Skip Nav Destination
Issues
PRELIMINARY
Preface: 2nd International Conference on Advances in Materials, Machinery, Electronics (AMME 2018)
AIP Conf. Proc. 1955, 010001 (2018)
https://doi.org/10.1063/1.5033572
1. MATERIALS SCIENCE AND ENGINEERING
Understanding the corrosion behavior of amorphous multiple-layer carbon coating
AIP Conf. Proc. 1955, 020001 (2018)
https://doi.org/10.1063/1.5033573
Synthesis and crystal structure of 4-amino-3,5-dinitropyrazole sodium salt
AIP Conf. Proc. 1955, 020003 (2018)
https://doi.org/10.1063/1.5033575
Experimental study on performance of new low-density proppant
AIP Conf. Proc. 1955, 020004 (2018)
https://doi.org/10.1063/1.5033576
Finite element simulation of a novel composite light-weight microporous cladding panel
AIP Conf. Proc. 1955, 020005 (2018)
https://doi.org/10.1063/1.5033577
Effect of high energy ball milling on electromagnetic properties of FeNi absorbing materials
AIP Conf. Proc. 1955, 020006 (2018)
https://doi.org/10.1063/1.5033578
Analysis on mechanics response of long-life asphalt pavement at moist hot heavy loading area
AIP Conf. Proc. 1955, 020007 (2018)
https://doi.org/10.1063/1.5033579
Preparation and characteristics of TFMB functionalized graphene oxide/polyimide nanocomposite films
AIP Conf. Proc. 1955, 020008 (2018)
https://doi.org/10.1063/1.5033580
Effect of TiO2 photocatalytic preservation on quality of kiwifruit during shelf life
AIP Conf. Proc. 1955, 020010 (2018)
https://doi.org/10.1063/1.5033582
Cyclic hardening behavior of extruded ZK60 magnesium alloy with different grain sizes
AIP Conf. Proc. 1955, 020012 (2018)
https://doi.org/10.1063/1.5033584
Mechanical and tribological property of single layer graphene oxide reinforced titanium matrix composite coating
AIP Conf. Proc. 1955, 020014 (2018)
https://doi.org/10.1063/1.5033586
The application of ground high precision magnetic survey in maoding copper polymetallic deposit, Yunnan Province
AIP Conf. Proc. 1955, 020015 (2018)
https://doi.org/10.1063/1.5033587
Efficient adsorption of Hg (II) ions in water by activated carbon modified with melamine
AIP Conf. Proc. 1955, 020016 (2018)
https://doi.org/10.1063/1.5033588
In vitro toxicity test of nano-sized magnesium oxide synthesized via solid-phase transformation
AIP Conf. Proc. 1955, 020017 (2018)
https://doi.org/10.1063/1.5033589
Study on the new technology of removing gangue and retaining roadway in complicated roof condition
AIP Conf. Proc. 1955, 020018 (2018)
https://doi.org/10.1063/1.5033590
Effect of low temperature regression and aging on structure and properties of Al-B electric round rods
AIP Conf. Proc. 1955, 020019 (2018)
https://doi.org/10.1063/1.5033591
The experiment of the elemental mercury was removed from natural gas by 4A molecular sieve
AIP Conf. Proc. 1955, 020020 (2018)
https://doi.org/10.1063/1.5033592
Heat treatment on FeCo particles to enhance the efficient microwave absorption performance
AIP Conf. Proc. 1955, 020021 (2018)
https://doi.org/10.1063/1.5033593
Synthesis and performance characterization of 2-(dinitromethylene)-1-nitro-1, 3-diazacyclopentane
AIP Conf. Proc. 1955, 020022 (2018)
https://doi.org/10.1063/1.5033594
Application research of 3D additive manufacturing technology in the nail shell
AIP Conf. Proc. 1955, 020023 (2018)
https://doi.org/10.1063/1.5033595
Compressive and flexural strength of high strength phase change mortar
AIP Conf. Proc. 1955, 020024 (2018)
https://doi.org/10.1063/1.5033596
Study on creep of fiber reinforced ultra-high strength concrete based on strength
AIP Conf. Proc. 1955, 020025 (2018)
https://doi.org/10.1063/1.5033597
Effect of PVA fiber content on creep property of fiber reinforced high-strength concrete columns
AIP Conf. Proc. 1955, 020026 (2018)
https://doi.org/10.1063/1.5033598
2. MECHANICAL AND MANUFACTURING ENGINEERING, STRUCTURAL OPTIMIZATION
