamin Gonzalez-Gutierrez; Janak Sapkota; Christian Kukla; Florian Arbeiter; Stephan Schuschnigg; Clemens Holzer
AIP Conf. Proc. 2065, 030058 (2019) https://doi.org/10.1063/1.5088316
View articletitled, Optimization of material properties for highly-filled thermoplastic polymers used in fused filament fabrication of ceramics
Open the PDF for in another window
The study on polypropylene applied in fused deposition modeling
Mu Dong; Shijun Zhang; Dali Gao; Baige Chou
AIP Conf. Proc. 2065, 030059 (2019) https://doi.org/10.1063/1.5088317
View articletitled, The study on polypropylene applied in fused deposition modeling
Open the PDF for in another window
Bio-inspired polyethylene-based composite reinforced by thermoplastic polyurethane (TPU) fiber for aerogel production
Solmaz Karamikamkar; Sasan Rezaie; Hani E. Naguib; Chul B. Park
AIP Conf. Proc. 2065, 030060 (2019) https://doi.org/10.1063/1.5088318
View articletitled, Bio-inspired polyethylene-based composite reinforced by thermoplastic polyurethane (TPU) fiber for aerogel production
Open the PDF for in another window
Highly structured graphene polyethylene nanocomposites
Karolina Gaska; Roland Kádár; Xiangdong Xu; Stanislaw Gubanski; Christian Müller; Santosh Pandit; Venkata R. S. S. Mokkapati; Ivan Mijakovic; Andrzej Rybak; Artur Siwek; Magnus Svensson
AIP Conf. Proc. 2065, 030061 (2019) https://doi.org/10.1063/1.5088319
View articletitled, Highly structured graphene polyethylene nanocomposites
Open the PDF for in another window
Modified lyocell process for producing biopolymer fiber
Ashwini Lidhure; Sachin Jadhav; Vivek Ganvir; Shirish Thakre
AIP Conf. Proc. 2065, 030062 (2019) https://doi.org/10.1063/1.5088320
View articletitled, Modified lyocell process for producing biopolymer fiber
Open the PDF for in another window
The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding
Shia-Chung Chen; Chen-Yuan Chung; Ya-Lin Tseng
AIP Conf. Proc. 2065, 040001 (2019) https://doi.org/10.1063/1.5088321
View articletitled, The influence of magnetic fiber orientation on the electric properties of conductive polymer composite material by using magnetic-assisted injection molding
Open the PDF for in another window
Innovative design and simulation study of a mould for rapid temperature control in micro-injection moulding
Annarita De Meo; Felice De Santis; Vito Speranza; Ben Whiteside; Phil D. Coates; Roberto Pantani
AIP Conf. Proc. 2065, 040002 (2019) https://doi.org/10.1063/1.5088322
View articletitled, Innovative design and simulation study of a mould for rapid temperature control in micro-injection moulding
Open the PDF for in another window
Preparation and properties of biocompatible PCL-PEG-PCL(PCEC)
Yazhi Zhu; Mingqiang Zhong; Feng Chen
AIP Conf. Proc. 2065, 040003 (2019) https://doi.org/10.1063/1.5088323
View articletitled, Preparation and properties of biocompatible PCL-PEG-PCL(PCEC)
Open the PDF for in another window
Preparation and properties of a pH-responsive PDMS platform
Xiaojuan Wei; Wei Fang; Feng Chen; Mingqiang Zhong
AIP Conf. Proc. 2065, 040004 (2019) https://doi.org/10.1063/1.5088324
View articletitled, Preparation and properties of a pH-responsive PDMS platform
Open the PDF for in another window
Effect of impurity content on long term performance of recycled HDPE for structural application
Gibran da Cunha Vasconcelos; Bianca Beatriz Basso; Ticiane Sanches Valera
AIP Conf. Proc. 2065, 040005 (2019) https://doi.org/10.1063/1.5088325
View articletitled, Effect of impurity content on long term performance of recycled HDPE for structural application
Open the PDF for in another window
Influence of expandable graphite on mechanical properties and flame retardant properties of high density polyethylene
Ma Xiuqing; Liu Min; Zhai Wenbin; Ge Mingjie
AIP Conf. Proc. 2065, 040006 (2019) https://doi.org/10.1063/1.5088326
