Skip Nav Destination

Issues

Select Decade

Select Year

Issue

Volume 1980, Issue 1

13 July 2018

All Issues

Cover Image

Cover Image

In this Issue

PRELIMINARY
KEYNOTE PAPER
MECHANICS AND MATERIALS ENGINEERING
FLUIDS ENGINEERING
HEAT TRANSFER AND THERMAL ENGINEERING
RELATED MECHANICAL ENGINEERING

PRELIMINARY

Preface: International Conference on Mechanical Engineering

AIP Conf. Proc. 1980, 010001 (2018) https://doi.org/10.1063/1.5044278

View articletitled, Preface: International Conference on Mechanical Engineering

Open the PDF for in another window

KEYNOTE PAPER

Solutions to some important issues in strain gage based determination of stress intensity factors

D. Chakraborty; K. S. R. K. Murthy

AIP Conf. Proc. 1980, 020001 (2018) https://doi.org/10.1063/1.5044279

Abstract

View articletitled, Solutions to some important issues in strain gage based determination of stress intensity factors

Open the PDF for in another window

MECHANICS AND MATERIALS ENGINEERING

Effects of composition and cooling rates (annealing and normalizing) on the microstructure and tensile properties of plain carbon low alloy steels

Abul Hossain; Md. Mohar Ali

AIP Conf. Proc. 1980, 030001 (2018) https://doi.org/10.1063/1.5044280

Abstract

View articletitled, Effects of composition and cooling rates (annealing and normalizing) on the microstructure and tensile properties of plain carbon low alloy steels

Open the PDF for in another window

Effects of heat treatment on the microstructure, impact toughness and fracture strength of Al-6Si-2Cu cast alloy

Abul Hossain; Fahmida Gulshan; A. S. W. Kurny

AIP Conf. Proc. 1980, 030002 (2018) https://doi.org/10.1063/1.5044281

Abstract

View articletitled, Effects of heat treatment on the microstructure, impact toughness and fracture strength of Al-6Si-2Cu cast alloy

Open the PDF for in another window

Evaluation of mechanical properties of de-oiled rice bran reinforced polypropylene composites

Dip Dutta; M. S. Parvej; A. M. Afsar

AIP Conf. Proc. 1980, 030003 (2018) https://doi.org/10.1063/1.5044282

Abstract

View articletitled, Evaluation of mechanical properties of de-oiled rice bran reinforced polypropylene composites

Open the PDF for in another window

Numerical investigation of the state of stresses in bilayer composites under tensile and shear loading conditions

Md Yeasin Bhuiyan; Md. Abdus Salam Akanda

AIP Conf. Proc. 1980, 030004 (2018) https://doi.org/10.1063/1.5044283

Abstract

View articletitled, Numerical investigation of the state of stresses in bilayer composites under tensile and shear loading conditions

Open the PDF for in another window

Structural analysis of a container vessel hatch cover by finite element method

Waliur Rahman; Md. Rauful Islam Sworan; Md. Riad Khan; Md. Sadiqul Baree

AIP Conf. Proc. 1980, 030005 (2018) https://doi.org/10.1063/1.5044284

Abstract

View articletitled, Structural analysis of a container vessel hatch cover by finite element method

Open the PDF for in another window

Design and structural analysis of a pontoon vessel

Raju Kundu; Md Riad Khan; Shadat Rahman; Goutam Kumar Saha

AIP Conf. Proc. 1980, 030006 (2018) https://doi.org/10.1063/1.5044285

Abstract

View articletitled, Design and structural analysis of a pontoon vessel

Open the PDF for in another window

Comparative study of mechanical properties of PP, LDPE and EVA at different molding temperatures

Nandita Chakrabarty Jhumur; Shashwata Chakrabarty; M. A. Gafur; Mohammad Abdul Motalab

AIP Conf. Proc. 1980, 030007 (2018) https://doi.org/10.1063/1.5044286

Abstract

View articletitled, Comparative study of mechanical properties of PP, LDPE and EVA at different molding temperatures

Open the PDF for in another window

Application of ANN and RSM for predicting surface roughness in turning Al based MMC with coated carbide insert

Israt Sharmin; N. R. Dhar

AIP Conf. Proc. 1980, 030008 (2018) https://doi.org/10.1063/1.5044287

Abstract

View articletitled, Application of ANN and RSM for predicting surface roughness in turning Al based MMC with coated carbide insert

Open the PDF for in another window

Finite element analysis of oblique bird strike on leading edge of aircraft wing

Saiaf Bin Rayhan

AIP Conf. Proc. 1980, 030009 (2018) https://doi.org/10.1063/1.5044288

Abstract

View articletitled, Finite element analysis of oblique bird strike on leading edge of aircraft wing

Open the PDF for in another window

Analysis of enhancement of bonding strength in terms of mechanical behavior: Hardness, flexural strength and modulus of Borassus flabellifer (palmyra palm) leaf fiber reinforced polymer matrix composites

Mohammad Tashfiul Amin Chowdhury; Md. Aminul Islam

AIP Conf. Proc. 1980, 030010 (2018) https://doi.org/10.1063/1.5044289

Abstract

View articletitled, Analysis of enhancement of bonding strength in terms of mechanical behavior: Hardness, flexural strength and modulus of Borassus flabellifer (palmyra palm) leaf fiber reinforced polymer matrix composites

Open the PDF for in another window

Numerical investigation of the stress development in the involute spur gear under static load condition