Computer modeling and simulation analysis of bearing capacity after reinforcement of underground frame structure
AIP Conf. Proc. 1955, 030001 (2018)
https://doi.org/10.1063/1.5033600
Study on the performance of the articulated mechanism of tracked all-terrain vehicle
AIP Conf. Proc. 1955, 030002 (2018)
https://doi.org/10.1063/1.5033601
Analysis of hydraulic steering system of tracked all-terrain vehicles’ articulated mechanism
AIP Conf. Proc. 1955, 030003 (2018)
https://doi.org/10.1063/1.5033602
Discussion on mass concrete construction of wind turbine generator foundation
AIP Conf. Proc. 1955, 030004 (2018)
https://doi.org/10.1063/1.5033603
Research on the effects of wind power grid to the distribution network of Henan province
AIP Conf. Proc. 1955, 030005 (2018)
https://doi.org/10.1063/1.5033604
Design of large mechanical transmission system based on finite element analysis
AIP Conf. Proc. 1955, 030007 (2018)
https://doi.org/10.1063/1.5033606
Research on bearing fault diagnosis of large machinery based on mathematical morphology
AIP Conf. Proc. 1955, 030008 (2018)
https://doi.org/10.1063/1.5033607
Design and study of water supply system for supercritical unit boiler in thermal power station
AIP Conf. Proc. 1955, 030010 (2018)
https://doi.org/10.1063/1.5033609
Research on simulation of supercritical steam turbine system in large thermal power station
AIP Conf. Proc. 1955, 030011 (2018)
https://doi.org/10.1063/1.5033610
Research on optimization of combustion efficiency of thermal power unit based on genetic algorithm
AIP Conf. Proc. 1955, 030012 (2018)
https://doi.org/10.1063/1.5033611
Reliability optimization design of the gear modification coefficient based on the meshing stiffness
AIP Conf. Proc. 1955, 030015 (2018)
https://doi.org/10.1063/1.5033614
A new similarity method to establish similarity for global bending modes of stiffened cylindrical shells
AIP Conf. Proc. 1955, 030018 (2018)
https://doi.org/10.1063/1.5033617
The experiment research of the friction sliding isolation structure
AIP Conf. Proc. 1955, 030019 (2018)
https://doi.org/10.1063/1.5033618
A new shape editing method for the design of fracture fixation plates based on stress analysis
AIP Conf. Proc. 1955, 030021 (2018)
https://doi.org/10.1063/1.5033620
Parallel discontinuous Galerkin FEM for computing hyperbolic conservation law on unstructured grids
AIP Conf. Proc. 1955, 030022 (2018)
https://doi.org/10.1063/1.5033621
Research on the winding losses based on finite element method for transformer
AIP Conf. Proc. 1955, 030023 (2018)
https://doi.org/10.1063/1.5033622
A reliability analysis framework with Monte Carlo simulation for weld structure of crane’s beam
AIP Conf. Proc. 1955, 030024 (2018)
https://doi.org/10.1063/1.5033623
A method of measuring and correcting tilt of anti - vibration wind turbines based on screening algorithm
AIP Conf. Proc. 1955, 030026 (2018)
https://doi.org/10.1063/1.5033625
Fabrication of silica hollow particles using yeast cells as a template
AIP Conf. Proc. 1955, 030027 (2018)
https://doi.org/10.1063/1.5033626
Analysis and optimization of dynamic model of eccentric shaft grinder
AIP Conf. Proc. 1955, 030030 (2018)
https://doi.org/10.1063/1.5033629
Research on friction torque analysis of planetary roller screw mechanism considering load distribution
AIP Conf. Proc. 1955, 030031 (2018)
https://doi.org/10.1063/1.5033630
Influence of ventilation structure on air flow distribution of large turbo-generator
AIP Conf. Proc. 1955, 030032 (2018)
https://doi.org/10.1063/1.5033631
Research on time synchronization scheme of MES systems in manufacturing enterprise
AIP Conf. Proc. 1955, 030033 (2018)
https://doi.org/10.1063/1.5033632
Research on manufacturing service behavior modeling based on block chain theory
AIP Conf. Proc. 1955, 030035 (2018)
https://doi.org/10.1063/1.5033634
Simulation of wave resistance induced by moving pressure distributions over mild slope beach
AIP Conf. Proc. 1955, 030036 (2018)
