Skip Nav Destination
Issues
PRELIMINARY
ARTICLES
Influence of firing temperature and compacting pressure on density and Young’s modulus of electroporcelain
AIP Conf. Proc. 1988, 020001 (2018)
https://doi.org/10.1063/1.5047595
Synthesis of YBCO - Y-2411-M (M=Bi, Mo, Nb, Ta, Ti and Zr) superconducting composites by TSMG
AIP Conf. Proc. 1988, 020002 (2018)
https://doi.org/10.1063/1.5047596
Determination of thermal parameters of thin film materials by thermoreflectance profile analysis and multiparameter 3D model fitting
Elie Badine; Mathieu Bardoux; Nadine Abboud; Michael Depriester; Stéphane Longuemart; Ziad Herro; Abdelhak Hadj Sahraoui
AIP Conf. Proc. 1988, 020003 (2018)
https://doi.org/10.1063/1.5047597
Thermal decomposition of lactates: Towards ultrafine nanostrucured oxides
AIP Conf. Proc. 1988, 020004 (2018)
https://doi.org/10.1063/1.5047598
The transient method measurements of thermophysical properties of non-solid clay loam
AIP Conf. Proc. 1988, 020006 (2018)
https://doi.org/10.1063/1.5047600
Physical properties of clay mortars based on insulating aggregates
AIP Conf. Proc. 1988, 020007 (2018)
https://doi.org/10.1063/1.5047601
Alternative method of determination of thermo-physical properties of energetic materials
AIP Conf. Proc. 1988, 020008 (2018)
https://doi.org/10.1063/1.5047602
Glass transition temperature determination of solid rocket propellants using various thermal analysis techniques
AIP Conf. Proc. 1988, 020009 (2018)
https://doi.org/10.1063/1.5047603
Long-time assessment of hygrothermal conditions of the Sedlec charnel house
AIP Conf. Proc. 1988, 020010 (2018)
https://doi.org/10.1063/1.5047604
Experimental investigation of the hygrothermal performance of a new biocomposite material at wall scale
AIP Conf. Proc. 1988, 020012 (2018)
https://doi.org/10.1063/1.5047606
Hygrothermal study of mortar with date palm fiber reinforcement
AIP Conf. Proc. 1988, 020013 (2018)
https://doi.org/10.1063/1.5047607
Methodology of sealing plugs development for brick block with enhanced acoustic properties
AIP Conf. Proc. 1988, 020014 (2018)
https://doi.org/10.1063/1.5047608
Changes of refractory composite’s mechanical properties due to different temperature loadings
AIP Conf. Proc. 1988, 020015 (2018)
https://doi.org/10.1063/1.5047609
Acoustic emission of Estonian clay Arumetsa during firing
Tomáš Húlan; Igor Štubňa; Tiit Kaljuvee; Štefan Csáki; Michal Knapek; Patrik Dobroň; František Chmelík
AIP Conf. Proc. 1988, 020016 (2018)
https://doi.org/10.1063/1.5047610
Heat capacity and thermal stability of YBa2Cu3O7
AIP Conf. Proc. 1988, 020018 (2018)
https://doi.org/10.1063/1.5047612
Measurement and modelling of calcium diffusion in a sandstone
AIP Conf. Proc. 1988, 020019 (2018)
https://doi.org/10.1063/1.5047613
Uncertainty in moisture transport modelling and its effect on ice formation in porous building materials
AIP Conf. Proc. 1988, 020020 (2018)
https://doi.org/10.1063/1.5047614
Computational modelling of thermal processes in a calorimetric experiment
AIP Conf. Proc. 1988, 020021 (2018)
https://doi.org/10.1063/1.5047615
Analysis of gas sensors array signals for evaluation of mold contamination in buildings
AIP Conf. Proc. 1988, 020022 (2018)
https://doi.org/10.1063/1.5047616
Effect of surface moisture on the effectiveness of the hydrophobisation of mortars with pumice aggregate
AIP Conf. Proc. 1988, 020023 (2018)
https://doi.org/10.1063/1.5047617
Fast synthesis of graphite oxide via modified chlorate route
AIP Conf. Proc. 1988, 020025 (2018)
https://doi.org/10.1063/1.5047619
Estimation of the measurement uncertainty of humidity using a TDR probe
AIP Conf. Proc. 1988, 020027 (2018)
https://doi.org/10.1063/1.5047621
The effect of the size on the oscillatory internal circulation for an evaporating methanol-water drop
AIP Conf. Proc. 1988, 020030 (2018)
https://doi.org/10.1063/1.5047624
Influence of zeolite addition on DC conductivity of illitic clay after firing at different temperatures
AIP Conf. Proc. 1988, 020034 (2018)
https://doi.org/10.1063/1.5047628
Thermal, mechanical and structural properties of mortars for rehabilitation of buildings contaminated by chlorides
AIP Conf. Proc. 1988, 020035 (2018)
https://doi.org/10.1063/1.5047629
Thermal properties of lightweight concrete with scrap tire rubber-based aggregate
AIP Conf. Proc. 1988, 020036 (2018)
https://doi.org/10.1063/1.5047630
Thermal properties of high performance fiber reinforced concrete
AIP Conf. Proc. 1988, 020037 (2018)
https://doi.org/10.1063/1.5047631
The use of coagulated silica as active mineral admixture in cement-based fine grained mortars
AIP Conf. Proc. 1988, 020039 (2018)
https://doi.org/10.1063/1.5047633
Experimental investigation on rheology property of MWCNT-Al2O3/water hybrid nanofluid
AIP Conf. Proc. 1988, 020042 (2018)
https://doi.org/10.1063/1.5047636
Comparison of invasive and non-invasive TDR sensors features for moisture evaluation of the building materials
AIP Conf. Proc. 1988, 020044 (2018)
https://doi.org/10.1063/1.5047638
Laboratory determination of hygric and thermal anisotropy of aerated concrete
AIP Conf. Proc. 1988, 020045 (2018)
https://doi.org/10.1063/1.5047639
DSC and TGA of a kaolin-based ceramics with zeolite addition during heating up to 1100 °C
AIP Conf. Proc. 1988, 020046 (2018)
https://doi.org/10.1063/1.5047640
On some non-gradient approaches to inverse and optimization problems of thermal transfer
AIP Conf. Proc. 1988, 020047 (2018)
https://doi.org/10.1063/1.5047641
Numerical modeling of water and heat transport in porous building material
AIP Conf. Proc. 1988, 020048 (2018)
https://doi.org/10.1063/1.5047642
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.