Monjur Mourshed; M. H. Masud; Md. Tariqul Islam

AIP Conf. Proc. 1980, 030011 (2018) https://doi.org/10.1063/1.5044290

Abstract

View articletitled, Numerical investigation of the stress development in the involute spur gear under static load condition

Open the PDF for in another window

Study on the Rietveld analysis for synthesized zinc oxide nanoparticles

Mithun Rani Nath; Aninda Nafis Ahmed; M. A. Gafur; Muhammed Yusuf Miah

AIP Conf. Proc. 1980, 030012 (2018) https://doi.org/10.1063/1.5044291

Abstract

View articletitled, Study on the Rietveld analysis for synthesized zinc oxide nanoparticles

Open the PDF for in another window

Study of precipitation behaviour of hyper-eutectic Al-Si automotive alloy

M. Rahman; S. H. Sabbir; M. S. Kabir; M. S. Kaiser; M. Al Nur

AIP Conf. Proc. 1980, 030013 (2018) https://doi.org/10.1063/1.5044292

Abstract

View articletitled, Study of precipitation behaviour of hyper-eutectic Al-Si automotive alloy

Open the PDF for in another window

Effect of velocity on the corrosion behavior of hyper-eutectic Al-Si automotive alloy in 3.5% NaCl heated solution

S. H. Sabbir; M. Rahman; M. S. Kabir; M. S. Kaiser; M. Al Nur

AIP Conf. Proc. 1980, 030014 (2018) https://doi.org/10.1063/1.5044293

Abstract

View articletitled, Effect of velocity on the corrosion behavior of hyper-eutectic Al-Si automotive alloy in 3.5% NaCl heated solution

Open the PDF for in another window

Temperature and strain rate dependent mechanical properties of ultrathin metallic nanowires: A molecular dynamics study

Md. Ferdous Alam; Muhammad Rubayat Bin Shahadat

AIP Conf. Proc. 1980, 030015 (2018) https://doi.org/10.1063/1.5044294

Abstract

View articletitled, Temperature and strain rate dependent mechanical properties of ultrathin metallic nanowires: A molecular dynamics study

Open the PDF for in another window

Photocatalytic treatment of textile effluent using reduced graphene oxide and zinc oxide integrated nanocomposite with inherent semiconductivity

Nusrat Jahan Salim; Ishrat Zarin; Md. Ashiqur Rahman; M. A. Basith

AIP Conf. Proc. 1980, 030016 (2018) https://doi.org/10.1063/1.5044295

Abstract

View articletitled, Photocatalytic treatment of textile effluent using reduced graphene oxide and zinc oxide integrated nanocomposite with inherent semiconductivity

Open the PDF for in another window

Effect of curing time on the mechanical properties of a veterinarian bone cement

M. Khandaker; M. S. Parvej; K. M. Zaman Kallol; Mohammad Motalab

AIP Conf. Proc. 1980, 030017 (2018) https://doi.org/10.1063/1.5044296

Abstract

View articletitled, Effect of curing time on the mechanical properties of a veterinarian bone cement

Open the PDF for in another window

Single strain gage based determination of mode I stress intensity factor in orthotropic laminates

D. Chakraborty; Debaleena Chakraborty; K. S. R. K. Murthy

AIP Conf. Proc. 1980, 030018 (2018) https://doi.org/10.1063/1.5044297

Abstract

View articletitled, Single strain gage based determination of mode I stress intensity factor in orthotropic laminates

Open the PDF for in another window

Simplified prediction of thermal degradation of jute-polyester textile composites using optical images

F. Fazlullah; M. S. Kaiser; S. Reaz Ahmed

AIP Conf. Proc. 1980, 030019 (2018) https://doi.org/10.1063/1.5044298

Abstract

View articletitled, Simplified prediction of thermal degradation of jute-polyester textile composites using optical images

Open the PDF for in another window

On the characterization of machined surfaces of Perspex samples under different conditions in surface finishing

F. Fazlullah; M. S. Kaiser; S. Reaz Ahmed

AIP Conf. Proc. 1980, 030020 (2018) https://doi.org/10.1063/1.5044299

Abstract

View articletitled, On the characterization of machined surfaces of Perspex samples under different conditions in surface finishing

Open the PDF for in another window

Effect of thermal ageing on mechanical behavior of synthetic and natural rubber dominated short flat bars

M. Muzibur Rahman; Faysal Khan; M. S. Kaiser; S. Reaz Ahmed

AIP Conf. Proc. 1980, 030021 (2018) https://doi.org/10.1063/1.5044300

Abstract

View articletitled, Effect of thermal ageing on mechanical behavior of synthetic and natural rubber dominated short flat bars

Open the PDF for in another window

Investigation on thermal cycling life prediction of PBGA microprocessor components with wavy patterned interface layer

Md. Tanver Hossain; Md. Tusher Ahmed; Mohammad Motalab; Ahmad Shahedi Shakil; Md. Kamruzzaman

AIP Conf. Proc. 1980, 030022 (2018) https://doi.org/10.1063/1.5044301

Abstract

View articletitled, Investigation on thermal cycling life prediction of PBGA microprocessor components with wavy patterned interface layer

Open the PDF for in another window

Temperature and size effect on the mechanical properties of indium phosphide nanowire: An atomistic study

Turash Haque Pial; Tawfiqur Rakib; Pritom Bose; Satyajit Mojumder; Mohammad Motalab

AIP Conf. Proc. 1980, 030023 (2018) https://doi.org/10.1063/1.5044302

Abstract

View articletitled, Temperature and size effect on the mechanical properties of indium phosphide nanowire: An atomistic study

