Skip Nav Destination
Issues
PRELIMINARY
Preface: Proceedings of the Europe/Africa Conference Dresden 2017 Polymer Processing Society PPS
AIP Conf. Proc. 2055, 010001 (2019)
https://doi.org/10.1063/1.5084801
SESSION S01 - MXINING AND COMPOUNDING
Compounding anionic polymerized polyamide 6 using terephthalic acid
AIP Conf. Proc. 2055, 020002 (2019)
https://doi.org/10.1063/1.5084803
Modified polylactide with improved properties for extrusion foaming
AIP Conf. Proc. 2055, 020003 (2019)
https://doi.org/10.1063/1.5084804
Saw dust reinforced toughened polypropylene (PP/EPDM/talc): Effect of plasticizer incorporation
AIP Conf. Proc. 2055, 020005 (2019)
https://doi.org/10.1063/1.5084806
Interaction between coolant, polyamide 6.6, glass fibers and additives
AIP Conf. Proc. 2055, 020006 (2019)
https://doi.org/10.1063/1.5084807
Analysis of the process behavior of co-kneaders
AIP Conf. Proc. 2055, 020007 (2019)
https://doi.org/10.1063/1.5084808
A novel experimental setup for characterization of polymer blends in single-screw extruders
AIP Conf. Proc. 2055, 020008 (2019)
https://doi.org/10.1063/1.5084809
Cross-linked polyethylene (XLPE) as filler in high-density polyethylene: Effect of content and particle size
AIP Conf. Proc. 2055, 020009 (2019)
https://doi.org/10.1063/1.5084810
SESSION S02 - POLYMER BLENDS AND ALLOYS
Development of a block copolymer for impact modification of polyhydroxybutyrate (PHB)
AIP Conf. Proc. 2055, 030001 (2019)
https://doi.org/10.1063/1.5084811
Recycled polycarbonate as impact modifier in polypropylene
AIP Conf. Proc. 2055, 030004 (2019)
https://doi.org/10.1063/1.5084814
Compatibilization of PET-PE blends for the recycling of multilayer packaging foils
AIP Conf. Proc. 2055, 030005 (2019)
https://doi.org/10.1063/1.5084815
SESSION S03 - RHEOLOGY AND PROCESS SIMULATION
Evaluation of the influence of the tool surface on polymer melt flow using a novel rheological extrusion slit die
AIP Conf. Proc. 2055, 040001 (2019)
https://doi.org/10.1063/1.5084816
Effects of interparticle interactions on the flow behaviour of low density polyethylene filled with various fillers
AIP Conf. Proc. 2055, 040002 (2019)
https://doi.org/10.1063/1.5084817
SESSION S04 - FUNCTIONAL, NANO AND BIO COMPOSITES
Friction and wear properties of recycled natural fiber reinforced plant-derived polyamide 1010 biomass composites
AIP Conf. Proc. 2055, 050001 (2019)
https://doi.org/10.1063/1.5084820
Study of modified LDHs as UV protecting materials for polypropylene (PP)
AIP Conf. Proc. 2055, 050002 (2019)
https://doi.org/10.1063/1.5084821
Mechanochemical synthesis of layered double hydroxides
AIP Conf. Proc. 2055, 050009 (2019)
https://doi.org/10.1063/1.5084828
Temperature effects on the dissolution-precipitation synthesis of hydrocalumite
AIP Conf. Proc. 2055, 050010 (2019)
https://doi.org/10.1063/1.5084829
Flame retardant properties of polymer composites of urea complex of magnesium and vermiculite
AIP Conf. Proc. 2055, 050011 (2019)
https://doi.org/10.1063/1.5084830
SESSION S05 - FIBERS, FILMS AND FOAMS
Silver modified polyarylonitrile-activated carbon composite fibers via electrospinning process
AIP Conf. Proc. 2055, 060001 (2019)
https://doi.org/10.1063/1.5084833
New fibers from PCM using the conventional melt spinning process
AIP Conf. Proc. 2055, 060002 (2019)
https://doi.org/10.1063/1.5084834
Effect of extrusion parameters and nanofillers on mechanical properties of PPSU tufting yarns
AIP Conf. Proc. 2055, 060003 (2019)
https://doi.org/10.1063/1.5084835
Development of a bead foam based on the engineering polymer polybutylene terephthalate
AIP Conf. Proc. 2055, 060004 (2019)
https://doi.org/10.1063/1.5084836
The evaluation of biaxial stretchability of polypropylene films using a newly developed test machine
AIP Conf. Proc. 2055, 060005 (2019)
https://doi.org/10.1063/1.5084837
Dynamics and structure development for biaxial stretching PA6 films
AIP Conf. Proc. 2055, 060006 (2019)
https://doi.org/10.1063/1.5084838
Recycling of composites – A new approach minimizes downgrading
