Skip to Main Content
Umbrella Alt Text
header search
Search
Advanced Search |Citation Search
Skip Nav Destination

Issues

Volume 1960, Issue 1
2 May 2018
Issue Cover
All Issues

PRELIMINARY

Preface: 21st International ESAFORM Conference on Material Forming (ESAFORM 2018)
AIP Conf. Proc. 1960, 010001 (2018) https://doi.org/10.1063/1.5034801
View articletitled, Preface: 21st International ESAFORM Conference on Material Forming (ESAFORM 2018)
Open the PDF for in another window

MS1 COMPOSITES FORMING PROCESSES

Experimental investigation of effects of stitching orientation on forming behaviors of 2D P-aramid multilayer woven preform
Mulat Alubel Abtew; François Boussu; Pascal Bruniaux; Carmen Loghin; Irina Cristian; Yan Chen; Lichuan Wang
AIP Conf. Proc. 1960, 020001 (2018) https://doi.org/10.1063/1.5034802
View articletitled, Experimental investigation of effects of stitching orientation on forming behaviors of 2D P-aramid multilayer woven preform
Open the PDF for in another window
Thermo-hydroforming of a fiber-reinforced thermoplastic composites considering fiber orientations
Hyunchul Ahn; Nicholas Eric Kuuttila; Farhang Pourboghrat
AIP Conf. Proc. 1960, 020002 (2018) https://doi.org/10.1063/1.5034803
View articletitled, Thermo-hydroforming of a fiber-reinforced thermoplastic composites considering fiber orientations
Open the PDF for in another window
Microwave heating for thermoplastic composites - Could the technology be used for welding applications?
Anaïs Barasinski; Hermine Tertrais; Stéphane Bechtel; Francisco Chinesta
AIP Conf. Proc. 1960, 020003 (2018) https://doi.org/10.1063/1.5034804
View articletitled, Microwave heating for thermoplastic composites - Could the technology be used for welding applications?
Open the PDF for in another window
On the inter-stitch interaction in biaxial non-crimp fabrics
David Colin; Sylvain Bel; Thorsten Hans; Mathias Hartmann
AIP Conf. Proc. 1960, 020004 (2018) https://doi.org/10.1063/1.5034805
View articletitled, On the inter-stitch interaction in biaxial non-crimp fabrics
Open the PDF for in another window
Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes
Dominik Dörr; Markus Faisst; Tobias Joppich; Christian Poppe; Frank Henning; Luise Kärger
AIP Conf. Proc. 1960, 020005 (2018) https://doi.org/10.1063/1.5034806
View articletitled, Modelling approach for anisotropic inter-ply slippage in finite element forming simulation of thermoplastic UD-tapes
Open the PDF for in another window
Numerical evaluation of a single ellipsoid motion in Newtonian and power-law fluids
Julien Férec; Gilles Ausias; Giovanniantonio Natale
AIP Conf. Proc. 1960, 020006 (2018) https://doi.org/10.1063/1.5034807
View articletitled, Numerical evaluation of a single ellipsoid motion in Newtonian and power-law fluids
Open the PDF for in another window
A novel textile characterisation approach using an embedded sensor system and segmented textile manipulation
Julian Fial; Stefan Carosella; Mario Langheinz; Patrick Wiest; Peter Middendorf
AIP Conf. Proc. 1960, 020007 (2018) https://doi.org/10.1063/1.5034808
View articletitled, A novel textile characterisation approach using an embedded sensor system and segmented textile manipulation
Open the PDF for in another window
Irreversibility during forming process of woven reinforcements
Tarek Abdul Ghafour; Julien Colmars; Philippe Boisse
AIP Conf. Proc. 1960, 020008 (2018) https://doi.org/10.1063/1.5034809
View articletitled, Irreversibility during forming process of woven reinforcements
Open the PDF for in another window
Prediction of wrinklings and porosities of thermoplastic composits after thermostamping
Nahiene Hamila; Eduardo Guzman-Maldonado; Hu Xiong; Peng Wang; Philippe Boisse; Jerome Bikard
AIP Conf. Proc. 1960, 020009 (2018) https://doi.org/10.1063/1.5034810
View articletitled, Prediction of wrinklings and porosities of thermoplastic composits after thermostamping
Open the PDF for in another window
The effect of processing on the mechanical properties of self-reinforced composites
Farzaneh Hassani; Peter J. Martin; Brian G. Falzon
AIP Conf. Proc. 1960, 020010 (2018) https://doi.org/10.1063/1.5034811
View articletitled, The effect of processing on the mechanical properties of self-reinforced composites
Open the PDF for in another window
An experimental investigation on the thermal field of overlapping layers in laser-assisted tape winding process
S. M. A. Hosseini; I. Baran; R. Akkerman
AIP Conf. Proc. 1960, 020011 (2018) https://doi.org/10.1063/1.5034812
View articletitled, An experimental investigation on the thermal field of overlapping layers in laser-assisted tape winding process
Open the PDF for in another window
Meso-macro simulation of the woven fabric local deformation in draping
Akira Iwata; Takuya Inoue; Naim Naouar; Philippe Boisse; Stepan V. Lomov
AIP Conf. Proc. 1960, 020012 (2018) https://doi.org/10.1063/1.5034813
View articletitled, Meso-macro simulation of the woven fabric local deformation in draping
Open the PDF for in another window
Simulation chain for composite part curing with an industrial micro-wave oven
Yann Duplessis Kergomard; Erik Abenius; Hermine Tertrais; Anaïs Barasinski; Francisco Chinesta; Laurent Dufort
AIP Conf. Proc. 1960, 020013 (2018) https://doi.org/10.1063/1.5034814
View articletitled, Simulation chain for composite part curing with an industrial micro-wave oven
Open the PDF for in another window
Characterising the thermoforming behaviour of glass fibre textile reinforced thermoplastic composite materials
M. Kuhtz; B. Maron; A. Hornig; M. Müller; A. Langkamp; M. Gude
AIP Conf. Proc. 1960, 020014 (2018) https://doi.org/10.1063/1.5034815
View articletitled, Characterising the thermoforming behaviour of glass fibre textile reinforced thermoplastic composite materials
Open the PDF for in another window
A shell approach for fibrous reinforcement forming simulations
B. Liang; J. Colmars; P. Boisse
AIP Conf. Proc. 1960, 020015 (2018) https://doi.org/10.1063/1.5034816
View articletitled, A shell approach for fibrous reinforcement forming simulations
Open the PDF for in another window
Prediction of composites behavior undergoing an ATP process through data-mining
Clara Argerich Martin; Angel Leon Collado; Rubén Ibañez Pinillo; Anaïs Barasinski; Emmanuelle Abisset-Chavanne; Francisco Chinesta
AIP Conf. Proc. 1960, 020016 (2018) https://doi.org/10.1063/1.5034817
View articletitled, Prediction of composites behavior undergoing an ATP process through data-mining
Open the PDF for in another window
Failure prediction for the optimization of stretch forming aluminium-polymer laminate foils used for pharmaceutical packaging
Simon Müller; Sabine M. Weygand
AIP Conf. Proc. 1960, 020017 (2018) https://doi.org/10.1063/1.5034818
View articletitled, Failure prediction for the optimization of stretch forming aluminium-polymer laminate foils used for pharmaceutical packaging
Open the PDF for in another window
Behavior of fiber reinforced metal laminates at high strain rate
Golam Newaz; Marco Sasso; Dario Amodio; Edoardo Mancini
AIP Conf. Proc. 1960, 020018 (2018) https://doi.org/10.1063/1.5034819
View articletitled, Behavior of fiber reinforced metal laminates at high strain rate
Open the PDF for in another window
RTM simulations and experiments for fiber-reinforced turbine blades forming
Tuan Linh Nguyen; Christophe Marchand
AIP Conf. Proc. 1960, 020019 (2018) https://doi.org/10.1063/1.5034820
View articletitled, RTM simulations and experiments for fiber-reinforced turbine blades forming
Open the PDF for in another window
Impact behavior of basalt/epoxy composite: Comparison between flat and twill fabric
I. Papa; M. R. Ricciardi; V. Antonucci; A. Langella; V. Lopresto
AIP Conf. Proc. 1960, 020020 (2018) https://doi.org/10.1063/1.5034821
View articletitled, Impact behavior of basalt/epoxy composite: Comparison between flat and twill fabric
Open the PDF for in another window
Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part