Open the PDF for in another window

Investigation of welding joint for varying current and voltage to minimize the defect using non-destructive testing

Md. Emdadul Hoque; Md. Jabid Hasan; Md. Kamrul Hasan

AIP Conf. Proc. 1980, 030024 (2018) https://doi.org/10.1063/1.5044303

Abstract

View articletitled, Investigation of welding joint for varying current and voltage to minimize the defect using non-destructive testing

Open the PDF for in another window

Shear based analysis of nickel nano-plate by molecular dynamics simulations

Tamanna Akter Jui; Pritom Bose; Tawfiqur Rakib; Satyajit Mojumder; Mohammad Motalab

AIP Conf. Proc. 1980, 030025 (2018) https://doi.org/10.1063/1.5044304

Abstract

View articletitled, Shear based analysis of nickel nano-plate by molecular dynamics simulations

Open the PDF for in another window

A review of additive manufacturing of magnesium alloys

Md Naim Jahangir; Mohammad Arif Hasan Mamun; Michael P. Sealy

AIP Conf. Proc. 1980, 030026 (2018) https://doi.org/10.1063/1.5044305

Abstract

View articletitled, A review of additive manufacturing of magnesium alloys

Open the PDF for in another window

An analysis of stress intensity factor of four equally spaced edge cracks in a functionally graded material cylinder

Avishek Debnath; Roy Jyoti Prokash; Sabuj Chandra Das; A. M. Afsar

AIP Conf. Proc. 1980, 030027 (2018) https://doi.org/10.1063/1.5044306

Abstract

View articletitled, An analysis of stress intensity factor of four equally spaced edge cracks in a functionally graded material cylinder

Open the PDF for in another window

Feasibility study of Bangladeshi electric arc furnace steel slag as an alternative for conventional fine aggregate

Riad Morshed Rezaul; Raihan Atahar; Tahmeed Bin Tasnim; A. S. W. Kurny; Rowshan Momtaz; Fahmida Gulshan

AIP Conf. Proc. 1980, 030028 (2018) https://doi.org/10.1063/1.5044307

Abstract

View articletitled, Feasibility study of Bangladeshi electric arc furnace steel slag as an alternative for conventional fine aggregate

Open the PDF for in another window

Design and development of rice husk reinforced polypropylene composite as an alternate boat building material

Nazmul Haque; Md. Abdul Quader; Abdul Latif; M. Rafiqul Islam

AIP Conf. Proc. 1980, 030029 (2018) https://doi.org/10.1063/1.5044308

Abstract

View articletitled, Design and development of rice husk reinforced polypropylene composite as an alternate boat building material

Open the PDF for in another window

Modeling and simulation of electric field guided cell deformation

Mohammad Robiul Hossan; Adnan Morshed; Robert Dillon; Prashanta Dutta

AIP Conf. Proc. 1980, 030030 (2018) https://doi.org/10.1063/1.5044309

Abstract

View articletitled, Modeling and simulation of electric field guided cell deformation

Open the PDF for in another window

Fabrication and characterization of low density particle boards from pseudo-stem of banana plant

Ashraful Alam Jimmim; Md. Takvir Alam Khan; Md. Ashiqur Rahman

AIP Conf. Proc. 1980, 030031 (2018) https://doi.org/10.1063/1.5044310

Abstract

View articletitled, Fabrication and characterization of low density particle boards from pseudo-stem of banana plant

Open the PDF for in another window

FLUIDS ENGINEERING

Experimental analysis of aerodynamic performances of dragonfly wings

Mohammad Khairul Habib Pulok; Uttam K. Chakravarty

AIP Conf. Proc. 1980, 040001 (2018) https://doi.org/10.1063/1.5044311

Abstract

View articletitled, Experimental analysis of aerodynamic performances of dragonfly wings

Open the PDF for in another window

CFD study of wind effect on staggered cylinders of square cross section with variable longitudinal and transverse spacing

Tanvir Chowdhury; Md Quamrul Islam; Mohammad Ali

AIP Conf. Proc. 1980, 040002 (2018) https://doi.org/10.1063/1.5044312

Abstract

View articletitled, CFD study of wind effect on staggered cylinders of square cross section with variable longitudinal and transverse spacing

Open the PDF for in another window

Wind effect simulation on cylinders of octagonal sections at different locations

Mst Mousumi Rizia; Zawad Abedin; Tanvir Chowdhury; Md Quamrul Islam

AIP Conf. Proc. 1980, 040003 (2018) https://doi.org/10.1063/1.5044313

Abstract

View articletitled, Wind effect simulation on cylinders of octagonal sections at different locations

Open the PDF for in another window

An investigation of a cargo ship hull vibration using full integral method

Taofiq Hasan Mahmood; Aktarojjaman; Kaiser Mahmood; Md. Sadiqul Baree

AIP Conf. Proc. 1980, 040004 (2018) https://doi.org/10.1063/1.5044314

Abstract

View articletitled, An investigation of a cargo ship hull vibration using full integral method

Open the PDF for in another window

Stability of injected flow through a porous tube with magnetic field

M. Mainul Hossain

AIP Conf. Proc. 1980, 040005 (2018) https://doi.org/10.1063/1.5044315

Abstract

View articletitled, Stability of injected flow through a porous tube with magnetic field