https://doi.org/10.1063/1.5033635
A numerical comparison of cold flow and combustion characteristics for GCH4/GO2 splash platelet injector
AIP Conf. Proc. 1955, 030037 (2018)
https://doi.org/10.1063/1.5033636
The hydrodynamic design and critical techniques for 1m×1m water tunnel
AIP Conf. Proc. 1955, 030038 (2018)
https://doi.org/10.1063/1.5033637
Computer simulation of explosion crater in dams with different buried depths of explosive
AIP Conf. Proc. 1955, 030039 (2018)
https://doi.org/10.1063/1.5033638
Precession feature extraction of ballistic missile warhead with high velocity
AIP Conf. Proc. 1955, 030041 (2018)
https://doi.org/10.1063/1.5033640
Optimization analysis of thermal management system for electric vehicle battery pack
AIP Conf. Proc. 1955, 030042 (2018)
https://doi.org/10.1063/1.5033641
Research on influence of wax deposition on flow state in coiled tubing with cable inside
AIP Conf. Proc. 1955, 030045 (2018)
https://doi.org/10.1063/1.5033644
Construct mine environment monitoring system based on wireless mesh network
AIP Conf. Proc. 1955, 030047 (2018)
https://doi.org/10.1063/1.5033646
Fast magnetic resonance imaging based on high degree total variation
AIP Conf. Proc. 1955, 030048 (2018)
https://doi.org/10.1063/1.5033647
Research and application of self - propagating welding technology
AIP Conf. Proc. 1955, 030049 (2018)
https://doi.org/10.1063/1.5033648
Optimization of spent fuel pool weir gate driving mechanism
AIP Conf. Proc. 1955, 030051 (2018)
https://doi.org/10.1063/1.5033650
The research progress of perforating gun inner wall blind hole machining method
AIP Conf. Proc. 1955, 030052 (2018)
https://doi.org/10.1063/1.5033651
Influence of structural parameters of deep groove ball bearings on vibration
AIP Conf. Proc. 1955, 030053 (2018)
https://doi.org/10.1063/1.5033652
Analysis of dangerous area of single berth oil tanker operations based on CFD
AIP Conf. Proc. 1955, 030054 (2018)
https://doi.org/10.1063/1.5033653
Design of a leak detection device for marine airtight container
AIP Conf. Proc. 1955, 030055 (2018)
https://doi.org/10.1063/1.5033654
Construction of VLCC marine oil storage cost index system
AIP Conf. Proc. 1955, 030056 (2018)
https://doi.org/10.1063/1.5033655
Monitoring and analysis of liquid storage in LNG tank based on different support springs
AIP Conf. Proc. 1955, 030058 (2018)
https://doi.org/10.1063/1.5033657
Research on natural frequency based on modal test for high speed vehicles
AIP Conf. Proc. 1955, 030059 (2018)
https://doi.org/10.1063/1.5033658
A method to assess the situation of air combat based on the missile attack zone
AIP Conf. Proc. 1955, 030060 (2018)
https://doi.org/10.1063/1.5033659
Numerical simulation of gas distribution in goaf under Y ventilation mode
AIP Conf. Proc. 1955, 030062 (2018)
https://doi.org/10.1063/1.5033661
The preparation and infrared radar stealth performance test of a new paraffin-based phase transition microcapsule
AIP Conf. Proc. 1955, 030063 (2018)
https://doi.org/10.1063/1.5033662
Study on optimum length of raw material in stainless steel high-lock nuts forging
AIP Conf. Proc. 1955, 030064 (2018)
https://doi.org/10.1063/1.5033663
2. Mechanical and Manufacturing Engineering, Structural Optimization
3. ELECTRONICS, COMMUNICATIONS AND COMPUTING RELATED TECHNOLOGIES
Study on identification method of auto refurbishment test
AIP Conf. Proc. 1955, 040001 (2018)
https://doi.org/10.1063/1.5033665
Application of wavelet analysis in determining the periodicity of global warming
AIP Conf. Proc. 1955, 040003 (2018)
https://doi.org/10.1063/1.5033667
Computational inverse methods of heat source in fatigue damage problems
AIP Conf. Proc. 1955, 040004 (2018)
https://doi.org/10.1063/1.5033668
Dual motor drive vehicle speed synchronization and coordination control strategy
AIP Conf. Proc. 1955, 040005 (2018)
https://doi.org/10.1063/1.5033669