J. Patou; E. De Luycker; R. Bonnaire; T. Cutard; G. Bernhart
AIP Conf. Proc. 1960, 020021 (2018) https://doi.org/10.1063/1.5034822
View articletitled, Influence of the forming process on the mechanical behavior of a commingled carbon PPS composite part
Open the PDF for in another window
A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding
Christian Poppe; Dominik Dörr; Frank Henning; Luise Kärger
AIP Conf. Proc. 1960, 020022 (2018) https://doi.org/10.1063/1.5034823
View articletitled, A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding
Open the PDF for in another window
Bias extension test on a bi-axial non-crimp fabric powdered with a non-reactive binder system
Jean Pourtier; Boris Duchamp; Maxime Kowalski; Xavier Legrand; Peng Wang; Damien Soulat
AIP Conf. Proc. 1960, 020023 (2018) https://doi.org/10.1063/1.5034824
View articletitled, Bias extension test on a bi-axial non-crimp fabric powdered with a non-reactive binder system
Open the PDF for in another window
Joining strength performances of metal skin and CFRP core laminate structures realized by compression-curing process, with supporting experiments
Luca Quagliato; Changsoon Jang; Naksoo Kim
AIP Conf. Proc. 1960, 020024 (2018) https://doi.org/10.1063/1.5034825
View articletitled, Joining strength performances of metal skin and CFRP core laminate structures realized by compression-curing process, with supporting experiments
Open the PDF for in another window
A cyber physical system approach for composite part: From smart manufacturing to predictive maintenance
Giacomo Quaranta; Emmanuelle Abisset-Chavanne; Francisco Chinesta; Jean-Louis Duval
AIP Conf. Proc. 1960, 020025 (2018) https://doi.org/10.1063/1.5034826
View articletitled, A cyber physical system approach for composite part: From smart manufacturing to predictive maintenance
Open the PDF for in another window
Influence of injection molding process parameters on fiber concentration distribution in long glass fiber reinforced polypropylene
Andrea Scantamburlo; Luca Gazzola; Marco Sorgato; Giovanni Lucchetta
AIP Conf. Proc. 1960, 020026 (2018) https://doi.org/10.1063/1.5034827
View articletitled, Influence of injection molding process parameters on fiber concentration distribution in long glass fiber reinforced polypropylene
Open the PDF for in another window
Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding
Christian Schillfahrt; Ewald Fauster; Ralf Schledjewski
AIP Conf. Proc. 1960, 020027 (2018) https://doi.org/10.1063/1.5034828
View articletitled, Forming of complex-shaped composite tubes using optimized bladder-assisted resin transfer molding
Open the PDF for in another window
Comparison of validation methods for forming simulations
Alexander Schug; Gabriel Kapphan; Georg Bardl; Roland Hinterhölzl; Klaus Drechsler
AIP Conf. Proc. 1960, 020028 (2018) https://doi.org/10.1063/1.5034829
View articletitled, Comparison of validation methods for forming simulations
Open the PDF for in another window
Formability study of hybrid carbon fibre/self-reinforced polypropylene composites
Marina Selezneva; Yentl Swolfs; Noriyuki Hirano; Ichiro Taketa; Takuya Karaki; Ignaas Verpoest; Larissa Gorbatikh
AIP Conf. Proc. 1960, 020029 (2018) https://doi.org/10.1063/1.5034830
View articletitled, Formability study of hybrid carbon fibre/self-reinforced polypropylene composites
Open the PDF for in another window
Feasibility of tailoring of press formed thermoplastic composite parts
J. Sinke
AIP Conf. Proc. 1960, 020030 (2018) https://doi.org/10.1063/1.5034831
View articletitled, Feasibility of tailoring of press formed thermoplastic composite parts
Open the PDF for in another window
Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP
T. K. Slange; L. L. Warnet; W. J. B. Grouve; R. Akkerman
AIP Conf. Proc. 1960, 020031 (2018) https://doi.org/10.1063/1.5034832
View articletitled, Consolidation quality and mechanical performance of stamp formed tailored blanks produced by rapid AFP
Open the PDF for in another window
Multi-scale modelling of non-uniform consolidation of uncured toughened unidirectional prepregs
G. Sorba; C. Binetruy; E. Syerko; A. Leygue; S. Comas-Cardona; J. P.-H. Belnoue; O. J. Nixon-Pearson; D. S. Ivanov; S. R. Hallett; S. G. Advani
AIP Conf. Proc. 1960, 020032 (2018) https://doi.org/10.1063/1.5034833
View articletitled, Multi-scale modelling of non-uniform consolidation of uncured toughened unidirectional prepregs
Open the PDF for in another window
Machine compliance in compression tests
Pedro Sousa; Jan Ivens; Stepan V. Lomov
AIP Conf. Proc. 1960, 020033 (2018) https://doi.org/10.1063/1.5034834
View articletitled, Machine compliance in compression tests
Open the PDF for in another window
Stitch modeling of non crimp fabric in forming simulations
Q. Steer; J. Colmars; P. Boisse
AIP Conf. Proc. 1960, 020034 (2018) https://doi.org/10.1063/1.5034835
View articletitled, Stitch modeling of non crimp fabric in forming simulations
Open the PDF for in another window
Simulation of the microwave heating of a thin multilayered composite material: A parameter analysis
Hermine Tertrais; Anaïs Barasinski; Francisco Chinesta
AIP Conf. Proc. 1960, 020035 (2018) https://doi.org/10.1063/1.5034836
View articletitled, Simulation of the microwave heating of a thin multilayered composite material: A parameter analysis
Open the PDF for in another window
Strain and temperature measurement in pultrusion processes by fiber Bragg grating sensors
Fausto Tucci; Felice Rubino; Pierpaolo Carlone
AIP Conf. Proc. 1960, 020036 (2018) https://doi.org/10.1063/1.5034837
View articletitled, Strain and temperature measurement in pultrusion processes by fiber Bragg grating sensors
Open the PDF for in another window
Stiffness and Poisson ratio in longitudinal compression of fiber yarns in meso-FE modelling of composite reinforcement forming
D. Wang; N. Naouar; E. Vidal-Salle; P. Boisse
AIP Conf. Proc. 1960, 020037 (2018) https://doi.org/10.1063/1.5034838
View articletitled, Stiffness and Poisson ratio in longitudinal compression of fiber yarns in meso-FE modelling of composite reinforcement forming
Open the PDF for in another window
Characterization and modeling of a highly-oriented thin film for composite forming
K. D. White; J. A. Sherwood
AIP Conf. Proc. 1960, 020038 (2018) https://doi.org/10.1063/1.5034839
View articletitled, Characterization and modeling of a highly-oriented thin film for composite forming
Open the PDF for in another window
Studies of in-plane shear behaviour of braided composite reinforcements
Shenglei Xiao; Peng Wang; Damien Soulat; Xavier Legrand; Hang Gao
AIP Conf. Proc. 1960, 020039 (2018) https://doi.org/10.1063/1.5034840
View articletitled, Studies of in-plane shear behaviour of braided composite reinforcements
Open the PDF for in another window
Analysis of residual transverse stresses in a thick UD glass/polyester pultruded profile using hole drilling with strain gage and digital image correlation
Onur Yuksel; Ismet Baran; Nuri Ersoy; Remko Akkerman
AIP Conf. Proc. 1960, 020040 (2018) https://doi.org/10.1063/1.5034841
View articletitled, Analysis of residual transverse stresses in a thick UD glass/polyester pultruded profile using hole drilling with strain gage and digital image correlation
Open the PDF for in another window
Non-hoop winding effect on bonding temperature of laser assisted tape winding process
Amin Zaami; Ismet Baran; Remko Akkerman
AIP Conf. Proc. 1960, 020041 (2018) https://doi.org/10.1063/1.5034842
View articletitled, Non-hoop winding effect on bonding temperature of laser assisted tape winding process
Open the PDF for in another window
A meta-model based approach for rapid formability estimation of continuous fibre reinforced components
Clemens Zimmerling; Dominik Dörr; Frank Henning; Luise Kärger
AIP Conf. Proc. 1960, 020042 (2018) https://doi.org/10.1063/1.5034843
View articletitled, A meta-model based approach for rapid formability estimation of continuous fibre reinforced components
Open the PDF for in another window