Open the PDF for in another window

Computation of resistance of high speed planing craft using Savitsky’s theory

Md. Shahjada Tarafder; Asadur Rahman Saaki

AIP Conf. Proc. 1980, 040006 (2018) https://doi.org/10.1063/1.5044316

Abstract

View articletitled, Computation of resistance of high speed planing craft using Savitsky’s theory

Open the PDF for in another window

Finite element analysis of aerodynamic coefficients of a HAWT blade using LBM method

Akib Khan

AIP Conf. Proc. 1980, 040007 (2018) https://doi.org/10.1063/1.5044317

Abstract

View articletitled, Finite element analysis of aerodynamic coefficients of a HAWT blade using LBM method

Open the PDF for in another window

Effect of flow confinement on the hydrodynamics and heat transfer characteristics of swirling impinging jets

Zahir U. Ahmed; Md. Habib U. Khan; Roger E. Khayat; Sumaiya Tasnim

AIP Conf. Proc. 1980, 040008 (2018) https://doi.org/10.1063/1.5044318

Abstract

View articletitled, Effect of flow confinement on the hydrodynamics and heat transfer characteristics of swirling impinging jets

Open the PDF for in another window

Large eddy simulation of shock train phenomena in a gas dynamic flow passage

Md. Saddam Hossain Joy; A. B. M. Toufique Hasan

AIP Conf. Proc. 1980, 040009 (2018) https://doi.org/10.1063/1.5044319

Abstract

View articletitled, Large eddy simulation of shock train phenomena in a gas dynamic flow passage

Open the PDF for in another window

Resistance prediction of an armored personnel carrier

Md. Taufiqul Islam; Anika Zia; Md. Ahsanur Rahman; Md. Mashiur Rahaman; Md. Reaz Hasan Khondoker

AIP Conf. Proc. 1980, 040010 (2018) https://doi.org/10.1063/1.5044320

Abstract

View articletitled, Resistance prediction of an armored personnel carrier

Open the PDF for in another window

Numerical investigation of drag reduction using moving surface boundary layer control (MSBC) on NACA 0012 airfoil

Md. Iftha Khar; Kawkab Ahasan; Mohammad Ali

AIP Conf. Proc. 1980, 040011 (2018) https://doi.org/10.1063/1.5044321

Abstract

View articletitled, Numerical investigation of drag reduction using moving surface boundary layer control (MSBC) on NACA 0012 airfoil

Open the PDF for in another window

Performance analysis of a viscous micropump with dual rotating cylinders

Md. Nur Alam Mondal; A. B. M. Toufique Hasan

AIP Conf. Proc. 1980, 040012 (2018) https://doi.org/10.1063/1.5044322

Abstract

View articletitled, Performance analysis of a viscous micropump with dual rotating cylinders

Open the PDF for in another window

Control of shock/boundary-layer interactions in a supersonic inlet isolator using geometric modification

Md. Raihan Ali Khan; Shadman Tahmid; A. B. M. Toufique Hasan

AIP Conf. Proc. 1980, 040013 (2018) https://doi.org/10.1063/1.5044323

Abstract

View articletitled, Control of shock/boundary-layer interactions in a supersonic inlet isolator using geometric modification

Open the PDF for in another window

An analysis of thrust vectoring in a supersonic nozzle using bypass mass injection

Md. Shafiqul Islam; Md. Arafat Hasan; A. B. M. Toufique Hasan

AIP Conf. Proc. 1980, 040014 (2018) https://doi.org/10.1063/1.5044324

Abstract

View articletitled, An analysis of thrust vectoring in a supersonic nozzle using bypass mass injection

Open the PDF for in another window

The effect of Reynolds number on the performance of a modified NACA 2412 airfoil

Md. Tariqul Islam; Amit M. E. Arefin; M. H. Masud; Monjur Mourshed

AIP Conf. Proc. 1980, 040015 (2018) https://doi.org/10.1063/1.5044325

Abstract

View articletitled, The effect of Reynolds number on the performance of a modified NACA 2412 airfoil

Open the PDF for in another window

Computational study of airfoil performance with the incorporation of a moving surface at the leading edge

Nafiz Ahmed Khan; Md. Abdus Salam; Kh. Md. Faisal; Debanan Bhadra

AIP Conf. Proc. 1980, 040016 (2018) https://doi.org/10.1063/1.5044326

Abstract

View articletitled, Computational study of airfoil performance with the incorporation of a moving surface at the leading edge

Open the PDF for in another window

Comparative study of Newtonian and Non-Newtonian blood flow through a stenosed carotid artery

Mohammad Matiur Rahman; Md. Anwar Hossain; Khairuzzaman Mamun; Most. Nasrin Akhter

AIP Conf. Proc. 1980, 040017 (2018) https://doi.org/10.1063/1.5044327

Abstract

View articletitled, Comparative study of Newtonian and Non-Newtonian blood flow through a stenosed carotid artery

Open the PDF for in another window

Numerical investigation of flow around cavitating hydrofoil using finite volume method

Md. Mashud Karim; Mahmudur Rahman; Md. Abdul Hai; Md. Masuduzzaman Shimul; Saif Hossain Sudhi

AIP Conf. Proc. 1980, 040018 (2018) https://doi.org/10.1063/1.5044328

Abstract

View articletitled, Numerical investigation of flow around cavitating hydrofoil using finite volume method

Open the PDF for in another window

Mathematical study of thrombogenic potentiality of an implant surface

Israt Jahan Duti; Syed Hossainy; Nafisa Islam

AIP Conf. Proc. 1980, 040019 (2018) https://doi.org/10.1063/1.5044329

Abstract

View articletitled, Mathematical study of thrombogenic potentiality of an implant surface

