Skip Nav Destination
Issues
13 November 2018
-
Cover Image
Cover Image
PRELIMINARY
SESSION - 1
The effect of engine throttle position on the performance characteristics of a crank-rocker engine fitted with a conventional cylinder head
Ramtin. Kardan; M. B. Baharom; Salah E. Mohammed; A. Rashid A. Aziz; Ezrann Z. Zainal A.; Firmansyah
AIP Conf. Proc. 2035, 020001 (2018)
https://doi.org/10.1063/1.5075549
Study for the optimum uptake capacity of silica gel used in a solar adsorption chiller
AIP Conf. Proc. 2035, 020004 (2018)
https://doi.org/10.1063/1.5075552
Comparison of different turbulence models in pipe flow of various Reynolds numbers
AIP Conf. Proc. 2035, 020005 (2018)
https://doi.org/10.1063/1.5075553
Numerical investigation on the heat transfer of wellbore heat extractor
AIP Conf. Proc. 2035, 020006 (2018)
https://doi.org/10.1063/1.5075554
Development of multi chamber technique to improve the uniformity in drying application
AIP Conf. Proc. 2035, 020007 (2018)
https://doi.org/10.1063/1.5075555
SESSION - 2
Study on the performance analysis of stratified thermal energy storage system of a district cooling plant
AIP Conf. Proc. 2035, 030001 (2018)
https://doi.org/10.1063/1.5075557
Simulation of swirling wet steam flow through a supersonic nozzle
AIP Conf. Proc. 2035, 030002 (2018)
https://doi.org/10.1063/1.5075558
Simulation study on impact of fine sand particle to 90° steel elbow in pipe
AIP Conf. Proc. 2035, 030003 (2018)
https://doi.org/10.1063/1.5075559
Corrosion under insulation rate prediction model for piping by two stages of artificial neural network
AIP Conf. Proc. 2035, 030004 (2018)
https://doi.org/10.1063/1.5075560
A review on the operating characteristics of free piston engine and its recent developments
AIP Conf. Proc. 2035, 030007 (2018)
https://doi.org/10.1063/1.5075563
Model for simulation based investigations of fuel systems for CNG powered engines
AIP Conf. Proc. 2035, 030008 (2018)
https://doi.org/10.1063/1.5075564
SESSION - 3
CFD based investigation on effect of classifier blade length to coal particle distribution in coal pulverizer
AIP Conf. Proc. 2035, 040001 (2018)
https://doi.org/10.1063/1.5075565
Design and implementation of solar powered stirling engines: Review
AIP Conf. Proc. 2035, 040002 (2018)
https://doi.org/10.1063/1.5075566
Performance investigation on an integrated multi-stage cylindrical-tank solar water heater
AIP Conf. Proc. 2035, 040003 (2018)
https://doi.org/10.1063/1.5075567
Wind resource forecasting using enhanced measure correlate predict (MCP)
AIP Conf. Proc. 2035, 040005 (2018)
https://doi.org/10.1063/1.5075569
Heat transfer enhancement with nanofluids: A review on recent applications and experiments
AIP Conf. Proc. 2035, 040006 (2018)
https://doi.org/10.1063/1.5075570
Unleash the potential of additive manufacturing with topology optimization
AIP Conf. Proc. 2035, 040007 (2018)
https://doi.org/10.1063/1.5075571
SESSION - 4
Two-phase slug flow separation at T-junction with regular and reduced vertical side arm
AIP Conf. Proc. 2035, 050001 (2018)
https://doi.org/10.1063/1.5075572
Investigation of late fuel injection position on the combustion of free piston engine
AIP Conf. Proc. 2035, 050002 (2018)
https://doi.org/10.1063/1.5075573
A review on free piston linear engine (FPLE)
S. Norazilah A. Tamili; A. Rashid A. Aziz; Shaharin A. Sulaiman; Ezrann Z. Zainal; Firmansyah; M. R. Heikal
AIP Conf. Proc. 2035, 050003 (2018)
https://doi.org/10.1063/1.5075574
Bouncing phenomena of free piston linear generator at starting process
M. Noraiman M. Jaffry; Z. A. Abdul Karim; N. A. Ramlan; Salah E. Mohammed; Ezrann Z. Zainal A.; Firmansyah; A. S. Ahmad; M. B. Baharom; M. R. Heikal; A. Rashid A. Aziz
AIP Conf. Proc. 2035, 050004 (2018)
https://doi.org/10.1063/1.5075575
Microstructural analysis on underwater friction stir welded 5052 aluminium alloy