Designing of a self-adaptive digital filter using genetic algorithm
AIP Conf. Proc. 1955, 040006 (2018)
https://doi.org/10.1063/1.5033670
Monte-Carlo simulation of spatial resolution of an image intensifier in a saturation mode
AIP Conf. Proc. 1955, 040007 (2018)
https://doi.org/10.1063/1.5033671
Optimization of multi-objective micro-grid based on improved particle swarm optimization algorithm
AIP Conf. Proc. 1955, 040009 (2018)
https://doi.org/10.1063/1.5033673
Research on detection method of UAV obstruction based on binocular vision
AIP Conf. Proc. 1955, 040010 (2018)
https://doi.org/10.1063/1.5033674
Design and implementation of a unified certification management system based on seismic business
AIP Conf. Proc. 1955, 040011 (2018)
https://doi.org/10.1063/1.5033675
Alcoholism detection in magnetic resonance imaging by Haar wavelet transform and back propagation neural network
AIP Conf. Proc. 1955, 040012 (2018)
https://doi.org/10.1063/1.5033676
An effective model based on Haar wavelet entropy and genetic algorithm for fruit identification
AIP Conf. Proc. 1955, 040013 (2018)
https://doi.org/10.1063/1.5033677
Summary on reliability analysis of distributed power access on distribution network
AIP Conf. Proc. 1955, 040016 (2018)
https://doi.org/10.1063/1.5033680
How to introduce demand side resources in the design of low-carbon power systems in China
AIP Conf. Proc. 1955, 040017 (2018)
https://doi.org/10.1063/1.5033681
Application discussion of source coding standard in voyage data recorder
AIP Conf. Proc. 1955, 040022 (2018)
https://doi.org/10.1063/1.5033686
How the conceptions of Chinese rhetorical expressions are derived from the corresponding generic sentences
AIP Conf. Proc. 1955, 040026 (2018)
https://doi.org/10.1063/1.5033690
Research on the optimization strategy of web search engine based on data mining
AIP Conf. Proc. 1955, 040027 (2018)
https://doi.org/10.1063/1.5033691
Discussion on the management system technology implementation of multimedia classrooms in the digital campus
AIP Conf. Proc. 1955, 040029 (2018)
https://doi.org/10.1063/1.5033693
An improved fast acquisition phase frequency detector for high speed phase-locked loops
AIP Conf. Proc. 1955, 040030 (2018)
https://doi.org/10.1063/1.5033694
Optimal configuration of power grid sources based on optimal particle swarm algorithm
AIP Conf. Proc. 1955, 040031 (2018)
https://doi.org/10.1063/1.5033695
Assessing risk of draft survey by AHP method
AIP Conf. Proc. 1955, 040032 (2018)
https://doi.org/10.1063/1.5033696
No-reference image quality assessment based on statistics of convolution feature maps
AIP Conf. Proc. 1955, 040034 (2018)
https://doi.org/10.1063/1.5033698
Mining algorithm for association rules in big data based on Hadoop
AIP Conf. Proc. 1955, 040035 (2018)
https://doi.org/10.1063/1.5033699
Development and application of deep convolutional neural network in target detection
AIP Conf. Proc. 1955, 040036 (2018)
https://doi.org/10.1063/1.5033700
A new method of hybrid frequency hopping signals selection and blind parameter estimation
AIP Conf. Proc. 1955, 040037 (2018)
https://doi.org/10.1063/1.5033701
An overload behavior detection system for engineering transport vehicles based on deep learning
AIP Conf. Proc. 1955, 040038 (2018)
https://doi.org/10.1063/1.5033702
Face recognition based on two-dimensional discriminant sparse preserving projection
AIP Conf. Proc. 1955, 040039 (2018)
https://doi.org/10.1063/1.5033703
Research on parallel combinatory spread spectrum communication system with double information matching
AIP Conf. Proc. 1955, 040042 (2018)
https://doi.org/10.1063/1.5033706
Underwater electric field detection system based on weakly electric fish
AIP Conf. Proc. 1955, 040043 (2018)
https://doi.org/10.1063/1.5033707
An algorithm of opinion leaders mining based on signed network
AIP Conf. Proc. 1955, 040044 (2018)
https://doi.org/10.1063/1.5033708