Open the PDF for in another window

Numerical investigation of gurney flap aerodynamics over a NACA 2412 airfoil

Sanjoy Kumar Saha; Md. Mahbubul Alam; A. B. M. Toufique Hasan

AIP Conf. Proc. 1980, 040020 (2018) https://doi.org/10.1063/1.5044330

Abstract

View articletitled, Numerical investigation of gurney flap aerodynamics over a NACA 2412 airfoil

Open the PDF for in another window

Estimation of linear hydrodynamic derivatives of a VLCC using static drift simulation

Hafizul Islam; Md. Mashiur Rahaman; Laboni Afroz; Hiromichi Akimoto

AIP Conf. Proc. 1980, 040021 (2018) https://doi.org/10.1063/1.5044331

Abstract

View articletitled, Estimation of linear hydrodynamic derivatives of a VLCC using static drift simulation

Open the PDF for in another window

Numerical simulation of Bingham fluid flows in a lid-driven skewed cavity

Sharaban Thohura; Md. Mamun Molla; M. M. A. Sarker

AIP Conf. Proc. 1980, 040022 (2018) https://doi.org/10.1063/1.5044332

Abstract

View articletitled, Numerical simulation of Bingham fluid flows in a lid-driven skewed cavity

Open the PDF for in another window

Lattice Boltzmann simulation of Non-Newtonian power-law fluid flows in a bifurcated channel

Md. Noor-A.-Alam Siddiki; Md. Mamun Molla; Sharaban Thohura; Suvash C. Saha

AIP Conf. Proc. 1980, 040023 (2018) https://doi.org/10.1063/1.5044333

Abstract

View articletitled, Lattice Boltzmann simulation of Non-Newtonian power-law fluid flows in a bifurcated channel

Open the PDF for in another window

A Mach-number-gradient-based shock switch for accurate computation of inviscid compressible flows

Paragmoni Kalita; Anoop Kumar Dass

AIP Conf. Proc. 1980, 040024 (2018) https://doi.org/10.1063/1.5044334

Abstract

View articletitled, A Mach-number-gradient-based shock switch for accurate computation of inviscid compressible flows

Open the PDF for in another window

A comprehensive study on multiphase flow through annular pipe using CFD approach

Alamgir Hossain; Rasel A. Sultan; Raian Nur Islam; Satya Brata Das; Sharodia Majumder; Mohammad Azizur Rahman; Sohrab Zendehboudi

AIP Conf. Proc. 1980, 040025 (2018) https://doi.org/10.1063/1.5044335

Abstract

View articletitled, A comprehensive study on multiphase flow through annular pipe using CFD approach

Open the PDF for in another window

Numerical study of turbulent round free jet

Niloy Das; S. M. Rakibul Islam; Sayeed Mohammed; Mohammad Nasim Hasan

AIP Conf. Proc. 1980, 040026 (2018) https://doi.org/10.1063/1.5044336

Abstract

View articletitled, Numerical study of turbulent round free jet

Open the PDF for in another window

HEAT TRANSFER AND THERMAL ENGINEERING

Naturally convective and thermally radiative heat and mass transfer of dilatant nanofluid flow through a vertical porous plate

Raju Roy; S. M. Arifuzzaman; B. Roy; Ariful Islam; S. F. Ahmmed

AIP Conf. Proc. 1980, 050001 (2018) https://doi.org/10.1063/1.5044337

Abstract

View articletitled, Naturally convective and thermally radiative heat and mass transfer of dilatant nanofluid flow through a vertical porous plate

Open the PDF for in another window

A simulation study of bio-heat transfer in human skin under different burning conditions

Abul Mukid Mohammad Mukaddes; Md. Rezwan Jaher; Dipon Roy; Ryuji Shioya

AIP Conf. Proc. 1980, 050002 (2018) https://doi.org/10.1063/1.5044338

Abstract

View articletitled, A simulation study of bio-heat transfer in human skin under different burning conditions

Open the PDF for in another window

Forced convective Jeffrey nanofluid flow over a stretching sheet with periodic magnetic field and thermal radiation effects

P. Biswas; S. M. Arifuzzaman; M. S. Khan; S. F. Ahmmed

AIP Conf. Proc. 1980, 050003 (2018) https://doi.org/10.1063/1.5044339

Abstract

View articletitled, Forced convective Jeffrey nanofluid flow over a stretching sheet with periodic magnetic field and thermal radiation effects

Open the PDF for in another window

Mixed convection of CuO-water nanofluid in a square enclosure with an intruded rectangular fin

Wendi Zhao; Aloke K. Mozumder; Prodip K. Das

AIP Conf. Proc. 1980, 050004 (2018) https://doi.org/10.1063/1.5044340

Abstract

View articletitled, Mixed convection of CuO-water nanofluid in a square enclosure with an intruded rectangular fin

Open the PDF for in another window

Heat transfer and entropy generation of mixed convection in nanofluid inside a rough cavity

Kevin Ting; Aloke K. Mozumder; Prodip K. Das

AIP Conf. Proc. 1980, 050005 (2018) https://doi.org/10.1063/1.5044341

Abstract

View articletitled, Heat transfer and entropy generation of mixed convection in nanofluid inside a rough cavity

Open the PDF for in another window

CFD analysis of shell and tube heat exchanger with different baffle orientation and baffle cut