Jochen Wellekötter; Stephan Baz; Johannes Schwingel; Götz Theo Gresser; Peter Middendorf; Christian Bonten
AIP Conf. Proc. 2055, 060009 (2019)
https://doi.org/10.1063/1.5084841
In-situ observation of multiple-necking behavior in continuous cold drawing of PET filaments in ethanol
AIP Conf. Proc. 2055, 060010 (2019)
https://doi.org/10.1063/1.5084842
Foam injection molding of magneto sensitive polymer composites
AIP Conf. Proc. 2055, 060012 (2019)
https://doi.org/10.1063/1.5084844
SESSION S06 - INJECTION MOLDING AND EXTRUSION
Morphology-property behavior of semi crystalline polymers in injection molded parts
AIP Conf. Proc. 2055, 070002 (2019)
https://doi.org/10.1063/1.5084846
Shrinkage, warpage and residual stresses of injection molded parts
AIP Conf. Proc. 2055, 070003 (2019)
https://doi.org/10.1063/1.5084847
A concept of an injection compression mould for non-invasive ultrasound tomographic temperature measurements
AIP Conf. Proc. 2055, 070004 (2019)
https://doi.org/10.1063/1.5084848
Characterization of bulk materials for single screw extrusion by means of fluidization testing
AIP Conf. Proc. 2055, 070005 (2019)
https://doi.org/10.1063/1.5084849
Mechanical characterization of iPP injection molded samples on multiple length scale
AIP Conf. Proc. 2055, 070006 (2019)
https://doi.org/10.1063/1.5084850
New approach for the efficient attainment of flame retardancy using multi component injection molding
AIP Conf. Proc. 2055, 070007 (2019)
https://doi.org/10.1063/1.5084851
Design and extrusion of high-performance polyetherimide pipes with variable wall thickness for aircrafts
AIP Conf. Proc. 2055, 070008 (2019)
https://doi.org/10.1063/1.5084852
Smart data analysis for optimized manufacturing of powder coatings on co-rotating twin screw extruders
AIP Conf. Proc. 2055, 070010 (2019)
https://doi.org/10.1063/1.5084854
Effects of pellet characteristics and feed zone design on the output of grooved-feed extruders at high screw speeds
AIP Conf. Proc. 2055, 070011 (2019)
https://doi.org/10.1063/1.5084855
Investigation of residence time distribution of different screw-barrel concepts via ultrasound in extrusion
AIP Conf. Proc. 2055, 070012 (2019)
https://doi.org/10.1063/1.5084856
Investigation of the melt quality of a double wave screw in a grooved plasticizing zone
AIP Conf. Proc. 2055, 070013 (2019)
https://doi.org/10.1063/1.5084857
Mechanical property model for fiber filled thermoplastics incorporating surface tension
AIP Conf. Proc. 2055, 070014 (2019)
https://doi.org/10.1063/1.5084858
Experimental analysis of conformal cooling in SLM produced injection moulds: Effects on process and product quality
AIP Conf. Proc. 2055, 070017 (2019)
https://doi.org/10.1063/1.5084861
Bubble-free polymer devolatilization in a simplified extruder model
AIP Conf. Proc. 2055, 070018 (2019)
https://doi.org/10.1063/1.5084862
Simulation of the effects of using conformal cooling channels in SLM produced plastic extrusion calibrators
AIP Conf. Proc. 2055, 070019 (2019)
https://doi.org/10.1063/1.5084863
Online analysis of melt viscosity during injection moulding with a hot runner rheometer
AIP Conf. Proc. 2055, 070022 (2019)
https://doi.org/10.1063/1.5084866
Waste heat utilization for granule preheating in extrusion processes to increase energy efficiency
AIP Conf. Proc. 2055, 070025 (2019)
https://doi.org/10.1063/1.5084869
Combining thermoset and rubber by injection molding - Characterization of factors determining compound properties
AIP Conf. Proc. 2055, 070026 (2019)
https://doi.org/10.1063/1.5084870
Influence of hygro-thermal loads on the durability of thermoplastic-polyurethane-steel-hybrids
AIP Conf. Proc. 2055, 070027 (2019)
https://doi.org/10.1063/1.5084871
Knowledge-based material selection for injection-molded, thermoplastic parts
AIP Conf. Proc. 2055, 070028 (2019)
https://doi.org/10.1063/1.5084872
Thermoforming – determining temperature profiles across sheet thickness by pyrometric measurements
AIP Conf. Proc. 2055, 070029 (2019)
https://doi.org/10.1063/1.5084873
Improvement of the reproduction accuracy of a defined pole length of injection molded encoder wheels