View articletitled, Influence of expandable graphite on mechanical properties and flame retardant properties of high density polyethylene
Open the PDF for in another window
Effect of addition of PP-g-MA on the tribological properties of hemp fiber reinforced plant-derived Polyamide1010 biomass composites
Yosuke Nishitani; Yurika Ito; Tetsuto Kajiyama
AIP Conf. Proc. 2065, 040007 (2019) https://doi.org/10.1063/1.5088327
View articletitled, Effect of addition of PP-g-MA on the tribological properties of hemp fiber reinforced plant-derived Polyamide1010 biomass composites
Open the PDF for in another window
Influence of addition of PTFE on the tribological properties of CF reinforced plant-derived semi-aromatic polyamide (PA10T) biomass composites
Takayuki Ono; Yosuke Nishitani
AIP Conf. Proc. 2065, 040008 (2019) https://doi.org/10.1063/1.5088328
View articletitled, Influence of addition of PTFE on the tribological properties of CF reinforced plant-derived semi-aromatic polyamide (PA10T) biomass composites
Open the PDF for in another window
Enhanced electromagnetic interference shielding effectiveness of hybrid fillers by segregated structure
Abilash Mende Anjaneyalu; Ali Shayesteh Zeraati; Uttandaraman Sundararaj
AIP Conf. Proc. 2065, 040009 (2019) https://doi.org/10.1063/1.5088329
View articletitled, Enhanced electromagnetic interference shielding effectiveness of hybrid fillers by segregated structure
Open the PDF for in another window
Preparation and properties of damping materials in multi-phase system
Yanpei Fei; Wei Fang; Mingqiang Zhong; Jiangming Jin; Jingtao Yang; Lixin Xu; Feng Chen
AIP Conf. Proc. 2065, 040010 (2019) https://doi.org/10.1063/1.5088330
View articletitled, Preparation and properties of damping materials in multi-phase system
Open the PDF for in another window
Preparation of cellulose/MWCNTs/TPU micro-foam composites
Wei Fang; Yanpei Fei; Xiaojuan Wei; Mingqiang Zhong; Feng Chen
AIP Conf. Proc. 2065, 040011 (2019) https://doi.org/10.1063/1.5088331
View articletitled, Preparation of cellulose/MWCNTs/TPU micro-foam composites
Open the PDF for in another window
The experimental research of nylon 6 blends with low-density polyethylene (PA6/LDPE) blends and its cast film
Ma Xiuqinga; Liu Min; Zhai Wenbin
AIP Conf. Proc. 2065, 040012 (2019) https://doi.org/10.1063/1.5088332
View articletitled, The experimental research of nylon 6 blends with low-density polyethylene (PA6/LDPE) blends and its cast film
Open the PDF for in another window
Development of polyimide membrane for solvent resistant filtration
Shang-Chih Chou; Jun-Hong Chen; Jun-Hong Lin; Shou-Chi Tseng
AIP Conf. Proc. 2065, 040013 (2019) https://doi.org/10.1063/1.5088333
View articletitled, Development of polyimide membrane for solvent resistant filtration
Open the PDF for in another window
Interface analysis of three-layer co-extrusion blown film
Ma Xiuqing; Zhai Wenbin; Liu Ming
AIP Conf. Proc. 2065, 040014 (2019) https://doi.org/10.1063/1.5088334
View articletitled, Interface analysis of three-layer co-extrusion blown film
Open the PDF for in another window
Evaluation of morphology and crystallinity of biaxially oriented polypropylene films
Hoda Bayazian; Ali Yadgari; Jalil Morshedian; Ahmad Jamshidi; Mohammad Razavi-Nouri
AIP Conf. Proc. 2065, 040015 (2019) https://doi.org/10.1063/1.5088335
View articletitled, Evaluation of morphology and crystallinity of biaxially oriented polypropylene films
Open the PDF for in another window
Phytochemical analysis of bioactive compounds in ethanolic extract of Sterculia quadrifida R.Br.
MRI image processing method on brain tumors: A review
The design and optimization process of ball mill to reduce particle size of calcium carbonate materials
  • Online ISSN 1551-7616
  • Print ISSN 0094-243X

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

  • © Copyright AIP
Close Modal
This Feature Is Available To Subscribers Only

or Create an Account

Close Modal
Close Modal