MS2 EXTRUSION AND DRAWING

Numerical investigations on the lateral angular co-extrusion of aluminium and steel
B.-A. Behrens; C. Klose; A. Chugreev; S. E. Thürer; J. Uhe
AIP Conf. Proc. 1960, 030001 (2018) https://doi.org/10.1063/1.5034844
View articletitled, Numerical investigations on the lateral angular co-extrusion of aluminium and steel
Open the PDF for in another window
Study on numerical simulation of asymmetric structure aluminum profile extrusion based on ALE method
Kun Chen; Yuan Qu; Siyi Ding; Changhui Liu; Fuyong Yang
AIP Conf. Proc. 1960, 030002 (2018) https://doi.org/10.1063/1.5034845
View articletitled, Study on numerical simulation of asymmetric structure aluminum profile extrusion based on ALE method
Open the PDF for in another window
A FEM simulation study of the solid state hydrostatic extrusion of PMMA
André L. M. Costa; Douglas B. Riffel; Wojciech Z. Misiolek; Henry S. Valberg
AIP Conf. Proc. 1960, 030003 (2018) https://doi.org/10.1063/1.5034846
View articletitled, A FEM simulation study of the solid state hydrostatic extrusion of PMMA
Open the PDF for in another window
A sustainable solid state recycling of pure aluminum by means of friction stir extrusion process (FSE)
Mohamad El Mehtedi; Archimede Forcellese; Michela Simoncini; Stefano Spigarelli
AIP Conf. Proc. 1960, 030004 (2018) https://doi.org/10.1063/1.5034847
View articletitled, A sustainable solid state recycling of pure aluminum by means of friction stir extrusion process (FSE)
Open the PDF for in another window
Optimized manufacture of nuclear fuel cladding tubes by FEA of hot extrusion and cold pilgering processes
Alexis Gaillac; Céline Ly
AIP Conf. Proc. 1960, 030005 (2018) https://doi.org/10.1063/1.5034848
View articletitled, Optimized manufacture of nuclear fuel cladding tubes by FEA of hot extrusion and cold pilgering processes
Open the PDF for in another window
Investigation of multi-stage cold forward extrusion process using coupled thermo-mechanical finite element analysis
Mehmet Okan Görtan
AIP Conf. Proc. 1960, 030006 (2018) https://doi.org/10.1063/1.5034849
View articletitled, Investigation of multi-stage cold forward extrusion process using coupled thermo-mechanical finite element analysis
Open the PDF for in another window
Experimental study on combined cold forging process of backward cup extrusion and piercing
Robinson Henry; Mathias Liewald
AIP Conf. Proc. 1960, 030007 (2018) https://doi.org/10.1063/1.5034850
View articletitled, Experimental study on combined cold forging process of backward cup extrusion and piercing
Open the PDF for in another window
Modification of the anisotropy and strength differential effect of extruded AZ31 by extrusion-shear
M. Jaehnke; F. Gensch; S. Mueller
AIP Conf. Proc. 1960, 030008 (2018) https://doi.org/10.1063/1.5034851
View articletitled, Modification of the anisotropy and strength differential effect of extruded AZ31 by extrusion-shear
Open the PDF for in another window
Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion
Dimos Paraskevas; Karel Kellens; Carlos Kampen; Amirahmad Mohammadi; Joost R. Duflou
AIP Conf. Proc. 1960, 030009 (2018) https://doi.org/10.1063/1.5034852
View articletitled, Complex deformation routes for direct recycling aluminium alloy scrap via industrial hot extrusion
Open the PDF for in another window
Study on the extrusion of nickel-based spark plug electrodes by numerical simulation
Q. Saby; C. Courbon; F. Salvatore; D. Fabre; F. Romeyer
AIP Conf. Proc. 1960, 030010 (2018) https://doi.org/10.1063/1.5034853
View articletitled, Study on the extrusion of nickel-based spark plug electrodes by numerical simulation
Open the PDF for in another window
Metal flow and temperature in direct extrusion of large-size aluminum billets
Henry Valberg; André L. M. Costa
AIP Conf. Proc. 1960, 030011 (2018) https://doi.org/10.1063/1.5034854
View articletitled, Metal flow and temperature in direct extrusion of large-size aluminum billets
Open the PDF for in another window