AIP Conf. Proc. 2035, 050005 (2018)
https://doi.org/10.1063/1.5075576
Developing renewable energy alternative resources evaluation model based on multiple criteria
AIP Conf. Proc. 2035, 050006 (2018)
https://doi.org/10.1063/1.5075577
The effect of unstable emulsion of water-in-diesel on micro-explosion phenomena
AIP Conf. Proc. 2035, 050007 (2018)
https://doi.org/10.1063/1.5075578
Low-speed pre-ignition in gasoline, turbo-charged, direct injection engines: An analysis of engine testing data
AIP Conf. Proc. 2035, 050009 (2018)
https://doi.org/10.1063/1.5075580
SESSION - 5
Study the effect of plasma jet on the gas dynamic at the jet-substrate contact surface
AIP Conf. Proc. 2035, 060001 (2018)
https://doi.org/10.1063/1.5075581
Desıgn and development of casted staın less steel Y-Tee joınt for oıl and gas applıcatıon
AIP Conf. Proc. 2035, 060002 (2018)
https://doi.org/10.1063/1.5075582
Investigation on intake manifold volume in free-piston linear generator engine
Muhammad Muzani Masri; Evelyn Evelyn; Ahmad Shahrul Ahmad; Siti Norazilah Ahmad Tamili; Ezrann Zharif Zainal Abidin; Firmansyah Firmansyah; Abd Rashid Abd Aziz; Morgan Raymond Heikal
AIP Conf. Proc. 2035, 060004 (2018)
https://doi.org/10.1063/1.5075584
Effect of back rake angle and shape on wear rate of PDC cutter in hard formation
AIP Conf. Proc. 2035, 060005 (2018)
https://doi.org/10.1063/1.5075585
Performance investigation of a roof top solar chimney at various inclinations
AIP Conf. Proc. 2035, 060006 (2018)
https://doi.org/10.1063/1.5075586
The effect of CO2-H2S on corrosion of low alloy steel 3%Cr in high partial pressure CO2 environments
AIP Conf. Proc. 2035, 060007 (2018)
https://doi.org/10.1063/1.5075587
Energy harvesting and power generation from stairs
AIP Conf. Proc. 2035, 060008 (2018)
https://doi.org/10.1063/1.5075588
Life extension program and refurbishment of gas turbine parts after 100,000 EOH
AIP Conf. Proc. 2035, 060009 (2018)
https://doi.org/10.1063/1.5075589
Diesel-natural gas engine emissions and performance
AIP Conf. Proc. 2035, 060010 (2018)
https://doi.org/10.1063/1.5075590
SESSION - 6
Design and development of mini hydropower system integrated for commercial building
AIP Conf. Proc. 2035, 070006 (2018)
https://doi.org/10.1063/1.5075596
CFD simulation of liquid-to-air membrane energy exchangers (LAMEE): Flat plate exchanger effectiveness
AIP Conf. Proc. 2035, 070007 (2018)
https://doi.org/10.1063/1.5075597
Characterization of tin oxide (SnO2) nanostructures prepared by thermal oxidation
AIP Conf. Proc. 2035, 070009 (2018)
https://doi.org/10.1063/1.5075599
SESSION - 7
Prediction of performance parameters of stratified TES tank using artificial neural network
AIP Conf. Proc. 2035, 080001 (2018)
https://doi.org/10.1063/1.5075600
Nano-silica effect on the poly (1, 8-octanediol citrate) composite properties for bone plate application
AIP Conf. Proc. 2035, 080002 (2018)
https://doi.org/10.1063/1.5075601
Effect of pressure in crossover port to the in-cylinder flow of split-cycle engine
AIP Conf. Proc. 2035, 080003 (2018)
https://doi.org/10.1063/1.5075602
Effect of bauxite residue on the corrosion resistance of an intumescent paint coated steel plate
AIP Conf. Proc. 2035, 080005 (2018)
https://doi.org/10.1063/1.5075604
Influence of silica and chemical modification on dispersion of carbon black nanoparticles in epoxy resin
AIP Conf. Proc. 2035, 080006 (2018)
https://doi.org/10.1063/1.5075605
Ultrafast-contactless plasma arc sintering
Thar M. Badri Albarody; Husam Kareem Mohsin Al-Jothery; Alaa Raad Hussein; Loh Zi Teng; Ali Samer Muhsan; Faiz Ahmad
AIP Conf. Proc. 2035, 080008 (2018)
https://doi.org/10.1063/1.5075607
Effect of dispersing agent on the thermal properties of basalt fibre reinforced intumescent coating
AIP Conf. Proc. 2035, 080009 (2018)
https://doi.org/10.1063/1.5075608