AIP Conf. Proc. 2055, 070030 (2019)
https://doi.org/10.1063/1.5084874
SESSION S07 - ELASTOMER MATERIALS AND PROCESSING
Morphology-property-relationships of SEBS/PP compounds for medical application
AIP Conf. Proc. 2055, 080001 (2019)
https://doi.org/10.1063/1.5084875
Simulative and experimental investigation of rapid heat cycle molding for rubbers
AIP Conf. Proc. 2055, 080003 (2019)
https://doi.org/10.1063/1.5084877
SESSION S08 - NANOCARBON BASED COMPOSITES, WITH CNPCOMP2017
Development of polymer composites containing nano-carbon materials by high-pressure fluid mixing method
AIP Conf. Proc. 2055, 090001 (2019)
https://doi.org/10.1063/1.5084879
Mechanical properties of carbon monoxide reduced graphene–polyamide-6 nanocomposites prepared by melt-mixing
AIP Conf. Proc. 2055, 090002 (2019)
https://doi.org/10.1063/1.5084880
Reactive coagulation of single-walled carbon nanotubes for tougher composites – Solution processing and assembly
AIP Conf. Proc. 2055, 090005 (2019)
https://doi.org/10.1063/1.5084883
Influence of a supplemental filler in twin-screw extruded PP/CNT composites using masterbatch dilution
AIP Conf. Proc. 2055, 090006 (2019)
https://doi.org/10.1063/1.5084884
Understanding the enhancement of Young’s modulus of macroscopic carbon nanotube fibers after polymer infiltration
AIP Conf. Proc. 2055, 090008 (2019)
https://doi.org/10.1063/1.5084886
Advanced electrically conductive adhesives for high complexity PCB assembly
AIP Conf. Proc. 2055, 090009 (2019)
https://doi.org/10.1063/1.5084887
Improving the processability of graphene nanoplatelets in polyamide 6 during melt compounding extrusion
AIP Conf. Proc. 2055, 090010 (2019)
https://doi.org/10.1063/1.5084888
SESSION S09 - POLYMER MODIFICATION WITH IONIZING RADIATION
SESSION S10 - NANO- AND MICROSTRUCTURED SURFACES AND FILMS
Determination of influencing factors on adhesion and surface quality in the UV-based in-mold coating process of BMC
AIP Conf. Proc. 2055, 110001 (2019)
https://doi.org/10.1063/1.5084890
SESSION S11 - IN-LINE ANALYTICS AND PROCESS MONITORING
Non-contact inline monitoring of thermoplastic CFRP tape quality using air-coupled ultrasound
AIP Conf. Proc. 2055, 120001 (2019)
https://doi.org/10.1063/1.5084891
Nondestructive testing of 3D-hybrid components using air-coupled ultrasound
AIP Conf. Proc. 2055, 120002 (2019)
https://doi.org/10.1063/1.5084892
CFRP pipe inspection by means of air-coupled ultrasound
AIP Conf. Proc. 2055, 120003 (2019)
https://doi.org/10.1063/1.5084893
Local defect resonance excitation thermography for damage detection in plastic composites
AIP Conf. Proc. 2055, 120004 (2019)
https://doi.org/10.1063/1.5084894
Inline melt homogeneity measurement in injection molding
AIP Conf. Proc. 2055, 120006 (2019)
https://doi.org/10.1063/1.5084896
SESSION S12 - WELDING AND JOINING TECHNOLOGY
Infrared welding of continuous fibre-reinforced thermoplastics – Investigations on overlapping joints
AIP Conf. Proc. 2055, 130002 (2019)
https://doi.org/10.1063/1.5084899
SESSION S14 - ADDITIVE MANUFACTORING
Temperature induced ageing of PA12 powder during selective laser sintering process
AIP Conf. Proc. 2055, 140001 (2019)
https://doi.org/10.1063/1.5084904
Production of spherical micron-sized polymer particles for additive manufacturing by liquid phase processes
AIP Conf. Proc. 2055, 140002 (2019)
https://doi.org/10.1063/1.5084905
Understanding the temperature field in fused filament fabrication for enhanced mechanical part performance
AIP Conf. Proc. 2055, 140003 (2019)
https://doi.org/10.1063/1.5084906
A new approach for getting more homogeneous temperature fields in selective laser sintering of polymers
AIP Conf. Proc. 2055, 140004 (2019)
https://doi.org/10.1063/1.5084907
Developing a patient individualized flexible silicone implant using SLS and vacuum die casting
AIP Conf. Proc. 2055, 140005 (2019)
https://doi.org/10.1063/1.5084908
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Students’ mathematical conceptual understanding: What happens to proficient students?
Dian Putri Novita Ningrum, Budi Usodo, et al.