MS3 FORGING AND ROLLING

Ring rotational speed trend analysis by FEM approach in a Ring Rolling process
G. Allegri; L. Giorleo; E. Ceretti
AIP Conf. Proc. 1960, 040001 (2018) https://doi.org/10.1063/1.5034855
View articletitled, Ring rotational speed trend analysis by FEM approach in a Ring Rolling process
Open the PDF for in another window
Characterisation of the joining zone of serially arranged hybrid semi-finished components
B.-A. Behrens; A. Chugreev; T. Matthias
AIP Conf. Proc. 1960, 040002 (2018) https://doi.org/10.1063/1.5034856
View articletitled, Characterisation of the joining zone of serially arranged hybrid semi-finished components
Open the PDF for in another window
FE-simulation of hot forging with an integrated heat treatment with the objective of residual stress prediction
Bernd-Arno Behrens; Anna Chugreeva; Alexander Chugreev
AIP Conf. Proc. 1960, 040003 (2018) https://doi.org/10.1063/1.5034857
View articletitled, FE-simulation of hot forging with an integrated heat treatment with the objective of residual stress prediction
Open the PDF for in another window
The implementation of microstructural and heat treatment models to development of forming technology of critical aluminum-alloy parts
Nikolay Biba; Artem Alimov; Andrey Shitikov; Sergei Stebunov
AIP Conf. Proc. 1960, 040004 (2018) https://doi.org/10.1063/1.5034858
View articletitled, The implementation of microstructural and heat treatment models to development of forming technology of critical aluminum-alloy parts
Open the PDF for in another window
Characterization of hot bonding of bi-metal C45/25CrMo4 by plane strain compression test
Mohammed Enaim; Laurent Langlois; Sandra Zimmer-Chevret; Régis Bigot; Pierre Krumpipe
AIP Conf. Proc. 1960, 040005 (2018) https://doi.org/10.1063/1.5034859
View articletitled, Characterization of hot bonding of bi-metal C45/25CrMo4 by plane strain compression test
Open the PDF for in another window
A sectionwise defined model for the material description of 100Cr6 in the thixotropic state
B.-A. Behrens; A. Chugreev; M. Hootak
AIP Conf. Proc. 1960, 040006 (2018) https://doi.org/10.1063/1.5034860
View articletitled, A sectionwise defined model for the material description of 100Cr6 in the thixotropic state
Open the PDF for in another window
Influence of heat-pretreatments on the microstructural and mechanical properties of galfan-coated metal bonds
Illia Hordych; Dmytro Rodman; Florian Nürnberger; Hans Christian Schmidt; Alejandro Gonzalez Orive; Werner Homberg; Guido Grundmeier; Hans Jürgen Maier
AIP Conf. Proc. 1960, 040007 (2018) https://doi.org/10.1063/1.5034861
View articletitled, Influence of heat-pretreatments on the microstructural and mechanical properties of galfan-coated metal bonds
Open the PDF for in another window
Features of structure formation in the low modulus quasi-single crystal from Zr-25%Nb alloy at cold rolling
M. Isaenkova; Yu. Perlovich; V. Fesenko; Y. Babich; M. Zaripova; N. Krapivka
AIP Conf. Proc. 1960, 040008 (2018) https://doi.org/10.1063/1.5034862
View articletitled, Features of structure formation in the low modulus quasi-single crystal from Zr-25%Nb alloy at cold rolling
Open the PDF for in another window
Analysis of factors influencing the bond strength in roll bonding processes
Kavan Khaledi; Stephan Wulfinghoff; Stefanie Reese
AIP Conf. Proc. 1960, 040009 (2018) https://doi.org/10.1063/1.5034863
View articletitled, Analysis of factors influencing the bond strength in roll bonding processes
Open the PDF for in another window
Experimental and numerical study of the effect of rolling parameters on shaft deformation during the longitudinal rolling process
Marek Kowalik; Tomasz Trzepiecinski
AIP Conf. Proc. 1960, 040010 (2018) https://doi.org/10.1063/1.5034864
View articletitled, Experimental and numerical study of the effect of rolling parameters on shaft deformation during the longitudinal rolling process
Open the PDF for in another window
A method of increasing the depth of the plastically deformed layer in the roller burnishing process
Marek Kowalik; Tomasz Trzepiecinski
AIP Conf. Proc. 1960, 040011 (2018) https://doi.org/10.1063/1.5034865
View articletitled, A method of increasing the depth of the plastically deformed layer in the roller burnishing process
Open the PDF for in another window
Microstructure based procedure for process parameter control in rolling of aluminum thin foils
Kronsteiner Johannes; Evgeniya Kabliman; Philipp-Christoph Klimek
AIP Conf. Proc. 1960, 040012 (2018) https://doi.org/10.1063/1.5034866
View articletitled, Microstructure based procedure for process parameter control in rolling of aluminum thin foils
Open the PDF for in another window
Influence of the coating process on the tribological conditions during cold forging with a MoS2 based lubricant
Robby Lorenz; Hinnerk Hagenah; Marion Merklein
AIP Conf. Proc. 1960, 040013 (2018) https://doi.org/10.1063/1.5034867
View articletitled, Influence of the coating process on the tribological conditions during cold forging with a MoS<sub>2</sub> based lubricant
Open the PDF for in another window
Finite element simulations and experimental investigations on ductile fracture in cold forging of aluminum alloy
Amir Amiri; Amin Nikpour; Payam Saraeian
AIP Conf. Proc. 1960, 040014 (2018) https://doi.org/10.1063/1.5034868
View articletitled, Finite element simulations and experimental investigations on ductile fracture in cold forging of aluminum alloy
Open the PDF for in another window
A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills
Christian Overhagen; Paul Josef Mauk
AIP Conf. Proc. 1960, 040015 (2018) https://doi.org/10.1063/1.5034869
View articletitled, A model for prediction of profile and flatness of hot and cold rolled flat products in four-high mills
Open the PDF for in another window
Adapted diffusion processes for effective forging dies
H. Paschke; A. Nienhaus; K. Brunotte; T. Petersen; M. Siegmund; L. Lippold; M. Weber; M. Mejauschek; P. Landgraf; G. Braeuer; B.-A. Behrens; T. Lampke
AIP Conf. Proc. 1960, 040016 (2018) https://doi.org/10.1063/1.5034870
View articletitled, Adapted diffusion processes for effective forging dies
Open the PDF for in another window
Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size
Abdullah Qaban; Sumsun Naher
AIP Conf. Proc. 1960, 040017 (2018) https://doi.org/10.1063/1.5034871
View articletitled, Influence of Al content on the corrosion resistance of micro-alloyed hot rolled steel as a function of grain size
Open the PDF for in another window
Stable forming conditions and geometrical expansion of L-shape rings in ring rolling process
Luca Quagliato; Guido A. Berti; Dongwook Kim; Naksoo Kim
AIP Conf. Proc. 1960, 040018 (2018) https://doi.org/10.1063/1.5034872
View articletitled, Stable forming conditions and geometrical expansion of L-shape rings in ring rolling process
Open the PDF for in another window
Evaluation of interlocking bond strength between structured 1.0338 steel sheets and high pressure die cast AlMg5Si2
S. Senge; J. Brachmann; G. Hirt; A. Bührig-Polaczek
AIP Conf. Proc. 1960, 040019 (2018) https://doi.org/10.1063/1.5034873
View articletitled, Evaluation of interlocking bond strength between structured 1.0338 steel sheets and high pressure die cast AlMg5Si2
Open the PDF for in another window

MS4 INNOVATIVE JOINING BY FORMING TECHNOLOGIES

Joining of polymer-metal lightweight structures using self-piercing riveting (SPR) technique: Numerical approach and simulation results
Elias Amro; Afia Kouadri-Henni
AIP Conf. Proc. 1960, 050001 (2018) https://doi.org/10.1063/1.5034874
View articletitled, Joining of polymer-metal lightweight structures using self-piercing riveting (SPR) technique: Numerical approach and simulation results
Open the PDF for in another window
Bonding prediction in friction stir consolidation of aluminum alloys: A preliminary study
Dario Baffari; Anthony P. Reynolds; Xiao Li; Livan Fratini
AIP Conf. Proc. 1960, 050002 (2018) https://doi.org/10.1063/1.5034875
View articletitled, Bonding prediction in friction stir consolidation of aluminum alloys: A preliminary study
Open the PDF for in another window
Integral blow moulding for cycle time reduction of CFR-TP aluminium contour joint processing
Daniel Barfuss; Veit Würfel; Raik Grützner; Maik Gude; Roland Müller
AIP Conf. Proc. 1960, 050003 (2018) https://doi.org/10.1063/1.5034876
View articletitled, Integral blow moulding for cycle time reduction of CFR-TP aluminium contour joint processing
Open the PDF for in another window
Recrystallization characteristics and interfacial oxides on the compression bonding interface
Bijun Xie; Mingyue Sun; Bin Xu; Dianzhong Li
AIP Conf. Proc. 1960, 050004 (2018) https://doi.org/10.1063/1.5034877
View articletitled, Recrystallization characteristics and interfacial oxides on the compression bonding interface
Open the PDF for in another window
In temperature forming of friction stir lap welds in aluminium alloys
Carlo Bruni; Marcello Cabibbo; Luciano Greco; Massimiliano Pieralisi
AIP Conf. Proc. 1960, 050005 (2018) https://doi.org/10.1063/1.5034878
View articletitled, In temperature forming of friction stir lap welds in aluminium alloys
Open the PDF for in another window
Development of a procedure for forming assisted thermal joining of tubes
Hui Chen; Christian Löbbe; Daniel Staupendahl; A. Erman Tekkaya
AIP Conf. Proc. 1960, 050006 (2018) https://doi.org/10.1063/1.5034879
View articletitled, Development of a procedure for forming assisted thermal joining of tubes
Open the PDF for in another window
Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation
Hans Christian Schmidt; Werner Homberg; Alejandro Gonzalez Orive; Guido Grundmeier; Illia Hordych; Hans Jürgen Maier
AIP Conf. Proc. 1960, 050007 (2018) https://doi.org/10.1063/1.5034880
View articletitled, Cold pressure welding of aluminium-steel blanks: Manufacturing process and electrochemical surface preparation
Open the PDF for in another window
Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins
Romina Conte; Johannes Buhl; Giuseppina Ambrogio; Markus Bambach
AIP Conf. Proc. 1960, 050008 (2018) https://doi.org/10.1063/1.5034881
View articletitled, Joining of aluminum sheet and glass fiber reinforced polymer using extruded pins
Open the PDF for in another window
Friction riveting as an alternative mechanical fastening to join engineering plastics
Francesco Gagliardi; Romina Conte; Renato Bentrovato; Giorgio Simeoli; Pietro Russo; Giuseppina Ambrogio
AIP Conf. Proc. 1960, 050009 (2018) https://doi.org/10.1063/1.5034882
View articletitled, Friction riveting as an alternative mechanical fastening to join engineering plastics
Open the PDF for in another window
Modelling the strength of an aluminium-steel nailed joint
Fabien Goldspiegel; Katia Mocellin; Philippe Michel
AIP Conf. Proc. 1960, 050010 (2018) https://doi.org/10.1063/1.5034883
View articletitled, Modelling the strength of an aluminium-steel nailed joint
Open the PDF for in another window
Hybrid FSWeld-bonded joint fatigue behaviour
Enrico Lertora; Chiara Mandolfino; Carla Gambaro; Marco Pizzorni
AIP Conf. Proc. 1960, 050011 (2018) https://doi.org/10.1063/1.5034884
View articletitled, Hybrid FSWeld-bonded joint fatigue behaviour
Open the PDF for in another window
Welding abilities of UFG metals
Łukasz Morawiński; Tomasz Chmielewski; Lech Olejnik; Gianluca Buffa; Davide Campanella; Livan Fratini
AIP Conf. Proc. 1960, 050012 (2018) https://doi.org/10.1063/1.5034885
View articletitled, Welding abilities of UFG metals
Open the PDF for in another window
Numerical modeling and experimental validation of thermoplastic composites induction welding
Barbara Palmieri; Luigi Nele; Francesco Galise
AIP Conf. Proc. 1960, 050013 (2018) https://doi.org/10.1063/1.5034886
View articletitled, Numerical modeling and experimental validation of thermoplastic composites induction welding
Open the PDF for in another window
Determination of material distribution in heading process of small bimetallic bar
Wojciech Presz; Robert Cacko
AIP Conf. Proc. 1960, 050014 (2018) https://doi.org/10.1063/1.5034887
View articletitled, Determination of material distribution in heading process of small bimetallic bar
Open the PDF for in another window
Experimental analysis of mechanical joints strength by means of energy dissipation
Alexander Wolf; Remi Lafarge; Tino Kühn; Alexander Brosius
AIP Conf. Proc. 1960, 050015 (2018) https://doi.org/10.1063/1.5034888
View articletitled, Experimental analysis of mechanical joints strength by means of energy dissipation
Open the PDF for in another window
Interface bonding of SA508-3 steel under deformation and high temperature diffusion
Bin Xu; Chunjuan Shao; Mingyue Sun
AIP Conf. Proc. 1960, 050016 (2018) https://doi.org/10.1063/1.5034889
View articletitled, Interface bonding of SA508-3 steel under deformation and high temperature diffusion
Open the PDF for in another window