Noor Afsar; Mohammad Ilias Inam

AIP Conf. Proc. 1980, 050006 (2018) https://doi.org/10.1063/1.5044342

Abstract

View articletitled, CFD analysis of shell and tube heat exchanger with different baffle orientation and baffle cut

Open the PDF for in another window

A numerical investigation of heat transfer enhancement techniques in mini-channel heat sink

Golam Rasul; Md. Kamaruddin Elias; A. K. M. Monjur Morshed

AIP Conf. Proc. 1980, 050007 (2018) https://doi.org/10.1063/1.5044343

Abstract

View articletitled, A numerical investigation of heat transfer enhancement techniques in mini-channel heat sink

Open the PDF for in another window

A molecular dynamics study of thermal transportation of graphene sheet with various temperature

Muhammad Rubayat Bin Shahadat; A. K. M. M. Morshed

AIP Conf. Proc. 1980, 050008 (2018) https://doi.org/10.1063/1.5044344

Abstract

View articletitled, A molecular dynamics study of thermal transportation of graphene sheet with various temperature

Open the PDF for in another window

Magnetohydrodynamic mixed convection in a double lid driven porous square enclosure filled with copper-water nanofluid with heat generating elliptic block

M. Jahirul Haque Munshi; M. A. Alim; Raju Chowdhury

AIP Conf. Proc. 1980, 050009 (2018) https://doi.org/10.1063/1.5044345

Abstract

View articletitled, Magnetohydrodynamic mixed convection in a double lid driven porous square enclosure filled with copper-water nanofluid with heat generating elliptic block

Open the PDF for in another window

A molecular dynamics simulation study on condensation of R600a refrigerant

Md. Sarwar Alam; Ji Hwan Jeong

AIP Conf. Proc. 1980, 050010 (2018) https://doi.org/10.1063/1.5044346

Abstract

View articletitled, A molecular dynamics simulation study on condensation of R600a refrigerant

Open the PDF for in another window

Numerical simulation of residential building on the basis of natural ventilation

Arnab Mustafi Arka; Md. Tofazzal Hossain; A. K. M. M. Morshed

AIP Conf. Proc. 1980, 050011 (2018) https://doi.org/10.1063/1.5044347

Abstract

View articletitled, Numerical simulation of residential building on the basis of natural ventilation

Open the PDF for in another window

Influence of helix angle on the performance of shell-and-tube heat exchanger with continuous helical baffle

Anuruddha Bhattacharjee; Asif Ahmed; Sumon Saha

AIP Conf. Proc. 1980, 050012 (2018) https://doi.org/10.1063/1.5044348

Abstract

View articletitled, Influence of helix angle on the performance of shell-and-tube heat exchanger with continuous helical baffle

Open the PDF for in another window

Effect of Hartmann number on magneto-convection in a lid driven square cavity with wavy side wall

Md. Shahidul Alam; Md. Shirazul Hoque Mollah; Md. Abdul Alim; Md Nasir Uddin

AIP Conf. Proc. 1980, 050013 (2018) https://doi.org/10.1063/1.5044349

Abstract

View articletitled, Effect of Hartmann number on magneto-convection in a lid driven square cavity with wavy side wall

Open the PDF for in another window

Combined heat and mass transfer of unsteady fluid flow analysis through vertical porous medium in presence of nanoparticles

Khan Enaet Hossain; Md. Zohurul Islam; Raju Roy; S. M. Arifuzzaman

AIP Conf. Proc. 1980, 050014 (2018) https://doi.org/10.1063/1.5044350

Abstract

View articletitled, Combined heat and mass transfer of unsteady fluid flow analysis through vertical porous medium in presence of nanoparticles

Open the PDF for in another window

Nanoparticles-loaded fluids for cooling modern electronics

S. M. Sohel Murshed; C. A. Nieto de Castro

AIP Conf. Proc. 1980, 050015 (2018) https://doi.org/10.1063/1.5044351

Abstract

View articletitled, Nanoparticles-loaded fluids for cooling modern electronics

Open the PDF for in another window

Experimental study of solidification and melting characteristics of thermal energy storage (TES) system

Md. Abdul Aziz; Hasan M. M. Afroz; Shaon Talukder; Md. Anowar Hossain

AIP Conf. Proc. 1980, 050016 (2018) https://doi.org/10.1063/1.5044352

Abstract

View articletitled, Experimental study of solidification and melting characteristics of thermal energy storage (TES) system

Open the PDF for in another window

Effects of Rayleigh number and wall conductivity on conjugate natural convection of nanofluid in a heat conducting rectangular vertical walled enclosure

Ishrat Zahan; M. A. Alim

AIP Conf. Proc. 1980, 050017 (2018) https://doi.org/10.1063/1.5044353

Abstract

View articletitled, Effects of Rayleigh number and wall conductivity on conjugate natural convection of nanofluid in a heat conducting rectangular vertical walled enclosure

Open the PDF for in another window

Relation between the thermal conductivity and grain size in a polycrystalline silicene sheet

Arghya Kamol Roy; Shuvendu Das; Md. Fahim Shahriar; Goutam Kumar Biswas; Sourav Das

AIP Conf. Proc. 1980, 050018 (2018) https://doi.org/10.1063/1.5044354

Abstract

View articletitled, Relation between the thermal conductivity and grain size in a polycrystalline silicene sheet

Open the PDF for in another window

Effect of Coriolis force on unsteady flow with convective heat transfer through a curved duct in case of negative rotation