MDD diagnosis based on partial-brain functional connection network
AIP Conf. Proc. 1955, 040045 (2018)
https://doi.org/10.1063/1.5033709
An improved initialization center k-means clustering algorithm based on distance and density
AIP Conf. Proc. 1955, 040046 (2018)
https://doi.org/10.1063/1.5033710
The internet of things and the development of network technology in China
AIP Conf. Proc. 1955, 040048 (2018)
https://doi.org/10.1063/1.5033712
Fully convolutional network with cluster for semantic segmentation
AIP Conf. Proc. 1955, 040049 (2018)
https://doi.org/10.1063/1.5033713
Supervised chaos genetic algorithm based state of charge determination for LiFePO4 batteries in electric vehicles
AIP Conf. Proc. 1955, 040050 (2018)
https://doi.org/10.1063/1.5033714
Efficiency of the strong satisfiability checking procedure for reactive system specifications
AIP Conf. Proc. 1955, 040051 (2018)
https://doi.org/10.1063/1.5033715
Real time system design of motor imagery brain-computer interface based on multi band CSP and SVM
AIP Conf. Proc. 1955, 040053 (2018)
https://doi.org/10.1063/1.5033717
Summary of vulnerability related technologies based on machine learning
AIP Conf. Proc. 1955, 040054 (2018)
https://doi.org/10.1063/1.5033718
Research on three-dimensional real scene technology of Sichuan-Tibet highway
AIP Conf. Proc. 1955, 040055 (2018)
https://doi.org/10.1063/1.5033719
Algorithm research for user trajectory matching across social media networks based on paragraph2vec
AIP Conf. Proc. 1955, 040056 (2018)
https://doi.org/10.1063/1.5033720
Research on military application of 3D real scene technology to road into Tibet
AIP Conf. Proc. 1955, 040057 (2018)
https://doi.org/10.1063/1.5033721
Prediction based active ramp metering control strategy with mobility and safety assessment
AIP Conf. Proc. 1955, 040058 (2018)
https://doi.org/10.1063/1.5033722
Genetic algorithm parameters tuning for resource-constrained project scheduling problem
AIP Conf. Proc. 1955, 040059 (2018)
https://doi.org/10.1063/1.5033723
A pre-heating method based on sinusoidal alternating current for lithium-ion battery
AIP Conf. Proc. 1955, 040060 (2018)
https://doi.org/10.1063/1.5033724
Calculation method of water injection forward modeling and inversion process in oilfield water injection network
AIP Conf. Proc. 1955, 040065 (2018)
https://doi.org/10.1063/1.5033729
Warehouse stocking optimization based on dynamic ant colony genetic algorithm
AIP Conf. Proc. 1955, 040068 (2018)
https://doi.org/10.1063/1.5033732
Possible quasi-periodic oscillations of flux density and spectral variability in Quasar 3C 273
AIP Conf. Proc. 1955, 040070 (2018)
https://doi.org/10.1063/1.5033734
A method of operation scheduling based on video transcoding for cluster equipment
AIP Conf. Proc. 1955, 040071 (2018)
https://doi.org/10.1063/1.5033735
Research on channel characteristics of differential multi pulse position modulation without background noise
AIP Conf. Proc. 1955, 040072 (2018)
https://doi.org/10.1063/1.5033736
A study on the application of voice interaction in automotive human machine interface experience design
AIP Conf. Proc. 1955, 040074 (2018)
https://doi.org/10.1063/1.5033738
A research on motion design for APP’s loading pages based on time perception
AIP Conf. Proc. 1955, 040075 (2018)
https://doi.org/10.1063/1.5033739
Analysis of economic benefit of wind power based on system dynamics
AIP Conf. Proc. 1955, 040077 (2018)
https://doi.org/10.1063/1.5033741
Numerical noise analysis for insulator of overhead transmission line
AIP Conf. Proc. 1955, 040080 (2018)
https://doi.org/10.1063/1.5033744
Development of on line automatic separation device for apple and sleeve
AIP Conf. Proc. 1955, 040081 (2018)
https://doi.org/10.1063/1.5033745
Research on crude oil storage and transportation based on optimization algorithm
AIP Conf. Proc. 1955, 040082 (2018)
https://doi.org/10.1063/1.5033746