MS6 LASER MATERIAL FORMING

Evaluation between residual stresses obtained by neutron diffraction and simulation for dual phase steel welded by laser process
Afia Kouadri-Henni; Benoit Malard
AIP Conf. Proc. 1960, 060001 (2018) https://doi.org/10.1063/1.5034890
View articletitled, Evaluation between residual stresses obtained by neutron diffraction and simulation for dual phase steel welded by laser process
Open the PDF for in another window
Nd:YOV4 laser surface texturing on DLC coating: Effect on morphology, adhesion, and dry wear behavior
Maria Surfaro; Luca Giorleo; Lorenzo Montesano; Gabriele Allegri; Elisabetta Ceretti; Giovina Marina La Vecchia
AIP Conf. Proc. 1960, 060002 (2018) https://doi.org/10.1063/1.5034891
View articletitled, Nd:YOV4 laser surface texturing on DLC coating: Effect on morphology, adhesion, and dry wear behavior
Open the PDF for in another window
Some aspects of precise laser machining - Part 2: Experimental
Marcin Grabowski; Dominik Wyszynski; Robert Ostrowski
AIP Conf. Proc. 1960, 060003 (2018) https://doi.org/10.1063/1.5034892
View articletitled, Some aspects of precise laser machining - Part 2: Experimental
Open the PDF for in another window
Laser surface texturing of polypropylene to increase adhesive bonding
Chiara Mandolfino; Marco Pizzorni; Enrico Lertora; Carla Gambaro
AIP Conf. Proc. 1960, 060004 (2018) https://doi.org/10.1063/1.5034893
View articletitled, Laser surface texturing of polypropylene to increase adhesive bonding
Open the PDF for in another window
Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
S. A. H. Motaman; K. Komerla; T. Storms; U. Prahl; C. Brecher; W. Bleck
AIP Conf. Proc. 1960, 060005 (2018) https://doi.org/10.1063/1.5034894
View articletitled, Experimental and numerical investigation of dual phase steels formability during laser-assisted hole-flanging
Open the PDF for in another window
Investigating the effect of the high power and high speed CO2 laser surface melting on the residual stresses and corrosion resistance of 316L stainless steel
Muhannad A. Obeidi; Eanna McCarthy; Dermot Brabazon
AIP Conf. Proc. 1960, 060006 (2018) https://doi.org/10.1063/1.5034895
View articletitled, Investigating the effect of the high power and high speed CO<sub>2</sub> laser surface melting on the residual stresses and corrosion resistance of 316L stainless steel
Open the PDF for in another window
Some aspects of precise laser machining - Part 1: Theory
Dominik Wyszynski; Marcin Grabowski; Piotr Lipiec
AIP Conf. Proc. 1960, 060007 (2018) https://doi.org/10.1063/1.5034896
View articletitled, Some aspects of precise laser machining - Part 1: Theory
Open the PDF for in another window