Md. Zohurul Islam; Md. Harun Rashid; Rabindra Nath Mondal

AIP Conf. Proc. 1980, 050019 (2018) https://doi.org/10.1063/1.5044355

Abstract

View articletitled, Effect of Coriolis force on unsteady flow with convective heat transfer through a curved duct in case of negative rotation

Open the PDF for in another window

Effect of magnetic field on double diffusive natural convection flow in a closed chamber using nanofluid

Mohammad Mokaddes Ali; M. A. Alim; R. Nasrin

AIP Conf. Proc. 1980, 050020 (2018) https://doi.org/10.1063/1.5044356

Abstract

View articletitled, Effect of magnetic field on double diffusive natural convection flow in a closed chamber using nanofluid

Open the PDF for in another window

Extraction of biodiesel from feather meal and its characterization and performance test on diesel engine

Tirtho Sarathi Saha; Md. Shakil Shaikh; Shaikh Sumit Noor

AIP Conf. Proc. 1980, 050021 (2018) https://doi.org/10.1063/1.5044357

Abstract

View articletitled, Extraction of biodiesel from feather meal and its characterization and performance test on diesel engine

Open the PDF for in another window

Mathematical modeling of the thermofluid characteristics of solar collector for variable solar radiation in climatic condition of Bangladesh

Md. Anowar Hossain; K. M. Ariful Kabir; M. M. A. Sarker

AIP Conf. Proc. 1980, 050022 (2018) https://doi.org/10.1063/1.5044358

Abstract

View articletitled, Mathematical modeling of the thermofluid characteristics of solar collector for variable solar radiation in climatic condition of Bangladesh

Open the PDF for in another window

Effect of vacancy defects on thermal conductivity of silicon nanowire: A molecular dynamics study

Asma Ul Hosna Meem; Ongira Chowdhury; A. K. M. M. Morshed

AIP Conf. Proc. 1980, 050023 (2018) https://doi.org/10.1063/1.5044359

Abstract

View articletitled, Effect of vacancy defects on thermal conductivity of silicon nanowire: A molecular dynamics study

Open the PDF for in another window

Atomistic simulation of temperature dependent heat capacity of nanogap confined liquid

Rifat Mahmud; A. K. M. Monjur Morshed

AIP Conf. Proc. 1980, 050024 (2018) https://doi.org/10.1063/1.5044360

Abstract

View articletitled, Atomistic simulation of temperature dependent heat capacity of nanogap confined liquid

Open the PDF for in another window

Effect of heat conducting thick wall on pure mixed convection in a lid-driven trapezoidal cavity filled with water-Al₂O₃ nanofluid

Dibakar Das; Sonkolon Barua; Sumon Saha

AIP Conf. Proc. 1980, 050025 (2018) https://doi.org/10.1063/1.5044361

Abstract

View articletitled, Effect of heat conducting thick wall on pure mixed convection in a lid-driven trapezoidal cavity filled with water-Al2O3 nanofluid

Open the PDF for in another window

Numerical simulation of fire in a multistoried ready-made garments factory using PyroSim

Md. Arifur Rahman Khandoker; Rownak Jahan Mou; Md. Ali Muntaha; Md. Ashiqur Rahman

AIP Conf. Proc. 1980, 050026 (2018) https://doi.org/10.1063/1.5044362

Abstract

View articletitled, Numerical simulation of fire in a multistoried ready-made garments factory using PyroSim

Open the PDF for in another window

Numerical study of heat transfer enhancement in an inclined rectangular channel with multiple discrete heaters through active flow modulation

Clinton Chowdhury; Kawser Ahmed Jewel; Sumon Saha; Mohammad Nasim Hasan

AIP Conf. Proc. 1980, 050027 (2018) https://doi.org/10.1063/1.5044363

Abstract

View articletitled, Numerical study of heat transfer enhancement in an inclined rectangular channel with multiple discrete heaters through active flow modulation

Open the PDF for in another window

Nano-scale transport characteristics during thin film evaporation: Effect of liquid film thickness

Chandni Akhter; Renoa Choudhury; Fatama Tahsin Huda; Mohammad Nasim Hasan

AIP Conf. Proc. 1980, 050028 (2018) https://doi.org/10.1063/1.5044364

Abstract

View articletitled, Nano-scale transport characteristics during thin film evaporation: Effect of liquid film thickness

Open the PDF for in another window

Numerical simulation of turbulent mixed convective pipe flow

Sayeed Mohammed; Anuruddha Bhattacharjee; Sumon Saha

AIP Conf. Proc. 1980, 050029 (2018) https://doi.org/10.1063/1.5044365

Abstract

View articletitled, Numerical simulation of turbulent mixed convective pipe flow

Open the PDF for in another window

Numerical study of 2D axisymmetric wavy-walled turbulent pipe flow and heat transfer with Al₂O₃-water nanofluid

Samanta Saha; Anwarul Islam Akash; Ahsan-Ul Hossain Abir; Sabir Subedi; Sumon Saha

AIP Conf. Proc. 1980, 050030 (2018) https://doi.org/10.1063/1.5044366

Abstract

View articletitled, Numerical study of 2D axisymmetric wavy-walled turbulent pipe flow and heat transfer with Al2O3-water nanofluid

Open the PDF for in another window

Increasing film cooling effectiveness of a gas turbine blade by using an upstream ramp

Md Rysul Kabir; Md. Salman Rabbi Limon; Sumon Saha; Mohammad Nasim Hasan

AIP Conf. Proc. 1980, 050031 (2018) https://doi.org/10.1063/1.5044367

Abstract

View articletitled, Increasing film cooling effectiveness of a gas turbine blade by using an upstream ramp