MS7 MACHINING AND CUTTING

Tool wear analysis during duplex stainless steel trochoidal milling
Paulo Amaro; Pedro Ferreira; Fernando Simões
AIP Conf. Proc. 1960, 070001 (2018) https://doi.org/10.1063/1.5034897
View articletitled, Tool wear analysis during duplex stainless steel trochoidal milling
Open the PDF for in another window
Experimental evaluation of tool run-out in micro milling
Aldo Attanasio; Elisabetta Ceretti
AIP Conf. Proc. 1960, 070002 (2018) https://doi.org/10.1063/1.5034898
View articletitled, Experimental evaluation of tool run-out in micro milling
Open the PDF for in another window
Application of high speed machining technology in aviation
Paweł Bałon; Janusz Szostak; Bartłomiej Kiełbasa; Edward Rejman; Robert Smusz
AIP Conf. Proc. 1960, 070003 (2018) https://doi.org/10.1063/1.5034899
View articletitled, Application of high speed machining technology in aviation
Open the PDF for in another window
On the formation of adiabatic shear bands in titanium alloy Ti17 under severe loading conditions
H. Ben Boubaker; Y. Ayed; C. Mareau; G. Germain
AIP Conf. Proc. 1960, 070004 (2018) https://doi.org/10.1063/1.5034900
View articletitled, On the formation of adiabatic shear bands in titanium alloy Ti17 under severe loading conditions
Open the PDF for in another window
2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology
Mehdi Benhassine; Edouard Rivière-Lorphèvre; Pedro-Jose Arrazola; Pierre Gobin; David Dumas; Vinay Madhavan; Ohian Aizpuru; François Ducobu
AIP Conf. Proc. 1960, 070005 (2018) https://doi.org/10.1063/1.5034901
View articletitled, 2D simulations of orthogonal cutting of CFRP: Effect of tool angles on parameters of cut and chip morphology
Open the PDF for in another window
3D finite element modelling of sheet metal blanking process
Lukasz Bohdal; Leon Kukielka; Jaroslaw Chodor; Agnieszka Kulakowska; Radoslaw Patyk; Pawel Kaldunski
AIP Conf. Proc. 1960, 070006 (2018) https://doi.org/10.1063/1.5034902
View articletitled, 3D finite element modelling of sheet metal blanking process
Open the PDF for in another window
Evaluation of the correctness of the feed selection based on the analysis of chip’s shape
Jaroslaw Chodor; Leon Kukielka; Pawel Kaldunski; Lukasz Bohdal; Radoslaw Patyk; Agnieszka Kulakowska
AIP Conf. Proc. 1960, 070007 (2018) https://doi.org/10.1063/1.5034903
View articletitled, Evaluation of the correctness of the feed selection based on the analysis of chip’s shape
Open the PDF for in another window
Optimization of turning process through the analytic flank wear modelling
A. Del Prete; R. Franchi; D. De Lorenzis
AIP Conf. Proc. 1960, 070008 (2018) https://doi.org/10.1063/1.5034904
View articletitled, Optimization of turning process through the analytic flank wear modelling
Open the PDF for in another window
Numerical simulation of machining distortions on a forged aerospace component following a one and a multi-step approaches
Antonio Del Prete; Rodolfo Franchi; Fabrizio Antermite; Iolanda Donatiello
AIP Conf. Proc. 1960, 070009 (2018) https://doi.org/10.1063/1.5034905
View articletitled, Numerical simulation of machining distortions on a forged aerospace component following a one and a multi-step approaches
Open the PDF for in another window
Study of tapping process of carbon fiber reinforced plastic composites/AA7075 stacks
Alessio D’Orazio; Mohamad El Mehtedi; Archimede Forcellese; Alessia Nardinocchi; Michela Simoncini
AIP Conf. Proc. 1960, 070010 (2018) https://doi.org/10.1063/1.5034906
View articletitled, Study of tapping process of carbon fiber reinforced plastic composites/AA7075 stacks
Open the PDF for in another window
A new optimization tool path planning for 3-axis end milling of free-form surfaces based on efficient machining intervals
Duy-Duc Vu; Frédéric Monies; Walter Rubio
AIP Conf. Proc. 1960, 070011 (2018) https://doi.org/10.1063/1.5034907
View articletitled, A new optimization tool path planning for 3-axis end milling of free-form surfaces based on efficient machining intervals
Open the PDF for in another window
Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting
Lucas Equeter; François Ducobu; Edouard Rivière-Lorphèvre; Mustapha Abouridouane; Fritz Klocke; Pierre Dehombreux
AIP Conf. Proc. 1960, 070012 (2018) https://doi.org/10.1063/1.5034908
View articletitled, Estimation of the influence of tool wear on force signals: A finite element approach in AISI 1045 orthogonal cutting
Open the PDF for in another window
High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions
Stano Imbrogno; Sergio Rinaldi; Asier Gurruchaga Suarez; Pedro J. Arrazola; Domenico Umbrello
AIP Conf. Proc. 1960, 070013 (2018) https://doi.org/10.1063/1.5034909
View articletitled, High speed machinability of the aerospace alloy AA7075 T6 under different cooling conditions
Open the PDF for in another window
3D FE simulation of semi-finishing machining of Ti6Al4V additively manufactured by direct metal laser sintering
Stano Imbrogno; Sergio Rinaldi; Antonio Raso; Alberto Bordin; Stefania Bruschi; Domenico Umbrello
AIP Conf. Proc. 1960, 070014 (2018) https://doi.org/10.1063/1.5034910
View articletitled, 3D FE simulation of semi-finishing machining of Ti6Al4V additively manufactured by direct metal laser sintering
Open the PDF for in another window
Analysis of surface integrity in machining of AISI 304 stainless steel under various cooling and cutting conditions
F. Klocke; B. Döbbeler; S. Lung; T. Seelbach; I. S. Jawahir
AIP Conf. Proc. 1960, 070015 (2018) https://doi.org/10.1063/1.5034911
View articletitled, Analysis of surface integrity in machining of AISI 304 stainless steel under various cooling and cutting conditions
Open the PDF for in another window
Burnishing rolling process of the surface prepared in the turning process
Agnieszka Kulakowska; Leon Kukielka; Pawel Kaldunski; Lukasz Bohdal; Radoslaw Patyk; Jaroslaw Chodor; Krzysztof Kukielka
AIP Conf. Proc. 1960, 070016 (2018) https://doi.org/10.1063/1.5034912
View articletitled, Burnishing rolling process of the surface prepared in the turning process
Open the PDF for in another window
Effects of specialized drill bits on hole defects of CFRP laminates
Chao Li; Jinyang Xu; Ming Chen
AIP Conf. Proc. 1960, 070017 (2018) https://doi.org/10.1063/1.5034913
View articletitled, Effects of specialized drill bits on hole defects of CFRP laminates
Open the PDF for in another window
Cutting process simulation of flat drill
Shoichi Tamura; Takashi Matsumura
AIP Conf. Proc. 1960, 070018 (2018) https://doi.org/10.1063/1.5034914
View articletitled, Cutting process simulation of flat drill
Open the PDF for in another window
High performance cutting using micro-textured tools and low pressure jet coolant
Toshiyuki Obikawa; Ryuta Nakatsukasa; Mamoru Hayashi; Tatsumi Ohno
AIP Conf. Proc. 1960, 070019 (2018) https://doi.org/10.1063/1.5034915
View articletitled, High performance cutting using micro-textured tools and low pressure jet coolant
Open the PDF for in another window
Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate
Abdullah Özcan; Edouard Rivière-Lorphèvre; François Ducobu
AIP Conf. Proc. 1960, 070020 (2018) https://doi.org/10.1063/1.5034916
View articletitled, Corner smoothing of 2D milling toolpath using b-spline curve by optimizing the contour error and the feedrate
Open the PDF for in another window
Experimental and numerical researches of duplex burnishing process in aspect of achieved productive quality of the product
Radoslaw Patyk; Leon Kukielka; Pawel Kaldunski; Lukasz Bohdal; Jaroslaw Chodor; Agnieszka Kulakowska; Krzysztof Kukielka; Slawomir Nagnajewicz
AIP Conf. Proc. 1960, 070021 (2018) https://doi.org/10.1063/1.5034917
View articletitled, Experimental and numerical researches of duplex burnishing process in aspect of achieved productive quality of the product
Open the PDF for in another window
New numerical approach for the modelling of machining applied to aeronautical structural parts
Pierrick Rambaud; Katia Mocellin
AIP Conf. Proc. 1960, 070022 (2018) https://doi.org/10.1063/1.5034918
View articletitled, New numerical approach for the modelling of machining applied to aeronautical structural parts
Open the PDF for in another window
Orthogonal cutting of laser beam melted parts
Elisa Götze; Frederik Zanger; Volker Schulze
AIP Conf. Proc. 1960, 070023 (2018) https://doi.org/10.1063/1.5034919
View articletitled, Orthogonal cutting of laser beam melted parts
Open the PDF for in another window
Experimental investigation of edge hardening and edge cracking sensitivity of burr-free parts
Sergei Senn; Mathias Liewald
AIP Conf. Proc. 1960, 070024 (2018) https://doi.org/10.1063/1.5034920
View articletitled, Experimental investigation of edge hardening and edge cracking sensitivity of burr-free parts
Open the PDF for in another window
Process based analysis of manually controlled drilling processes for bone
Uwe Teicher; Anas Ben Achour; Andreas Nestler; Alexander Brosius; Günter Lauer
AIP Conf. Proc. 1960, 070025 (2018) https://doi.org/10.1063/1.5034921
View articletitled, Process based analysis of manually controlled drilling processes for bone
Open the PDF for in another window
High productivity mould robotic milling in Al-5083
Iker Urresti; Pedro Jose Arrazola; Klaus Bonde Ørskov; Jose Angel Pelegay
AIP Conf. Proc. 1960, 070026 (2018) https://doi.org/10.1063/1.5034922
View articletitled, High productivity mould robotic milling in Al-5083
Open the PDF for in another window
Effect of micro-scale texturing on the cutting tool performance
D. Vasumathy; Anil Meena
AIP Conf. Proc. 1960, 070027 (2018) https://doi.org/10.1063/1.5034923
View articletitled, Effect of micro-scale texturing on the cutting tool performance
Open the PDF for in another window

MS8 NANOSTRUCTURED MATERIALS FABRICATION AND APPLICATIONS

Dynamics of solid nanoparticles near a liquid-liquid interface
Ali Daher; Amine Ammar; Abbas Hijazi
AIP Conf. Proc. 1960, 080001 (2018) https://doi.org/10.1063/1.5034924
View articletitled, Dynamics of solid nanoparticles near a liquid-liquid interface
Open the PDF for in another window
Thermal behavior of copper processed by ECAP at elevated temperatures
Viktor Gonda
AIP Conf. Proc. 1960, 080002 (2018) https://doi.org/10.1063/1.5034925
View articletitled, Thermal behavior of copper processed by ECAP at elevated temperatures
Open the PDF for in another window
Surface structuring of boron doped CVD diamond by micro electrical discharge machining
A. Schubert; T. Berger; A. Martin; M. Hackert-Oschätzchen; N. Treffkorn; R. Kühn
AIP Conf. Proc. 1960, 080003 (2018) https://doi.org/10.1063/1.5034926
View articletitled, Surface structuring of boron doped CVD diamond by micro electrical discharge machining
Open the PDF for in another window

MS9 NEW AND ADVANCED NUMERICAL STRATEGIES FOR MATERIAL FORMING

Reshaping of large aeronautical structural parts: A simplified simulation approach
Ramiro Mena; José V. Aguado; Stéphane Guinard; Antonio Huerta
AIP Conf. Proc. 1960, 090001 (2018) https://doi.org/10.1063/1.5034927
View articletitled, Reshaping of large aeronautical structural parts: A simplified simulation approach
Open the PDF for in another window
Experimental validation of a new heterogeneous mechanical test design
J. Aquino; A. Andrade Campos; N. Souto; S. Thuillier
AIP Conf. Proc. 1960, 090002 (2018) https://doi.org/10.1063/1.5034928
View articletitled, Experimental validation of a new heterogeneous mechanical test design
Open the PDF for in another window
A nodally condensed SUPG formulation for free-surface computation of steady-state flows constrained by unilateral contact - Application to rolling
Shitij Arora; Lionel Fourment
AIP Conf. Proc. 1960, 090003 (2018) https://doi.org/10.1063/1.5034929
View articletitled, A nodally condensed SUPG formulation for free-surface computation of steady-state flows constrained by unilateral contact - Application to rolling
Open the PDF for in another window
Model and system learners, optimal process constructors and kinetic theory-based goal-oriented design: A new paradigm in materials and processes informatics
Emmanuelle Abisset-Chavanne; Jean Louis Duval; Elias Cueto; Francisco Chinesta
AIP Conf. Proc. 1960, 090004 (2018) https://doi.org/10.1063/1.5034930
View articletitled, Model and system learners, optimal process constructors and kinetic theory-based goal-oriented design: A new paradigm in materials and processes informatics
Open the PDF for in another window
Consistent data-driven computational mechanics
D. González; F. Chinesta; E. Cueto
AIP Conf. Proc. 1960, 090005 (2018) https://doi.org/10.1063/1.5034931
View articletitled, Consistent data-driven computational mechanics
Open the PDF for in another window
Data-driven in computational plasticity
R. Ibáñez; E. Abisset-Chavanne; E. Cueto; F. Chinesta
AIP Conf. Proc. 1960, 090006 (2018) https://doi.org/10.1063/1.5034932
View articletitled, Data-driven in computational plasticity
Open the PDF for in another window
Multiphysical FE-analysis of a front-end bending phenomenon in a hot strip mill
Joonas Ilmola; Oskari Seppälä; Olli Leinonen; Aarne Pohjonen; Jari Larkiola; Juha Jokisaari; Eero Putaansuu
AIP Conf. Proc. 1960, 090007 (2018) https://doi.org/10.1063/1.5034933
View articletitled, Multiphysical FE-analysis of a front-end bending phenomenon in a hot strip mill
Open the PDF for in another window
Adaptive temporal refinement in injection molding
Violeta Karyofylli; Mauritius Schmitz; Christian Hopmann; Marek Behr
AIP Conf. Proc. 1960, 090008 (2018) https://doi.org/10.1063/1.5034934
View articletitled, Adaptive temporal refinement in injection molding
Open the PDF for in another window
Computational cost of two alternative formulations of Cahn-Hilliard equations
Maciej Paszyński; Grzegorz Gurgul; Marcin Łoś; Danuta Szeliga
AIP Conf. Proc. 1960, 090009 (2018) https://doi.org/10.1063/1.5034935
View articletitled, Computational cost of two alternative formulations of Cahn-Hilliard equations
Open the PDF for in another window
Computer simulations of austenite decomposition of microalloyed 700 MPa steel during cooling
Aarne Pohjonen; Joni Paananen; Juho Mourujärvi; Timo Manninen; Jari Larkiola; David Porter
AIP Conf. Proc. 1960, 090010 (2018) https://doi.org/10.1063/1.5034936
View articletitled, Computer simulations of austenite decomposition of microalloyed 700 MPa steel during cooling
Open the PDF for in another window
Rupture model based on non-associated plasticity
Adrien Pradeau; Jeong Whan Yoon; Sandrine Thuillier; Yanshan Lou; Shunying Zhang
AIP Conf. Proc. 1960, 090011 (2018) https://doi.org/10.1063/1.5034937
View articletitled, Rupture model based on non-associated plasticity
Open the PDF for in another window
Numerical modelling of heat transfer in a cavity due to liquid jet impingement for liquid supported stretch blow moulding
Trevor Smyth; Gary Menary; Marco Geron
AIP Conf. Proc. 1960, 090012 (2018) https://doi.org/10.1063/1.5034938
View articletitled, Numerical modelling of heat transfer in a cavity due to liquid jet impingement for liquid supported stretch blow moulding
Open the PDF for in another window
Improved failure prediction in forming simulations through pre-strain mapping
Siddharth Upadhya; Daniel Staupendahl; Martin Heuse; A. Erman Tekkaya
AIP Conf. Proc. 1960, 090013 (2018) https://doi.org/10.1063/1.5034939
View articletitled, Improved failure prediction in forming simulations through pre-strain mapping
Open the PDF for in another window
Explicit and implicit springback simulation in sheet metal forming using fully coupled ductile damage and distortional hardening model
M. Yetna n’jock; B. Houssem; C. Labergere; K. Saanouni; Y. Zhenming
AIP Conf. Proc. 1960, 090014 (2018) https://doi.org/10.1063/1.5034940
View articletitled, Explicit and implicit springback simulation in sheet metal forming using fully coupled ductile damage and distortional hardening model
Open the PDF for in another window