Open the PDF for in another window

Numerical study of turbulent flow over two side-by-side rotating cylinders

Md. Ibrahim Khalil; Shoaib Anwar; Sumon Saha; Md. Quamrul Islam

AIP Conf. Proc. 1980, 050032 (2018) https://doi.org/10.1063/1.5044368

Abstract

View articletitled, Numerical study of turbulent flow over two side-by-side rotating cylinders

Open the PDF for in another window

RELATED MECHANICAL ENGINEERING

Efficiency study: Contra-rotating propeller system

Md Riad Khan; Raju Kundu; Waliur Rahman; Md Mobinul Haque; Md Refayeth Ullah

AIP Conf. Proc. 1980, 060001 (2018) https://doi.org/10.1063/1.5044369

Abstract

View articletitled, Efficiency study: Contra-rotating propeller system

Open the PDF for in another window

Design and development of SQL system in sustainability issues of machining

S. R. Shahriar; Afsana Nasir; N. R. Dhar

AIP Conf. Proc. 1980, 060002 (2018) https://doi.org/10.1063/1.5044370

Abstract

View articletitled, Design and development of SQL system in sustainability issues of machining

Open the PDF for in another window

Investigation on pyrolysis of coconut shell for bio-oil production using infrared heat source

Md. Sharif Ahmed Sarker; Mehedi Hasan Tusar; Bodius Salam; Khandaker Golam Morshed Prince

AIP Conf. Proc. 1980, 060003 (2018) https://doi.org/10.1063/1.5044371

Abstract

View articletitled, Investigation on pyrolysis of coconut shell for bio-oil production using infrared heat source

Open the PDF for in another window

Photocatalytic properties of Ti-doped BiFeO₃ bulk and nanoparticles for solar hydrogen fuel generation

Nafiza Anjum; Syeda Noor E. Lamia; Md. Yeashir Arafat; Monon Mahboob; M. A. Basith

AIP Conf. Proc. 1980, 060004 (2018) https://doi.org/10.1063/1.5044372

Abstract

View articletitled, Photocatalytic properties of Ti-doped BiFeO3 bulk and nanoparticles for solar hydrogen fuel generation

Open the PDF for in another window

Comparison of different control theories on a two wheeled self balancing robot

M. D. Muhaimin Rahman; S. M. Hasanur Rashid; K. M. Rafidh Hassan; M. M. Hossain

AIP Conf. Proc. 1980, 060005 (2018) https://doi.org/10.1063/1.5044373

Abstract

View articletitled, Comparison of different control theories on a two wheeled self balancing robot

Open the PDF for in another window

Numerical investigation of the stability and power prediction of a sail based wind propulsion system for a cargo ship

Md. Daluar Hussain; Md. Shahnewaz Tuhin; Shahariar Kabir; Osman Md Amin

AIP Conf. Proc. 1980, 060006 (2018) https://doi.org/10.1063/1.5044374

Abstract

View articletitled, Numerical investigation of the stability and power prediction of a sail based wind propulsion system for a cargo ship

Open the PDF for in another window

Thermal conductivity analysis of single-walled carbon nanotube using finite element modeling

Md. Prince Hossain; Koushik Paul

AIP Conf. Proc. 1980, 060007 (2018) https://doi.org/10.1063/1.5044375

Abstract

View articletitled, Thermal conductivity analysis of single-walled carbon nanotube using finite element modeling

Open the PDF for in another window

Designing a solar microgrid system for powering an off-grid fish hatchery and nearby households in Bangladesh

Md. Sayeed Ur Rahim Mahadi; Riasat Alam; David Fernández

AIP Conf. Proc. 1980, 060008 (2018) https://doi.org/10.1063/1.5044376

Abstract

View articletitled, Designing a solar microgrid system for powering an off-grid fish hatchery and nearby households in Bangladesh

Open the PDF for in another window

Optimization of biodiesel production process from varying feedstocks

Shamima Zaman; Saniya Yesmin Bubli; Shoeb Ahmed

AIP Conf. Proc. 1980, 060009 (2018) https://doi.org/10.1063/1.5044377

Abstract

View articletitled, Optimization of biodiesel production process from varying feedstocks

Open the PDF for in another window

An integrated performance based solution approach for commercial buildings energy modeling and energy savings: Case study of a retail building in Bangladesh

M. Mahmudul Hasan; Mohammad Nasim Hasan

AIP Conf. Proc. 1980, 060010 (2018) https://doi.org/10.1063/1.5044378

Abstract

View articletitled, An integrated performance based solution approach for commercial buildings energy modeling and energy savings: Case study of a retail building in Bangladesh

Open the PDF for in another window

Sign up for alerts

RSS

Current Issue RSS Feed

Open Issues RSS Feed

Most Read
Most Cited

Design of a 100 MW solar power plant on wetland in Bangladesh

Apu Kowsar, Sumon Chandra Debnath, et al.

Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts

Zohreh Kiaee, Andreas Lösel, et al.

Production and characterization of corncob biochar for agricultural use

Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.

Issues

Cover Image

PRELIMINARY

KEYNOTE PAPER

MECHANICS AND MATERIALS ENGINEERING

FLUIDS ENGINEERING

HEAT TRANSFER AND THERMAL ENGINEERING

RELATED MECHANICAL ENGINEERING

RSS

Resources

Explore

pubs.aip.org

Connect with AIP Publishing

This Feature Is Available To Subscribers Only