MS10 NON-CONVENTIONAL PROCESSES

Numerical simulation of stress distribution in Inconel 718 components realized by metal injection molding during supercritical debinding
Aboubakry Agne; Thierry Barrière
AIP Conf. Proc. 1960, 100001 (2018) https://doi.org/10.1063/1.5034941
View articletitled, Numerical simulation of stress distribution in Inconel 718 components realized by metal injection molding during supercritical debinding
Open the PDF for in another window
Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding
Antonello Astarita; Luca Boccarusso; Luigi Carrino; Massimo Durante; Fabrizio Memola Capece Minutolo; Antonino Squillace
AIP Conf. Proc. 1960, 100002 (2018) https://doi.org/10.1063/1.5034942
View articletitled, Study of the joining of polycarbonate panels in butt joint configuration through friction stir welding
Open the PDF for in another window
Analysis of spring-in in U-shaped composite laminates: Numerical and experimental results
Costanzo Bellini; Luca Sorrentino; Wilma Polini; Gianluca Parodo
AIP Conf. Proc. 1960, 100003 (2018) https://doi.org/10.1063/1.5034943
View articletitled, Analysis of spring-in in U-shaped composite laminates: Numerical and experimental results
Open the PDF for in another window
Deposition of aluminum coatings on bio-composite laminates
L. Boccarusso; A. Viscusi; M. Durante; A. Astarita; D. De Fazio; R. Sansone; A. Caraviello; L. Carrino
AIP Conf. Proc. 1960, 100004 (2018) https://doi.org/10.1063/1.5034944
View articletitled, Deposition of aluminum coatings on bio-composite laminates
Open the PDF for in another window
A modeling of elementary passes taking into account the firing angle in abrasive water jet machining of titanium alloy
Van-Hung Bui; Patrick Gilles; Guillaume Cohen; Walter Rubio
AIP Conf. Proc. 1960, 100005 (2018) https://doi.org/10.1063/1.5034945
View articletitled, A modeling of elementary passes taking into account the firing angle in abrasive water jet machining of titanium alloy
Open the PDF for in another window
Single point incremental forming: Formability of PC sheets
A. Formisano; L. Boccarusso; L. Carrino; F. Lambiase; F. Memola Capece Minutolo
AIP Conf. Proc. 1960, 100006 (2018) https://doi.org/10.1063/1.5034946
View articletitled, Single point incremental forming: Formability of PC sheets
Open the PDF for in another window
Improvement of the mechanical properties of reinforced aluminum foam samples
A. Formisano; A. Barone; L. Carrino; D. De Fazio; A. Langella; A. Viscusi; M. Durante
AIP Conf. Proc. 1960, 100007 (2018) https://doi.org/10.1063/1.5034947
View articletitled, Improvement of the mechanical properties of reinforced aluminum foam samples
Open the PDF for in another window
Formability of paperboard during deep-drawing with local steam application
Wilken Franke; Philipp Stein; Sven Dörsam; Peter Groche
AIP Conf. Proc. 1960, 100008 (2018) https://doi.org/10.1063/1.5034948
View articletitled, Formability of paperboard during deep-drawing with local steam application
Open the PDF for in another window
The experimental research on electrodischarge drilling of high aspect ratio holes in Inconel 718
Piotr Lipiec; Magdalena Machno; Sebastian Skoczypiec
AIP Conf. Proc. 1960, 100009 (2018) https://doi.org/10.1063/1.5034949
View articletitled, The experimental research on electrodischarge drilling of high aspect ratio holes in Inconel 718
Open the PDF for in another window
Laser marking as a result of applying reverse engineering
Andrei Mihalache; Gheorghe Nagîţ; Marius Ionuţ Rîpanu; Laurenţiu Slătineanu; Oana Dodun; Margareta Coteaţă
AIP Conf. Proc. 1960, 100010 (2018) https://doi.org/10.1063/1.5034950
View articletitled, Laser marking as a result of applying reverse engineering
Open the PDF for in another window
Thermo-mechanical modeling of laser treatment on titanium cold-spray coatings
V. Paradiso; F. Rubino; F. Tucci; A. Astarita; P. Carlone
AIP Conf. Proc. 1960, 100011 (2018) https://doi.org/10.1063/1.5034951
View articletitled, Thermo-mechanical modeling of laser treatment on titanium cold-spray coatings
Open the PDF for in another window
Dynamic effect in ultrasonic assisted micro-upsetting
Wojciech Presz
AIP Conf. Proc. 1960, 100012 (2018) https://doi.org/10.1063/1.5034952
View articletitled, Dynamic effect in ultrasonic assisted micro-upsetting
Open the PDF for in another window
Grading technologies for the manufacture of innovative cutting blades
Tim Rostek; Werner Homberg
AIP Conf. Proc. 1960, 100013 (2018) https://doi.org/10.1063/1.5034953
View articletitled, Grading technologies for the manufacture of innovative cutting blades
Open the PDF for in another window
Local density measurement of additive manufactured copper parts by instrumented indentation
Loredana Santo; Fabrizio Quadrini; Denise Bellisario; Giovanni Matteo Tedde; Mariano Zarcone; Gildo Di Domenico; Pierpaolo D’Angelo; Diego Corona
AIP Conf. Proc. 1960, 100014 (2018) https://doi.org/10.1063/1.5034954
View articletitled, Local density measurement of additive manufactured copper parts by instrumented indentation
Open the PDF for in another window
Research on electrodischarge drilling of polycrystalline diamond with increased gap voltage
Sebastian Skoczypiec; Wojciech Bizoń; Agnieszka Żyra
AIP Conf. Proc. 1960, 100015 (2018) https://doi.org/10.1063/1.5034955
View articletitled, Research on electrodischarge drilling of polycrystalline diamond with increased gap voltage
Open the PDF for in another window
Application of magnetic pulse forming to aeronautic small pieces
C. Sow; G. Bazin; D. Daniel; E. Bon; D. Priem; G. Racineux
AIP Conf. Proc. 1960, 100016 (2018) https://doi.org/10.1063/1.5034956
View articletitled, Application of magnetic pulse forming to aeronautic small pieces
Open the PDF for in another window
Numerical investigations on the rebound phenomena and the bonding mechanisms in cold spray processes
A. Viscusi
AIP Conf. Proc. 1960, 100017 (2018) https://doi.org/10.1063/1.5034957
View articletitled, Numerical investigations on the rebound phenomena and the bonding mechanisms in cold spray processes
Open the PDF for in another window

MS11 OPTIMIZATION AND INVERSE ANALYSIS IN FORMING

On the design of innovative heterogeneous tests using a shape optimization approach
J. Aquino; A. Andrade Campos; N. Souto; S. Thuillier
AIP Conf. Proc. 1960, 110001 (2018) https://doi.org/10.1063/1.5034958
View articletitled, On the design of innovative heterogeneous tests using a shape optimization approach
Open the PDF for in another window
Metamodeling and optimization of the THF process with pulsating pressure
Marco Bucconi; Matteo Strano
AIP Conf. Proc. 1960, 110002 (2018) https://doi.org/10.1063/1.5034959
View articletitled, Metamodeling and optimization of the THF process with pulsating pressure
Open the PDF for in another window
Illustration of an improved non-invasive form finding algorithm
Michael Caspari; Philipp Landkammer; Paul Steinmann
AIP Conf. Proc. 1960, 110003 (2018) https://doi.org/10.1063/1.5034960
View articletitled, Illustration of an improved non-invasive form finding algorithm
Open the PDF for in another window
CFD-based optimization in plastics extrusion
Sebastian Eusterholz; Stefanie Elgeti
AIP Conf. Proc. 1960, 110004 (2018) https://doi.org/10.1063/1.5034961
View articletitled, CFD-based optimization in plastics extrusion
Open the PDF for in another window
Comparison of optimization algorithms for the slow shot phase in HPDC
Markus Frings; Benjamin Berkels; Marek Behr; Stefanie Elgeti
AIP Conf. Proc. 1960, 110005 (2018) https://doi.org/10.1063/1.5034962
View articletitled, Comparison of optimization algorithms for the slow shot phase in HPDC
Open the PDF for in another window
Approach to a manufacture-oriented modeling of bent tubes depending on the curvature distribution during three-roll-push-bending
Sebastian Groth; Bernd Engel; Peter Frohn
AIP Conf. Proc. 1960, 110006 (2018) https://doi.org/10.1063/1.5034963
View articletitled, Approach to a manufacture-oriented modeling of bent tubes depending on the curvature distribution during three-roll-push-bending
Open the PDF for in another window
Identification of material parameters for plasticity models: A comparative study on the finite element model updating and the virtual fields method
J. M. P. Martins; S. Thuillier; A. Andrade-Campos
AIP Conf. Proc. 1960, 110007 (2018) https://doi.org/10.1063/1.5034964